Litaba
pata
BLUSTREAM HD11CTRL-V2 HDMI In Line controller
Litlhaloso
- Tharollo ea taolo ea kamore e ikemetseng bakeng sa matšoao a HDMI
- Laola ka CEC, RS-232, IR, kapa IP
- E tšehetsa tšebeliso ea HDMI, HDCP 2.2, ho otlolla oache, EDID, le ho ts'oarana ka matsoho
- E tšehetsa HDMI 2.0 le HDCP 2.2
- Liqeto tsa video ho fihla ho 4K @ 60Hz 4:4:4
- Likarolo a web-GUI bakeng sa taolo le tlhophiso
Litaelo tsa Tšebeliso ea Sehlahisoa
Web-GUI Control
HD11CTRL-V2 e na le sesebelisoa se hahelletsoeng kahare web-GUI bakeng sa taolo le tlhophiso. Lintlha tsa ho kena ka ho sa feleng ke:
- Username: blustream
- Lebitso la lekunutu: 1234
- Aterese ea IP ea kamehla: 192.168.0.200
Bakeng sa lintlha tse ling, sheba buka ea mosebelisi e fumanehang ho Blustream websebaka.
RS-232 Configuration
Boema-kepe ba RS-232 bo lumella tlhophiso le taolo ea sehlahisoa.
Litlhophiso tsa kamehla tsa puisano ke:
- Lebelo la Baud: 57600
- Bonyane ba data: 8
- Emisa Bit: 1
- Parity Bit: ha ho letho
Bakeng sa lenane le felletseng la litaelo, sheba bukana ea mosebelisi ho Blustream websebaka.
Tsamaiso ea EDID Dip-switches
Li-switches tsa EDID dip phanele e ka pele li lumella ho fetola maemo a EDID. Sheba tafole e ka tlase bakeng sa litlhophiso:
-
- 1080p 60Hz 2.0ch – 00000001
- 1080i 60Hz 7.1ch – 01101110
Software EDID preset e lumella khetho ka web GUI kapa ho jarolla ka tloaelo.
LBH
- P: Nka seta sesebelisoa joang ho li-setting tsa feme?
A: Ho seta bocha ho li-setting tsa feme, kena ho web-GUI 'me u tsamaee ho ea ho reset khetho tlas'a li-setting. - P: A na nka sebelisa boema-kepe ba RS-232 bakeng sa liapdeite tsa firmware?
A: Che, boema-kepe ba RS-232 bo reretsoe merero ea tlhophiso le taolo feela. Lintlafatso tsa firmware li lokela ho etsoa ka mekhoa e meng e boletsoeng bukeng ea mosebelisi.
Tlhaloso: HD11CTRL-V2
Quick Reference Guide
Selelekela
- HD11CTRL-V2 HDMI in-line controller ea rona ke tharollo ea taolo ea kamore e ikemetseng e kenyelletsang ho bonts'a / ho tima taolo ka CEC, RS-232, IR kapa IP ha lets'oao la HDMI le utloahala ho kenyelletsoeng. Lisebelisoa tsa ka ntle tsa relay li lumella lintho tse susumetsang batho ba bang hore li hokahane le lisebelisoa tse kang li-sensor kapa li-switches.
- HD11CTRL-V2 e tla boela e thuse ka ho lumellana ha HDMI, HDCP 2.2, ho otlolla oache, EDID le litaba tsa ho tšoara matsoho tse ka bakang mathata ha ho aba matšoao a HDMI, haholo-holo 4K. HD11CTRL-V2 e ts'ehetsa HDMI 2.0 e felletseng le HDCP 2.2, e nang le liqeto tsa video ho fihlela le ho kenyelletsa 4K @ 60Hz 4:4:4, 'me e na le web-GUI bakeng sa taolo le tlhophiso.
LIKAROLOANA:
- Mojule oa taolo oa HDMI o ikemetseng o ts'ehetsa ho fihla ho li-macros tse 10, tse nang le mesebetsi e fihlang ho tse 10 ka taelo e 'ngoe le e 'ngoe.
- E ts'ehetsa litlhaloso tsa HDMI 2.0 18Gbps ho kenyelletsa le HDR
- E ts'ehetsa liqeto ho fihla ho 4K UHD 60Hz 4:4:4
- E ts'ehetsa liforomo tsohle tse tsebahalang tsa HDMI tse kenyelletsang Dolby TrueHD, Atmos le DTS-HD Master Audio phetiso
- Likarolo tsa theknoloji ea Smart-Scale ho fetolela lets'oao la 4K ho 1080p tlhahiso (Hlokomela: 4:2:2 sebaka sa mebala ha se tšehetsoe)
- E ka thusa ho rarolla mathata a mangata a HDMI EDID, HDCP, tšebelisano 'moho le ho ts'oarana ka matsoho
- Taolo ea ponts'o e iketsang ka CEC, RS-232, IR kapa IP
- IR e ithuta ho fihla ho litaelo tse 30 tsa IR
- Taolo ea phetisetso bakeng sa sebopeho sa lisebelisoa tsa motho oa boraro joalo ka li-skrini tsa projeke
- Kenyelletso ea mats'oao bakeng sa khokahano ho tsoa ho lisebelisoa tsa batho ba bang joalo ka lisensara kapa li-switches
- HDCP 2.2 e tsamaellana le taolo e tsoetseng pele ea EDID
- E ahiloeng web-GUI bakeng sa tlhophiso le taolo
Phanele e ka pele
- Power LED Indicator - E khantša ha sesebelisoa se tsamaisoa
- HDMI Output LED Indicator - E khantša ha sesebelisoa se na le khokahanyo e sebetsang ho pontšo
- IR Ho Ithuta IR In - Moamoheli oa IR o sebelisetsoang ho ithuta litaelo tsa IR ho sebelisoa ka auto on / off trigger
- IR Learning IR On LED - E benya boputsoa ha sesebelisoa se le mokhoeng oa ho ithuta oa IR - bua ka Buka ea Mosebelisi bakeng sa ts'ebetso ea ho ithuta ea IR.
- IR Learning IR Off LED - E benya boputsoa ha sesebelisoa se le mokhoeng oa ho ithuta oa IR - bua ka Buka ea Mosebelisi bakeng sa ts'ebetso ea ho ithuta ea IR.
- Konopo ea ho Ithuta ea IR - Tobetsa ho nolofalletsa mokhoa oa ho ithuta oa IR - sheba Buka ea Mosebelisi bakeng sa mosebetsi oa ho ithuta oa IR
- Liphetoho tsa EDID DIP - Fetola tlhophiso ea EDID bakeng sa kenyelletso ea mohloli - sheba tafole ea EDID dip switch table.
- USB Upgrade Port - Sehokelo sa USB se sebelisetsoang lintlafatso tsa firmware
Panele e ka morao
- Ho Kena ha HDMI - Hokela ho sesebelisoa sa mohloli oa HDMI
- HDMI Output – Hokela ho sesebediswa sa pontsho sa HDMI (e tshehetsa CEC)
- IR Output - 3.5mm mono jack e fana ka tlhahiso ea IR ho sesebelisoa
- Signal Sense Input (12V) - 3 pin sehokelo sa Phoenix ho hokela sensor ea kantle kapa switjha.
- Relay 1 ~ 2 - 3-pin Phoenix sehokelo ho lumella taolo ea phepelo ea sesebelisoa joalo ka skrini sa projeke.
- TCP / IP - RJ45 sehokelo bakeng sa TCP / IP le web-GUI taolo ea Matrix
- Power Port - Sebelisa adaptara ea 12V/1A DC ho matlafatsa sesebelisoa
- RS-232 Serial Port - 3-pin Phoenix sehokelo bakeng sa taolo ea sesebelisoa ka sistimi ea motho oa boraro
Web-GUI Control
- HD11CTRL-V2 e na le sesebelisoa se hahelletsoeng kahare web-GUI e ka sebelisoang ho laola le ho hlophisa sesebelisoa. Ka kamehla HD11CTRL-V2 e setetsoe ho DHCP, leha ho le joalo haeba seva sa DHCP (mohlala: router ea marang-rang) e sa kengoa, aterese ea IP ea matrix e tla khutlela ho lintlha tse ka tlase:
- Lebitso la kamehla ke: blustream
- Lekunutu la kamehla ke: 1234
- Aterese ea IP ea kamehla ke: 192.168.0.200
- Bakeng sa tlhaiso-leseling e batsi ka kopo bona Bukana ea Mosebelisi ea HD11CTRL-V2 - e fumaneha ho khoasolla ho tsoa ho Blustream websebaka.
RS-232 Configuration
- Boema-kepe ba RS-232 bo ka sebelisoa bakeng sa tlhophiso le taolo ea sehlahisoa, hammoho le ho lumella litaelo tsa taolo tse hlophisitsoeng ho romelloa sesebelisoa se hokahaneng sa RS-232.
- Litlhophiso tsa kamehla tsa puisano tsa RS-232 ke:
- Lebelo la Baud: 57600
- Bonyane ba data: 8
- Emisa Bit: 1
- Parity Bit: ha ho letho
- Bakeng sa lenane le felletseng la litaelo tsa RS-232 ka kopo bona Bukana ea Mosebelisi ea HD11CTRL-V2 - e fumanehang ho khoasolla ho tsoa ho Blustream websebaka.
Tsamaiso ea EDID Dip-switches
- EDID (Extended Display Identification Data) ke sebopeho sa data se sebelisoang lipakeng tsa pontšo le mohloli. Lintlha tsena li sebelisoa ke mohloli ho fumana hore na liqeto tsa audio le tsa video li tšehetsoa ke ponts'o ebe ho tsoa tlhahisoleseling ena mohloli o tla tseba hore na qeto e ntle ka ho fetisisa ke efe.
- Ho fetola litlhophiso tsa EDID, tsamaisa li-switches tsa EDID dip-switch joalo ka ha ho hlokahala phanele e ka pele ea yuniti. Ka kopo, sheba tafole e ka tlase bakeng sa litlhophiso.
- Software EDID preset e lumella khetho ea EDID ka lisebelisoa web GUI, kapa bakeng sa EDID e tloaelehileng hore e kenngoe ho HD11CTRL-V2. Sena se sebelisetsoa mehloli e ka hlahisang liqeto tse sa tloaelehang kapa lifomate tsa video.
| 3 | 2 | 1 | 0 | Mofuta oa EDID |
| Motsoako oa maemo a DIP | ||||
| 0 | 0 | 0 | 0 | 1080p 60Hz 2.0ch |
| 0 | 0 | 0 | 1 | 1080p 60Hz 5.1ch |
| 0 | 0 | 1 | 0 | 1080p 60Hz 7.1ch |
| 0 | 0 | 1 | 1 | 1080i 60Hz 2.0ch |
| 0 | 1 | 0 | 0 | 1080i 60Hz 5.1ch |
| 0 | 1 | 0 | 1 | 1080i 60Hz 7.1ch |
| 0 | 1 | 1 | 0 | 4K 60Hz 4:2:0 2.0ch |
| 0 | 1 | 1 | 1 | 4K 60Hz 4:2:0 5.1ch |
| 1 | 0 | 0 | 0 | 4K 60Hz 4:2:0 7.1ch |
| 1 | 0 | 0 | 1 | 4K 60Hz 4:4:4 2.0ch |
| 1 | 0 | 1 | 0 | 4K 60Hz 4:4:4 5.1ch |
| 1 | 0 | 1 | 1 | 4K 60Hz 4:4:4 7.1ch |
| 1 | 1 | 0 | 0 | DVI 1920×1080@60Hz |
| 1 | 1 | 0 | 1 | DVI 1920×1200@60Hz |
| 1 | 1 | 1 | 0 | EDID Pass-through |
| 1 | 1 | 1 | 1 | Tsamaiso ea Software |
Litlhaloso
Tlhaloso: HD11CTRL-V2
- Lihokelo tsa ho Kena ka Video: 1 x HDMI Mofuta oa A, 19-pin, basali
- Li-Connectors tsa Video Output: 1 x HDMI Mofuta oa A, 19-pin, basali
- RS-232 Serial Port: 1 x 3-pin sehokelo sa Phoenix
- TCP / IP Control Port: 1 x RJ45, mosali
- IR Output Port: 1 x 3.5mm mono jack
- Taolo ea Relay: 2 x 3-pin Phoenix sehokelo
- Kenyelletso ea Sensor: 1 x 3-pin sehokelo sa Phoenix
- Khetho ea EDID: 4-pin DIP Switch
- Ntlafatso ea Sehlahisoa: 1 x USB Type A, e tšehali
- Litekanyo (W x H x D): 145mm x 28mm x 84mm
- Boima ba Thomello: 1.0kg
- Mocheso oa ho sebetsa: 32°F ho isa ho 104°F (0°C ho isa ho 40°C)
- Mocheso oa Polokelo: - 4°F ho isa ho 140°F (- 20°C ho isa ho 60°C)
- Phepelo ea Matla: 12V/1A DC
HLOKOMELA: Litlhaloso li ka fetoha ntle le tsebiso. Boima ba 'mele le litekanyo li hakanyetsoa.
Litaba tsa Sephutheloana
Tlhaloso: HD11CTRL-V2
- 1 x HD11CTRL-V2
- Phepelo ea Matla a 1 x 12V/1A DC
- 1 x Emitter ea IR
- 1 x RS-232 Control Cable
- 1 x Ho kenya Kit
- 1 x Quick Reference Guide
Setifikeiti
TSEBISO FCC
- Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
TLHOKOMELO – diphetoho kapa diphetoho tse sa dumellwang ka ho hlaka ke mokga o ikarabellang bakeng sa boikamahanyo di ka senya matla a mosebedisi a ho sebedisa thepa.
CANADA, INDUSTRY CANADA (IC) TSEBISO
Sesebelisoa sena sa dijithale sa Sehlopha sa B se lumellana le Canadian ICES-003.
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso, le
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
HO LAHLWA KA NTLE HO SEHLAHLWA ENA
Letšoao lena le bontša hore sehlahisoa sena ha sea lokela ho lahleloa le litšila tse ling tsa ntlo. Ho thibela kotsi e ka bang teng tikolohong kapa bophelong ba batho ho lahleloeng ho sa laoleheng ha litšila, e sebelisa hape ka mokhoa o nang le boikarabelo ho khothaletsa tšebeliso e tsitsitseng ea lisebelisoa. Ho khutlisa sesebelisoa seo u se sebelisitseng, ka kopo sebelisa mokhoa oa ho khutlisa le ho bokella kapa ikopanye le morekisi moo sehlahisoa se rekiloeng teng. Ba ka nka sehlahisoa sena bakeng sa ho sebelisoa hape ho sireletsehileng tikolohong.
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
Ikopanye le: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Litokomane / Lisebelisoa
 |
BLUSTREAM HD11CTRL-V2 HDMI In Line controller [pdf] Bukana ea Mosebelisi HD11CTRL-V2 HDMI In Line controller, HD11CTRL-V2, HDMI In Line controller, In Line controller, molaoli |
 |
BLUSTREAM HD11CTRL-V2 HDMI In Line Controller [pdf] Bukana ea Mosebelisi HD11CTRL-V2 HDMI In Line Controller, HD11CTRL-V2, HDMI In Line Controller, In Line Controller, Line Controller, Controller |
 |
BLUSTREAM HD11CTRL-V2 HDMI In-line Controller [pdf] Bukana ea Mosebelisi HD11CTRL-V2 HDMI In-line Controller, HD11CTRL-V2, HDMI In-line Controller, In-line Controller, Controller |
