AttoWave - letšoao

Odin C-497
MOEKETSI MOHAPI
THABANE LETŠENYA

Litaba pata
1 LIEKETSENG
2 TŠEBELETSO
3 Mokhoa oa Dim
4 MOSEBETSI OA LETLOTLO
5 Mokhoa oa Menu
6 Mokhoa oa Teko
7 Hlahisa Fektheri bocha
8 Mohopolo
9 Mokhoa oa ho Bula ka Otho
10 TIISETSO MOEKETSI
11 LIEKETSENG TS'OANELO
12 Litokomane / Lisebelisoa
12.1 Litšupiso
13 Related Posts

LIEKETSENG

Re leboha ho reka radar/laser ea ODIN C-497 e ntlafalitsoeng ke Rocky Mountain Radar. ODIN C-497 ke sesebelisoa sa pele le se ikhethileng sa radar le laser detector lefatšeng se sebetsang hantle haholo.
Re thabetse ho ba le uena u le moreki oa bohlokoa 'me re tšepa hore u tla thabela ODIN C-497 ea hau. Bukana ena e fana ka lintlha tsohle tseo u li hlokang ho beha ODIN C-497 ho u sebeletsa.
HLOKOMELA: Kamehla mamela melao eohle ea lehae le ea mmuso ha u sebelisa sesebelisoa sena.
FCC ID: QKK-ODN e na le FCC ID: W75-BTM0
Thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane ba 20 cm lipakeng tsa radiator le 'mele oa hau kapa batho ba haufi.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Ho feta moo, liphetoho leha e le life kapa liphetoho sehlahisoa sena, tse sa amoheloang ka ho hlaka ke Rocky Mountain Radar ka mongolo, li ka senya matla a mosebedisi a ho sebelisa sehlahisoa sena.

Odin C-497AttoWave C 497 Bluetooth Module

TŠEBELETSO

  1. X, K, Ka-Band, Tlhahlobo ea Laser
  2. Pontšo: 256×32 Pixel RED OLED
  3. 4 Konopo : [MENU]-[DIM]-[MUTE]-[CITY]
  4. Mokhoa o lerootho : KHANYA -> DIM -> DIMMER -> LEFIFI
  5. Ho Homotsa -> Koala -> Koala
  6. Mokhoa oa Toropo : TSE KHOLO <-> CITY
  7. Ho Buloa ka Lentsoe / Koala
  8. Puo ea Lentsoe: SESOTHO / SPANISH
  9. Molumo oa Alamo: PHAHAMENG / LOW
  10. X Band On/Off
  11. K Band On/Off
  12. Ka-Band On/Off
  13. Laser On/Off
  14. K Narrow/Wide
  15. Ka Narrow/Wide
  16. Sefe ea K Band Ho Buletsoe/Ho tima
  17. TSF On/Off
  18. Moqtage Meter On/Off
  19. Scrambler On/Off
  20. Boitlhahlobo On/Off
  21. Fektheri Reset Mode
  22. Memori ea Tlhophiso ea Mosebelisi
  23. Mokhoa oa Teko oa Feme

Pontšo
Pontšo ea OLED e RED e nang le 256×32 Pixel

3. Pontšo bakeng sa Litsebiso tsa Laser / Radar
3.1. Laser “ □ □ □ □ LASER、
3.2. Sehlopha sa X
“ □ □ □ □X □ ▶ □ □ □ □
“ □ □ □ □X □ ▶ ▶ □ □ □ 2
“ □ □ □ □X □ ▶▶▶ □ □ 3
“syncition
“ □ □ □ □XB▶ ▶▶▶▶ □5●
3.3. Sehlopha sa K
“ □ □ □ □K □ ▶ □ □ □
“ □ □ □ □K □ ▶ ▶ □ □ □ 2
“ □ □ □ □K □ ▶ ▶▶ □ □ 3)
“ □ □ □ □K □ ▶ ▶▶▶ □ □
“ □ □ □ □K □ ▶ ▶▶▶▶ □5 □➤
3.4. Ka Band
“ □ □ □Ka □ ▶ □ □ □
“ □ □ □Ka □ ▶ ▶ □ □ □ 2 □
“ □ □ □Ka □ ▶▶▶ □ □ □ 3
“ □ □ □Ka □ ▶▶▶▶ □ □
“ □ □ □Ka □ ▶▶▶▶▶ □5 □➤
3.5. RD ( K, Ka-Band ) Maemo a Alamo: 1-5

Mokhoa oa Dim

4.1. KHANYA: Pontšo ea OLED ea khanya.
4.2. DIM: Pontšo ea OLED e fifetse.
4.3. DIMMER: Pontšo ea OLED e ea fifala.
4.4. LEFIFI: OLED Display ea tima, ke letheba le lenyane feela le tlohang letsohong le letšehali ho ea ho le letona ho sa tsotelehe lialamo.

1. Haeba mokhoa oa ho itlhahloba o ntse o le teng, ho itlhahloba ho tla qala ka tatellano ea tse latelang kamora molaetsa oa ho qala «Rocky Mountain Radar»

  1. Teko ea Scrambler (Hafeela mokhoa oa Scrambler o buletsoe)
  2. X Alarm (Boemo ba Matla a Letšoao 1-5)
  3. Alamo ea K (Matla a Letšoao boemong ba 1-5)
  4. Ka Alarm (Signal Strength level 1-5)
  5. Alamo ea Laser
    Litlhophiso tsa basebelisi ho Voice on/off, puo, Alarm Sound Tone, Scrambler ON/Off li tla sebelisoa kamoo li leng ka teng.

1.1. Lialamo tsa Pontšo le Molumo ho Mokhoa oa Boitlhahlobo oa Boithati

  1. “ □SCRAMBLER □ TEST □” ( Pontsho & Modumo wa Tlhahlobo ya Scrambler – ha feela Mokgwa wa Scrambler o Buletswe)
  2. “ □ □ □ □X □ ▶ □ □ □ □
  3. “ □ □ □ K □ ▶ □ □ □ □
  4. “ □ □ □ Ka □ ▶ □ □ □ 1 □ □ ” ~ “ □ □ Ka □ Ka □ ▶ ▶▶▶ □ 5 □ □ □” ( Ka Display & Alarm Sound )
  5. “ □ □ □ □ LASER □ □ □ □ □ ” ( Pontsho ya Laser & Alamo ya Modumo )

2. Kamora 'Self test, ponts'o e tla bonts'a boemo ba litlhophiso tsa mosebelisi ka tatellano ea tse latelang.

  1. Voice On/Off (pontšo feela, Ha ho beep)
  2. Senyesemane/Spanish (pontšo feela, Ha ho beep)
  3. Molumo o Phahameng / Tlase (pontšo feela, Ha ho beep)
  4. X Band On/Off (pontšo feela, Ha ho beep)
  5.  K Band On/Off (pontšo feela, Ha ho beep)
  6. Ka-Band On/Off (pontšo feela, Ha ho beep)
  7. Laser On/Off (pontšo feela, Ha ho beep)
  8. K Narrow/Wide (pontšo feela, Ha ho beep)
  9.  Ka Narrow/Wide (pontšo feela, Ha ho beep)
  10. Sesefa sa K Band se Bulelitsoe/Ho tima (pontšo feela, Ha ho beep)
  11. TSF On/Off (pontšo feela, Ha ho beep)
  12. Moqtage Meter On/Off (pontšo feela, Ha ho beep)
  13. Scrambler On/Off (pontšo feela, Ha ho beep)
  14. Boitlhahlobo bo On/Timme (pontšo feela, Ha ho beep)
  15. Dim Mode (pontšo feela, Ha ho beep)
  16. Mokhoa oa ho khutsisa (pontšo feela, Ha ho beep)

2.1. Pontšo e tla bontša tse latelang ho latela litlhophiso.

  1. Ho Bula/Ho Koale lentsoe: “ □ □ □ VOICE □ON □ □ ）
  2. Senyesemane/Sepanish: “ □ □ □ □ SESOTHO □ □ □ （
  3. Molumo o Holimo/Lefase: “ □ □ □ □ TONE □ HGH □ □ ” / “ □ □ □
  4. X Ho Timisoa/Ho Koala Leqhama: “ □ □ □X □ Leqhoa
  5. K Ho Bula/Koaloa: “ □ □ □K □ Lehlopha □On □ □ □ ” / “
  6. Ka-Band On/Off: “ □ □Ka-Band □On □ □ □ ” /“
  7. Laser On/Off: “ □ □ □ □ Laser、On、
  8. K E Moqotetsane/Bophara: “ □ □ □ □K □ Mokokotjana
  9. Ka Narrow/Bophara: “ □ □ Ka □ Narrow □ □ □ ” / “ □ □ □ □ Ka □ Wide □
  10. Sefe ea K Band e Bulehile/E Tlohile: “ □ □KBILTER
  11. TSF On/Off
  12. Moqtage Meter On/Off : “MoqtageMeter □On □” / “MoqtageMeter □ Off”
  13. Scrambler On/Off: “ □ □SCRAMBLER □ON □
  14. Boitlhahlobo ba ho Itekoa ka Bowena: “ □ □ SELF □TEST □ON □ ” / “●
  15. Mokgwa o Lerootho: “ □ □ □ □ BRIGHT □ □ □ （））））
    “ □ □ □ □ □DIMMER □ □ □ ）
  16. Mokhoa oa semumu:“

: Pontšo ea OLED ea khanya. : Pontšo ea OLED e fokotsehile. : Pontšo ea OLED e ntse e fokotseha. : OLED Display ea tima, ke letheba le lenyane feela le tlohang letsohong le letšehali ho ea ho le letona ho sa tsotelehe lialamo.

MOSEBETSI OA LETLOTLO 

1. [MENU] Konopo
1.1. Tobetsa konopo ea [MENU] ho kenya Mokhoa oa MENU
2. Konopo ea [MUTE]

  1. Tobetsa konopo ea [MUTE] ho fetola Mokhoa oa ho Homotsa (Ho Homotsa -> Khutsa -> Ho Khutsa
    -> Ho homola: “ □ □ □ MUTE □ OFF □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 3beeps (haeba lentswe le tinngwe)
    -> Bulela Bula: “ □ □ □ MUTE □ON □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 1beep (haeba lentswe le tinngwe)
    -> AutoMute: “ □ □ □ □ AUTO MUTE □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 2beeps (haeba lentswe le timme)
  2. [CITY] Konopo
    3.1. Tobetsa ho fetola Boemo ba Toropo ( HIGHWAY <-> CITY )
    -> Mmila o moholo: “ □ □ □ □ HIGHWAY □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le buletswe) kapa ka 2beeps (haeba lentswe le tinngwe)
    -> Toropo: “ □ □ □ □ □ CITY □ □ □ » ka molaetsa wa lentswe (haeba lentswe le buletswe) kapa ka 1beep (haeba lentswe le tinngwe)
  3. Tobetsa o hatelle 3sec. ho fetola Mokhoa oa Scrambler ( Scrambler On <-> Scrambler Off)
    -> Scrambler Bula: “ □ □SCRAMBLER □ON □ □” ka 1beep
    -> Scrambler Off: “ □ □SCRAMBLER □ OFF □” ka 2beeps

[DIM] Konopo
1.1. Tobetsa [DIM] Konopo ho fetola Boemo ba Lefifi ( KHANYA -> DIM -> DIMMER -> LEFIFI)
-> KHANYA: “ □ □ □ □ BRIGHT □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe), kapa ka 4beeps (haeba lentswe le timme)
-> DIM: “ □ □ □ □ □DIM □ □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 1beep (haeba lentswe le timilwe)
-> DIMMER: “ □ □ □ □ DIMMER □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 2beeps (haeba lentswe le timme)
-> LEFIFI: “ □ □ □ □ DARK □ □ □ □ ” ka molaetsa wa lentswe (haeba lentswe le butswe) kapa ka 3beeps (haeba lentswe le timme).
Haeba peakanyo e phethilwe, o tla bona letheba le lenyane le tlohang ho le letshehadi ho ya ho le letona pontshong.

Mokhoa oa Menu

1. Tobetsa o hatelle konopo ea [DIM/MENU] bakeng sa 3sec. ho kenya Mokhoa oa Menu.
Pontšo e tla bonts'a “• □ □ □
2. Menu Lis

Lethathamo la Menyu  Dikgetho 
Ho Bulela/Ho tima Lentsoe le Buletsoe <-> Voice Off
Mokhoa oa Puo ea Lentsoe Senyesemane <-> Sepanish
Molumo oa Alamo Holimo <-> Tlase
X Band On/Off X Band On <-> X Band Off
K Band On/Off K Band On <-> K Band Off
Ka Band On/Off Ka Band On <-> Ka Band Off
Laser On/Off Laser On <-> Laser Off
K Narrow/Wide K Narrow <-> K Ka bophara
Ka Narrow/Wide Ka Narrow <-> Ka Wide
Sefe ea K Band Ho Buletsoe/Ho tima Sesefa sa K Band se Buletswe <-> Setlhola sa K Band se Timilwe
TSF On/Off TSF E Buletsoe <-> TSF E Tlohile
BLE On/Off BLE On <-> BLE Off
Moqtage Meter On/Off Moqtage Meter On <-> Moqtage Meter Off
Scrambler On/Off Scrambler On <-> Scrambler Off
Boitlhahlobo On/Off Ho Itekoa Ka <-> Ho Itekola ho Tlohile
Reset Fektheri Botjha?
MENU Tsoa

3. Ts'ebetso ea konopo ho Mokhoa oa Menu
3.1. [DIM] Konopo: Tsamaisetsa tlase ho menu ka beep e le 'ngoe
3.2. [MENU] Konopo: Tsamaisetsa holimo ho menu ka beep e le 'ngoe
3.3. [MENU] kapa konopo ea [CITY]: Fetola kapa Khetha khetho ho lenane
4. U ka khetha e 'ngoe ea tse latelang ho Tsoa ho Menu mode,

  1. Khetha "Menu Exit" lethathamong la menu.
  2. Tobetsa o hatelle [MENU] bakeng sa 3sec. ha o ntse o le ho Menu Mode
  3. U se ke ua etsa letho ho feta 10sec.

Yuniti e tla benya “ □ □ □ □ □ EXIT □ ​​□ □ □ ” habedi ka 2beeps mme e tswe ho Menu Mode.

Mokhoa oa Teko

1. Mokhoa oa ho ruta
Alamo ea teko e tla qala ka tatellano e latelang.

  1. Tlhahlobo ea Scrambler
  2. Alamo ea K (Matla a Letšoao la 1-5)
  3.  Ka Alarm (Signal Strength 1-5 level)
  4. Alamo ea Laser

Litlhophiso tsa mosebelisi ho mokhoa oa Voice On/Off, mokhoa oa Puo ea Lentsoe, Alarm Sound Tone li tla sebelisoa joalo ka ha li le nakong ea Mokhoa oa Teko.
2. Pontšo le molumo nakong ea Mokhoa oa Teko

  1. “ □SCRAMBLER □ TEST □” ( Pontsho & Modumo wa Tlhahlobo ya Scrambler )
  2. “ □ □ □ K □ ▶ □ □ □ □
  3. “ □ □ □ Ka □ ▶ □ □ □ 1 □ □ ” ~ “ □ □ Ka □ Ka □ ▶ ▶▶▶ □ 5 □ □ □” ( Ka Display & Alarm Sound )
  4. “ □ □ □ □ LASER □ □ □ □ □ ” ( Pontsho ya Laser & Alamo ya Modumo )

3. Pontsho e tla bontsha “ □ □ □ TEST □ END □ □ ” ka 1beep ha alamo ya teko e qetilwe.
4.Tobetsa konopo efe kapa efe ( [DIM/MENU], [MUTE], [CITY], [TEST] ho emisa alamo ea teko nakong ea Teko.

Hlahisa Fektheri bocha

1. Ha "Fektri Reset?" e khethiloe ho menu, li-setting tsohle li tla khutlisetsoa ho fektheri ea kamehla.
Pontšo e tla benya “ □RESET □ COMPLETED” habeli ka li-beep tse 3.
2. Feme ea kamehla

Mokhoa  Dikgetho  Feme ea kamehla 
Mokhoa oa Dim KHANYA -> DIM -> DIMMER -> LEFIFI KHABANE
Mokhoa oa ho khutsisa Ho Homotsa -> Koala -> Koala Khutsa
Mokhoa oa Motse TSE KHOLO <-> MOTSE TSE KHOLO
Ho Bulela/Ho tima Lentsoe le Buletsoe <-> Voice Off Lentsoe On
Mokhoa oa Puo ea Lentsoe Senyesemane <-> Sepanish Senyesemane
Molumo oa Alamo Holimo <-> Tlase Phahameng
X Band On/Off X Band On <-> X Band Off X Band On
K Band On/Off K Band On <-> K Band Off K Band On
Ka Band On/Off Ka Band On <-> Ka Band Off Ka Band On
Laser On/Off Laser On <-> Laser Off Laser e Buletsoe
K Narrow/Wide K Narrow <-> K Ka bophara K Bophara
Ka Narrow/Wide Ka Narrow <-> Ka Wide Ka Wide
Sefe ea K Band Ho Buletsoe/Ho tima Sesefa sa K Band se Buletswe <-> Setlhola sa K Band se Timilwe Sefe ea K Band E Buletsoe
TSF On/Off TSF E Buletsoe <-> TSF E Tlohile TSF E tima
BLE On/Off BLE On <-> BLE Off BLE On
Moqtage Meter On/Off Moqtage Meter On/Off Moqtage Meter On
Scrambler On/Off Scrambler On <-> Scrambler Off Scrambler On
Boitlhahlobo On/Off Ho Itekoa Ka <-> Ho Itekola ho Tlohile Boitlhahlobo On

3. Ka mor'a hore fektheri e tsosolosoe, Unit e tla bontša litlhophiso tsa morao-rao ka tatellano e latelang ebe e khutlela mocheng oa pele oa menu (Voice On/Off).

  1. HIGHWAY (Lentsoe)
  2. Koala (Lentsoe)
  3. Ho Bulela Lentsoe (Lentsoe)
  4. SESOTHO (Lentsoe)
  5. TONE HI( 3 Beep)
  6. X Band On ( 1 Beep)
  7. K Band On ( 1 Beep )
  8. Ka-Band On ( 1 Beep )
  9. Laser On ( 1 Beep )
  10. K Wide ( 1 Beep)
  11. Ka Wide ( 1 Beep )
  12. Sefe ea K Band e Buletsoe ( 1 Beep )
  13. TSF Off ( 2 Beep )
  14. BLE On ( 1 Beep )
  15. Moqtage Meter On ( 1Beep )
  16. Scrambler On ( 1 Beep )
  17. Self Test On ( 1 Beep )

Mohopolo

1. Yuniti e tla boloka li-setting tsa mosebelisi mekhoeng e latelang, e sebetse ka nepo ha yuniti e buloa hape.

Mokhoa  Dikgetho  Feme ea kamehla
Mokhoa oa Dim KHANYA -> DIM -> DIMMER -> LEFIFI KHABANE
Mokhoa oa ho khutsisa Ho Homotsa -> Koala -> Koala Khutsa
Mokhoa oa Motse TSE KHOLO <-> MOTSE TSE KHOLO
Ho Bulela/Ho tima Lentsoe le Buletsoe <-> Voice Off Lentsoe On
Mokhoa oa Puo ea Lentsoe Senyesemane <-> Sepanish Senyesemane
Molumo oa Alamo Holimo <-> Tlase Phahameng
X Band On/Off X Band On <-> X Band Off X Band On
K Band On/Off K Band On <-> K Band Off K Band On
Ka Band On/Off Ka Band On <-> Ka Band Off Ka Band On
Laser On/Off Laser On <-> Laser Off Laser e Buletsoe
K Narrow/Wide K Narrow <-> K Ka bophara K Bophara
Ka Narrow/Wide Ka Narrow <-> Ka Wide Ka Wide
Sefe ea K Band Ho Buletsoe/Ho tima Sesefa sa K Band se Buletswe <-> Setlhola sa K Band se Timilwe Sefe ea K Band E Buletsoe
TSF On/Off TSF E Buletsoe <-> TSF E Tlohile TSF E tima
BLE On/Off BLE On <-> BLE Off BLE On
Moqtage Meter On/Off Moqtage Meter On/Off Moqtage Meter On
Scrambler On/Off Scrambler On <-> Scrambler Off Scrambler On
Boitlhahlobo On/Off Ho Itekoa Ka <-> Ho Itekola ho Tlohile Boitlhahlobo On

Tlhokomeliso ea Bohlokoa
1. Letšoao la Laser
2. K, Ka-Band Letšoao

Mokhoa oa ho Bula ka Otho

1. Voice Off Mode
1.1. Ha alamo e qala, sesebelisoa se tla hlokomela ka 4beeps le molumo o sa bueng bakeng sa 2minutes, hape u falimehe ka 4beeps 'me u lule u khutsitse bakeng sa 2minutes, e tla tsoela pele ka tsela ena ho fihlela metsotso ea 2 ka mor'a hore letšoao le tsamaee.
1.2. Haeba sehlopha se seng se fumanoa nakong ea AutoMute letšoao la pele la sehlopha, yuniti e tla qala tlhokomeliso ka 4beeps 'me e lule e khutsitse ka metsotso ea 2 ebe e tsoela pele ka tsela ena ho fihlela metsotso ea 2 ka mor'a hore letšoao le tsamaee.
Laser / Alamo ea RD

1. Pontšo bakeng sa Alamo ea Laser / Radar

  1. Laser
    “ □ □ □ □ LASER、
  2. X Sehlopha
    “ □ □ □ □X □ ▶ □ □ □ □
    “ □ □ □ □X □ ▶ ▶ □ □ □ 2
    “ □ □ □ □X □ ▶▶▶ □ □ 3
    “syncition
    “ □ □ □ □XB▶ ▶▶▶▶ □5●
  3. Sehlopha sa K
    “ □ □ □ □K □ ▶ □ □ □
    “ □ □ □ □K □ ▶ ▶ □ □ □ 2
    “ □ □ □ □K □ ▶ ▶▶ □ □ 3)
    “ □ □ □ □K □ ▶ ▶▶▶ □ □
    “ □ □ □ □K □ ▶ ▶▶▶▶ □5 □➤
  4. sehlopha sa
    “ □ □ □Ka □ ▶ □ □ □
    “ □ □ □Ka □ ▶ ▶ □ □ □ 2 □
    “ □ □ □Ka □ ▶▶▶ □ □ □ 3
    “ □ □ □Ka □ ▶▶▶▶ □ □
    “ □ □ □Ka □ ▶▶▶▶▶ □5 □➤
  5. RD (X, K, Ka-Band) e na le litekanyetso tsa 5 ho bontša matla a eona a pontšo.

2. Alamo ea Molumo oa Beep
2.1. Molumo oa Beep o na le maemo a 4 bakeng sa K le Ka-Band ho latela matla a eona a lets'oao.
2.2. Bakeng sa alamo ea laser, yuniti e lula e etsa molumo o phahameng ka ho fetisisa (maemo a 4) beep.

Ho sebetsa ka Smartphone ka Bluetooth

ODIN e na le mojule oa Bluetooth ka har'a eona e le hore u ka hokela ODIN ka Bluetooth ho smartphone 'me u e sebelise ka smartphone joalo ka tlhophiso ea menyu le pontšo ea tlhokomeliso, joalo-joalo.

TIISETSO MOEKETSI

Moetsi o fana ka tumello ea ODIN C-497 ea hau khahlano le mefokolo eohle ea thepa le moetso oa nako ea selemo (1) ho tloha ka letsatsi la theko ea mantlha, ho ipapisitsoe le
lipehelo le lipehelo tse latelang: Boikarabello bo le bong ba moetsi tlas'a Tiisetso ena bo lekanyelitsoe ho lokisa kapa, ka khetho ea moetsi, ho nkela ODIN C-497 sebaka. Ha ho na litiisetso tse boletsoeng kapa tse boletsoeng, ho kenyeletsoa le tsa ho itekanela molemong o itseng kapa khoebong, tse fetelang ka nqane ho mona.
Linaha tse ling ha li lumelle meeli ea hore na waranti e boletsoeng e nka nako e kae, ka hona, moeli o ka holimo o kanna oa se sebetse ho uena.

LIEKETSENG TS'OANELO

  • Mofuta oa Radar Receiver: Dual conversion superheterodyne
  • Mofuta oa Antenna: Linear polarized self-container
  • Mofuta oa Sesebelisoa: Khethollo ea khafetsa
  • Khafetsa ea Ts'ebetso
  • 10.525 GHz(X sehlopha)
  • 24.150 GHz(K sehlopha)
  • 33.400 - 36.000GHz(Sehlopha sa Ka super wide)
  • Mofuta oa Moamoheli oa Laser: Moamoheli oa lets'oao la pulsed laser
  • Mocheso oa Ts'ebetso: -20C - +70C
  • Mocheso oa polokelo: -30c - +100C
  • Tlhokahalo ea Matla: 5V, 500mA mobu o mobe

Litokomane / Lisebelisoa

AttoWave C-497 Bluetooth Module [pdf] Buka ea Mong'a
BTM0, W75-BTM0, W75BTM0, C-497 Bluetooth Module, C-497, Bluetooth Module

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *