Tlhahlobo ea Sensor ea Aqara Zigbee Vibration
Tlhaloso
| Paramethara | Lintlha |
|---|---|
| Mohlala | DJT11LM |
| Protocol e se nang mohala | Zigbee 3.0 |
| Mofuta oa Leshala | CR2032 chelete ea tšepe |
| Bophelo ba Battery | Ho fihla ho lilemo tse 2 (ts'ebeliso e tloaelehileng) |
| Detection Types | Vibration, Tilt, and Drop |
| Mocheso oa ho sebetsa | -10°C ho ea ho +50°C |
| Mongobo o sebetsang | 0–95% RH (ha e kolekese) |
| Litekanyo | 36 × 36 × 9 limilimithara |
| Boima ba 'mele | Hoo e ka bang. 13 g |
| Ho lumellana | Works with Aqara Hub and other Zigbee gateways |
Sehlahisoa se Felletseview
The Aqara Zigbee Vibration Sensor detects motion-based changes such as vibration, tilt, or drops. It sends real-time alerts via the Aqara Home app when movement is detected. This device helps protect valuable items, monitor door/window activity, or detect unusual vibrations on surfaces.
Ho kenya
- Khetha sebaka:
- Install on objects or surfaces where vibration or tilt needs monitoring (e.g., drawers, safes, doors, washing machines).
- Hloekisa bokaholimo:
- Ensure the area is dry and dust-free before mounting.
- Attach the sensor:
- Use the provided adhesive pad to firmly stick the sensor in place.
- Connect to Hub:
- Open the Aqara Home app.
- Add the device by selecting “Add Accessory” → “Vibration Sensor”.
- Press the reset button for 5 seconds until the LED indicator blinks, indicating pairing mode.
- Follow in-app instructions to complete setup.
Tšebeliso
- Once connected, the sensor continuously monitors vibration, tilt, and drop events.
- When motion is detected, it triggers notifications or automations through the Aqara Hub.
- Customize sensitivity levels (Low, Medium, High) in the app for different environments.
- Common use cases:
- Detect unauthorized opening of drawers or doors.
- Monitor laundry machine vibration.
- Detect movement of valuable items.
Tlhophiso ea Marang-rang
- 1. Matla holim'a sehlahisoa.
- Anticlockwise rotating the battery cover to open.
- Tlosa filimi e kenyang betri ho matlafatsa sehlahisoa
Litaelo tsa ho Hloma
- Sebelisa setikara sa 3M ho maneha sehlahisoa sebakeng seo u batlang ho se etsa.
- Beha sensor sebakeng se loketseng.
Please read the manual carefully and use the product correctly. Thank you for purchasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.
Tlhaloso ea Sehlahisoa
- Press the RESET button for 3s and release the red LED will flash for network configuration.
- Tobetsa konopo ea RESET bakeng sa 3s 'me u lokolle, LED e khubelu e tla benya bakeng sa tlhophiso ea marang-rang.
- Set the zigbee gateway to add device status on the APP(Refer to the I gateway manual), search for the device.
- Note: Zigbee sensors must be connected to a Zigbee gateway in order to use.(Except TuyaÆwelink hub)
Likarolo tsa Bohlokoa
- 3-in-1 Detection: Identifies vibration, tilt, and drop events.
- Real-Time Alerts: Sends instant notifications via the Aqara Home app.
- Smart Home Integration: Supports automation with other Aqara or HomeKit devices.
- Long Battery Life: Low power consumption with up to 2 years of use.
- Compact Design: Lightweight and easy to install on any surface.
- Adjustable Sensitivity: Choose detection level based on your needs.
- Wide Compatibility: Works with Aqara Hub, HomeKit, Alexa, and Zigbee ecosystems.
FAQs
How do I reset the Aqara Vibration Sensor?
Press and hold the reset button for about 5 seconds until the LED indicator blinks three times, indicating successful reset.
A na nka sebelisa sensor kantle?
The sensor is designed for indoor use. Outdoor installation is not recommended due to potential exposure to moisture and extreme temperatures.
Why is my sensor not responding?
Ensure the battery is not depleted, the sensor is within range of the Zigbee hub, and the connection has not been interrupted. Try re-pairing the device if necessary.
Litokomane / Lisebelisoa
 |
Tlhahlobo ea Sensor ea Aqara Zigbee Vibration [pdf] Bukana ea Mosebelisi Ho lemoha Sensor ea Zigbee Vibration, Ho lemoha Sensor ea Vibration, Ho Fumana Sensor |