CipherLab 83 × 0 Series User Guide

Phetolelo ea 1.05
Tokelo ea Copyright © 2003 Syntech Information Co, Ltd.

Selelekela

The 83 × 0 Li-terminals tse nkehang habobebe li-terminals tsa data tse matsutla-tsutla, tse tenyetsehang, tse phahameng tse etselitsoeng letsatsi lohle, ts'ebeliso ea letsatsi le letsatsi. Li tsamaisoa ke betri e nchafatsoang ea Li-ion e nang le hora ea ho sebetsa ho feta lihora tse 100. Li tšehetsoa ke lisebelisoa tse ngata tsa nts'etsopele, ho kenyeletsoa jenereithara ea ts'ebeliso ea Windows, "C" le "Basic" compiler. Ka sesebelisoa sa bona se kopaneng sa Laser / CCD barcode scanning le mochini oa boikhethelo oa RF, the 83 × 0 Li-terminals tse nkehang habobebe li loketse lits'ebetso tsa batch le tsa nako ea nnete joalo ka taolo ea lihlahisoa, taolo ea mabenkele, polokelo le ts'ebetso ea kabo.

HLOKOMELA: Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlano le tšitiso e kotsi ha lisebelisoa li sebelisoa tikolohong ea khoebo. Sesebelisoa sena se hlahisa, se sebelisa ebile se ka hlahisa matla a maqhubu a seea-le-moea, 'me haeba se sa kengoa le ho sebelisoa ho latela bukana ea litaelo, se ka baka tšitiso e kotsi lipuisanong tsa seea-le-moea. Ts'ebetso ea sesebelisoa sena sebakeng sa bolulo e kanna ea baka tšitiso e kotsi mme maemong ao mosebelisi o tla kopuoa ho lokisa tšitiso ka litšenyehelo tsa hae.

Likarolo tse akaretsang le litšobotsi

Litšobotsi tsa mantlha tsa 83 × 0 Series Portable Terminal li thathamisitsoe ka tlase,

Motlakase

• Operation leshala: 3.7V Li-ion betri e ka nchafatsoang, 700mAH kapa 1800mAH (8370 feela).
• Boloka betri: 3.0V, 7mAH betri e ka khutlisoang ea Lithium bakeng sa SRAM le khalendara
• Nako ea ho sebetsa: lihora tse fetang 100 bakeng sa 8300 (batch model); lihora tse fetang 20 bakeng sa 8310 (433MHz RF ea mohlala), lihora tse 8 bakeng sa 8350 (2.4GHz RF ea mohlala), lihora tse 36 bakeng sa 8360 (mohlala oa Bluetooth) le lihora tse 16 bakeng sa 8370 (802.11b).

Tikoloho

• Mongobo o sebetsang: 10% ho isa ho 90% e sa koaeloang
• Mongobo oa polokelo: e sa koaeloang 5% ho 95%
• Thempereichara ea ho sebetsa: -20 ho isa ho 60 C
• Mocheso oa polokelo: -30 ho isa ho 70 C
• Melao ea EMC: FCC, CE le C-tick
• Sho hanyetsa: Lerotholi la 1.2m holim'a konkreite
• Lintlha tsa IP: IP65

Ea nama

• Litekanyo - Batch ea mohlala: 169mm (L) x 77mm (W) x 36mm (H)
• Litekanyo - RF ea mohlala: 194mm (L) x 77mm (W) x 44mm (H)
• Boima - Batch ea mohlala: 230g (ho kenyeletsoa le betri)
• Boima - Mohlala oa RF: 250g (ho kenyeletsoa le betri)
• 'Mala oa bolulo: Batsho
• Thepa ea matloTlhaloso: ABS

CPU

• Toshiba 16-bit CMOS mofuta oa CPU
• Nako e khonehang, ho fihlela 22MHz

Mohopolo

Mohopolo oa lenaneo

• Memori ea Flash ea 1 M e sebelisoa ho boloka khoutu ea lenaneo, fonte, data e sa fetoheng, joalo-joalo. Memori ya data
• Batch ea mohlala (8300): 2M / 4M li-byte SRAM
• Mofuta oa RF (8310/8350/8360/8370): Li-byte tsa 256K tsa SRAM

'Mali

8300 Series Terminal e ka ba le sesebelisoa sa Laser kapa sa Long Range CCD. Bakeng sa mefuta ea batch (8300C / 8300L), lehlakore la lehlaseli la sekene le ka otloloha (0 °) kapa 45 ° ho ea sefofaneng sa LCD. Lintlha tse qaqileng ke tse latelang:

8300L / 8310L / 8350L / 8360L / 8370L (Laser)

• Mohloli oa leseli: e bonahalang Laser diode sebetsa ka 670 ± 15nm
• Sekhahla sa scan: Litekanyetso tse 36 ± 3 ka motsotsoana
• Scan angle: 42 ° ka lebitso
• Bonyane ba khatiso e fapaneng: 20% ponahalo e felletseng ea lefifi / khanya ho 670nm
• Botebo ba lebala: 5 ~ 95 cm, ho latela qeto ea barcode

8300C / 8310C / 8350C / 8360C / 8370C (CCD)

• Qeto: 0.125mm ~ 1.00mm
• Botebo ba lebala: 2 ~ 20cm
• Bophara ba tšimo: 45mm ~ 124mm
• Sekhahla sa scan: 100 scans/mots
• Ho lahloa ha Leseli le Ambient:
  1200 lux (Leseli le tobileng la Letsatsi)
  2500 lux (Leseli la Fluorescent)

Pontšo

• Matheba a li-graph a 128 × 64 a bonts'itsoeng a FSTN LCD a nang le leseli la morao la LED

Keypad

• Linotlolo tsa rabara tse 24 tsa linomoro kapa tse 39 tse nang le alphanumeric.

Sesupo

Buzzer

• Sesebelisoa sa software se ka hlophisoang ka software, 1KHz ho 4KHz, mofuta oa transducer ea motlakase o tlase.

LED

• Moralo o hlophisehang, o mebala e 'meli (o motala le o mofubelu) bakeng sa sesupo sa boemo.

Puisano

• EA-232-RS Sekhahla sa baud ho fihlela ho 115200 bps
• Lethathamo la IR: Sekhahla sa baud ho fihlela ho 115200 bps
• IrDA e tloaelehileng: Sekhahla sa baud ho fihlela ho 115200 bps
• RF ea 433MHz: sekhahla sa data ho fihlela ho 9600 bps
• 2.4GHz RF: sekhahla sa data ho fihlela ho 19200 bps
• Sehlopha sa 1 sa Bluetooth: sekhahla sa data ho fihla ho 433 Kbps
• IEEE-802.11b: sekhahla sa data ho fihlela 11 Mbps

Tlhaloso ea RF

EA-433MHz RF (8310)

• Marang-rang: EA-433.12 ~ 434.62 MHz
• Ho feto-fetoha ha molumo: FSK (Frequency Shift Keying)
• Sekhahla sa Lintlha: 9600 bps
• Litsela tse ka hlophisoang: 4
• Kakaretso: Linepe tsa 200M tsa pono
• Boholo Output Power: 10mW (10dbm)
• Tloaelo: ela ela thelose pontiako

2.4GHz RF (8350)

• Marang-rang: 2.4000 ~ 2.4835 GHz, ISM Band e se nang lengolo
• Mofuta: Maqhubu a Hopping Spread Spectrum Transceiver
• Taolo ea Maqhubu: Ka ho toba FM
• Sekhahla sa Lintlha: 19200 bps
• Litsela tse ka hlophisoang: 6
• Kakaretso: Linepe tsa 1000M tsa pono
• Matla a Phahameng ka ho Fetisisa: 100mW
• Tloaelo: ISM

Bluetooth - Sehlopha sa 1 (8360)

• Marang-rang: 2.4020 ~ 2.4835 GHz
• Ho feto-fetoha ha molumo: GFSK
• Profiles: BNEP, SPP
• Sekhahla sa Lintlha: 433 Kbps
• Kakaretso: Linepe tsa 250M tsa pono
• Matla a Phahameng ka ho Fetisisa: 100mW
• Tloaelo: Mofuta oa Bluetooth. V1.1

EA-802.11b (8370)

• Marang-rang: 2.4 ~ 2.5 GHz
• Ho feto-fetoha ha molumo: DSSS e nang le DBPSK (1Mbps), DQPSK (2Mbps), CCK
• Sekhahla sa Lintlha: 11, 5.5, 2, 1 Mbps ho khutlela morao
• Kakaretso: Linepe tsa 250M tsa pono
• Matla a Phahameng ka ho Fetisisa: 100mW
• Tloaelo: IEEE 802.11b le tumellano ea Wi-Fi

RF Base - 433MHz (3510)

• Base ho amohela: RS-232
• Sekhahla sa Base Baud: ho fihlela ho 115,200 bps
• Base ho Base: RS-485
• Boholo ba li-terminals / Base: 15
• Boholo ba li-terminals / Sisteme: 45
• Boholo ba Mabaka / Sisteme: 16

RF Base - 2.4GHz (3550)

• Base ho amohela: RS-232
• Sekhahla sa Base Baud: ho fihlela ho 115,200 bps
• Base ho Base: RS-485
• Boholo ba li-terminals / Base:99
• Boholo ba li-terminals / Sisteme: 99
• Boholo ba Mabaka / Sisteme: 16

Phihlelo ea Bluetooth (3560)

• Marang-rang: 2.4020 ~ 2.4835 GHz
• Profile: BNEP V1.0 NAP
• Matla a Phahameng ka ho Fetisisa: 100mW
• Khokahano ea Ethernet: 10/100 Base-T (Auto-switch)
• Tsamaiso: TC / PIP, UDP / IP, ARP / RARP, DHCP bakeng sa IPv4
• Boholo ba Li-terminals / AP: Li-terminals tse 7 (Piconet)
• Tloaelo: Mofuta oa Bluetooth. V1.1

Software

• Mokhoa oa tšebetso: CipherLab OS ea khoebo
• Lisebelisoa tsa Lenaneo: "C" compiler, BASIC compiler le Windows-based Application Generator

Lisebelisoa

• Ho tjhaja le mohala oa puisano
• RS-232 cable
• Sesebelisoa sa keyboard wedge
• Adapter ea matla
• Li-ion betri e nchafatsoang
• Seteishene sa 3510/3550 RF
• 3560 Phihlello ea Bluetooth
• Sebaka sa phihlello sa WLAN 802.11b
• Thapo / kholo ea USB
• Motsoako oa modem

Phetolo RF System

Li-ID le Lihlopha

ID ho terminal / base e ts'oana le lebitso ho motho. Seteishene se seng le se seng tsamaisong e tšoanang ea RF se lokela ho ba le ID e ikhethileng. Haeba li-ID li kopitsoa, ​​sistimi e kanna ea se sebetse hantle. Kahoo pele o sebelisa sesebelisoa sa hau sa RF, ka kopo etsa bonnete ba hore terminal e ngoe le e ngoe e na le ID e ikhethileng.

Bakeng sa sistimi ea 433MHz RF, ho fihla ho li-terminals tse 45 le metheo e 16 e ka tšehetsoa ke sistimi e le 'ngoe. ID e nepahetseng e tloha ho 1 ho ea ho 45 bakeng sa li-terminals, le 1 ho isa ho 16 bakeng sa metheo. Ho ts'ehetsa lits'oants'o tsohle tsa 45, metheo ea 433MHz RF e hloka ho hlophisoa ho lihlopha tse 3. Sehlopha se seng le se seng se ka ts'ehetsa li-terminals tse ka bang 15.

• Li-ID tsa Motheo (433MHz): 01 ~ 16
• Li-ID tsa Terminal (433MHz): 01 ~ 45 (lihlopha tse 3)
  01 ~ 15: e tšehelitsoe ke Sehlopha # 1 Mabaka
  16 ~ 30: e tšehelitsoe ke Sehlopha # 2 Mabaka
  31 ~ 45: e tšehelitsoe ke Sehlopha # 3 Mabaka

Bakeng sa sistimi ea 2.4GHz RF, ho fihlela li-terminal tse 99 le metheo ea 16 e ka ts'ehetsoa ke sistimi e le 'ngoe,' me kaofela ke ba sehlopha se le seng.

• Li-ID tsa Motheo (2.4GHz): 01 ~ 16
• Li-ID tsa Terminal (2.4GHz): 01 ~ 99

Setsi sa RF s

Litšobotsi tse ka lokisoang tsa sepetlele ke tse latelang:

Moetso oa 433 MHz RF (8310)

• ID: 01 ~ 45
• Mocha: 1 ~ 4
• Nako ea ho tsoa: 1 ~ 99 metsotsoana, nako ea litlhahlobo bakeng sa ho romella data
• Matla a ho tsoa: 1 ~ 5 maemo (10, 5, 4, 0, -5dBm)
• Batla ka boinotšing: 0 ~ 99 sec, ipatlele mocha o fumanehang ha khokahano ea kanale ea hajoale e lahlehile

Mofuta oa 2.4 GHz RF (8350)

• ID: 01 ~ 99
• Mocha: 1 ~ 6
• Matla a ho tsoa: boholo ba 64mW
• Batla ka boinotšing: 0 ~ 99 sec, ipatlele mocha o fumanehang ha khokahano ea kanale ea hajoale e lahlehile
• Nako ea ho tsoa: 1 ~ 99 metsotsoana, nako ea litlhahlobo bakeng sa ho romella data

Libaka tsa RF

Khokahano e tsoang khomphuteng e amohelang botlaaseng ke RS-232, ha khokahano lipakeng tsa metheo ke RS-485. Ho fihlela metheo e 16 e ka hokahanngoa hammoho tsamaisong e le 'ngoe ea RF. Haeba metheo e 'meli kapa ho feta e hokahane' moho, e hokahantsoeng le komporo e amohelang e lokela ho hlophisoa ka mokhoa o tsoileng matsoho, 'me e meng ka mokhoa oa lekhoba.

Thepa ea Motheo ea 433 MHz (3510)

• Mokhoa: 1-e ikemetseng, lekhoba la 2, 3-master
• Mocha: 1 ~ 4
• ID: 01 ~ 16
• Sehlopha: 1 ~ 3
• Nako ea ho tsoa: 1 ~ 99 metsotsoana, nako ea litlhahlobo bakeng sa ho romella data
• Matla a ho tsoa: 1 ~ 5 maemo (10, 5, 4, 0, -5dBm)
• Sekhahla sa Baud: 115200, 57600, 38400, 19200, 9600

Matlo a motheo a 2.4 GHz (3550)

• Mokhoa: 1-e ikemetseng, lekhoba la 2, 3-master
• Mocha: 1 ~ 6
• ID: 01 ~ 16
• Sehlopha: 1
• Nako ea ho tsoa: 1 ~ 99 metsotsoana, nako ea litlhahlobo bakeng sa ho romella data
• Matla a ho tsoa: boholo ba 64mW
• Sekhahla sa Baud: 115200, 57600, 38400, 19200, 9600

Software Architecture

Software ea 8300 Series Terminal system e na le li-module tse tharo: module ea kernel & Application Manager, module ea System le module ea Application.

Kernel le Motsamaisi oa Kopo

Thollo ke karolo e ka hare-hare ea sistimi. E na le ts'ireletso e phahameng ka ho fetisisa mme e lula e sirelelitsoe ke sistimi. Ke feela ho hloleha ha memori ea flash kapa motlakase o sa nepahalang nakong ea ts'ebetso ea sistimi kamora ho ntlafatsa kernel moo kernel e tla senngoa. Module ea kernel e netefatsa hore basebelisi ba ka lula ba jarolla lenaneo la bona la kopo esita le sistimi e sebetsang e sentsoe ke lenaneo la mosebelisi. Kernel e fana ka lits'ebeletso tse latelang:

• Tlhahisoleseling ea Kernel
  Tlhahisoleseling e kenyelletsa mofuta oa Hardware, nomoro ea serial, letsatsi la tlhahiso, mofuta oa kernel le li-configurations tsa Hardware.
• Mojaro Kopo
  Ho khoasolla lenaneo la kopo, BASIC run-time kapa fonte files.
• Nchafatso ea Kernel
  Ka linako tse ling kernel e ka fetoloa bakeng sa ho ntlafatsa ts'ebetso kapa mabaka a mang. Mosebetsi ona o o lumella ho boloka kernel e ntlafalitsoe. Tsamaiso ea ntlafatso e ts'oana le lenaneo la mosebelisi, empa hlokomela hore kamora ho ntlafatsa kernel, ka kopo o seke oa tima ho fihlela sistimi e qala bocha.
• Teko le Calibrate
  Ho etsa tlhahlobo ea ho chesa le ho bulela oache ea sistimi. Mosebetsi ona ke oa ho etsa feela.
  Ntle le lenane la kernel, haeba ho se na lenaneo la ts'ebeliso le teng, ka nako eo ha o matlafatsa sesebelisoa, menyu e latelang ea Motsamaisi oa Kopo e tla bontšoa:
• Khoasolla
  Ho khoasolla mananeo a ts'ebeliso (*.SHX), BASIC run-time (BC8300.SHX), mananeo a BASIC (*.SYN) kapa fonte files (8xxx-XX.SHX) ho ea boemelong. Ho na le libaka tse 6 tsa baahi le Active Memory e le 'ngoe, ke hore, bonyane mananeo a 7 a ka khoasolloa ho terminal. Empa ke feela e jarollotsoeng ho Active Memory e tla kengoa tšebetsong le ho sebetsa. Ho tsamaisa mananeo a mang, a hloka ho qala pele, empa e le 'ngoe feela ka nako. Hang ka mor'a ho khoasolla, u ka kenya lebitso bakeng sa lenaneo kapa u tobetse feela konopo ea ho kenya ho boloka lebitso la eona la hona joale haeba le le teng. 'Me mofuta oa lenaneo le jarollotsoeng, lebitso le boholo li tla bonts'oa lenaneng ha u kenya menu ea Khoasolla kapa ea ho kenya tšebetsong ea Motsamaisi oa Likopo. The file type ke tlhaku e nyane e latela nomoro ea lenaneo (01~06), e ka ba 'b', 'c' kapa 'f' e emelang lenaneo la BASIC, lenaneo la C kapa fonte. file ka ho latellana. Lebitso la lenaneo le fihla ho litlhaku tse 12 'me boholo ba lenaneo bo lekana le li-byte tsa K.
• Kenya tshebetsong
  Ho kopitsa e 'ngoe ea mananeo a 6 a baahi ho Memori e sebetsang ho e etsa hore e be lenaneo le sebetsang. Kamora ho kenya tshebetsong, lenaneo la mantlha la Memori e Tshebetsang le tla nkelwa sebaka ke le letjha. Ela hloko fonte file e ka se ke ea kengoa tšebetsong, 'me lenaneo la BASIC le ke ke la kengoa tšebetsong haeba nako ea tšebetso ea BASIC e le sieo.
• Kenya
  Ho fetisetsa mananeo a kopo ho PC kapa moamoheli e mong. Mosebetsi o lumella sesebelisoa hore se hlophisoe ntle le ho feta ka PC.

Tsamaiso

Mojule oa sistimi o fana ka lits'ebeletso tse latelang:

1. Boitsebiso

Tlhahisoleseling ea sistimi e kenyelletsa mofuta oa Hardware, nomoro ea serial, letsatsi la tlhahiso, mofuta oa kernel, laeborari ea C kapa mofuta oa nako ea BASIC, mofuta oa lenaneo la kopo le meralo ea li-hardware.

2. Litlhophiso

Litlhophiso tsa sistimi li kenyelletsa tse latelang:

Tshupanako

Seta letsatsi le nako ea sistimi.

Backlight ON Nako

Seta ho lula ha nako bakeng sa keyboard le khanya ea ka morao ea LCD.
Kamehla: mabone a tima kamora metsotsoana e 20.

CPU lebelo

Seta lebelo la CPU. Ho na le mabelo a mahlano a fumanehang: Lebelo le felletseng, lebelo la halofo, lebelo la kotara, lebelo la borobeli le lebelo la leshome le metso e ts'eletseng. Ka botlalo: Lebelo le felletseng

Auto Off

Behantsha nako bakeng sa ho tima motlakase ka bo eona ha ho se ts'ebetso e etsahalang nakong e boletsoeng. Haeba boleng bona bo behiloe ho zero, ts'ebetso ena e tla holofala. Boikhethelo: Metsotso e 10

Likhetho tsa Power On

Ho na le likhetho tse peli tse ka bang teng: Lenaneo le Qalella, le qalang ho tloha lenaneong le neng le sebelisoa nakong ea lenaneo la ho qetela pele motlakase o fela; le Lenaneo la ho qala bocha, le qalang ka lenaneo le lecha.
Ea kamehla: Qalella Lenaneo

Tlanya konopo

Khetha molumo bakeng sa beeper kapa u thibe beeper ha mosebelisi a tobetsa konopo ea konopo Boemo ba mantlha: Numella

Sesebelisoa sa Sistimi

Beha phasewete ho sireletsa mosebelisi ho kenella lenaneng la sistimi. Kamehla: ha ho phasewete e behiloeng

3. Liteko

'Mali

Ho leka ts'ebetso ea ho bala ea scanner. Li-barcode tse latelang ha li khone ho nolofalletsa:

Khoutu 39
Indasteri 25
Kena ka 25
Codabar
Khoutu 93
Khoutu 128
LIEKETSENG UPCE
UPCE le ADDON 2
UPCE le ADDON 5
EAN8
EAN8 le ADDON 2
EAN8 le ADDON 5
EAN13
EAN13 le ADDON 2
EAN13 le ADDON 5
Li-barcode tse ling li tlameha ho fuoa matla ka ho etsa mananeo.

Buzzer

Ho leka buzzer ka maqhubu / nako e fapaneng. Tobetsa KENA senotlolo sa ho qala ebe o tobetsa konopo efe kapa efe ho emisa tlhahlobo.

LCD le LED

Ho leka ponts'o ea LCD le sesupo sa LED. Tobetsa KENA senotlolo sa ho qala ebe o tobetsa konopo efe kapa efe ho emisa tlhahlobo.

Keyboard

Ho leka linotlolo tsa rabara. Tobetsa konopo mme sephetho se tla bontshwa pontshong ya LCD. Hlokomela hore konopo ea FN e lokela ho sebelisoa hammoho le linotlolo tsa linomoro.

Mohopolo

Ho leka memori ea data (SRAM). Ela hloko kamora tlhahlobo, likahare tsa sebaka sa memori li tla hlakoloa.

4. Sehopotso

Boitsebiso ba boholo

Tlhahisoleseling e kenyelletsa boholo ba memori ea mantlha (SRAM), karete ea memori (SRAM) le memory memory (FLASH) ka yuniti ea li-kilobytes

Qala

Ho qala memori ea data (SRAM) Hlokomela se kahare sa sebaka sa data se tla hlakoloa kamora ho qala mohopolo.

5. Matla

Hlahisa voltaglisebelisoa tsa betri ea mantlha le betri ea bekapo.

6. Kopo ea Mojaro

Ho khoasolla lenaneo la kopo, BASIC run-time kapa fonte file. Ho na le likhokahano tse tharo tse tšehetsoeng ke sistimi, e leng, Direct-RS232, Cradle-IR le IrDA e tloaelehileng.

Lenaneo la 7M (433)

Ntho ena e tla bonts'oa ha feela module ea 433MHz RF e kentsoe. Ho na le limenu tse peli haeba ntho ena e khethiloe:

Litlhophiso

Litlhophiso tsa RF le boleng ba tsona ba mantlha ke tse latelang,
ID ea terminal: 01
Sethala sa terminal: 01
Matla a Terminal: 01
Auto Search Nako: 10
Romela Nako ea ho Fela: 02

Liteko

Liteko tsa RF li kenyelletsa tse latelang,

1. Romella Teko
2. Amohela Teko
3. Teko ea Echo
4. Teko ea Channel

7.G ea Menu (2.4)

Ntho ena e tla bonts'oa ha feela module ea 2.4GHz RF e kentsoe. Ho na le limenu tse peli haeba ntho ena e khethiloe:

Litlhophiso

Litlhophiso tsa RF le boleng ba tsona ba mantlha ke tse latelang,
ID ea terminal: 01
Sethala sa terminal: 01
Matla a Terminal: 01
Auto Search Nako: 10
Romela Nako ea ho Fela: 02

Liteko

Liteko tsa RF li kenyelletsa tse latelang,

1. Romella Teko
2. Amohela Teko
3. Teko ea Echo
4. Teko ea Channel

Menyu ea Bluetooth (7)

Ntho ena e tla bontšoa feela haeba module ea Bluetooth e kentsoe. Lenaneo la Bluetooth le kenyelletsa lintho tse latelang:

1. Boitsebiso
2. Ho beha IP
3. Boemo ba BNEP
4. Tshireletso
5. Liteko tsa Echo
6. Patlisiso

Lenaneo la 7.802.11b (8370)

Ntho ena e tla bonts'oa ha feela module ea 802.11b e kentsoe. Lenaneo la 802.11b le kenyelletsa lintho tse latelang:

1. Boitsebiso
2. Ho beha IP
3. Ho beha WLAN
4. Tshireletso
5. Liteko tsa Echo

Kopo

Module ea Kopo e sebetsa ka holim'a module ea System. Li-terminal tsa 83 × 0 Series tse nkehang habobebe li laetsoe esale pele ka lenaneo la nako ea jenereithara ea Kopo mme lenane le latelang le tla bontšoa ha o matlafatsa yuniti:

Batch ea mohlala (8300):

1. Bokella lintlha
2. Kenya data
3. Lisebelisoa

Mefuta ea RF (8310/8350/8360/8370)

1. Nka data
2. Lisebelisoa

Likonopo li ka sebelisoa ho khetha ntho ea menyu, 'me u e phethe ka ho tobetsa konopo ea ENTER.
Hlokomela haeba o sebelisa Sesebelisoa sa Kopo ho theha lenaneo la hau la kopo, o hloka ho le jarollela setulong. Bakeng sa meetso ea RF, o hloka ho sebelisa RF Database Manager ho sebetsana le data e kenang le e tsoang ho PC le ho tsoa. Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho "Tataiso ea Basebelisi ba Lijenereithara tsa Likopo tsa 8300 Series" le "Tataiso ea Basebelisi ba Sesebelisoa sa RF".

Ho hlophisa sesebelisoa

Ho na le lisebelisoa tse tharo tsa software tse fumanehang bakeng sa ho nts'etsapele mananeo a ts'ebeliso ea sesebelisoa.

1. Jenereithara ea Kopo
2. Moqapi oa "BASIC"
3. Moqapi oa "C"

Bakeng sa tlhaiso-leseling e batsi, ka kopo ikopanye le Syntech Information Co, Ltd.

Ho etsa lenaneo la sebaka sa puisano

Sekhahla sa puisano sa 8300 Portable Data Terminal se ts'ehetsa li-interface tsa IR feela. Pele sesebelisoa sa hau sa PC se qala ho buisana le sepetlele ka setloholo sa sona, pele o hloka ho hlophisa lesea ka lenaneo. Ho na le DLL e fumanehang ka morero ona. Bakeng sa tlhaiso-leseling e batsi, ka kopo ikopanye le Syntech Information Co, Ltd.

Ts'ebetso

Batri e tlameha ho ba ncha le ho laeloa hantle pele e qala ho sebetsa.

Tshebetso ya dikonopo

Li-Terminal tsa 8300 li na le libopeho tse peli tsa line: Linotlolo tsa rabara tse 24 le linotlolo tsa rabara tse 39. Mesebetsi ea linotlolo tse khethehileng e tjena:

SEKANANG
Skena barcode.
Tobetsa konopo ena ho tla etsa hore scanner e bale barcode haeba boema-kepe ba scanner bo lumelloa.

KENA
Kena.
Ho na le linotlolo tse peli tsa ho kenya ka lehlakoreng la senotlolo. Ka tloaelo linotlolo tsa ho kena li sebelisetsoa ho phetha taelo kapa netefatso ea ho kenya.

ESC
Phonyoha.
Hangata senotlolo sena se sebelisetsoa ho emisa le ho tsoa ts'ebetsong ea hajoale.

BS
Sebaka sa Morao.
Haeba senotlolo sena se tobetsoa nako e telele ho feta motsotsoana o le mong, ho tla romelloa khoutu e hlakileng.

ALPHA /   
Konopo ea ho fapoha bakeng sa ho kenya alfabeta / lipalo.
Ha sistimi e le ho alpha-mode, lets'oao le lenyane le tla bontšoa skrineng. Bakeng sa keyboard ea linotlolo tse 24, senotlolo ka seng sa linomoro se ka sebelisoa ho hlahisa e 'ngoe ea litlhaku tse tharo tse kholo. Bakeng sa mohlalaample, nomoro ea 2 e ka sebelisoa ho hlahisa A, B kapa C. Ho tobetsa konopo e tšoanang habeli ka motsotsoana o le mong, ho tla bitsa tlhaku B. Ho tobetsa konopo e tšoanang ntle le ho emisa nako e fetang motsotsoana, ho tla etsa hore litlhaku tse tharo li bontšoe tsela e potolohang. Ke feela ha o emisa ho tobetsa konopo nako e telele ho feta motsotsoana o le mong kapa ho tobetsa konopo e 'ngoe, tsamaiso e tla romela khoutu ea sebele ea senotlolo lenaneong la kopo.

FN
Konopo ea mosebetsi.
Konopo ena e ke ke ea ts'oaroa e le mong, e tlameha ho tobetsoa ka konopo e le 'ngoe ho
ka nako yona eo. Bakeng sa mohlalaample, FN + 1 e hlahisa tshebetso #1, FN + 2 e hlahisa tshebetso #2, joalo-joalo (ho fihla ho mesebetsi e 9). Hape, senotlolo sena se ka kopanngoa le linotlolo tsa UP / DOWN tsa motsu ho lokisa phapang ea LCD. 'Me ha senotlolo sena se kopantsoe le senotlolo sa ENTER, se tla bulela / TŠOA lebone la morao.

MATLA
Matla On / Off.
Ho thibela konopo e fosahetseng, e hloka khatello e tsoelang pele ea 1.5 sec ho tima / tima motlakase.

.23. Mokhoa oa kopo

Ena ke mokhoa oa ts'ebetso oa kamehla ha o bulela motlakase. Ts'ebetso e latela module ea kopo. Ka kopo sheba karolo ea 4.4.

Mokhoa oa tsamaiso

Ho kenya lenane la sistimi, o hloka ho tobetsa konopo ea 7, 9 le MATLA linotlolo ka nako e le 'ngoe ha o matlafatsa sesebelisoa. Bakeng sa lintlha tse mabapi le lits'ebeletso tse fanoang ke sistimi, ka kopo sheba karolo ea 4.2.

Mokhoa oa Kernel

Ho kenya lenane la kernel, o hloka ho tobetsa 7, 9 le MATLA linotlolo ka nako e le ngoe ho kenya lenane la sistimi pele, ebe o tima unit ebe o tobetsa 1, 7 le MATLA key ka nako e le ngoe. Kapa haeba betri e sa tsoa jarisoa hape, tobetsa 1, 7 le MATLA key ka nako e le 'ngoe e tla ea ka kotloloho ho kernel. Bakeng sa lintlha tse mabapi le lits'ebeletso tse fanoang ke thollo, ka kopo sheba karolo ea 4.1.

Motsamaisi oa Kopo

Le ha Motsamaisi oa Ts'ebetso e le karolo ea thollo, ho e kenya, o hloka ho tobetsa '8' le MATLA key ka nako e le ngoe. Kapa haeba lenaneo la kopo le le sieo, yuniti e tla ikisa ho menu ea Motsamaisi oa Ts'ebeliso ha e qeta.

Litšebeletso tse tharo: Khoasolla, kenya tšebetsong le ho kenya tse fanoeng ke Motsamaisi oa Kopo li hlalositsoe Karolong ea 4.1. Empa ho thoe'ng haeba u hloka ho ntlafatsa lenaneo kapa ho le hlakola? Maemong ana ka bobeli, o hloka ho khetha Lenaneo la Tjarollo ebe o khetha lenaneo le lokelang ho ntlafatsoa kapa ho hlakoloa. Motsamaisi oa Kopo o bonts'a tlhaiso-leseling e mabapi le lenaneo le khethiloeng joalo ka Lebitso la Lenaneo, Nako ea Tjarollo, memori ea Sebeliso le Flash. Mme ka kopo kenya 'C' ho ntlafatsa lenaneo le khethiloeng, kapa kenya 'D' ho e hlakola.

Ho batle phoso

a) Ha e na matla kamora ho tobetsa konopo ea MATLA.

• Etsa bonnete ba hore betri e laetsoe.
  Nchaja betri ebe u sheba boemo ba ho tjhaja. Haeba ho se na leseli la ho tjhaja le bonts'itsoeng ponts'ong, jarisa betri bocha ebe o sheba hore na betri e kentsoe hantle ebe o leka hape.
• Letsetsa tšebeletso haeba bothata bo ntse bo tsoela pele.

b) Ha e khone ho fetisa data kapa mananeo ka boema-kepe ba puisano ba seteishene.

• Lekola hore na thapo e hoketsoe ka thata, ebe,
• Lekola hore na likarolo tsa puisano tse amohelang (port port, sekhahla sa baud, likotoana tsa data, parity, stop bit) li tšoana le Terminal's.

c) Keypad ha e sebetse hantle,

• Tima motlakase ebe o tobetsa linotlolo tsa 7, 9 le MATLA ka nako e le ngoe ho kenya lenane la sistimi.
• Ho tsoa lenaneng la sistimi, khetha Teko ebe ka mor'a karoloana ea eona ea KBD.
• Etsa tlhahlobo ea senotlolo.
• Haeba bothata bo ntse bo tsoela pele, letsetsa ts'ebeletso.

d) Sesepa ha se hlahlobe,

• Hlahloba hore na li-barcode li sebelisitsoe, kapa
• Hlahloba hore na sesupo sa betri e tlaase se bonts'itsoe pontshong ea LCD. Haeba ho joalo, tjhaja betri.
• Haeba bothata bo ntse bo tsoela pele, letsetsa ts'ebeletso.

e) Likarabo tse sa tloaelehang,

• Bula capu ea betri ebe o kenya betri hape.
• Kenya menyu ea sistimi ka ho tobetsa linotlolo tsa 7, 9 le MATLA ka nako e le ngoe.
• Lekola hore na sesebelisoa se ka ba le karabo e nepahetseng ka ho etsa liteko.
• Haeba bothata bo ntse bo tsoela pele, letsetsa ts'ebeletso.

SINTECH INFORMATION CO., LTD.

Ofisi ea Hlooho: 8F, No. 210, Ta-Tung Rd., Sec. 3, Hsi-Chih, Taipei Hsien, Taiwan
Tel: +886-2-8647-1166 Fax: +886-2-8647-1100
lengolo-tsoibila: tshehetso@cipherlab.com.tw http://www.cipherlab.com.tw

 

CipherLab 83 × 0 Series Tataiso ea Botho - Khoasolla [e ntlafalitsoe]
CipherLab 83 × 0 Series Tataiso ea Botho - Khoasolla

Litšupiso

• Bukana ea Mosebelisi