BOSCH B228 SDI2 8-Input, 2-Output Katoloso Mojule
Litlhaloso
- 8 lintlha/libaka sesebelisoa sa katoloso se hlokometsoeng
- Liphetho tse ling tse 2 tse fetotsoeng
- E hokela ho liphanele tsa taolo ka bese ea SDI2
- E buisana le liphetoho tsohle tsa boemo ba lintlha ho phanele ea taolo
- Lintho tse kenang le liphetho li fihlelleha ka likhokahano tsa li-screw terminal
Polokeho
Tlhokomeliso!
Tlosa matla ohle (AC le betri) pele o etsa likhokahano. Ho hloleha ho etsa joalo ho ka baka kotsi ea motho le/kapa tšenyo ea thepa.
Fetileview
- B228 8-Input, 2-Output Expansion Module ke sesebelisoa sa katoloso se hlokometsoeng sa lintlha tse 8 / libaka tse nang le liphetho tse ling tse 2 tse fetotsoeng tse hokahanyang liphanele tsa taolo ka bese ea SDI2.
- Mojule ona o khutlisetsa phanele ea taolo liphetoho tsohle tsa boemo ba lintlha, 'me liphetho li buloa le ho tima ka taelo e tsoang phanele ea taolo. Lintho tse kenang le tse hlahisoang li fumaneha ka likhokahano tsa li-screw terminal.
Setšoantšo sa 1: Boto bo felileview
| 1 | Ho otla ha pelo LED (blue) |
| 2 | Tamper switch sehokelo |
| 3 | SDI2 likhokahanyo tsa wiring (ho laola phanele kapa li-module tse ling) |
| 4 | SDI2 terminal strip (ho laola phanele kapa li-module tse ling) |
| 5 | Sethala sa terminal (lipoelo) |
| 6 | Tsela ea ho qetela (lintlha) |
| 7 | Li-switches tsa aterese |
Litlhophiso tsa liaterese
- Li-switch tse peli tsa liaterese li khetholla aterese ea mojule oa B228. Sehlopha sa taolo se sebelisa aterese bakeng sa likhokahano. Aterese e boetse e khetholla linomoro tsa tlhahiso.
- Sebelisa screwdriver e slotted ho seta li-switch tse peli tsa aterese.
Hlokomela!
- Mojule o bala litlhophiso tsa switjha ea aterese feela nakong ea ho tima.
- Haeba u fetola li-switches ka mor'a hore u sebelise matla ho mojulung, u tlameha ho potoloha matla ho ea mojuleng ho etsa hore tlhophiso e ncha e khonehe.
- Lokisa li-switches tsa aterese ho ipapisitsoe le ho seta phanele ea taolo.
- Haeba li-module tse ngata tsa B228 li le teng tsamaisong e le 'ngoe, mojule ka mong oa B228 o tlameha ho ba le aterese e ikhethileng. Li-aterese tsa mojule li bontša boleng ba mashome le bo bong ba aterese ea mojule.
- Ha o sebedisa dinomoro tsa diaterese tsa nomoro e le nngwe ho tloha ho 1 ho isa ho 9, seta mashome a switjha ho ya ho 0 le dinomoro tsa tsona ho nomoro e tsamaellanang le yona.
Litlhophiso tsa liaterese ka phanele ea taolo
Liaterese tse sebetsang tsa B228 li itšetlehile ka palo ea lintlha tse lumelloang ke phanele e itseng ea taolo.
| Taolo phanele | Ba palameng dinomoro tsa ntlha | Liaterese tse sebetsang tsa B228 | Ngollanalinomoro tsa lintlha |
| ICP-SOL3-P ICP-SOL3- APR
ICP-SOL3-PE |
01 - 08 | 01 | 09 - 16 |
| ICP-SOL4-P ICP-SOL4-PE | 01 - 08 | 01
02 03 |
09 - 16
17 - 24 25 - 32 |
| 01 - 08 (3K3)
09 - 16 (6K8) |
02
03 |
17 - 24
25 - 32 |
|
| 01 - 08 (3K3)
09 - 16 (6K8) |
02 | 17 - 24 (3K3)
25 - 32 (6K8) |
Ho kenya
Ka mor'a hore u behe li-switches tsa aterese bakeng sa aterese e nepahetseng, kenya mojule ka har'a sekoahelo, ebe u o kenya ka terata ho phanele ea taolo.
Beha mojule sebakeng se koaletsoeng
Kenya mojule ka har'a mokhoa oa ho kenya likoti tse 3 tsa sebaka se kampetsoeng u sebelisa likurufu tse fanoeng le borakete e ntseng e holisoa.
Ho kenya mojule sebakeng se kentsoeng
| 1 | Mojule o kentsoeng bracket e ntseng e eketseha |
| 2 | Sebaka se koaletsoeng |
| 3 | Lisebelisoa tse ntseng li hola (3) |
Thaba le terata tampfapoha
U ka hokela lemati le kampetsoeng ka boikhethelo tamper switch bakeng sa mojule o le mong sebakeng se koaletsoeng. St
- Ho kenya khetho ea tamper switch: Hloma ICP-EZTS Tamper Fetola (P/N: F01U009269) ho kena ka har'a tamper switjha mounting sebaka. Bakeng sa litaelo tse felletseng, sheba ho EZTS Cover le Wall Tamper Phetoho ea ho Kena Tataiso (P/N: F01U003734)
- Hokela tampho fetola terata ho t ea mojuleamper switch sehokelo.
Khoele ho phanele ea taolo
Hokela module ho phanele ea taolo u sebelisa e 'ngoe ea mekhoa e ka tlase, empa u se ke oa e sebelisa ka bobeli.
- SDI2 interconnect wiring connectors, terata e kenyelelitsoe
- SDI2 terminal strip, e ngotsoeng ka PWR, A, B, le COM
Lithapo tsa khokahanyo li tsamaisana le li-terminals tsa PWR, A, B, le COM leboteng la theminale.
Hlokomela!
Ha o hokela li-module tse ngata, kopanya li-terminal strip le li-interconnect wiring connectors ka letoto.
Ho sebelisa likhokahano tsa likhokahano tsa likhokahano tsa likhokahano tsa SDI2
| 1 | Lekhotla la taolo |
| 2 | Module oa B228 |
| 3 | Khokahano ea thapo (P/N: F01U079745) (e kenyelelitsoe) |
Ho sebelisa terminal strip
| 1 | Lekhotla la taolo |
| 2 | Module oa B228 |
Likhoele tse tsoang ho loop
- Ho na le li-terminals tse 3 bakeng sa liphetho.
- Liphetho tse peli OC1 le OC2 li arolelana terminal e le 'ngoe e tloaelehileng e ngotsoeng +12V. Liphetho tsena tse peli ke liphetho tse fetotsoeng ka boikemelo, 'me mefuta ea tsona ea tlhahiso le mesebetsi e tšehetsoa ke phanele ea taolo.
- Ha o sebelisa li-detectors, liphetho tse fetotsoeng li fana ka SDI2 voltagmatla a fetang 100 mA.
Sensor loop wiring
Ho hanyetsa ha lithapo ho lupu e 'ngoe le e' ngoe ea sensor, ha e hokahane le lisebelisoa tsa ho lemoha, e lokela ho ba ka tlase ho 100Ω.
Module ea B228 e lemoha maemo a potoloho a bulehileng, a khutšoanyane, a tloaelehileng le a fatše holim'a li-loops tsa sensor ea eona ebe o fetisetsa maemo ana ho phanele ea taolo. Loop e 'ngoe le e' ngoe ea sensor e fuoa nomoro e ikhethang ea sebaka / sebaka mme e fetisetsoa ka bonngoe ho phanele ea taolo. Netefatsa hore terata e tsamaisitsoe hole le mehala ea mohala le ea AC kahare ho meaho.
Setšoantšo sa 4: Li-loops tsa sensor
| 1 | Sebaka se se nang mohanyetsi |
| 2 | Ho kenya sebaka se le seng |
| 3 | Libaka tse peli tse nang le tamper |
| 4 | Likenyo tsa libaka tse habeli |
Litlhaloso tsa LED
Mojule ona o kenyelletsa LED e le 'ngoe ea ho otla ha pelo e putsoa ho bontša hore mojule o na le matla le ho bontša boemo ba hajoale ba module.
| Mohlala oa Flash | Mosebetsi |
| E benya hang ka motsotso o mong le o mong | Boemo bo tlwaelehileng: E bontša boemo bo tloaelehileng ba ts'ebetso. |
| 3 e phatsimang ka potlako
metsotsoana e meng le e meng e 1 |
Boemo ba phoso ea puisano: E bontša (mojule o boemong ba "ha ho na puisano") e bakang phoso ea puisano ea SDI2. |
| ON E tsitsitseng | Boemo ba bothata ba LED:
|
| TLOA E tsitsitseng |
Mofuta oa Firmware
Ho bonts'a mofuta oa firmware o sebelisa mohlala oa flash oa LED:
- Haeba khetho ea tamper switch e kentsoe:
- Ha lemati le koetsoeng le butsoe, kenya tamper switch (tobetsa le ho lokolla switch).
- Haeba khetho ea tamper switch HA E KEntsoe:
- Ka nakoana e khuts'oane tamper pins.
Ha tamper switch e kentsoe tšebetsong, ho otla ha pelo ha LED ho lula HO TLOHILE metsotsoana ea 3 pele e bontša mofuta oa firmware. LED e hlahisa linomoro tse kholo, tse nyane, le tse nyane tsa mofuta oa firmware, ka khefutso ea motsotsoana o le mong ka mor'a nomoro ka 'ngoe.
ExampLe:
Mofuta oa 1.4.3 o bonts'a e le mabone a LED: [Khefutso ea metsotsoana e 3] *___****___*** [khutso ea metsotsoana e 3, ebe ke ts'ebetso e tloaelehileng].
Lintlha tsa tekheniki
Motlakase
| Tšebeliso ea hona joale (mA) | 30 mA |
| Lebitso voltage (VDC) | 12 VDC |
| Sephetho voltage (VDC) | 12 VDC |
Mechini
| Litekanyo (H x W x D) (mm) | 73.5 mm x 127 mm x 15.25 mm |
Tikoloho
| Thempereichara ea ho sebetsa (°C) | 0 °C | - 50 | °C |
| Mongobo o sebetsang, o sa fokotseheng (%) | 5% - | 93% | |
Khokahano
| Lisebelisoa tsa loop | Mahokelo a kentsweng e ka ba Ka tlwaelo e Buletsweng (NO) kapa e Tlwaelehileng ka Tlwaelo (NC). TSEBISO! Ka tloaelo e Koetsoe (NC) ha e lumelloe lits'ebetsong tsa Mollo. |
| Loop End-of-Line (EOL) khanyetso |
|
| Arola EOL3k3 / 6k8 ka tamper | |
| Arola EOL3k3 / 6k8 |
| Khanyetso ea lithapo tsa loop | 100 Ω boholo |
| Boholo ba terata ea terminal | 12 AWG ho isa ho 22 AWG (2 mm ho isa ho 0.65 mm) |
| Wiring ea SDI2 | Bohole bo boholo - Saese ea terata (terata e sa sireletsoang feela):
|
- Bosch Security Systems BV
- Torenallee 49
- 5617 BA Eindhoven
- Netherlands
- www.bbatselo.net
- © Bosch Security Systems BV, 2024
Ho aha litharollo tsa bophelo bo betere
- 2024-06
- V01
- F.01U.424.842
- 202409300554
LBH
- P: Ke lokela ho etsa'ng haeba ke hloka ho fetola litlhophiso tsa aterese ka mor'a ho tima?
- A: Haeba u fetola li-switches ka mor'a hore u matlafatse, potoloha matla ho ea ho module ho etsa hore ho be le maemo a macha.
- P: Ke li-module tse kae tsa B228 tse ka bang teng tsamaisong e le 'ngoe?
- A: Haeba ho sebelisoa li-module tse ngata tsa B228, mojule ka mong o tlameha ho ba le aterese e ikhethileng.
Litokomane / Lisebelisoa
 |
BOSCH B228 SDI2 8-Input, 2-Output Katoloso Mojule [pdf] Tlhophiso Tataiso B228-V01, B228 SDI2 8 Input 2 Output Expansion Module, B228, SDI2 8 Input 2 Output Extention Module, 8 Input 2 Mojule ea Katoloso ea Sephetho, Mojule oa Katoloso, Mojule. |
