MOHLALEFI C2
MAX MAX
MANTI LEHLANYA
MOEKETSI MOSEBETSI
Kea leboha ka ho khetha lihlahisoa tsa Armytek. Ka kopo bala bukana ena ka hloko pele u sebelisa toche.
Litlhaloso
Letsatsi le Letsatsi Jara leseli: moralo o kopaneng, konopo ea lehlakore e loketseng, pheletso e khethehileng ea matt e khahlanong le abrasive ntle le kn e thataurling, makenete e hahelletsoeng ka hare ho mohatla, le sekotwana se robust removable steel
Lebone la baesekele: 'mele o entsoeng ka aluminium ea boemo ba sefofane e tšoarellang le e bobebe, e ntlafetseng ea ho hanyetsa ho tsitsipana, liliba tse ncha bakeng sa ts'ireletso e ntle ea betri le mokhanni. Leseli le sa khaotseng le sa benyang, le ho toloha kapele sete
- Lisebelisoa tsa elektronike tsa moloko o mocha li fana ka khanya e tsotehang ea 4000 lumens. Khanya e sa khaotseng esita le lithempereitjhara tse tlase mme betri e sa tjhajilwe ka botlalo
- Multicolor mocheso, boemo ba betri, le sesupo sa boemo bo nang le bokhoni ba ho e tima
-
Boriti bo bonolo bo pharaletseng ba sistimi ea optical e ntlafalitsoeng ka botlalo, lense ea TIR e sirelelitsoe mekhoeng ka khalase e futhumetseng e nang le anti-reflective coat.
-
Theknoloji e ncha e lumella ho sebelisa libeteri leha e le life tsa 21700 kapa 18650 Li-Ion tse nang le 15A discharge ea hona joale 'me e fana ka tšireletso e feletseng khahlanong le li-circuits tse khutšoanyane esita le haeba ho kopana pakeng tsa lihokelo tsa makenete le lintho tsa tšepe.
-
Taolo e sebetsang ea mocheso oa nako ea 'nete ho thibela mocheso o fetang +58 °C
-
Tšireletso e felletseng metsing, litšila le lerōleng ho latela maemo a IP68 - toche e tsoela pele ho sebetsa le botebong ba limithara tse 10. E mamella ho oela ho fihla ho limithara tse 10
-
Sehokelo sa makenete se matla le se sa keneleng metsi
| Mohlala | Wizard C2 Pro Max (E tšoeu) | |
| LED/Optics | Cree XHP70.2/TIR | |
| Mofuta oa botsitso bo khanyang | E FULL (leseli la kamehla) | |
| Tlhahiso e khanyang | 4000 lm | |
| Tlhōrō ea beam e matla | 3300 cd | |
| Hotspot: Qhala | 110°:150° | |
| Bohole ba Beam | 114 m | |
| Mekhoa, tlhahiso ea leseli, le nako ea ho sebetsa (e lekantsoeng ka 21700 Li-Ion 5000 mAh betri ho fihlela tlhahiso e khanyang e theohela ho 10% ea boleng ba pele) | Turbo2 | 4000 lm/3 h 15 min (900 lm kamora metsotsoana e 50) |
| Turbo1 | 1300 lm/3 h 20 min (900 lm ka mor'a 12 min) | |
| Ka sehloohong3 | 450 lm/7 h | |
| Ka sehloohong2 | 150 lm/21 h | |
| Ka sehloohong1 | 45 lm/64 h | |
| Sekakana2 | 4.6 lm / libeke tse 2 | |
| Sekakana1 | 0.35 lm/2 likhoeli | |
| Strobe3 | 4000 lm/10 Hz/6 h 50 min (900 lm ka mor'a metsotso e 2) | |
| Strobe2 | 4000 lm/1 Hz/14 h (900 lm ka mor'a metsotso e 10) | |
| Strobe1 | 150 lm/1 Hz/90 h | |
| Mohloli oa matla | 1×21700 Li-Ion, 1×18650 Li-Ion | |
| Bolelele/Bolelele ba mmele/Bophara ba hlooho | 121.5 limilimithara / 23.6 limilimithara / 34.4 limilimithara | |
| Boima ntle le/ka betri | 79 g/149 g | |
| Ho qoelisoa ha metsi le ho hanyetsa ka matla | IP68, 10 m bakeng sa 2 h. Bophahamo ho fihla ho 10 m | |
X Khanya e hlahisoang bakeng sa mabone a nang le Leseli le futhumetseng e ka tlase ho 7%, sebaka sa marang-rang se ka tlase ho 3%. Litlhaloso tsohle tse ka holimo ke liphetho tsa liteko tse thehiloeng ho ANSI/NEMA FL1-2009 Standard. Liteko li etsoa ho sebelisoa betri e kenyellelitsoeng sete. Lintlha li ka fapana ka lebaka la tikoloho, ho felloa ke mocheso, le lintlha tse ling.
Beha tlhaloso
Lebone, 21700 Li-Ion 5000 mAh betri, 18650 adaptara ea betri, tjhaja ea makenete ea USB, sekotwana, palo ea lihlooho, thaba ea libaesekele ABM-01, li-sparering tse 2, buka ea mosebelisi.
Mohlahisi o na le tokelo ea ho fetola sephutheloana ka boikhethelo ba hae ntle le ho fetola bukana ena. Litlhaloso li ka fetoha ntle le tsebiso.
Tšebeletso ea Pele
- Tlosa sekoahelo sa mohatla.
- Beha betri sebakeng se nepahetseng (+) se shebileng hloohong ea toche.
- Lokisa sekoahelo sa mohatla 'me u se tiise ho fihlela moo se ka khonang. Toche e se e loketse ho sebetsa.
MOKHOA OA HO HOKETSA MOKHOA OA MAGNETIC
Tlosa sekoahelo sa mohatla bakeng sa 1/4 ea selikalikoe 'me u lokise tjhaja ea makenete ho kepisi ea mohatla.
TŠEBELETSO MALA MOLA
Charger ha e ea kengoa:
- Botala - sesebelisoa se boemong ba ho leta.
Chaja e kentsoe: - Ho panya ha botala - tlhahlobo ea matla a betritage.
- Ho panya ha khubelu - lokolla sekoahelo sa mohatla bakeng sa 1/4 bakeng sa ho tjhaja.
- Ho panya ha Orange - Mohloli oa matla oa USB voltage e tlase haholo bakeng sa tswelopele e nepahetseng ya ho tjhaja kapa kgokahanyo e mpe pakeng tsa tjhaja le betri. Hloekisa mohatla le likhoele tsa likarolo tsa toche, sebelisa mohloli o fapaneng oa matla.
- Bokhubelu - ho tjhaja ka sekhahla sa ho tjhaja hona joale ho ntse ho tsoela pele.
- Orange - Mohloli oa matla oa USB voltage tlase haholo, motlakase oa ho tjhaja o ka fokotseha.
- Green - ho tjhaja ho felile.
Tshebetso
Pele o sebelisoa: Tiisa sekoahelo sa mohatla moo se ka fihlang teng.
KAKARETSO MOFUTA
Mekhoa: Firefly1, Firefly2, Mekhoa e meholo, mokhoa oa Turbo (e sebelisitsoeng ho qetela, Turbo2 ka ho sa feleng).
Boemong ba OFF
- tobetsa: Ho bulela mokhoa o sebelisitsoeng ho qetela. Tobetsa o hatelle: Ho qala ho palama baesekele ka mekhoa ea Firefly. Lokolla ho khetha. Ho boloka konopo ho tla qala ho palama baesekele ka mekhoa e Meholo.
Boemong ba ON
- tobetsa: Ho tima toche. Tobetsa o hatelle: Ho qala ho palama baesekele ka mekhoa e meholo ho tsoa mokhoeng ofe kapa ofe. Ho Firefly1 ho palama baesekele ka mekhoa e meholo ho qala kamora ho palama baesekele ka mekhoa ea Firefly. Lokolla ho khetha.
- ho tobetsa: Ho bulela mokhoa oa Turbo ho tsoa maemong afe kapa afe. Ho penya habeli habeli ho khutlisa mokhoa oa ho qetela o sebelisitsoeng.
TS'ELISO MOFUTA
Ho fapoha lipakeng tsa mefuta ea ts'ebetso, lokolla sekoahelo sa mohatla ho 1/4 ha toche e timme, tobetsa konopo 'me u tiise sekoahelo sa mohatla ha u ntse u tobetse konopo.
Likarolo tsa mekhoa:
[1] - Mefuta ea Firefly, [2] - Mefuta e meholo, [3] - Mefuta ea Turbo, [4] - Mekhoa ea Strobe
Boemong ba OFF:
Tobetsa 1: Ho bulela mokhoa oa ho qetela o sebelisitsoeng. Tobetsa o hatelle: Ho bulela Firefly1 mode [Karolo ea 1]. Ho boloka konopo ho tla qala ho palama baesekele ka mekhoa: Firefly1 - Firefly2 - Main1 - Main2 - Main3 - Turbo1.
E boemong ba ON:
- tobetsa: Ho tima toche. Tobetsa o hatelle: Ho qala ho palama baesekele ka mekhoa ea Karolo e amehang.
E tšoanang ho OFF & ON e re: - clicks: Ho bulela Main mode [Karolo ea 2]. Ho penya habeli ho tla fetoha lipakeng tsa mekhoa e khethiloeng ho [Karolo ea 1] le [Karolo ea 2].
- clicks: Ho bulela mokhoa oa Turbo [Karolo ea 3].
- clicks: Ho bulela mokhoa oa Strobe [Karolo ea 4].
Ho tšoara ka hlooho. Kamora ho tima mokhoa oa ho qetela o sebelisitsoeng o tšoaroa ka hlooho bakeng sa phihlello e potlakileng ha o bulela. Mekhoa e sireletsehileng ea khanya e phahameng. Mefuta ea Turbo e fana ka khanya e kholo ho fihlela mocheso oa toche le ho tsoa ha betri ha o fete boleng ba bohlokoa.
Digital Light Stabilization & Safe Soft-Start System E lumella nako ea ho sebetsa e ntseng e eketseha, fumana nako e telele ea bophelo ba betri e ka nchafatsoang hape 'me u e sireletse ho tsoa ho feta tekano kapa mocheso o feteletseng.
Taolo e sebetsang ea mocheso. Ha mocheso oa lebone o atamela ho +58 ° С, khanya e fokotseha ho ea boleng bo sireletsehileng, e lumellang toche ho qoba ho chesa ka nako e telele. Maemong a ho pholile ha moea hantle, toche e fana ka leseli ntle le ho theoha.
Letshwao la tlhokomediso e bonts'a boemo ba betri le mocheso ka har'a toche.
Boemo ba betri bo tlase. Ha boemo ba betri bo batla bo le <25%, 'mala oa LED o tla bontša boemo ba temoso ka ho benya lamunu hang ka metsotsoana e 2. Ka voltage fokotsa, khanya e tla qala ho fokotseha ka mehato bakeng sa polokeho ea betri le mosebelisi. Haeba khanya ea mohlala (ntle le mekhoa ea Firefly le Main1) e batla e le <25% ho tloha ho boleng bo tloaelehileng, LED e kholo e tla benya ka makhetlo a 2. Boemo ba betri ba bohlokoa bo ka bang <10% bo bontšoa ka ho benya bofubelu hang ka motsotsoana.
Mocheso o phahameng. Ha mocheso o nyolohela boemong ba temoso, 'mala oa LED o benya lamunu ka makhetlo a 3 hang ka metsotsoana e 2. Boemong bo boima, e khanya ka bofubelu ka makhetlo a 3 hang ka motsotsoana o le mong. Khanya e qala ho fokotseha ho isa boemong bo sireletsehileng.
Ts'ebetso ea ho notlela kantle. Tlosa sekoahelo sa mohatla ho 1/4 bakeng sa ts'ireletso khahlanong le ho bulela ka phoso. State Indication e tla tingoa.
Multicolor State Pontšo. Lits'oants'o tse khutšoane metsotsoana e meng le e meng ea 4 li bonts'a boemo ba betri esita le maemong a OFF (ho fihlela boemo ba betri bo theoha ho feta bo boima). Pontšo e boetse e thusa ho fumana toche lefifing.
Ho fetola Pontšo ea Naha ea Multicolor ON/OFF. Multicolor State Indication e na le mekhoa e 3 ea ts'ebetso:
- Letšoao le tingoe ka mekhoa ea Firefly le boemong ba OFF (ka kamehla).
- Pontšo e butsoe maemong afe kapa afe.
- Pontšo e tingoe sebakeng sefe kapa sefe.
Ho fetola mokhoa oa ho sebetsa, tlosa mohatla ho 1/4 ha toche e timme, tobetsa konopo 'me u boloke konopo e tiise,' me u lokolle mohatla hape. Mekhoa ea ts'ebetso e bonts'ang e tla fetoha ka lebelo. Li-setting li tla tšoaroa ka hlooho le ha betri e fetotsoe. Tšebeliso ea hona joale e tlase haholo e lumella pontšo ea mebala hore e sebetse nako e telele.
Litemoso
Bakeng sa ts'ebetso e sebetsang ea toche, re khothaletsa libeteri tse 21700 tsa Li-Ion. Hape, libeteri tsa 18650 Li-Ion tse sa feteng limilimithara tse 70 ka bophara tse fihlang ho 18.7 mm le bophara bo lumelletsoeng ba bonyane 15A li ka sebelisoa hammoho le adaptara ea betri.
Toche e ka chesa ka mekhoa ea Turbo, Strobe2 le Strobe3 kapele 'me ea ntša betri ka matla a holimo. Se ke oa e siea ntle le tlhokomelo ea hau kaha leseli le khanyang haholo le ka futhumatsa lintho le ho baka mollo. Ha ho lumelloe ho tjhaja betri ka har'a lebone ha mocheso o le ka tlase ho 0 °C.
- Kamehla latela litaelo tse tsoang bukeng ena le likhothaletso mabapi le tšebeliso ea betri.
- Sebelisa feela mehloli ea matla e khothalelitsoeng.
- Se ke oa khutlisa polarity ea betri.
- Se ke oa fetola kapa oa fetola toche le likarolo tsa eona kaha e tla u amoha tiisetso.
- Se ke oa lumella metsi kapa mokelikeli ofe kapa ofe ho kena ka har'a toche.
- Se ke oa shebisa toche e khantšitsoeng mahlong a batho kapa a liphoofolo - e ka baka bofofu ba nakoana.
- Se lumelle bana ho sebelisa toche ntle le thuso ea hau.
Mohlahisi a ke ke a jara boikarabello bakeng sa kotsi efe kapa efe e etsoang ho mosebelisi haeba ho joalo
e bakiloe ke tšebeliso e fosahetseng ea sehlahisoa.
Tlhokomelo le Polokelo
Ho khothalletsoa ho hloekisa likhoele le li-O-rings ho tlosa litšila le mafura a khale hanngoe kapa habeli ka selemo. Hopola hore tšireletso e ka tšeptjoang metsing le lerōleng e ke ke ea fanoa ka ho tiisoa ho tsoileng matsoho. Ho silafala hammoho le ho haella ha lubricant ho baka hore likhoele li tsoe ka potlako le mehele ea ho koala.
Ho hloekisa likhoele etsa tse latelang:
- Hlakola sekoahelo sa mohatla 'me u tlose reng e koalang ka hloko ka toothpick (u se ke ua sebelisa lintho tse hlabang tsa tšepe kaha li ka senya reng).
- Hlakola selikalikoe sa ho tiisa hantle ka lesela le bonolo (kapa lesela). U se ke ua sebelisa li-solvents. Haeba reng e tiisang e khathetse kapa e senyehile, e behe ka e ncha.
- Hloekisa likhoele tsa tšepe ka borashe u sebelisa ethanol. Ela hloko hore u se ke ua lumella mokelikeli o sebelisoang ho kena ka har'a toche kapa tailcap kaha o ka baka ho hloleha ho sebetsa ha toche.
Ka mor'a ho hloekisa, tlotsa khoele le reng e koalang ka oli ea silica e entsoeng ka polyol-photo olefin, mohlala, Nyogel 760G. Tšebeliso ea mefuta e meng ea mafura ha e amohelehe. Tabeng ea ts'ebetso e sebetsang le tšebeliso e mpe libakeng tse lerōle, ho khothalletsoa ho hloekisa le ho tlotsa likarolo hangata kamoo ho hlokahalang.
HA RE KHOTHALE ho siea mehloli ea matla ka har'a tochi bakeng sa nako e telele ea polokelo, kaha libeteri (haholo-holo tse sa rekoang) li ka tsoa ka mabaka a fapaneng mme tsa senya likarolo tse ka hare tsa lebone. Haeba u batla ho boloka toche ea hau e le maemong a matle e nang le libeteri, kenya libeteri tse ncha le tsa boleng bo holimo, boloka toche sebakeng se amohelehang bakeng sa mocheso o sebetsang oa libeteri, 'me u fetole boemo ba libeteri bonyane hang ka khoeli. Haeba u hlokometse matšoao leha e le afe a sekoli, tlosa libeteri ho flashlight 'me u li lahle.
Warranty le Tšebeletso
Armytek e fana ka tokiso ea tiisetso ea mahala bakeng sa lilemo tse 10 (ntle le libeteri, litjhaja, li-switches, le lihokelo, tse nang le waranti ea lilemo tse 2) ho tloha ka letsatsi la theko haeba ho na le
tokomane e netefatsang theko. Warranty ha e felle ho senya nakong ea:
- Tšebeliso e fosahetseng.
- Boiteko ba ho fetola kapa ho lokisa toche ke litsebi tse sa rutehang.
- E sebelisoa ka har'a metsi a chlorinated, a silafetseng kapa metsing a leoatle.
- Ho inela ka har'a maro haeba ho robehile ho sa dutle.
- Ho pepesehela mocheso o phahameng le lik'hemik'hale, ho kenyeletsoa le maro a tsoang libetering tse nang le bothata.
- Tšebeliso ea libeteri tsa boleng bo tlase.
Armytek
Jeremane, 10551 Berlin, Jonasstraße 6 +1 206-785-9574, service@armytek.com www.armytek.com
Litokomane / Lisebelisoa
 |
ARMYTEK Wizard C2 Pro Max Multi FlashLight [pdf] Bukana ea Mosebelisi Wizard C2 Pro, Max Multi FlashLight, Wizard C2 Pro Max Multi FlashLight, FlashLight |
 |
ARMYTEK WIZARD C2 PRO MAX Multi Flashlight [pdf] Bukana ea Mosebelisi WIZARD C2 PRO MAX Multi Flashlight, WIZARD C2 PRO MAX, Multi Flashlight, Flashlight |
 |
ARMYTEK WIZARD C2 PRO MAX Multi Flashlight [pdf] Bukana ea Mosebelisi WIZARD C2 PRO MAX Multi Flashlight, WIZARD C2 PRO MAX, Multi Flashlight, Flashlight |
