Philips Diamond Vision H11 Halogen Headlight Bulbs - Instruction Manual

1. Selelekela

Thank you for choosing Philips Diamond Vision H11 Halogen Headlight Bulbs. These bulbs are designed to provide a distinctively white light with a color temperature of 5000K, enhancing the aesthetic of your vehicle's lighting. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new headlight bulbs.

Figure 1: Philips Diamond Vision H11 Halogen Headlight Bulb (Pair)

2. Ho seta le ho kenya

Proper installation is crucial for optimal performance and safety. Always ensure your vehicle is turned off and cooled down before beginning installation. It is recommended to replace both headlight bulbs simultaneously to ensure consistent light output and lifespan.

2.1. Pele O Qala

• Netefatsa Mofuta oa Bulb: Confirm that your vehicle uses H11 bulb type. Refer to your vehicle's owner's manual for correct bulb specifications.
• Polokeho Pele: Wear protective gloves to avoid touching the glass part of the bulb. Oils from your skin can create hot spots, reducing bulb lifespan.
• Lisebelisoa: No special tools are typically required, but a flathead screwdriver or trim removal tool may be helpful for accessing the headlight assembly.

2.2. Mehato ea ho Kenya

1. Kena ho Kopano ea Mabone a Hloahloa: Open your vehicle's hood. Locate the back of the headlight assembly. Depending on your vehicle model, you may need to remove a cover or move other components to gain access.
2. Hakolla Wiring: Carefully disconnect the electrical connector from the back of the old bulb. This usually involves pressing a tab and pulling.
3. Tlosa Bulb ea Khale: Twist the old H11 bulb counter-clockwise to unlock it from the housing, then gently pull it straight out.
4. Kenya Bulb e Ncha: Holding the new Philips Diamond Vision H11 bulb by its base (avoiding the glass), align the tabs on the bulb with the slots in the headlight housing. Insert the bulb and twist clockwise until it locks securely into place.
5. Kopanya Wiring hape: Reattach the electrical connector to the new bulb until you hear or feel a click, ensuring a secure connection.
6. Mosebetsi oa Teko: Turn on your vehicle's headlights to ensure both new bulbs are functioning correctly before closing the hood.

3. Litaelo tsa Ts'ebetso

Philips Diamond Vision H11 bulbs provide a super white light with a color temperature of 5000K. While designed to offer a distinct look, please note that these bulbs are not as bright as standard OEM bulbs and are not HID bulbs. Their primary benefit is the unique white light appearance.

• Always use your headlights in accordance with local traffic laws and conditions.
• Ensure your headlight aim is correctly adjusted after installation to prevent blinding oncoming drivers and to maximize your visibility.

4. Tlhokomelo

To ensure the longevity and optimal performance of your Philips Diamond Vision H11 bulbs, follow these maintenance tips:

• Ho Hloekisa Kamehla: Keep your headlight lenses clean from dirt, debris, and oxidation. Use a soft cloth and appropriate automotive cleaning solutions.
• Tlhahlobo ea Pono: Periodically check your bulbs for any signs of dimming or discoloration. Replace bulbs in pairs for consistent performance.
• Qoba ho Thetsa Khalase: When handling bulbs, always use gloves or a clean cloth to avoid transferring oils to the glass, which can shorten bulb life.

5. Ho rarolla mathata

If you encounter issues with your Philips Diamond Vision H11 bulbs, consider the following:

• Bulb e sa Khantšeng:
  • Check the electrical connection to ensure it is secure.
  • Verify the bulb is correctly seated and locked into the headlight housing.
  • Inspect your vehicle's fuse box for a blown headlight fuse.
• Dimmer than Expected: These bulbs are designed for a 5000K super white appearance and are noted to be dimmer than standard OEM bulbs. This is a characteristic of the product.
• Phapang ea Mebala: The color temperature is 5000K, which is a super white light. Some users may perceive a slight blue tint depending on the headlight assembly and individual perception.
• Nako e Khutšoane ea Bophelo: Ensure the glass part of the bulb was not touched during installation. Oils from skin can significantly reduce bulb life.

6. Litlhaloso

7. Tiisetso le Tšehetso

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Philips Automotive Lighting website. Always retain your proof of purchase for any warranty claims.