AOC CU34V5C/BK LCD Monitor
Tlhahisoleseding ya Sehlahiswa
LCD Monitor CU34V5C/BK ke sebali se sebetsang hantle haholo
e entsoeng ke AOC. Monitor e na le skrine ea 34-inch e kobehileng e fanang ka metsi viewka boiphihlelo. Monitor e tla le plug e methapo e meraro 'me e sebetsa mohloling oa matla pakeng tsa 100-240V AC, Min. 5A. Sehlahisoa se na le moralo o motle le oa morao-rao 'me o fumaneha ka' mala o motšo.
Litaelo tsa Tšireletseho
- Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng.
- Etsa bonnete ba hore sokete ea lebota e kentsoe haufi le lisebelisoa mme e fumaneha habonolo.
- Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele.
- Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng.
- Se ke oa beha leihlo koloing e sa tsitsang, sethala, tripod, bracket kapa tafoleng.
- Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo.
- U se ke ua tšolla maro holim'a mochine.
Litaelo tsa ho Hloma
- Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena.
- Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
- Tlohela sebaka se itseng ho potoloha sebono bakeng sa moea o lekaneng. Libaka tse khothalelitsoeng tsa moea li fanoe bukeng ea mosebelisi.
- Ho qoba ts'enyo e ka bang teng, etsa bonnete ba hore sebatli ha se sekame ho ea tlase ka likhato tse fetang -5.
Litaelo tsa ho Hloekisa
- Hloekisa khabinete khafetsa ka metsi-damped, lesela le bonolo.
- Lesela le lokela ho ba damp mme e batla e omme. Se ke oa lumella mokelikeli ka har'a mokotla.
- Tlosa thapo ea motlakase pele u hloekisa sehlahisoa.
Polokeho
Likopano tsa Naha
Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.
Lintlha, Litemoso, le Litemoso
- Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang:
- HLOKOMELA: TLHOKOMELISO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
- TLHOKOMELISO: TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho Hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata.
- TLHOKOMELISO: TEMOSO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella kamoo u ka qobang bothata boo kateng. Litemoso tse ling li ka hlaha ka lifomate tse ling 'me li kanna tsa se felehetsoe ke aekhone. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
Matla
- Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
- Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
- Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
- Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
- Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
- Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
Ho kenya
- Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
- Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
- U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
- Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
- Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.
- Ho qoba tšenyo e ka bang teng, mohlalaampha phanele e ebola ho tloha bezel, etsa bonnete ba hore sebatli ha se sekame ho ea tlase ka likhato tse fetang -5. Haeba tekanyo ea -5-degree downward tilt angle e ka fetisoa, tšenyo ea leihlo e ke ke ea koaheloa tlas'a tiisetso.
- Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
E kentsoe ka stand
Ho hloekisa
- Hloekisa khabinete khafetsa ka metsi-damped, lesela le bonolo.
- Ha u hloekisa sebelisa k'hothone e bonolo kapa lesela la microfiber. Lesela le lokela ho ba damp 'me hoo e batlang e omme, u se ke ua lumella mokelikeli ho kena ka har'a mokotla.
- Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
Tse ding
- Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
- Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
- Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
- U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.
- Lithapo tsa motlakase e tla ba ts'ireletso e amoheloang. Bakeng sa Jeremane, e tla ba H03VV-F, 3G, 0.75 mm2, kapa ho feta. Bakeng sa linaha tse ling, mefuta e loketseng e tla sebelisoa ka nepo.
- Khatello e feteletseng ea molumo e tsoang li-earphone le li-headphones e ka baka tahlehelo ea kutlo. Ho feto-fetoha ha tekanyo ea ho lekana ho eketsa molumo oa li-earphone le li-headphonestage mme ka hona boemo ba khatello ea molumo.
Tlhophiso
Tse ka Hare ho Lebokose
Ha se lithapo tsohle tsa mats'oants'o tse tla fanoa bakeng sa linaha tsohle le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.
Seta Stand & Base
Ka kopo, hlophisa kapa u tlose metheo ho latela mehato e ka tlase.
Ho fetola ViewAngle
- Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea ka seo u se ratang.
- Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.
- O khona ho fetola li-monitor ka tsela e latelang:
HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. Ho ama skrineng sa LCD ho ka baka tšenyo.
Tlhokomediso:
- Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Cho hokela Monitor
Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:
- HDMI
- DP
- USB-C
- Earphone
- USB3.2 Gen1+chargingx1
USB3.2 Gen1x1 - USB3.2 Gen1x2
- Matla
Hokela ho PC
- Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
- Koala komporo ea hau 'me u lokolle thapo ea motlakase.
- Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
- Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
- Bulela komporo ea hau 'me u bontshe.
Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata.
Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.
Ho Hloma Lebota
Ho Lokisetsa ho Kenya Letsoho la Boikhethelo la Lebota (Sekhahla sa Screw ke M4 mme bolelele ke 10mm).
Monitor ena e ka hokelloa leboteng la letsoho leo u le rekang ka thoko. Tlosa motlakase pele ho ts'ebetso ena.
Latela mehato ena:
- Tlosa setsi.
- Latela litaelo tsa moetsi ho kopanya lebota la letsoho le ntseng le hola.
- Beha letsoho la lebota ka morao ho sehlahlo. Hlophisa masoba a letsoho le masoba ka morao ho sehlahlo.
- Hokela lithapo hape. Sheba buka ea mosebedisi e tlileng le letsoho la boikhethelo la ho hloma lebota bakeng sa litaelo tsa ho le hokela leboteng.
Ela hloko: Li-screw masoba tsa VESA ha li fumanehe bakeng sa mefuta eohle, ka kopo ikopanye le morekisi kapa lefapha la semmuso la AOC.
Sebopeho sa pontšo se ka fapana le se bontšitsoeng.
Tlhokomediso:
- Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Mosebetsi oa AMD FreeSync (E fumaneha bakeng sa mefuta e khethiloeng)
- Mosebetsi oa AMD FreeSync o sebetsa le DP/HDMI/USB C
- Karete ea litšoantšo e lumellanang: Lethathamo la khothaletso le tšoana le le ka tlase, hape le ka hlahlojoa ka ho etela www.AMD.com
Likarete tsa Graphics
- Radeon ™ RX Vega letoto lena
- Radeon ™ RX 500 letoto lena
- Radeon ™ RX 400 letoto lena
- Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano letoto lena
- Letoto la Radeon™ R9 Fury
- Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)
Lisebelisoa
- AMD Ryzen™ 7 2700U
- AMD Ryzen™ 5 2500U
- AMD Ryzen™ 5 2400G
- AMD Ryzen™ 3 2300U
- AMD Ryzen™ 3 2200G
- AMD PRO A12-9800
- AMD PRO A12-9800E
- AMD PRO A10-9700
- AMD PRO A10-9700E
- AMD PRO A8-9600
- AMD PRO A6-9500
- AMD PRO A6-9500E
- AMD PRO A12-8870
- AMD PRO A12-8870E
- AMD PRO A10-8770
- AMD PRO A10-8770E
- AMD PRO A10-8750B
- AMD PRO A8-8650B
- AMD PRO A6-8570
- AMD PRO A6-8570E
- AMD PRO A4-8350B
- AMD A10-7890K
- AMD A10-7870K
- AMD A10-7850K
- AMD A10-7800
- AMD A10-7700K
- AMD A8-7670K
- AMD A8-7650K
- AMD A8-7600
- MD A6-7400K
Ts'ebetso ea Adaptive-Sync (E teng bakeng sa mefuta e khethiloeng)
- Sesebelisoa sa Adaptive-Sync se sebetsa le DP/HDMI/USB C
- Karete ea litšoantšo e lumellanang: Lethathamo la khothaletso le tšoana le le ka tlase, hape le ka hlahlojoa ka ho etela www.AMD.com
Likarete tsa Graphics
- Radeon ™ RX Vega letoto lena
- Radeon ™ RX 500 letoto lena
- Radeon ™ RX 400 letoto lena
- Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano letoto lena
- Letoto la Radeon™ R9 Fury
- Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)
Lisebelisoa
- AMD Ryzen™ 7 2700U
- AMD Ryzen™ 5 2500U
- AMD Ryzen™ 5 2400G
- AMD Ryzen™ 3 2300U
- AMD Ryzen™ 3 2200G
- AMD PRO A12-9800
- AMD PRO A12-9800E
- AMD PRO A10-9700
- AMD PRO A10-9700E
- AMD PRO A8-9600
- AMD PRO A6-9500
- AMD PRO A6-9500E
- AMD PRO A12-8870
- AMD PRO A12-8870E
- AMD PRO A10-8770
- AMD PRO A10-8770E
- AMD PRO A10-8750B
- AMD PRO A8-8650B
- AMD PRO A6-8570
- AMD PRO A6-8570E
- AMD PRO A4-8350B
- AMD A10-7890K
- AMD A10-7870K
- AMD A10-7850K
- AMD A10-7800
- AMD A10-7700K
- AMD A8-7670K
- AMD A8-7650K
- AMD A8-7600
- MD A6-7400K
Ho fetola
Li-hotkeys
- Mohloli/Tsoa/Holimo
- Eco/DCR/Down
- Hlakola Pono/Letshehadi
- Bolumo/Ka ho le letona
- Matla/ Menu/Kena
Menu/kena
Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho. Tobetsa metsotsoana e ka bang 2 ho tima mochine.
Matla
Tobetsa konopo ea Matla ho bulela mochine.
Bolumo/Ka ho le letona
Ha OSD e le sieo, Tobetsa konopo ea Bolumo ho bareng ea ho fetola molumo o sebetsang, Tobetsa Leqeleng kapa Ka ho le letona ho lokisa molumo.
Mohloli/Tsoa
Ha OSD e koetsoe, tobetsa konopo ea Source / Exit e tla ba Mohloli oa hot hot mosebetsi.
Eco /DCR/Down
Ha OSD e le sieo, Tobetsa konopo ena ho kenya phetoho ea Eco/DCR. Ebe o tobetsa konopo ea Leqele kapa le letona ho khetha Eco/DCR e fapaneng.
Pono e Hlakileng
- Ha ho se na OSD, Tobetsa konopo ea "Left" ho kenya tshebetsong Clear Vision.
- Sebelisa likonopo tsa "Le letšehali" kapa "Ka ho le letona" ho khetha pakeng tsa li-setting tse fokolang, tse mahareng, tse matla kapa tse koetsoeng. Litlhophiso tsa kamehla li "tima".
- Tobetsa 'me u tšoare konopo ea "Left" bakeng sa metsotsoana e 5 ho kenya tšebetsong Demo e hlakileng ea Vision,' me molaetsa oa "Demo e hlakileng ea Vision: on" e tla hlaha skrineng nako ea metsotsoana e 5. Tobetsa 'me u tšoare konopo ea "Left" bakeng sa metsotsoana ea 5 hape, Demo ea Clear Vision e tla tima.
Mosebetsi o hlakileng oa Vision o fana ka setšoantšo se setle ka ho fetisisa viewho ba le boiphihlelo ka ho fetolela litšoantšo tse hlakileng le tse lerootho hore e be litšoantšo tse hlakileng le tse hlakileng.
Litlhophiso tsa OSD
Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
- Tobetsa konopo ea MENU ho kenya fensetere ea OSD.
- Tobetsa ka ho le letšehali kapa ka ho le letona ho tsamaea ka har'a lits'ebetso. Hang ha ts'ebetso e lakatsehang e totobalitsoe, tobetsa konopo ea MENU ho e kenya tšebetsong, tobetsa Le letšehali kapa ka ho le letona ho tsamaea ka har'a li-menu tse nyane. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo ea MENU ho e kenya tšebetsong.
- Tobetsa ka ho le letšehali kapa ka ho le letona ho fetola li-setting tsa mosebetsi o khethiloeng. Tobetsa "Exit"-konopo ho tsoa. Haeba u batla ho fetola ts'ebetso e 'ngoe, pheta mehato ea 2-3.
- Mosebetsi oa OSD Lock / Notlolla: Ho notlela kapa ho notlolla OSD, tobetsa o hatelle konopo ea Down-ha bakeng sa 10s ha ts'ebetso ea OSD e sa sebetse.
Lintlha:
- Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe hore e lokisoe.
- Mekhoa ea ECO (ntle le mokhoa o tloaelehileng), Pono e hlakileng, DCR, DCB mode le Picture Boost, bakeng sa tsena e bolela hore naha e le 'ngoe feela e ka ba teng.
Leseli
Hlokomela:
Ha HDR e fumanoa, khetho ea HDR e bontšoa bakeng sa ho lokisoa; ha HDR e sa fumanwe, kgetho ya HDR Mode e tla bontshwa bakeng sa tokiso.
Ho Hlophisa Mebala
Matlafatsa Litšoantšo
Hlokomela:
Fetosa ho khanya, phapang, le boemo ba Frame e Khanyang hore e be betere viewka boiphihlelo.
Setup ea OSD
Tlhophiso ea PIP
Sheba lethathamo le ka tlase bakeng sa tšebelisano-'moho le mohloli o ka sehloohong
| Sub Main | HDMI | DP | USB-C |
| HDMI | V | V | V |
| DP | V | V | V |
| USB-C | V | V | V |
* Litokiso tse amanang le mebala ea PxP li ka sebetsoa feela ke mantlha, 'me sub ha e tšehetsoe.
Kahoo Main & sub e tla ba le mebala e fapaneng.
Litlhophiso tsa Lipapali
Hlokomela:
Ha "HDR Mode" tlas'a "Khanya" e behiloe boemong boo e seng ba ho tima, "Game Mode", "Dark Field Control", le "Game Tone" tlas'a "Game Settings" li ke ke tsa fetoloa.
Eketsa
Etsoa
Letšoao la LED
|
Boemo |
Mmala oa LED |
| Mokhoa o felletseng oa Matla | Bosoeu |
| Mokhoa oa ho tima | namunu |
Tharollo ya mathata
|
Bothata & Potso |
Litharollo Tse ka khonehang |
|
Matla a LED ha a TSOE |
Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo. |
|
Ha ho litšoantšo skrineng |
Na thapo ea motlakase e hokahane hantle?
Lekola khokahano ea thapo ea motlakase le phepelo ea motlakase. Na thapo ya video e hoketswe ka nepo? (E hoketsoe ka thapo ea HDMI) Sheba khokahano ea thapo ea HDMI. (E hoketsoe ka thapo ea DP) Lekola khokahano ea cable ea DP. * Tlhahiso ea HDMI/DP ha e fumanehe mofuteng o mong le o mong. Haeba matla a le teng, qala komporo hape ho bona skrine ea pele (ho kena skrineng.) Haeba skrineng sa pele (skrine sa ho kena) se hlaha, qala komporo ka har'a komporo mokhoa o sebetsang (mokhoa o bolokehileng oa Windows 7/ 8/10) ebe o fetola makhetlo a karete ea video. (Sheba ho Setting ea Optimal Resolution) Haeba skrine ea pele (skrine ea ho kena) e sa hlahe, ikopanye le Tšebeletso Setsi kapa morekisi oa hau. A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng ka ho fetesisa le maqhubu ao sebonoa se ka sebetsanang le ona hantle. Fetola boholo ba qeto le maqhubu ao monitor e ka sebetsanang le ona hantle. Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe. |
|
Setšoantšo se Fuzzy & Has Ghosting Shadowing Bothata |
Fetola Litaolo tsa Phapano le Khanya. Tobetsa hot-key (AUTO) ho itlhophisa.
Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho kenya sebali ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka morao. |
| Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong | Suthisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole
ho tloha ho shebella ka hohle kamoo ho ka khonehang. Sebelisa sekhahla se phahameng sa ho khatholla seo leihlo la hau le ka se khonang ha u etsa qeto u sebelisa. |
|
Monitor o ntse a sa sebetse- Mokhoa” |
The Computer Power Switch e lokela ho ba boemong ba ON. Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona.
Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. Lebone la LED le lokela ho BUA kapa HO TLOA ka mor'a ho otla konopo ea CAPS LOCK. |
| Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE) |
Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. |
| Setšoantšo sa skrini ha se bohareng kapa boholo bo nepahetseng | Fetola Boemo ba H le Boemo ba V kapa o tobetse hot-key (AUTO). |
| Setšoantšo se na le mathata a mebala
(bosoeu ha bo shebahale bo le tšoeu) |
Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. |
| Litšitiso tse tšekaletseng kapa tse emeng skrineng | Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa hot-key (AUTO) ho itlhophisa. |
|
Taolo & Tshebeletso |
Ka kopo sheba Litaba tsa Melao le Litšebeletso tse bukeng ea CD
kapa www.aoc.com (ho fumana mohlala oo u o rekileng naheng ea heno le ho o fumana Regulation & Service Information in Support leqepheng la. |
Tlhaloso
Tlhaloso e Akaretsang
|
Phanele |
Lebitso la mohlala | CU34V5C/BK | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 86.4 cm e diagonane | |||
| Sekhahla sa pixel | 0.23175mm(H) x 0.23175mm(V) | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30k-160kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 797.22 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-100Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 333.72 limilimithara | |||
| Qeto e nepahetseng esale pele | 3440×1440@60Hz | |||
| Qeto e phahameng | 3440×1440@100Hz(HDMI/DP/USB C*) | |||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 100-240V~, 50/60Hz, 3A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 60W | ||
| Max. (khanya = 100, phapang =100) | ≤ 190W | |||
| Boemo ba standby | ≤ 0.5W | |||
| Ea nama
Litšobotsi |
Mofuta oa Sehokelo | HDMI/DP/USB C/USB×4/Earphone | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
*Tlhokomeliso: Kenyelletso ea lets'oao la USB C (DP Alt), 'me "USB" e behiloe ho "2.0", qeto e phahameng ke 3440 × 1440@100Hz moeli oa tlhahiso ea likarete tse ling tsa litšoantšo, ho ka ba le liphapang) :
|
CU34V5C/BK |
422/420 | 444/RGB | 422/420 | 444/RGB | 422/420 | 444/RGB | ||
| ( HDMI2.0 ) | ( HDMI2.0 ) | (DP1.2) | (DP1.2) | USBC@
USB3.2 |
USBC@
USB2.0 |
USBC@
USB3.2 |
USBC@
USB2.0 |
|
| WQHD 100Hz 8 bit | OK | OK | OK | OK | NA | OK | NA | OK |
| WQHD 60Hz 8 bit | OK | OK | OK | OK | OK | OK | OK | OK |
| liqeto tse tlaase 8 bit | OK | OK | OK | OK | OK | OK | OK | OK |
Seta pele Mekhoa ea Pontšo
| TS'ELISO | TSIETSO | TS'ELISO
FREQUENCY(kHz) |
MOEKETSI
FREQUENCY(Hz) |
|
VGA |
640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
|
SVGA |
800×600@60Hz | 37.879 | 60.317 |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
|
Katoloso ea XGA |
1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
|
SXGA |
1280×1024@60Hz | 63.981 | 60.020 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
|
WXGA+ |
1440×900@60Hz | 55.935 | 59.887 |
| 1440×900@60Hz | 55.469 | 59.901 | |
|
WSXGA |
1680×1050@60Hz | 65.290 | 59.954 |
| 1680×1050@60Hz | 64.674 | 59.883 | |
| HD | 1920×1080@60Hz | 67.5 | 60 |
|
QHD |
2560×1080@60HZ | 66 | 60 |
| 2560×1080@50HZ | 56.25 | 50 | |
|
WQHD |
3440×1440@60HZ | 89.819 | 59.973 |
| 3440×1440@100HZ | 150.972 | 99.982 | |
| MAC MEKHOA | |||
| VGA | 640×480@67Hz | 35.000 | 66.667 |
| SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Katoloso ea XGA | 1024×768@75Hz | 60.241 | 74.927 |
Likabelo tsa Pin
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Lintlha tsa TMDS 2+ | 9. | Lintlha tsa TMDS 0- | 17. | Lebala la DDC / CEC |
| 2. | TMDS Data 2 Sireletso | 10. | Oache ea TMDS + | 18. | + 5V Matla |
| 3. | Lintlha tsa TMDS 2- | 11. | Theko ea TMDS Clock | 19. | Hot polaka lemoha |
| 4. | Lintlha tsa TMDS 1+ | 12. | Nako ea TMDS- | ||
| 5. | Lintlha tsa TMDS 1Shield | 13. | CEC | ||
| 6. | Lintlha tsa TMDS 1- | 14. | E bolokiloe (NC ho sesebelisoa) | ||
| 7. | Lintlha tsa TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Sireletso | 16. | SDA |
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (leq) |
| 3 | ML_Lane 3 (leq) | 13 | TIISETSO 1 |
| 4 | ML_Lane 2 (n) | 14 | TIISETSO 2 |
| 5 | GND | 15 | AUX_CH (leq) |
| 6 | ML_Lane 2 (leq) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Hot polaka lemoha |
| 9 | ML_Lane 1 (leq) | 19 | Khutlisetsa DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | EA-DP_PWR |
Hokela le ho Bapala
Plug & Play DDC2B Feature
- Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
- DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
Litokomane / Lisebelisoa
 |
AOC CU34V5C/BK LCD Monitor [pdf] Bukana ea Mosebelisi CU34V5C BK LCD Monitor, CU34V5C BK, LCD Monitor, Monitor |
