BEKA Advisor A90 Modbus Interface
Selelekela
Tataiso ena e fana ka lintlha tsohle tse hlokahalang ho sebelisa metara ea rona ea ts'ebetso ea Advisor A90 ts'ebetsong ea Modbus. Bakeng sa tlhahisoleseding ea ho kenya hardware, ka kopo sheba libuka tsa litaelo tse arohaneng tse fumanehang bakeng sa mofuta o mong le o mong.
Ke eng e ka Tataisong ena ea Modbus Interface
- Ho fedileview ea seletsa ka seng
- Tlhaloso ea li-parameter tse sebetsang ho sesebelisoa ka seng
- Litaelo tsa ho sebelisa sesebelisoa ka mokhoa oa sona o tloaelehileng
Ke Eng e ka Libukang Tsa Litaelo
- Ho fedileview ea seletsa
- Moralo oa Sisteme le ho Kenya
- Tlhophiso
- Tlhokomelo
Mehloli e meng ea tlhahisoleseling
Ea rona website at www.beka.co.uk e lula e le morao-rao ka lingoliloeng le tlhaiso-leseling ea morao-rao Kamora ho bala bukana ena, haeba u ntse u na le bothata ba ho fumana liphetho tseo u li hlokang, re romelle imeile ho support@beka.co.uk mme re tla etsa sohle se matleng a rona ho thusa
Sehlahisoa se Felletseview
Tlhaloso e qaqilengview ea seletsa e fanoe bukeng ea litaelo bakeng sa sehlahisoa ka seng. Sena se lokela ho baloa pele o kenya tšebetsong sistimi efe kapa efe e sebelisang lisebelisoa tsena, leha ho le joalo kakaretso ea likarolo tsa mantlha e thathamisitsoe ka tlase:
Mosebetsi
Advisor A90 Universal Panel Meter ke sesebelisoa se bonts'ang sa mebala e mehlano, se reretsoeng ho bonts'a sejoale-joale.tage kapa pontšo ea ts'ebetso ea analogue ea ho hanyetsa likarolong tsa boenjiniere. Sesebelisoa se ka boela sa bontša mocheso ka ho toba ho tloha ho thermometer ea ho hanyetsa. A90 e ka lokisoa sebakeng sa marang-rang ka ho sebelisa likonopo tse 'ne tse ka pele tsa li-push le menu e hlakileng e ka sireletsoang ka khoutu ea ts'ireletso ho thibela phetoho ka phoso.
Pontšo
Advisor A90 Process Panel Meter e sebelisa mokhoa o mocha o lumellang ponts'o hore e be 'mala ofe kapa ofe ka morao o motšo, o ka baloa maemong ohle ho tloha lefifing le felletseng ho isa ho khanya ea letsatsi. Ponahalo e matla e ka feto-fetoha ka botlalo hore e tsamaellane le lisebelisoa tse ling le ho boloka pono ea bosiu ea opareitara.
Ha e kentsoe li-alamo tsa boikhethelo, 'mala oa ponts'o o ka amahanngoa le boemo ba alamo. Bakeng sa mohlalaample, ponts'o e tala e ka bonts'a ts'ebetso e tloaelehileng, 'mala oa ponts'o o fetoha o mofubelu ha alamo e phahameng e hlaha le ho ba boputsoa ha alamo e tlase e etsahala.
Kenyelletso ea Analogue
Mofuta oa lisebelisoa le sebaka li ka khethoa sebakeng sa marang-rang 'me ponts'o ea methara e ka lekanyetsoa ho bonts'a phapang ea boenjiniere e emeloang ke tlhahiso ea analogue. Likarolo tsa tekanyo tsa boenjiniere tse kang lik'hilograma, lilithara/hora kapa ºC, li ka hatisoa ho slide-in scalecard.
E 'ngoe ea mekhahlelo e latelang e ka khethoa:
Moqtagkenya
0 ho isa ho 100 mV
0 ho 1V
0 ho 10V
Kenyelletso ea hajoale
4 ho 20mA
0 ho 50mA
Kenyelletso ea thermometer ea ho hanyetsa
2 kapa 3 terata e hokahantsoeng PT100 thermometer ea ho hanyetsa, kapa phapano e tsoang ho li-thermometer tse peli tsa PT100 tse hanyetsang. -200 ho isa ho 850ºC
Ho fetola mofuta oa ho kenya ho tla khutlisetsa Panel Meter ho li-setting tsa eona tsa kamehla bakeng sa kenyelletso eo.
Litlhahiso tsa Alamo tseo u ka li khethang
Ho na le liphetho tse peli tsa phetoho ea relay e fumanehang. Tsena li qheletsoe ka thoko 'me li matlafatsoa kapa li felloa ke matla ka boikemelo ho latela maemo a li-Alarm set-points. Tsena li KA SE tlosoe ka ho fana ka litaelo tsa Modbus.
Sehlahisoa sa boikhethelo sa Analogue
Ho na le sehlahisoa se ikhethileng sa analogue se hlophisitsoeng e le sink ea hajoale. Sehlahisoa sena se ka hlophisoa hore se arabele tlhahiso ea analogue, 'me E KA SE tlosoe ka ho fana ka litaelo tsa Modbus. Khetho ena e boetse e tla le phepelo ea motlakase e ka thoko ea 24V DC e ka sebelisoang ho fana ka loop ea hajoale ea 4-20 mA.
Ts'ebetsong ea Modbus
Ts'ebetsong ea Modbus ho Moeletsi e na le merero e mengata.
E fana ka litšebeletso tse latelang ho Modbus Master (PLC, PC kapa tse tšoanang):
- Lekola phetoho ea ts'ebetso e lekantsoeng ka sesebelisoa
- Hlalosa boemo ba sesebelisoa (boemo ba lialamo, boemo ba Tare Activation,…)
- Lokisa sesebelisoa u le hole
Sehokelo sa Modbus se fumaneha e le mojule oa boikhethelo ho Advisor A90. Protocol e tšehetsoeng ke Modbus RTU (Modbus ho feta RS485). Hlokomela hore mofuta oa ASCII oa protocol ha o so sebelisoe.
A90 e sebetsa feela e le lekhoba marang-rang, e sebetsana le likopo tse tsoang ho Monghali ea hole. Multidrop mode e tšehetsoa ka hore ho ka ba le lisebelisoa tse fetang tse le 'ngoe (A90 kapa tse ling) ka beseng.
Mekhelo
Ha ho khonehe ho lokisa sehlahisoa sebakeng sa heno le ka thōko ka nako e le 'ngoe. Haeba mosebelisi a ntse a tsamaea ka har'a menyetla, mokhelo oa Modbus Busy o tla phahamisoa ho Master.
Monghali a ke ke a sebelisoa ho fetisa mohopolo oa kahare oa sesebelisoa. Bakeng sa mohlalaample, ha ho khonehe ho laola Liphetho tsa Alamo ka kotloloho, ho bala likonopo tsa letlapa la likonopo kapa ho laola boleng bo bontšitsoeng ka Modbus.
Monghali a ke ke a hlakola lits'ebetso tse reretsoeng ho etsahala sebakeng sa heno. Bakeng sa mohlalaample liketso tse joalo ka Ho khutsisa Alarms, Input Calibration, Temperature Trimming, Input Taring ha li fumanehe ka Modbus.
Mofuta oa Input ha o ngoloe ke Monghali kaha ho fetola mofuta oa ho kenya ho na le phello ea ho khutlisetsa sehlahisoa ho mefokolo, ho baka mathata a maholo.
Lisebelisoa
Lera la lisebelisoa tsa 'mele ke sebopeho sa 2 wire RS485. A90 e tla bona likopo tsohle tse tsoang ho mong'a eona le karabo e 'ngoe le e' ngoe e tsoang ho lisebelisoa tse ling tse ka beseng. Tsena li hlokomolohuoa ntle le haeba kopo e lebisitsoe yuniti ka kotloloho.
Litlhophiso tsa puisano tsa RS485 li ka lokisoa sebakeng sa heno ho sesebelisoa ka ho kena ho submenu ea "Ser" kapa ka lirejisete tse inehetseng tsa ho ts'oara. Li-setting tse latelang li ka fetoloa:
- Baud Rate ka kbaud : e ka ba 9.6, 19.2, 38.4, 57.6, 115.2
- Parity: Leha ho le joalo, ha ho letho kapa le makatsang
- Palo ea Stop Bits: 1 kapa 2
Litekanyetso tsa kamehla ke 19.2kbaud, Even Parity, 1 Stop bit Litekanyetso tsa kamehla ke 19.2kbaud, Even Parity, 1 Stop bit.
Ho beha Aterese
Aterese ea Makhoba ea Modbus e ka lokisoa sebakeng sa heno ho sesebelisoa ka "5Er" submenu. Aterese ea lekhoba e ka tloha ho 1 ho isa ho 247. Theko ea kamehla ke 001.
Ela hloko: Aterese 0 e boloketsoe melaetsa ea khaso. A90 e amohela khaso bakeng sa mesebetsi ea ho ngola, leha ho le joalo ha ho karabo e khutlisetsoang ho mong'a eona.
Khutlela ho Defaults
Ho fetola mofuta oa ho kenya lisebelisoa (sebakeng sa heno ka keypad) kapa ho tsosolosa tlhophiso ho ea ho kamehla ho tla ba le phello ea ho khutlisetsa litlhophiso tsa puisano tsa Modbus le aterese ea lekhoba ho boleng ba bona ba kamehla.
Mesebetsi ea Modbus e tšehelitsoeng
Mesebetsi ea Modbus e tšehelitsoeng ke A90 ke e latelang:
| Decimal Hex Tlhaloso | ||
| 01 | 0x01 | Bala Likhoeli |
| 02 | 0x02 | Bala Litlhahiso tse Ikhethileng |
| 03 | 0x03 | Bala Ho Holding Registers |
| 04 | 0x04 | Bala Lingoliloeng Tsa Lintho |
| 05 | 0x05 | Ngola Coil e le 'Ngoe |
| 06 | 0x06 | Ngola Ngoliso e le 'Ngoe |
| 08 | 0x08 | Diagnostics (E tšehelitsoe hanyenyane) |
| 15 | 0x0F | Ngola Likhoeli tse ngata |
| 16 | 0x10 | Ngola Lirekoto tse ngata |
| 43 | 0x2B | Bala Boitsebiso ba Sesebediswa (E tšehelitsoe hanyenyane) |
Mesebetsi e ka tlase ea tlhahlobo e latelang e tšehetsoa ntle le ts'ebetso e nyane ea 0x03 (Sena se hlokoa feela bakeng sa protocol ea ASCII. Kopo mabapi le karoloana ena e hlahisa mokhelo oa ILLEGAL DATA VALUE.)
| Khoutu ea Sub-Function | Tlhaloso | |
| Decimal | Hex | |
| 00 | 0x00 | Khutlisetsa Lintlha tsa Potso |
| 01 | 0x01 | Qala hape Khetho ea Lipuisano |
| 02 | 0x02 | Khutlisetsa Libuka tsa Tlhahlobo |
| 03 | 0x03 | Fetola ASCII Input Delimiter (Ha e tšehetsoe) |
| 04 | 0x04 | Qobella Mokhoa oa ho Mamela Feela |
| 05…09 | 0x05…0x09 | Reserved |
| 10 | 0x0A | Hlakola Libali le Rejisetara ea Tlhahlobo |
| 11 | 0x0B | Khutla Bus Message Count |
| 12 | 0x0C | Palo ea Phoso ea Khokahano ea Libese ea Khutlela |
| 13 | 0x0D | Liphoso Tsa ho Khutlisa Mekhelo ea Libese |
| 14 | 0x0E | Khutlisa Server Message Count |
| 15 | 0x0F | Khutlisa Seva Ha ho Na Likarabo Palo |
| 16 | 0x10 | Khutlisa Server NAK Count |
| 17 | 0x11 | Khutlisa Server Busy Count |
| 18 | 0x12 | Return Bus Character Overrun Count |
| 19 | 0x13 | Reserved |
| 20 | 0x14 | Hlakola Counter ea Overrun le Folakha |
| 21…65535 | 0xnn | Reserved |
Bala Boitsebiso ba Sesebediswa (Khouto ya Tshebetso 0x2B)
Ke mofuta oa MEI feela oa 14 o tšehetsoeng mosebetsing ona, 'me mefuta e meng kaofela e hanoa. Khoutu ena ea ts'ebetso e lumella ho bala boitsebahatso le tlhaiso-leseling e eketsehileng ho sesebelisoa se hole.
Ho na le lihlopha tse 3 tsa lintho tse hlalositsoeng lethathamong le latelang. Tafole e boetse e hlalosa boleng le bolelele ba molaetsa ho tsoa ho sesebelisoa bakeng sa ID ka 'ngoe ea ntho.
| MEI
Mofuta |
Boitsebiso ba ntho | Lebitso la Ntho / Tlhaloso | Mofuta | Sehlopha | Boleng bo Khutlisitsoeng | Boleng ba Boleng |
| 14 | 0x00 | Vend kapa Lebitso | Khoele ea ASCII | Motheo | "BEKA Associates Ltd." | 20 |
| 0x01 | Khoutu ea Sehlahisoa | Khoele ea ASCII | "A90" | 3 | ||
| 0x02 | Phetoho e Meholo e Nyane | Khoele ea ASCII | “A90.1.FX.XX” moo X.XX
ke mofuta oa firmware |
11 | ||
| 0x03 | Morekisi URL | Khoele ea ASCII | Ka mehla | “www.beka.co.uk” | 14 | |
| 0x04 | Lebitso la Sehlahiswa | Khoele ea ASCII | "Moeletsi" | 7 | ||
| 0x05 | Lebitso la Mohlala | Khoele ea ASCII | "A90" | 3 | ||
| 0x06 | Lebitso la Kopo ea Mosebelisi | Khoele ea ASCII | E sa sebelisoeng | |||
| 0x07…0x7F | Reserved | E sa sebelisoeng | ||||
| 0x80…0xFF | Eketsehile | Ha e Tšehetsoe | ||||
Kopo e tsoang ho Monghali bakeng sa mosebetsi ona e tlameha ho kenyelletsa Read Device ID Code e hlalosang hore na kopo ke ea ntho e le 'ngoe kapa molapo oa lintho:
ID 01 : kopa ho fumana boitsebiso ba sesebelisoa sa mantlha (ho fihlella ho phallela)
ID 02: kopa ho fumana boitsebiso bo tloaelehileng ba sesebelisoa (ho fihlella ho phallela)
ID 03: kopo ea ho fumana boitsebiso bo atolositsoeng ba sesebelisoa (phihlello ea phallo) - Ha e Tšehetsoe
ID 04: kopa ho fumana ntho e le 'ngoe ea boitsebahatso (phihlello ea motho ka mong)
- Bakeng sa phihlello e Atolositsoeng (ID 03) ho khutlisetsoa Mokhelo Code 03 (ILLEGAL DATA VALUE)
- Bakeng sa kopo ea ntho e le 'ngoe (ID 04), haeba ID ea ntho e kopiloeng e lumellana le ID ea ntho e sa sebelisoeng kapa e sa tšehetsoeng (aterese>= 0x07), ho khutlisetsoa Khoutu ea Mokhelo 02 (ADDRESS E MOLAONG EA DATA)
- Bakeng sa phihlello ea molapo (ID 02), karabo e tla kenyelletsa feela lintho tse sebelisitsoeng (aterese <0x07) mme ID ea ntho e latelang e tla hlophisoa ho 0x00 (qala hape qalong.
Modbus Register Address Map
Lintlha:
Ho litafole tse ka tlase (IEEE) e bonts'a hore data e emeloa ke 4 byte IEEE floating point format Bakeng sa li-regista tsa li-bits tse 32 (li-integers kapa floats), lentsoe le Bohlokoa ka ho Fetisisa la 16 ke lona le nang le aterese e phahameng ka ho fetisisa ea Modbus.
| Likhoele | Bala / Ngola | ||
| Aterese | Bits | Tlhaloso | Mesebetsi e Tšehetsoeng |
| 1 | 1 | Alamo1 Thusa | 1, 5, 15 |
| 2 | 1 | Alamo2 Thusa | 1, 5, 15 |
| 3 | 1 | 4/20 O/P Nolofatsa | 1, 5, 15 |
| 4 | 1 | Boloka Tlhophiso | 1, 5, 15 |
Lintlha:
Dumella: 0 = Thibela 1= Nolofatsa
Boloka: 0 = Che Phello 1 = Boloka Lintlha tsa Tlhophiso ho Flash (Coil e tla khutlela ho zero hang ha e bolokiloe)
| Boemo ba ho Kena | Bala
Feela |
||
| Aterese | Bits | Tlhaloso | Mesebetsi e Tšehetsoeng |
| 1 | 1 | Alamo1 E matlafalitsoe | 2 |
| 2 | 1 | Alamo2 E matlafalitsoe | 2 |
| 3 | 1 | Kenya Boemo ba Phoso | 2 |
| 4 | 1 | Tlhophiso e sa Bolokeha | 2 |
| 5 | 1 | Khetho ea Alamo e kentsoe | 2 |
| 6 | 1 | 4/20 O/P Khetho e kentsoe | 2 |
| 7 | 1 | Boemo ba Pontšo ea Tare | 2 |
| 8 | 1 | Ngola Phoso | 2 |
| Dialamo: | 0 = Ho felloa ke Matla | 1= E matlafalitsoe |
| Boemo ba Phoso: | 0 = Tloaelehile | 1 = Phoso |
| Tlhophiso: | n: 0 = E bolokiloe | 1 = E fetotsoe, empa e sa bolokeha |
| Likhetho: | 0 = Ha ea kengoa | 1 = E kenngoe |
| Pontšo ea Tare: | 0 = Kakaretso | 1 = Tare |
| Ngola | 0 = Ha ho Phoso | 1 = Phoso * |
- Boleng ba 1 bo bontša hore teko ea ho qetela ea ho ngolla yuniti e hlahisitse phoso ka lebaka la hore e 'ngoe kapa tse ling tsa lirekoto tsa data li ne li le ka ntle ho sebaka se amohelehang. Ho lokela ho hlokomeloa hore boleng leha e le bofe bo nepahetseng ka har'a kopo ena bo ne bo tla be bo ntse bo sebetsanoa, ke hore, pakete eohle ea ho ngola ha e haneloe.
| Lingoliloeng tsa ho Kena | Bala
Feela |
||
| Aterese | Ngoliso | Tlhaloso | Mesebetsi e Tšehetsoeng |
| 1 | 1 | Mofuta oa ho Kena | 4 |
| 2 | 2 | Boleng ba Pontšo (IEEE) | 4 |
| 4 | 2 | Max Hold Value (IEEE) | 4 |
| 6 | 2 | Min Hold Value (IEEE) | 4 |
| 8 | 2 | Boleng ba Pontšo (32 bits Integer) | 4 |
| 10 | 1 | Hlahisa Boleng ba divisor (n/10) | 4 |
| 11 | 2 | Max Hold (32 bits Integer) | 4 |
| 13 | 1 | Max Hold divisor (n/10) | 4 |
| 14 | 2 | Min Hold (32 bits Integer) | 4 |
| 16 | 1 | Min Hold divisor (n/10) | 4 |
Lintlha:
Lenane la Mofuta oa Ketso:
0 = 0.1V
1 = 1V
2 = 10V
3 = 4/20 mA
4 = 0-50 mA
5 = RTD e fapaneng
6 = 2-Wire RTD
7 = 3-Wire RTD
| Aterese | Ngoliso | Tlhaloso | Ea kamehla | Range Exceptions Mesebetsi E tšehelitsoe | ||
| 1 | 2 | Beha Zero (IEEE) | 0.0 | phaphametse | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3, 16 |
| 3 | 2 | Seta Span (IEEE) | 100.0 | phaphametse | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3, 16 |
| 5 | 2 | Bar Low (IEEE) | * | phaphametse | 3, 16 | |
| 7 | 2 | Bar High (IEEE) | * | phaphametse | 3, 16 | |
| 9 | 2 | Alarm1 Setpoint (IEEE) | 0.0 | phaphametse | E sebetsa feela haeba Khetho e kentsoe | 3, 16 |
| 11 | 2 | Alarm1 Hysteresis (IEEE) | 0.0 | phaphametse | 3, 16 | |
| 13 | 2 | Alarm2 Setpoint (IEEE) | 0.0 | phaphametse | 3, 16 | |
| 15 | 2 | Alarm2 Hysteresis (IEEE) | 0.0 | phaphametse | 3, 16 | |
| 17 | 2 | 4/20 O/P Zero (IEEE) | * | phaphametse | 3, 16 | |
| 19 | 2 | 4/20 O/P Span (IEEE) | * | phaphametse | 3, 16 | |
| 21 | 1 | Diyuniti tsa ho Kena | 0 | 0…4 | E sebetsa feela ho Maikutlo a RTD | 3, 6,16 |
| 22 | 1 | Mosebetsi (Motso oa Motso) | 0 | 0…1 | E sebetsa ho Tse Kenyellelitsoeng Hona Joale | 3, 6,16 |
| 23 | 1 | Qeto (ea linomoro tse nyane haholo) | 0 | 0…3 | 3, 6,16 | |
| 24 | 1 | DP (boemo ba Decimal Point pontshong) | * | 0…5 | 3, 6,16 | |
| 25 | 1 | Mofuta oa Bar | 1 | 0…4 | 3, 6,16 | |
| 26 | 1 | Alamo1 Hi/Lo | 0 | 0…1 | E sebetsa ha feela Khetho e kentsoe Ha se litlhaku tsohle tse fumanehang. Sheba Tlhokomeliso. | 3, 6,16 |
| 27 | 1 | Alamo1 ND/NE | 0 | 0…1 | 3, 6,16 | |
| 28 | 1 | Alarm1 Ho lieha (ka metsotsoana) | 0 | 0…3600 | 3, 6,16 | |
| 29 | 1 | Alamo1 Ho khutsa | 0 | 0…3600 | 3, 6,16 | |
| 30 | 1 | Alarm1 Color (Nomoro e Setisitsoeng Pele ea Mmala) | 1 | 1…7 | 3, 6,16 | |
| 31 | 1 | Alamr1 Flash E nolofalletsa | 1 | 0…1 | 3, 6,16 | |
| 32 | 1 | Alarm1 Latch E nolofalletsa | 0 | 0…1 | 3, 6,16 | |
| 33 | 1 | Alamo2 Hi/Lo | 0 | 0…1 | 3, 6,16 | |
| 34 | 1 | Alamo2 ND/NE | 0 | 0…1 | 3, 6,16 | |
| 35 | 1 | Alarm2 Ho lieha (ka metsotsoana) | 0 | 0…3600 | 3, 6,16 | |
| 36 | 1 | Alamo2 Ho khutsa | 0 | 0…3600 | 3, 6,16 | |
| 37 | 1 | Alarm2 Color (Nomoro e Setisitsoeng Pele ea Mmala) | 1 | 1…7 | 3, 6,16 | |
| 38 | 1 | Alarm2 Flash E nolofalletsa | 1 | 0…1 | 3, 6,16 | |
| 39 | 1 | Alarm2 Latch E nolofalletsa | 0 | 0…1 | 3, 6,16 | |
| 40 | 2 | Alarms Access Code | "0000" | ASCII | 3,16 | |
| 42 | 1 | ACSP E nolofalletsa | 0 | 0…1 | 3, 6,16 | |
| 43 | 1 | Tare E nolofalletsa | 0 | 0…1 | 3, 6,16 | |
| 44 | 1 | Tšoara Tseba | 0 | 0…1 | 3, 6,16 | |
| 45 | 1 | Tšoara ka ho hlaka | 0 | 0…1 | 3, 6,16 | |
| 46 | 1 | U – P (Tšebetso ea Konopo ea P) | 0 | 0…1 | 3, 6,16 | |
| 47 | 1 | Seriba Baud | 1 | 0…4 | 3, 6,16 | |
| 48 | 1 | Serial Par | 2 | 0…2 | 3, 6,16 | |
| 49 | 1 | Seriba Stop | 1 | 1…2 | 3, 6,16 | |
| 50 | 1 | Seriba Addr | 1 | 1…247 | 3, 6,16 | |
| 51 | 1 | 4/20 O/P RTD Phoso ea Hona Joale | 0 | 0…3 | E sebetsa feela haeba Khetho e kentsoe | 3, 6,16 |
| 52 | 2 | K'houtu ea tšireletso | "0000" | ASCII | Ha se litlhaku tsohle tse fumanehang. Sheba Tlhokomeliso. | 3,16 |
| 54 | 1 | Menu Color Preset | 4 | 1…7 | 3, 6,16 | |
| 55 | 1 | Mohloli oa likhakanyo | 0 | 0…1 | 3, 6,16 | |
| 201 | 2 | Beha Zero | 0 | signant | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3,16 |
| 203 | 1 | Beha Zero Divisor | 2 | 0…4 | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3, 6,16 |
| 204 | 2 | Beha Span | 10000 | signant | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3,16 |
| 206 | 1 | Beha Span Divisor | 2 | 0…4 | E sebetsa feela ho Moqtage & Litlhahiso tsa Hona Joale | 3, 6,16 |
| 207 | 2 | Bar Low | * | signant | 3,16 | |
| 209 | 1 | Bar Low Division | * | 0…4 | 3, 6,16 | |
| 210 | 2 | Bar High | * | signant | 3,16 | |
| 212 | 1 | Bar High Division | * | 0…4 | 3, 6,16 | |
| 213 | 2 | Alarm1 Setpoint | * | signant | E sebetsa feela haeba Khetho e kentsoe | 3,16 |
| 215 | 1 | Alarm1 Setpoint Divisor | * | 0…4 | 3, 6,16 | |
| 216 | 2 | Alarm1 Hysteresis | * | signant | 3,16 | |
| 218 | 1 | Alarm1 Hysteresis Divisor | * | 0…4 | 3, 6,16 | |
| 219 | 2 | Alarm2 Setpoint | * | signant | 3,16 | |
| 221 | 1 | Alarm2 Setpoint Divisor | * | 0…4 | 3, 6,16 | |
| 222 | 2 | Alarm2 Hysteresis | * | signant | 3,16 | |
| 224 | 1 | Alarm2 Hysteresis Divisor | * | 0…4 | 3, 6,16 | |
| 225 | 2 | 4/20 O/P Zero | * | signant | 3,16 | |
| 227 | 1 | 4/20 O/P Zero Divisor | * | 0…4 | 3, 6,16 | |
| 228 | 8 | 4/20 O/P Span | * | signant | 3,16 | |
| 230 | 1 | 4/20 O/P Span Divisor | * | 0…4 | 3, 6,16 | |
* = Maemo a kamehla a itšetlehile ka mofuta oa ho kenya 10
Lintlha
| Kenyelletso ea Yuniti: (Ke ka Mehato ea Mocheso feela) |
0 = likhato tsa Celsius 2 = likhato tsa Fahrenheit 4 = Khanyetso |
1 = Likhato Kelvin 3 = Litekanyo Rankine |
| Mosebetsi (Motso oa metso) (Feela bakeng sa Likenyo tsa Hona Joale) | 0 = Ha ho Motso oa Motso | 1 = Ho ntšoa ha metso |
| Qeto (ea linomoro tse nyane haholo) | 0 = 1 2 = 5 |
1 = 2 3 = 10 |
| DP (Boemo ba Lintlha tsa Decimal ho Pontšo :) | 0 = 00000 (Ha ho Ntlha ea Decimal) 2 = 000.00 4 = 0.0000 |
1 = 0000.0 3 = 00.000 5 = Auto (e fana ka tharollo e molemohali) |
| Mofuta oa Bar | 0 = TSOANG 4 = Asps (haeba lialamo li kentsoe) |
1 = Ka ho le letšehali 3 = Ho lokile |
| Alarm Hi/Lo | 0 = Alamo ke Alamo e Tlase | 1 = Alamo ke Alamo e Phahameng |
| Alamo ND/NE | 0 = Alamo Hangata ha e na Matla | 1 = Alamo Hangata e Matlafatsoa |
| Alarm Flash Enable | 0 = E thibela Alarm Flashing | 1 = E nolofalletsa Alamo Flashing |
| Alarm Latch E nolofalletsa | 0 = E thibela Alarm Latching | 1 = E nolofalletsa Alarm Latching |
| ACSP E nolofalletsa | 0 = E thibela sekhechana sa Menu ea Alamo | 1 = E nolofalletsa tsela e khaoletsang ea Menu ea Alamo |
| Tare E nolofalletsa | 0 = E thibela mosebetsi oa Tare | 1 = E nolofalletsa Mosebetsi oa Tare |
| Tšoara Tseba | 0 = E holofetseng Ho tšoara mosebetsi | 1 = E nolofalletsa Ts'ebetso ea Ts'ebetso |
| Tšoara ka ho Hlakola | 0 = Ha ho na phello | 1 = E hlakola max/min ya boleng bo tshwerweng. |
| U – P (Tšebetso ea Konopo ea P) Serial Baud (Modbus baud rate) |
0 = % ea Span 0 = 9600 2 = 38400 4 = 115200 |
1 = Kenyelletso ea Analogue 1 = 19200 3 = 57600 |
| Serial Par (Modbus Parity) | 0 = Ha ho letho 2 = Leha ho le joalo |
1 = E sa tloaelehang |
| Likhoutu tsa Mebala e Ikemetseng ea Feme ('mala o mong le o mong o abetsoeng khoutu o ka fetoloa ka letsoho ka har'a menu) |
1 = Bofubelu 2 = Orange 3 = Botala bo Khanyang 4 = Botala |
5 = Boputsoa 6 = Pherese 7 = Bosoeu |
| 4/20 O/P RTD Phoso ea Hona Joale | 0 = Ha ho na Phoso ea Hona Joale 1 = 3.6 mA |
2 = 3.8 mA 3 = 21 mA |
| Mohloli oa likhakanyo | 0 = Feme (SET | 1 = Mosebedisi (CAL) |
| phaphamala = IEEE Floating Point | Boleng bohle ba li-bits tse 32 bo tlameha ho ngoloa le ho baloa joalo ka taelo e le 'ngoe ho fapana le ho aroloa ho seng joalo ho tla hlahisoa mokhelo oa ILLEGAL ADDRESS. | |
| sigint = 32 bits Integer e saenneng le Divisor | Rejistara ea divisor e hlalosa palo ea makhetlo ao boleng bo felletseng bo arotsoeng ka leshome. Li-divisor le boleng ba li-bits tse 32 li tlameha ho ngoloa le ho baloa 'moho ho seng joalo ho tla hlahisoa mokhelo oa ILLEGAL ADDRESS. | |
Bakeng sa li-bits tse 32 (ebang ke lipalo tse felletseng kapa tse phaphametseng), lentsoe le Bohlokoa ka ho Fetisisa la li-bits tse 16 ke lona le nang le aterese e phahameng ka ho fetisisa ea Modbus.
Haeba rejisetara e ngoletsoeng ho eona e sa sebetse khethong e kentsoeng kapa mofuteng o kentsoeng, mongolo o tla lumelloa empa boleng bo ka tlase bo ke ke ba fetoloa mme folakha e hantsoeng e ke keng ea hlophisoa. Likopo tsa ho bala li tla khutlisa boleng ba 0. Boitšoaro bona bo qoba ho hlahisa mekhelo e ka thibelang sehlopha se felletseng ho ngola. ASCII Character e behiloeng bakeng sa likhoutu tsa phihlello e lekanyelitsoe ke litlhaku tse ka bonts'ang palo ea karolo ea 7. Litlhaku tse latelang li ka sebelisoa:
0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F,G,H,I,J,L,N,O,P,R, T,U,V,Y
BEKA Associates
Old Charlton Road
Hitchin
Hertfordshire
SG5 2DA
Mohala: +44 (0)1462 438301
Fax: +44 (0)1462 453971
Web: www.beka.co.uk
Lengolo-tsoibila: support@beka.co.uk
or sales@beka.co.uk
Litokomane / Lisebelisoa
 |
BEKA Advisor A90 Modbus Interface [pdf] Bukana ea Mosebelisi Advisor A90 Modbus Interface, Advisor A90, Modbus Interface, Interface |
