Timex The Waterbury Quartz Movement Watch TW2R43400 User Manual

1. Selelekela

Thank you for choosing the Timex The Waterbury Quartz Movement Watch TW2R43400. This manual provides detailed instructions for setting up, operating, and maintaining your new timepiece. Please read this manual carefully to ensure proper use and to enjoy all the features of your watch.

Setšoantšo sa 1: Pele view of the Timex The Waterbury Quartz Movement Watch TW2R43400, showcasing its cream dial, stainless steel case, and bracelet.

2. Sehlahisoa Overview

The Timex The Waterbury TW2R43400 is a sophisticated men's watch featuring a 41 mm silver-tone stainless steel case with a fixed top ring and a cream dial protected by a mineral crystal. It is equipped with black luminous hands, Arabic numeral and index hour markers, and minute markers. Key features include world time with 24 cities, a second time zone display, season setting, Indiglo Night-Light with Night-Mode, and QuickDate functionality. The watch operates on a reliable quartz movement and is water-resistant up to 100 meters.

Setšoantšo sa 2: Lehlakore view of the watch, highlighting the crown and pushers used for setting time and functions.

Figure 3: Close-up of the stainless steel deployment clasp with the Timex logo, ensuring a secure fit.

3. Seta

Before initial use, ensure the watch is properly set.

1. Ho phutha: Carefully remove the watch from its packaging. Inspect for any visible damage.
2. Boemo ba Moqhaka: The watch crown may be in a pulled-out position to conserve battery during shipping. Gently push the crown fully in towards the watch case to start the movement.
3. Ho Beha Nako ea Pele: Refer to the 'Operating Instructions' section for detailed steps on setting the time and date.
4. Phetoho ea Bracelet: If the stainless steel bracelet requires adjustment for size, it is recommended to visit a qualified jeweler or watch repair professional.

Figure 4: The watch packaging, including the box and guarantee information.

4. Litaelo tsa Ts'ebetso

4.1 Ho beha Nako le Letsatsi

1. Ho Beha Nako:
   • Pull the crown out to the furthest position (position 3).
   • Rotate the crown clockwise or counter-clockwise to move the hands to the correct time.
   • Sutumelletsa moqhaka morao boemong ba 1 ho qala oache.
2. Setting the Date (QuickDate Feature):
   • Pull the crown out to the middle position (position 2).
   • Fetola moqhaka ho fetola letsatsi.
   • Once the correct date is displayed, push the crown back in to position 1.

   Note: Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.

4.2 World Time and Second Time Zone

Your watch features world time with 24 cities and a second time zone display. Consult the specific instructions provided with your watch for detailed operation of these advanced features, typically involving the pushers on the side of the case and specific crown positions to cycle through cities and set the second time zone.

4.3 Indiglo Night-Light with Night-Mode

The Indiglo Night-Light illuminates the entire dial for easy reading in low light conditions.

• To activate Indiglo: Press and hold the crown (or the designated pusher, if applicable) briefly. The dial will illuminate.
• Night-Mode: For continuous illumination for a few seconds, activate Night-Mode. This is typically done by pressing and holding the crown for a longer duration until the light stays on, or by a specific pusher combination. Refer to your watch's specific instructions for exact activation.

5. Tlhokomelo

5.1 Ho hloekisa

• Wipe the watch case and bracelet with a soft, dry cloth regularly to remove dust and dirt.
• Bakeng sa tšepe e sa hloekang, d hanyenyaneamp Lesela le ka sebelisoa, le lateloe ke lesela le omileng. Qoba lik'hemik'hale tse bohale kapa thepa e khorofo.

5.2 Ho hanyetsa Metsi

Your watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for swimming, snorkeling, and showering. However, it is not suitable for diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the crown or pushers while the watch is wet or submerged.

5.3 Phetoho ea Betri

The watch is powered by a quartz movement, which requires a battery. When the watch stops running, the battery needs to be replaced. It is recommended to have the battery replaced by an authorized Timex service center or a professional watchmaker to ensure proper sealing and maintain water resistance.

6. Ho rarolla mathata

• Sheba ha e Mathe: Ensure the crown is fully pushed in. If it still does not run, the battery may need replacement.
• Letsatsi le sa Fetoheng: Check if the time is set correctly (AM/PM). If the date changes at noon, the watch is set for PM instead of AM. Advance the time by 12 hours.
• Condensation Inside Crystal: This may indicate a loss of water resistance. Avoid further exposure to water and have the watch inspected by a professional immediately.

For issues not covered here, please contact Timex customer support or an authorized service center.

7. Litlhaloso

8. Tiisetso le Tšehetso

Your Timex watch is covered by a limited warranty against manufacturing defects. Please refer to the guarantee card included with your watch for specific terms and conditions, including the warranty period and coverage details. For customer support, service, or to locate an authorized service center, please visit the official Timex websebaka kapa ikopanye le lefapha la litšebeletso tsa bareki.

Lisebelisoa tsa Marang-rang: Bakeng sa lintlha tse ling le tšehetso, etela www.licxengra.com.