ATEC ADT282 Dual-Channel Reference Thermometer Readout

Litaelo tsa Tšireletseho

Tlhokomediso
Ho thibela mosebelisi ho tsoa kotsi, ka kopo latela bukana ena ea mosebelisi hore o e sebelise. Ho thibela mollo, ts'okelo ea motlakase kapa likotsi tsa hau, ka kopo etsa tse latelang:

Kakaretso

• Ka kopo bala buka ea mosebelisi pele u sebelisa sehlahisoa;
• Pele o sebelisa sehlahisoa, ka kopo sheba ponahalo ea sehlahisoa ho netefatsa hore ha ho na tšenyo;
• Ka kopo sheba mehato ea ts'ebetso bukeng ea litaelo ha u sebelisa sehlahisoa;
•  Haeba sehlahisoa se senyehile kapa se sa sebetse hantle, ka kopo u se ke ua se sebelisa 'me u ikopanye le Additel;
• Le ka mohla u se ke ua sebelisa sehlahisoa sebakeng se phatlohang, sa mouoane kapa sa lerōle.

Motlakase

Pele o sebelisa sehlahisoa, ka kopo etsa bonnete ba hore phepelo ea motlakase e hokahane ka nepo, mme ts'ebetso e etsoa hantle.
Tlhokomeliso: 
Ho thibela kotsi, ka kopo mamela bukana ea litaelo bakeng sa tšebeliso Ho thibela tšenyo, ka kopo etsa ka tsela e latelang:

• U se ke ua sebelisa sesebelisoa sebakeng se phahameng sa vibrate;
• Haeba sehlahisoa se sa tloaeleha, ka kopo emisa ho se sebelisa 'me u ikopanye le Additel.

Selelekela

Selelekela Kakaretso
ADT282 Reference Thermometer Readout e fana ka lintlha tse nepahetseng ka ho fetesisa le likarolo tse ka letsohong la hau.
letsoho! Ka bokhoni ba ho nepahala ha ho bapisoa le li-thermometers tsa laboratori, ADT282 e khona ho sebetsana le litekanyo tsa hau tsa bohlokoahali. 'Malo ona o nepahetseng haholo o na le liteishene tse peli tsa analoge tse etselitsoeng ho thusa litekanyo tsa papiso le ho fihlela litlhoko tsohle tsa hau tsa ho lekanya mocheso. The touchscreen e bonolo ho e sebelisa e etsa hore ho tsamaea ka har'a menyetla e hlophisitsoeng hantle e boloke nako le boiphihlelo bo monate. Lihokelo tse bohlale tsa setaele sa Lemo li thusa ho netefatsa hore lintlha tsa hau tsa tlhahlobo ea tlhahlobo ha li na potso. ADT282 Reference Thermometer Readout e thusa ho etsa hore metrology e be bonolo 'me e tla fetoha mokhoa oa hau o mocha ha ho hlokahala litekanyo tse tšepahalang tsa mocheso.

Tlhaloso ea Setsebi
Litlhaloso tsa Kakaretso tsa Theknoloji

Pontšo	5.0 inch 480 * 800TFT LCD capacitive skrine
Litekanyo	16.97″ x 4.13″ x 2.04″ (177 mm x 105 mm x 52 mm)
Boima ba 'mele	1.5 liponto (Lik'hilograma tse 0.65)
Phepelo ea motlakase	6600mAh, 23.8Wh lithium betri, nako ea ho tjhaja lihora tse 4 ~ 6, pakete ea betri e ka qosoa   ikemetseng. Bophelo ba betri hangata ke lihora tse 16
Tikoloho	Tlhaloso e netefalitsoeng ea mocheso: (10~30)℃ Mocheso o sebetsang: (-10~50)℃ Mocheso oa polokelo: (-20 ~ 70) ℃ Mongobo: 0 % ~ 95% RH, e sa tsitsang Boholo ba bophahamo: 3000m
Iphuthumatsa Nako	Kamora metsotso e 10 ea ho qala, ho ka finyelloa litlhaloso
Maemakepe Tšireletso Voltage	50Vmax

Setifikeiti sa CE	TUV IEC61326, IEC61010
Ho latela Rohs	Taelo ea Rohs II 2011/65/EU, EN50581:2012
Boemo ba Tšireletso ea IP	IP67, 1 mithara teko ea ho theoha
Puisano	Arola USB-TYPE C (lekhoba), Bluetooth BLE
Litsela tsa Kenyelletso	CH1, CH2 analog channel, 6 pins smart Lemo ports bakeng sa RTD probe; MINI-TC ports bakeng sa TC probe
Tekanyo Pontšo	Kanale e le 'ngoe, kanale e habeli, phapang (mohlala, T1-T2)
Litekanyo tsa Litekanyo	§ CH1, CH2 likanale tsa analoge ka ho fapanyetsana le ho lekanya ka cyclically   § Sekhahla sa tekanyo ea RTD: 1.6S / mocha o le mong, 1.6S / mocha o kopanetsoeng   § Sekhahla sa ho lekanya TC: 0.8S/ mocha o le mong, 0.8S/ mocha o kopanetsoeng
Mekhahlelo ea Tekanyo	°C,°F, K
Lipalo-palo	Max, Min, Avg

Litlhaloso tsa Tekheniki tsa Tekanyo ea Letšoao (Mocheso oa Tikoloho: 20±10℃, ho nepahala ha selemo se le seng)

Mefuta ea lipontšo

Range

Qeto

Ho nepahala

RTD	0 ~ 400Ω	0.1mΩ	±0.5mΩ@（0~20Ω）, ±25ppm@（ 20~400Ω）
TC	-10 ~ 75mV	0.1uV	50ppmRDG+2uV
CJC ea ka hare	NA	NA	± 0.15 ℃ (-10 ℃ ~ 50 ℃ Tlhaloso ea Tiisetso)

Lintlha: 

1. Ha mocheso oa tikoloho e le (-10 ~ + 10) ℃ le (30 ~ 50) ℃, coefficient ea mocheso ke:
   1. Tekanyo ea RTD: ± 2ppmFS/℃.
   2. Tekanyo ea TC: ± 5ppmFS/℃.
2. Phatlalatso ea tekanyo ea RTD: Tekanyo ea lithapo tse 4, Phetoho e sa khaotseng ea hona joale, Khalemelo ea hona joale: 1mA.

RTD Tekanyo

Mefuta ea RTD	Mocheso (℃)		1 Selemo Ho nepahala(℃)
PT10(385)	-200 ~ 850	-200 ~ 200	0.014
		200-600	0.024
		600-850	0.033
PT25(385)	-200 ~ 850	-200 ~ 200	0.012
		200-600	0.024
		600-850	0.033

PT50(385)	-200 ~ 850	-200 ~ 200	0.012
		200-600	0.024
		600-850	0.033
PT100(385) PT100(391) PT100(3916) PT100(3926)	-200 ~ 850	-200 ~ 200	0.012
		200-600	0.024
		600-850	0.033
Cu10(427)	-200 ~ 260	-200 ~ 260	0.013
Cu50(428)	-50 ~ 150	-50 ~ 150	0.010
Cu100(428)	-50 ~ 150	-50 ~ 150	0.010
Ni100(617)   Ni100(618)	-60 ~ 180	-60 ~ 0	0.005
		0-180	0.007
Ni120 (672)	-80 ~ 260	-80 ~ 260	0.007

Lintlha:

1. E lumellana le maemo a mocheso a machaba a ITS90, a khethiloeng ke mamello e kholo ea tekanyo ea RTD, ntle le ho nepahala ha probe;
2. Ka mor'a ho hokahanya probe, ho nepahala ho kopantsoeng ho ka baloa ka ho toba ka mor'a RSS (motso-sum-square) oa ho nepahala ha probe le ho nepahala ha tekanyo ea RTD;
3. Additel e fana ka li-probe tse khutšoane tsa SPRT PT100.

Tekanyo ea TC

Mefuta ea TC	Mocheso Range(℃)		0℃ CJC matšeliso 1 Selemo Ho nepahala(℃)	Matšeliso a ka hare a CJC 1 Selemo Ho nepahala(℃)
S	-50 ~ 1768	-50 ~ 0	0.51	0.53
		0-100	0.37	0.40
		100-1768	0.28	0.32
R	-50 ~ 1768	-50 ~ 0	0.54	0.56
		0-200	0.38	0.41
		200-1768	0.25	0.29
B	0-1820	200-300	1.01	1.02
		300-500	0.66	0.68
		500-800	0.41	0.44

		800-1820	0.28	0.32
K	-270 ~ 1372	-250~-200	0.48	0.50
		-200~-100	0.15	0.21
		-100 ~ 600	0.08	0.17
		600-1372	0.14	0.21
N	-270 ~ 1300	-250~-200	0.76	0.77
		-200~-100	0.22	0.27
		-100 ~ 1300	0.12	0.19
E	-270 ~ 1000	-250~-200	0.26	0.30
		-200~-100	0.10	0.18
		-100 ~ 700	0.06	0.16
		700-1000	0.08	0.17
J	-210 ~ 1200	-210~-100	0.13	0.20
		-100 ~ 700	0.06	0.16
		700-1200	0.10	0.18

T	-270 ~ 400	-250~-100	0.36	0.39
		-100 ~ 0	0.08	0.17
		0-400	0.05	0.16
C	0-2315	0-1000	0.16	0.22
		1000-1800	0.26	0.30
		1800-2315	0.42	0.45
D	0-2315	0-100	0.21	0.26
		100-1200	0.16	0.22
		1200-2000	0.27	0.31
		2000-2315	0.42	0.45
G	0-2315	50-100	0.60	0.62
		100-200	0.38	0.41
		200-400	0.24	0.28
		400-1500	0.16	0.22
		1500-2315	0.32	0.35

L	-200 ~ 900	-200~-100	0.07	0.17
		-100 ~ 400	0.06	0.16
		400-900	0.07	0.17
U	-200 ~ 600	-200 ~ 0	0.14	0.21
		0-600	0.05	0.16
LR	-200 ~ 800	-200 ~ 0	0.09	0.17
		0-800	0.06	0.16
A	0-2500	0-1200	0.20	0.25
		1200-2000	0.33	0.36
		2000-2500	0.48	0.50

Lintlha:

1. E lumellana le maemo a mocheso a machaba a ITS90, a khethiloeng ke mamello e kholo ea tekanyo ea TC mV, ntle le ho nepahala ha probe;
2. Ka mor'a ho hokahanya probe, ho nepahala ho kopantsoeng ho ka baloa ka ho toba ka mor'a RSS (motso-sum-square) oa ho nepahala ha probe le ho nepahala ha tekanyo ea RTD;
3. Additel e fana ka probe e tloaelehileng ea mofuta oa S e nang le sehokelo sa MINI-TC.

Sebopeho sa Motheo

Che.	Karolo Lebitso	Tlhaloso
1	Pontšo	Pontšo e ka theoang le skrine e nang le capacitive
2	Konopo ea matla	Bakeng sa ho tima/ho tima.
3	Kou ea makhoba ea USB	Bakeng sa khokahano ea USB.
4	Boema-kepe ba adaptara	Bakeng sa phepelo ea motlakase.
5	Lemo style port B	Ha e sebelisoe, e boloketsoe ntlafatso ea nako e tlang.
6	Lemo style port A	Ha e sebelisoe, e boloketsoe ntlafatso ea nako e tlang.
7	Li-sockets tse nyane tsa TC	Ho hokela thapo ea mini-TC bakeng sa tekanyo ea TC
8	Li-sockets tsa ho lekanya tsa RTD	Ho hokela RTD probed bakeng sa tekanyo

Phepelo ea motlakase

Smart lithium betri kapa motlakase oa adaptara ea kantle ea matla

• Betri ea lithium e bohlale e ka qosoa ka mokhoa o ikemetseng ka ho sebelisa adaptara ea matla
• Adapter ea matla e potlakela ho ikamahanya le li-plug tsa matla tsa linaha tse fapaneng

Pontšo le mesebetsi

Pontsho e ka Sehloohong
Khokahano e kholo ea ts'ebetso e arotsoe likarolo tse tharo ho tloha holimo ho ea tlase. Karolo e ka holimo ke sebaka sa boemo, karolo e bohareng ke lenane la li-APP, 'me karolo e ka tlaase ke ts'ebetso e kholo ea ts'ebetso. (Setšoantšo sa 2-1)

1. Sebaka sa boemo se kenyelletsa nako le letsatsi, boemo ba betri, boemo ba skrine ea senotlolo, Bluetooth le setsi sa taolo ea melaetsa.
   Tlhokomeliso: Tobetsa bareng ea boemo ho kenya setsi sa taolo ho view le ho laola merero ea mesebetsi e mengata.
2. Lethathamo la li-APP le bonts'a lits'ebetso tsohle tse fanoeng ke sesebelisoa, ho kenyeletsoa ho rekoa ha data, converter unit ea khatello, converter ea mocheso le laebrari ea sensor.
3. Karolo ea Main function navigation e fana ka phihlello ea lits'ebetso tse tharo tse kholo botlaaseng ba skrine: Readout ea Thermometer ea Mecha e Mebeli, Tsamaiso ea Boitsebiso le Tlhophiso ea Tsamaiso.

Senotlolo le ho notlolla Screen

Notlela skrine: Tobetsa sebaka sa boemo ho kenya setsi sa taolo, o ka tobetsa ho notlela skrine sa hajoale ho qoba ts'ebetso e sa lebelloang. Ha skrine se notletsoe, letšoao e tla hlahisoa ka har'a bar ea maemo, 'me lits'ebetso tsohle li ntšoa 'me li thibetsoe skrineng.
Notlolla skrine: Ha skrini se notletsoe, tobetsa konopo ea boemo ho kenya setsi sa taolo ho notlolla skrini.

Bala Thermometer ea Mecha e Mebeli

Dual-Channel Thermometer ke e 'ngoe ea mesebetsi e ka sehloohong ea sesebelisoa (setšoantšo sa 4). E ka lekanya RTD le TC, likanale ka bobeli li ka bontšoa ka nako e le 'ngoe, mocha ka mong o lekanya pontšo ka thoko.
Boleng ba lets'oao le lekantsoeng la kanale bo bonts'oa bohareng ba kanale ka nako ea nnete, 'me tlhaiso-leseling ea mofuta oa lets'oao la hajoale e bonts'oa ka holimo leqeleng. Tobetsa lets'oao ho chencha mofuta oa lets'oao. Tobetsa letšoao la menu hukung e kaholimo ho le letona ho seta kanale ea hajoale ho menu ea pop-up. Tobetsa letšoao la zeroing (ha mocha o e tšehetsa) ho etsa ts'ebetso ea zero ho kanale ea hajoale. Haeba mofuta oa lets'oao le khethiloeng seteisheneng o na le boleng bo bongata bakeng sa ponts'o (bakeng sa mohlalaample, ha u lekanya TC, ho kenyelletsa boleng ba mocheso, ho boetse ho na le boleng ba lets'oao la pele la mV le boleng ba mocheso oa motsoako o batang), ebe mocha o tla bonts'a boleng ba lets'oao la mantlha. Maemo a mang a matšoao a bontšitsoe ka tlase.
Litšoantšo le hukung e kaholimo ho le letona bontša hore na kanale ea hajoale ea tekanyo ea mocheso e butsoe 'me e ea bontšoa, tobetsa litšoantšo tsena ho bula kapa ho koala kanale e tsamaisanang le eona.

Tekanyo ea TC
Ho na le li-sockets tse 2 tsa mini-TC ka holim'a yuniti, tse tsamaellanang le likanale tse peli tse fapaneng. Ka mor'a ho hokahanya TC ho sesebelisoa, tobetsa mofuta oa ho fetola mofuta or ea mocha o lumellanang oa mocheso ebe o khetha TC ho phethahatsa ts'ebetso ea tekanyo ea TC.

Setupo sa Tekanyo ea TC
Tobetsa "Setup" ho menu ea tekanyo ea TC ho kenya setupong sa TC. Lintlha tse latelang li ka hlophisoa ho menu ena.

Khetho ea Menu	Boleng bo sebetsang	Tlhaloso
Mefuta ea TC	li-sensor tsa mV/TC	Khetha li-sensor tsa TC
Mofuta oa mateano a batang	Hare/Kantle/Tlwaelo	Khetha mokhoa oa mateano a batang. Mohatsela o hahelletsoeng ka hare mateano a sesebelisoa e sebelisoa bakeng sa Mokhoa oa ka hare.
Lethathamo la matšeliso a ka ntle a mateano a batang	-80 ~ 300 ℃	Sebetsa ho mokhoa oa mateano a batang a kantle.
Mocheso oa mocheso	K/℉/℃	Khetha yuniti ea mocheso
Qeto	0/0.1/0.01/0.001	Nomoro ea libaka tsa decimal tse hlahisitsoeng

RTD Tekanyo
Ho na le li-sockets tse 2 tsa litekanyo tsa mofuta oa Lemo tsa RTD kaholimo ho yuniti ea ho hokahanya li-RTD. Ka mor'a ho hokahanya RTD ho sesebelisoa, tobetsa mofuta oa ho fetola mofuta or ea mocha o lumellanang oa mocheso 'me u khethe RTD ho phethahatsa mosebetsi oa tekanyo ea RTD.

Tlhophiso ea Tekanyo ea RTD 
Tobetsa "Setup" ho menu ea litekanyo tsa RTD ho kenya setupong sa RTD. Lintlha tse latelang li ka hlophisoa ho menu ena.

Khetho ea Menu	Boleng bo sebetsang	Tlhaloso
Mefuta ea RTD	Ω/RTD mefuta ea sensor	Khetha li-sensor tsa RTD
Mocheso oa mocheso	K / ℉/ ℃	Khetha yuniti ea mocheso
Qeto	0/0.1/0.01/0.001	Nomoro ea libaka tsa decimal tse hlahisitsoeng

Sefe
ADT282 Dual-Channel Thermometer Readout e fana ka mekhoa e 'meli ea ho sefa: mokhoa oa pele oa ho sefa ka mela le ho sefa ka karolelano ho fihlela litlhoko tsa maemo a fapaneng a ts'ebeliso. Tobetsa letšoao la menu ea kanale ea litekanyo ho khetha letšoao la menu ea filthara ka har'a li-pop-up mme sebopeho sa ho seta filthara se tla hlahisoa. (Lethathamo la 9)

Khetho ea Menu	Boleng bo nepahetseng	Tlhaloso
Dumella/thibela	Dumella/thibela	Seta bulela filthara
Mokhoa	Setlhopha sa pele/Sefefo se mahareng	Khetha mokhoa oa ho sefa
Coefficient	0.01-1	E fumaneha feela bakeng sa sefe ea pele
Palo ea sefe samples	1-100	E fumaneha feela bakeng sa sefe e tloaelehileng
Palo ea li-extremum pairs	0-10	E fumaneha feela bakeng sa sefe e tloaelehileng

Zeroing
mV le lipontšo tsa ho hanyetsa li fana ka ts'ebetso e khuts'oane ea zeroing ho felisa ho hoholeha ha zero-point. Sebaka se lumelletsoeng sa zeroing ke 1% FS.

Lipalo-palo
Tobetsa letšoao la menu mocheng oa litekanyo ebe u khetha lenane la lipalo-palo ho menu ea pop-up, boleng bo phahameng ba Max, boleng ba bonyane Min le boleng ba karolelano Avg ea data e tla hlahisoa ka tlaase ho pontšo ea seteishene. Tobetsa letšoao la reset ka holim'a mocha ho tsosolosa lipalo-palo.

Litlhophiso tsa Sistimi

Ka skrineng se seholo sa sesebelisoa, tobetsa konopo ea litlhophiso tsa sistimi ka tlase ho le letona ho kenya sebopeho sa li-setting tsa sistimi. Leqephe lena le na le Bluetooth, taolo ea matla, tšebeletso, ho iketsetsa motho, le ka sehlahisoa.
bluetooth
Calibrator e na le tšebetso ea puisano ea Bluetooth. Tobetsa "Bluetooth" ho menu ea sebopeho sa sistimi ho kenya sebopeho sa tlhophiso ea puisano ea Bluetooth. Khokahano ea tlhophiso ea likhokahano ea Bluetooth e fana ka monyetla le ho tima tšebetso ea puisano ea Bluetooth le mosebetsi oa ho botsa lebitso la sesebelisoa sa Bluetooth le aterese ea sebaka.
Tsamaiso ea Matla

Hlahisa Khanya
Khanya e bonts'ang ea LCD ea calibrator e ka fetoloa ka ho lokisa sebaka sa tsoelo-pele sa khanya.
Lintlha tsa Battery
Khetho ena e bonts'a boemo ba hajoale ba khokahano ea betri le tlhaiso-leseling.
Auto Backlight Off 

• Haeba ho se na ts'ebetso ea likonopo kapa ts'ebetso ea taelo ea puisano ka nako e behiloeng, khanya ea backlight e tla beoa ho ea tlase ka ho fetesisa;
• Nako ea lebone e ka hlophisoa ho: Le ka mohla, metsotsoana e 30, motsotso o le mong, metsotso e 1, metsotso e 5 le metsotso e 15.
• Ka mor'a hore lebone la morao-rao le tingoe, ts'ebetso ea pele ea ts'ebetso e tla tsosolosa khanya e tloaelehileng, joale, ho ama ho latelang ho tla sebetsa ka tloaelo.

Ho robala ka boiketsetso

• Haeba ho se na ts'ebetso ea konopo kapa ts'ebetso ea taelo ea puisano ka nako e behiloeng, lebone le ka morao le tla tima ka ho iketsa 'me le qale mokhoa oa ho robala ka koloi Ka mor'a hore nako e behiloeng e felile, yuniti e tla kena boemong ba ho robala;
• Sebali sa nako ea ho robala se ka hlophisoa ho: Le ka mohla, motsotso o le mong, metsotso e 1, metsotso e 5 le metsotso e 15.
• Ha o sebelisa adaptara ea matla bakeng sa matla, yuniti e ke ke ea robala;
• Ha yuniti e ntse e sebelisa nako ea ho rekota data, e ke ke ea robala.
• Haeba nako ea lebone la morao-rao e setetsoe hore e se ke ea hlola e e-ba teng, joale mokhoa oa ho robala oa othomathike ha o sebetse.

Motlakase o tima

• Haeba ho se na ts'ebetso ea likonopo kapa litaelo tsa puisano tse fumanoeng ka nako e behiloeng, lebone le ka morao le tla tima, 'me nako ea ho tima e tla qala ka mor'a ho qala ha boroko ba koloi. Kamora hore nako eo e felile, yuniti e tla tima ka bo eona.
• Sebali sa ho tima nako ea koloi se ka hlophisoa ho: Le ka mohla, metsotso e 5, metsotso e 15, metsotso e 30, hora e le 1 le lihora tse 2.
• Ha o sebelisa adaptara ea matla bakeng sa phepelo ea motlakase, e ke ke ea tima ka bo eona;
• Ha yuniti e ntse e sebelisa nako ea ho rekota data, e ke ke ea tima ka bo eona.
• Haeba nako ea lebone la morao-rao e setetsoe hore e se ke ea hlola e e-ba teng, joale mokhoa oa ho tima nako o iketsang o fosahetse.

Tshebeletso

Tekanyetso
Tobetsa "menu" ea "calibration" ho sebopeho sa sistimi 'me u kenye phasewete ea calibration "123456" ka lebokoseng la pop-up ho kenya sebopeho sa calibration ea sistimi. Matshwao ohle a ho lekanya ka hara sesebediswa a ka lekanyetswa sebopehong sa tlhophiso ya sistimi. Mokhoa oa calibration o tjena:

1. Khetha ntho e lokelang ho lekanyetsoa lethathamong la lintho.
2. Sebelisa sesebelisoa sa maemo a holimo, ka mor'a ho futhumala ka ho feletseng, latela tataiso ea calibration ka har'a sehokelo ebe o tobetsa konopo ea "Qala" ho qala ho lekanya.
3. Ho ea ka ntlha ea tlhophiso ea litšupiso e fanoeng tsamaisong, khetha boleng bo loketseng bo tloaelehileng 'me u bo kenye.
4. Tobetsa konopo ea "Qetella" ho ngola data ea calibration ka har'a sistimi ho phethela tlhahlobo.
5. Tobetsa konopo ea "Khutlisa" ka tlase letsohong le letšehali la sebopeho sa calibration ho khutlisetsa data ea tlhahlobo ea tšimo ea sesebelisoa.

Tlhokomelo
Ho hlokahala phasewete ho fihlella tšebetso ena. Lekunutu la kamehla la feme ke 123456.

• Lirekoto tsa tlhokomelo: Lintlha tsa tlhokomelo li ka ba viewhlophisitsoe le ho hlophisoa.
• Lirekoto tsa ho lekanya: Lirekoto tsa ho lekanya li ka ba viewed mona.
• Tlhahisoleseding ea ts'ebetso: Khatello ea sepakapaka, boto ea mama le tlhaiso-leseling ea betri.
• Phoso log: Litlaleho tsa liphoso li ka ba viewed mona.

Hlahisa Fektheri bocha
Ho hlokahala phasewete ho nolofalletsa ts'ebetso ena. Lekunutu la kamehla la feme ke 123456.

• Ho khutlisetsa feme ho ke ke ha hlakola lintlha tsa tlhahlobo ea sistimi.

Motho ka mong
Molumo oa tsamaiso
Bophahamo ba "Dual-channel Thermometer Readout" bo ka fetoloa ka ho lokisoa bareng ea tsoelo-pele ea molumo. Ho phaella moo, molumo oa potlako o ka boela oa hlophisoa. (Lethathamo la 10)

Khetho ea Menu	E nepahetse boleng	Tlhaloso
Modumo o thetsweng	E butswe/e tima	Seta molumo oa ho ama
Beep	E butswe/e tima	Etsa beep
Beep e fapaneng haholo	E butswe/e tima	Kenya molumo o phahameng haholo
Snapshot beep	E butswe/e tima	Etsa "snapshot beep".
Beep e tsitsitseng	E butswe/e tima	Beha beep e tsitsitseng

Puo
Sesebelisoa se fana ka lipuo tse ngata tse ka khethoang ka har'a menu ena.
Ka mor'a hore puo e khethoe, sesebelisoa se hloka ho tsosolosoa hore phetoho e sebetse.

Letsatsi & Nako
Lintlha le nako le sebopeho li ka hlophisoa joalo ka tlhoko, sheba Lethathamo la 11.

Khetho ea Menu	E nepahetse boleng	Tlhaloso
Letsatsi	2020-1-1 ～ 2048-12-31	Tlhophiso ea letsatsi
Nako	00:00 ho isa 23:59	Ho beha nako
Sebopeho sa letsatsi	selemo-khoeli-letsatsi / khoeli-letsatsi-selemo / letsatsi-kgwedi-selemo	Tlhophiso ea sebopeho sa letsatsi
Delimiter	-,/,.	Delimiter setting
Sebaka sa nako	UTC±00:00–12:00	Tlhophiso ea sebaka sa nako

24 lihora tse hlophisitsoeng

Thusa

Lumella litlhophiso tsa pontšo ea lihora tse 24

Mabapi le Sehlahisoa
Lintlha tsa sehlahisoa ke tse baloang feela, ho kenyeletsoa lintlha tsa mantlha, lintlha tsa mofuta le lintlha tsa ts'ebetso:

• Lintlha tsa mantlha: ho kenyelletsa mofuta oa sehlahisoa, nomoro ea serial le tlhaiso-leseling ea mofuta oa sistimi.
• Lintlha tsa Mojule: ho kenyeletsoa mofuta oa Bluetooth le boto ea mocheso.

Tsamaiso ea Boitsebiso

Lenaneo la Tsamaiso ea data le arotsoe ebile le laoloa ke li-module tse fapaneng tse sebetsang, 'me data e bolokiloeng ke ts'ebetso e' ngoe le e 'ngoe e laoloa ka har'a foldareng e lumellanang, e bonolo hore basebelisi ba ka e etsa hape.view.

• Mefuta ea data files hore ka pholosoa kenyeletsa: Snapshot le Data Logger.
• Basebelisi ba ka hlakola data files ka lihlopha.

Li-APP

Mofetoleli oa mocheso
Dual-channel Thermometer Readout e fana ka sesebelisoa sa ho fetolela mocheso bakeng sa liindasteri tse fapaneng
RTDs, TCs, le mefuta ea sensor ea tloaelo, e ka fetolelang habonolo lipakeng tsa mocheso le matšoao a motlakase bakeng sa mefuta e fapaneng
lisensara.

Sensor Library
Ho fihlela litlhoko tsa mefuta ea sensor ea mosebelisi, yuniti e fana ka ts'ebetso ea laeborari ea sensor. Basebelisi ba ka hlalosa mefuta e mecha ea li-sensor ho latela litlhoko tsa bona le ho beha li-parameter ho li-sensor. Laebrari ea kutlo e tšehetsa mefuta e mene ea li-sensor tse tloaelehileng: ITS-90, CVD, Custom RTD le Standard TC.

Data Logger
Thermometer Readout e fana ka ts'ebetso ea ho rekota data. Basebelisi ba ka beha liteishene tsa liteishene bakeng sa ho rekota data. Ka mor'a ho hlophisa sampling, tobetsa letšoao la ho qala hape ho qala ho rekota data. Litlhophiso li bontšitsoe ho Lethathamo la 12.

Sehlooho	Boleng bo nepahetseng	Tlhaloso
Nako ea ho rema lifate	0.5-100	Nako ea nako ea ho rekota data
Libaka tsa ho rema lifate	2-100000	Nomoro ea data e kentsoeng
Nako ea ho rema lifate	1-10000000	Nako ea ho Rema Lihlahla

Setsi sa Mocheso
Basebelisi ba ka bala mocheso ka likarolo tse 3 tse fapaneng tsa mocheso, ℃, K le °F.

Phapang ea mocheso
Readout e fana ka ts'ebetso ea phapang ea Mocheso. Basebelisi ba ka bala phapang ea mocheso lipakeng tsa liteishene tse 2 tse nang le ts'ebetso ena.

Sehlopha sa Additel
2900 Saturn Street #B
Brea, CA 92821 USA
Mohala: 714-998-6899
Lengolo-tsoibila: service@aditel.com
websebaka: www.additel.com

Litokomane / Lisebelisoa

ATEC ADT282 Dual-Channel Reference Thermometer Readout [pdf] Bukana ea Mosebelisi ADT282 Dual-Channel Reference Thermometer Readout, ADT282, Dual-Channel Reference Thermometer Readout, Reference Thermometer Readout, Thermometer Readout, Readout

Litšupiso

• Bukana ea Mosebelisi