Buka ea Mosebelisi ea Rollei Actioncam 415

1. Selelekela

The Rollei Actioncam 415 is a high-quality WiFi action camera designed for capturing spectacular videos and photos. It features Full HD video resolution, a 5 MP photo resolution, and a 140° super wide-angle lens for sharp, natural colors. This manual provides essential information for the proper use and maintenance of your device.

Sehlahisoa se Felletseview

The Rollei Actioncam 415 is equipped with features for various action scenarios, including an underwater protective housing for depths up to 40 meters and a splash-proof rear door for sound recording during activities like mountain biking.

Setšoantšo sa 1.1: Pele view of the Rollei Actioncam 415 enclosed in its waterproof housing, mounted on a basic adapter.

Likarolo tsa Bohlokoa

• WiFi Action Camera with Full HD 1080p/30 fps resolution.
• 140° Super Wide-Angle Lens.
• Integrated WiFi with a range of up to 20 meters.
• Includes underwater protective housing for dives up to 40 meters deep.
• Equipped with a 900 mAh lithium-ion battery, providing up to 90 minutes of battery life (without WiFi).
• Secure Release System (SRS) for safety during mounting.

2. Seta

2.1 Unboxing le likarolo

Before starting, ensure all components are present. The package typically includes:

• Rollei Actioncam 415
• Underwater protective housing with 2 replaceable rear doors (1x for diving, 1x splash protection)
• Betri ea lithium-ion e ka nchafatsoang
• Camera mount and adapter
• Basic mount with 2-component button
• Flat Safety Pad with 3M adhesive
• Curved Safety Pad with 3M adhesive
• Quick camera mount
• Adapter ea tripod
• Mohala oa USB
• Bukana ea mosebelisi

Setšoantšo sa 2.1: Ho fetaview of the Rollei Actioncam 415 and its included accessories.

2.2 Ho Kenya le ho tjhaja Betri

1. Open the battery compartment cover on the camera.
2. Insert the lithium-ion battery, ensuring correct polarity.
3. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.
4. To charge, connect the camera to a USB power source using the provided USB cable. The charging indicator will illuminate.

2.3 Ho Kena Karete ea Memori

The Actioncam 415 supports Micro SD cards. A Class 10 or higher card is recommended for optimal performance.

1. Locate the Micro SD card slot on the side of the camera (without the housing).
2. Gently insert the Micro SD card with the contacts facing the correct direction until it clicks into place.
3. To remove, press the card gently inward, and it will spring out.

Setšoantšo sa 2.2: Ka morao view of the camera without its housing, highlighting the screen and the Micro SD card slot.

2.4 Waterproof Housing and Mounting

The camera comes with a waterproof housing for underwater use and various mounting options.

• Matlo a sa Keneng Metsi: For underwater activities up to 40 meters, use the sealed rear door. For activities where sound recording is important but splash protection is needed (e.g., cycling), use the splash-proof rear door. Ensure the housing is properly sealed before use.
• Ho hlongoa: Use the provided Safety Pads with 3M adhesive for flat or curved surfaces. Attach the camera to the desired mount using the quick camera mount or tripod adapter. The Secure Release System (SRS) is designed to release the camera from its mount in case of impact, preventing potential injury.

Setšoantšo sa 2.3: Lehlakore view of the camera within its waterproof housing, illustrating the side buttons and port access.

3. Litaelo tsa Ts'ebetso

3.1 Ho Bulela/Ho tima

• Matlafatsa: Tobetsa o be o tshware konopo ya Power/Mode (hangata e ka pele kapa hodimo) metsotswana e mmalwa ho fihlela skrine e bonesa.
• Tlosa motlakase: Press and hold the Power/Mode button again for a few seconds until the camera shuts down.

Setšoantšo sa 3.1: Pele view of the camera without its housing, indicating the Power/Mode button.

3.2 Khetho ea Mokhoa

Press the Power/Mode button repeatedly to cycle through different modes such as Video, Photo, Playback, and Settings.

3.3 Ho rekota video

1. Fetolela ho Mokhoa oa Video.
2. Press the Shutter/OK button (usually on top) to start recording. A red indicator light will typically flash, and a timer will appear on the screen.
3. Press the Shutter/OK button again to stop recording.

3.4 Ho nka linepe

1. Fetolela ho Foto mode.
2. Foreime setšoantšo sa hau u sebelisa ponts'o ea lisenthimithara tse 2.
3. Press the Shutter/OK button to take a photo.

Figure 3.2: The 2-inch display on the back of the camera, showing a captured image or live view.

3.5 Khokahano ea Wi-Fi le Taolo ea Lisebelisoa

The integrated Wi-Fi allows remote control of your Actioncam 415 via a smartphone or tablet. The intuitive app is available for free on the Apple App Store and Google Play Store.

1. Enable Wi-Fi on your Actioncam 415 through the settings menu.
2. On your smartphone or tablet, connect to the camera's Wi-Fi network.
3. Open the Rollei Actioncam app to control recording, view phela footage, and adjust settings.

3.6 Time-Lapse Function

The camera supports time-lapse photography. Refer to the on-screen menu for specific settings to configure interval and duration.

4. Tlhokomelo

4.1 Ho hloekisa

• 'Mele oa Khamera: Use a soft, dry cloth to wipe the camera body. Avoid abrasive cleaners.
• Lense: Use a lens cleaning cloth and specialized lens cleaning solution. Do not touch the lens with your fingers.
• Matlo a sa Keneng Metsi: After use in saltwater, rinse the housing with fresh water and allow it to air dry. Ensure no sand or debris is trapped in the seals.

Tlhokomelo ea Battery

• Tjhaja betri ka botlalo pele o e sebedisa.
• Avoid completely draining the battery regularly to prolong its lifespan.
• Store the camera and battery in a cool, dry place when not in use.

4.3 Polokelo

When storing the camera for extended periods, remove the battery and keep the camera in a protective case to prevent dust and damage.

5. Ho rarolla mathata

• Khamera ha e sebetse: Ensure the battery is charged and correctly inserted.
• Ho rekota ho emisa ho sa lebelloa: Check if the Micro SD card has sufficient space or if the battery is low. Ensure the card is Class 10 or higher.
• Mathata a khokahano ea Wi-Fi: Ensure Wi-Fi is enabled on the camera and your mobile device. Try restarting both devices.
• Boleng bo bobe ba setšoantšo/video: Check the lens for smudges or dirt. Ensure settings are appropriate for lighting conditions.

6. Litlhaloso

7. Tiisetso le Tšehetso

For warranty information, technical support, or further assistance, please refer to the official Rollei websebaka kapa ikopanye le lefapha la litšebeletso tsa bareki. Boloka bopaki ba hau ba theko bakeng sa likopo tsa waranti.

Official Rollei Websebaka: www.rollei.de