Setšoantšo sa AOC AG274QXM LCD

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Mohlala: AG274QXM
• Moetsi: AOC
• Mohloli oa Matla: 100-240V AC, Min. 5A
• Mohlala oa Adapter ea Matla: DELTA ELECTRONICS INC. ADP-330CB B

Litaelo tsa Tšebeliso ea Sehlahisoa

Polokeho

• Mohloli o lokela ho sebetsoa feela ho tsoa mohloling o boletsoeng oa matla.
• Netefatsa hore motlakase o theohile hantle ho thibela ho tsosoa ha motlakase.
• Ntša sebono nakong ea lifefo tsa lehalima kapa nako e telele e sa sebelisoe ho thibela tšenyo e bakoang ke ho phahama ha motlakase.
• Se ke oa jarisa lithapo tsa motlakase kapa lithapo tse atolositsoeng ho qoba likotsi tsa mollo.
• Sebelisa monitor feela ka likhomphutha tse thathamisitsoeng ke UL ka har'a molumo o boletsoengtage fapaneng.

Ho kenya

• Beha seipone sebakeng se tsitsitseng se khothalletsoang ke moetsi.
• Se ke oa kenya lintho ka har'a mekotla ea ho beha leihlo ho thibela tšenyo.
• Qoba ho qhalla lintho tse metsi holim'a mochine.
• Boloka moea o nepahetseng o pota-potileng mochine ho thibela mocheso o feteletseng le likotsi tse ka bang teng tsa mollo.
• Sebelisa lisebelisoa tsa ho hlomamisa tse lumelletsoeng 'me u latele litaelo tsa moetsi bakeng sa ho kenya lebota kapa shelofo.
• Netefatsa hore sebapali ha se sekame ka likhato tse fetang -5 ho thibela tšenyo e sa koaheloang tlas'a tiisetso.

Polokeho

Likopano tsa Naha

• Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.

Lintlha, Litemoso, le Litemoso

• Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng.
• Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang.
• HLOKOMELA: TLHOKOMELISO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
• TLHOKOMELISO: TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho Hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata.
• TLHOKOMELISO: TEMOSO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella kamoo u ka qobang bothata boo kateng.
• Litemoso tse ling li ka hlaha ka mekhoa e meng 'me li ka 'na tsa se tsamaee le letšoao. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.

Matla

• Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
• Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo).
• Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng.
• Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
• Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
• Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
• Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
• Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
• E sebelisoa feela ka adaptara ea motlakase e hokeletsoeng
• Baetsi: Litlhaloso tsa likarolo tsa DELTA ELECTRONICS INC.
• Mohlala: ADP-330CB B

Ho kenya

• Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena.
• Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi.
• Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka tlhokomelo.
• Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho, ea baka mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
• U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
• Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
• Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, ho potoloha ha moea ho ka 'na ha se ke ha lekana, kahoo ho chesa haholo ho ka baka mollo kapa ho senya mochine.
• Ho qoba tšenyo e ka bang teng, mohlalaample, phanele e ebolang ho tloha bezel, etsa bonnete ba hore leihlo ha le sekame ho ea tlase ka likhato tse fetang -5.
• Haeba tekanyo ea -5-degree downward tilt angle e ka fetisoa, tšenyo ea leihlo e ke ke ea koaheloa tlas'a tiisetso.
• Sheba ka tlase ho kgothaletswa hore ho be le libaka tsa moea tse pota-potileng mochine ha mochine o kenngoa leboteng kapa ho ema :.

E kentsoe ka stand

Ho hloekisa

• Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla, se tla thibela khabinete ea lihlahisoa.
• Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
• Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.

Tse ding

• Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
• Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
• Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
• U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.

Tlhophiso

Tse ka Hare ho Lebokose

• Ha se lithapo tsohle tse tla fanoa bakeng sa linaha le libaka.
• Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.

Seta Stand & Base

• Ka kopo, theha kapa u tlose metheo ho latela mehato e ka tlase.

Tlhophiso:

Tlosa:

Ho fetola leihlo

• Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea kamoo u ratang kateng.
• Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.

U ka fetola li-monitor ka tsela e latelang:

• HLOKOMELA: U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD.
• Tlhokomediso Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
• Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.

Ho hokela Mohlahlobi

Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:

1. Microphone e kene
2. Earphone (E kopantsoe le Microphone)
3. USB3.2 Gen1 e tlase + ho tjhaja kapele
4. USB3.2 Gen1 tlase ho noka
5. USB3.2 Gen1 holimo
6. Matla
7. HDMI1
8. HDMI2
9. DP
10. USB C
11. Microphone ha e sebetse (Hokela ho PC)
12. Quick Switch port
13. Hokela ho PC
    1. Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
    2. Koala komporo ea hau 'me u lokolle thapo ea motlakase.
    3. Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
    4. Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
    5. Bulela komporo ea hau 'me u bontshe.
       • Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba ho Tharollo ea Mathata.
       • Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.

Ho Hloma Lebota

• Ho Lokisetsa ho Kenya Letsoho la Boikhethelo le Tlamang Lebota.
• Monitor ena e ka hokelloa leboteng la letsoho leo u le rekang ka thoko. Tlosa motlakase pele ho ts'ebetso ena.

Latela mehato ena:

• Tlosa setsi.
• Latela litaelo tsa moetsi ho kopanya lebota la letsoho le ntseng le hola.
• Beha letsoho la lebota ka morao ho sehlahlo. Hlophisa masoba a letsoho le masoba ka morao ho sehlahlo.
• Hokela lithapo hape. Sheba buka ea mosebedisi e tlileng le letsoho la boikhethelo la ho hloma lebota bakeng sa litaelo tsa ho le hokela leboteng.
• Ela hloko: Li-screw masoba tsa VESA ha li fumanehe bakeng sa mefuta eohle, ka kopo ikopanye le morekisi kapa lefapha la semmuso la AOC.
• Sebopeho sa pontšo se ka fapana le se bontšitsoeng.

Tlhokomediso

1. Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
2. Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.

Mosebetsi oa Adaptive-Sync

E fumaneha bakeng sa mefuta e khethiloeng

1. Mosebetsi oa Adaptive-Sync o sebetsa le DP / HDMI
2. Karete ea Graphics e Ts'oarellang: Lethathamo la khothaletso le tjena, hape le ka hlahlojoa ka ho etela KGOTSO
   • Radeon™ Letoto la RX Vega
   • Radeon™ Letoto la RX500
   • Radeon™ Letoto la RX400
   • Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
   • Radeon™ Pro Duo (2016)
   • Radeon™ Letoto la R9 Nano
   • Radeon™ Letoto la R9 Fury
   • Radeon™ R9/R7 200 letoto (R9 270/X, R9 280/X ntle le)

Mosebetsi oa AMD FreeSync Premium (E fumaneha bakeng sa mefuta e khethiloeng)

1. Mosebetsi oa premium oa AMD Freesync o sebetsa le DP/HDMI
2. Karete ea Graphics e Ts'oarellang: Lethathamo la khothaletso le tjena, hape le ka hlahlojoa ka ho etela KGOTSO
   • Radeon ™ RX Vega letoto lena
   • Radeon ™ RX 500 letoto lena
   • Radeon ™ RX 400 letoto lena
   • Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
   • Radeon ™ Pro Duo (2016)
   • Radeon ™ R9 Nano letoto lena
   • Letoto la Radeon™ R9 Fury
   • Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)

HDR

• E lumellana le matshwao a ho kenya ka sebopeho sa HDR10.
• Pontsho e ka nna ya kenya tshebetsong tshebetso ya HDR ka bo yona ha sebapala le dikateng di tsamaellana.
• Ka kopo, ikopanye le moetsi oa sesebelisoa le mofani oa litaba bakeng sa tlhahisoleseling mabapi le tšebelisano ea sesebelisoa sa hau le litaba. Ka kopo, khetha "OFF" bakeng sa ts'ebetso ea HDR ha o sa hloke ts'ebetso ea othomathike.

Hlokomela:

1. Ha ho tlhophiso e khethehileng e hlokahalang bakeng sa sebopeho sa DisplayPort/HDMI ho Windows 10 mefuta e tlase (ea khale) ho feta V1703.
2. Ke sebopeho sa HDMI feela se fumanehang mme sebopeho sa DisplayPort se ke ke sa sebetsa ho Windows 10 mofuta oa V1703.
3. 3840×2160 @50Hz /60Hz ha e khothalletsoe hore e sebelisoe lisebelisoa tsa PC feela bakeng sa sebapali sa UHD kapa Xbox-ones / PS4 Pro.
   • a. Qeto ea ponts'o e behiloe ho 2560 * 1440, 'me HDR e setiloe esale pele ho ON. Tlas'a maemo ana, skrini se ka 'na sa fifala hanyane, ho bontšang hore HDR e kentsoe tšebetsong.
   • b. Kamora ho kenya kopo, phello e ntle ka ho fetisisa ea HDR e ka finyelloa ha qeto e fetoloa ho 2560 * 1440 (haeba e le teng).

Ho fetola

Li-hotkeys

1	Mohlodi/Hodimo
2	Dial Point/Down
3	Mokhoa oa Papali/Ka ho le letšehali
4	Leseli FX / Ho le letona
5	Matla/ ​​Menu/Kena

• Matla / Menu / Enter
  • Tobetsa konopo ea Matla ho bulela mochine.
  • Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho. Tobetsa metsotsoana e ka bang 2 ho tima sehlahlo.
• Dial Point/Down
  • Ha OSD e le sieo, tobetsa konopo ea Dial Point ho bontša/pata Sebaka sa ho daela.
• Mokhoa oa Papali/Ka ho le letšehali
  • Ha ho se OSD, tobetsa "Left" key to open game mode function, then press "Left" or "Right" key to choose game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) based on the mefuta e fapaneng ea papali.
• Leseli FX / Ka ho le letona
  • Ha OSD e le sieo, tobetsa konopo ea "Right" ho kenya tšebetsong Light FX.
• Mohlodi/Hodimo
  • Ha OSD e koetsoe, ho tobetsa konopo ea Source / Auto / Up e tla ba mosebetsi oa Mohloli o chesang oa Mohloli.

Quick Switch

• ◄: Ha OSD e le sieo, tobetsa konopo ea ◄ ho bula tšebetso ea mofuta oa papali, ebe u tobetsa ◄ kapa ► konopo ho khetha mofuta oa papali (FPS, RTS, Racing, Gamer 1, Gamer 2 kapa Gamer 3) ho latela mefuta e fapaneng ea papali.
• ►: Ha ho se na OSD, tobetsa konopo ea "Le letona" ho kenya tšebetsong Light FX. Lenane/Ho lokile:
  • Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho.
• ▲: Ha OSD e koetsoe, konopo ea▲ e tla ba mosebetsi oa senotlolo sa Mohloli o chesang.
• ▼: Ha OSD e le sieo, tobetsa konopo ea Dial Point ho bontša/pata Dial Point.
  1. Tobetsa konopo ea 1 ho khetha mokhoa oa Gamer 1
  2. Tobetsa konopo ea 2 ho khetha mokhoa oa Gamer 2
  3. Tobetsa konopo ea 3 ho khetha mokhoa oa Gamer 3
• Tobetsa ho tsoa OSD.

OSD Key Guide menu

• Kena: Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
• Sutha: Sebelisa konopo ea Leqele / Holimo / Tlase ho tsamaisa khetho ea OSD
• Etsoa: Sebelisa konopo ea Right ho tsoa OSD
• Kena: Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
• Sutha: Sebelisa konopo ea Right / Up / Down ho tsamaisa khetho ea OSD
• Etsoa: Sebelisa konopo ea Left ho tsoa OSD
• Kena: Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
• Sutha: Sebelisa konopo ea Holimo / Tlase ho tsamaisa khetho ea OSD
• Etsoa: Sebelisa konopo ea Left ho tsoa OSD
• Sutha: Sebelisa Senotlolo sa Leqele / Le letona / Holimo / Tlase ho tsamaisa khetho ea OSD
• Etsoa: Sebelisa konopo ea Left ho tsoa OSD ho ea boemong bo fetileng ba OSD
• Kena: Sebelisa konopo e nepahetseng ho kenya boemo bo latelang ba OSD
• Khetha: Sebelisa konopo ea Holimo / Tlase ho tsamaisa khetho ea OSD
• Kena: Sebelisa konopo ea Enter ho sebelisa maemo a OSD le ho khutlela boemong bo fetileng ba OSD
• Khetha: Sebelisa konopo ea Down ho lokisa maemo a OSD
• Khetha: Sebelisa konopo ea Up / Down ho fetola maemo a OSD
• Kena: Sebelisa konopo ea Enter ho tsoa OSD ho ea boemong bo fetileng ba OSD
• Khetha: Sebelisa konopo e ka ho le letšehali / ho le letona ho fetola maemo a OSD

Litlhophiso tsa OSD

Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.

1. Tobetsa konopo ea MENU ho kenya fensetere ea OSD.
2. Latela Key Guide ho tsamaisa kapa ho khetha (fetola) li-setting tsa OSD
3. Mosebetsi oa OSD Lock / Notlolla: Ho notlela kapa ho notlolla OSD, tobetsa o hatelle Down–konopo bakeng sa 10s ha tšebetso ea OSD e sa sebetse.

Lintlha:

1. Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe hore e lokisoe.
2. Mekhoa ea ECO (ntle le Standard mode), DCR le DCB mode, bakeng sa linaha tsena tse tharo, ho ka ba le naha e le 'ngoe feela.

Litlhophiso tsa Lipapali

	Mokhoa oa Papali	FPS	Bakeng sa ho bapala lipapali tsa FPS (Lithunya tsa Motho oa Pele). E ntlafatsa theme e lefifi, lintlha tsa boemo bo botšo.
		RTS	Bakeng sa ho bapala RTS (Real Time Strategy). E ntlafatsa boleng ba setšoantšo.
		Peisong	Bakeng sa ho bapala lipapali tsa Peiso, e fana ka nako e potlakileng ea karabo le mebala e phahameng.
		Sebapali sa 1	Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 1.
		Sebapali sa 2	Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 2.
		Sebapali sa 3	Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 3.
		tima	Ha ho ntlafatso ea papali ea Smart Image
	Taolo ea Moriti	0-100	Shadow Control Default ke 50, joale mosebelisi a ka fetola ho tloha ho 50 ho isa ho 100 kapa 0 ho eketsa phapang bakeng sa setšoantšo se hlakileng. 1. Haeba setšoantšo se le lefifi haholo ho bona lintlha hantle, fetola ho tloha ho 50 ho isa ho 100 bakeng sa setšoantšo se hlakileng. 2. Haeba setšoantšo se le sesoeu haholo ho bona lintlha hantle, fetola ho tloha ho 50 ho isa ho 0 bakeng sa setšoantšo se hlakileng.
	'Mala oa Papali	0-20	'Mala oa Papali o tla fana ka boemo ba 0-20 bakeng sa ho fetola saturation ho fumana setšoantšo se betere.
	Adaptive-Sync/ AMD FreeSync (E fumaneha bakeng sa mefuta e khethiloeng)	E felile / E felile	Tlosa kapa Numella Adaptive-Sync/AMD FreeSync Premium.
	Ho khanna ho feta tekano	E fokola/Bohareng/ E matla/E tima	Fetola nako ea karabo.
	Phallo e tlaase ea ho kenya	E felile / E felile	Koala foreime buffer ho fokotsa nako ea ho kenya
	QuickSwitch LED	E felile / E felile	Thibela kapa Numella QuickSwitch LED
	Sebopeho sa foreimi	Ho tima / Ho le letona-Holimo / Ka ho le letona (le-fatshe) / Left-down / Left-up	Hlahisa maqhubu a V hukung e khethiloeng (Sebopeho sa counter ea Frame se sebetsa feela ka karete ea litšoantšo ea AMD.)

1. Hlokomela: Ha "HDR Mode" tlas'a "Image Setup" e setiloe ho se tingoe, "Game Mode", "Shadow Control" le "Game Color" li ke ke tsa fetoloa.
2. Ha “HDR” tlas’a “Image Setup” e setetsoe hore e se ke ea tima, “Game Mode”, “Shadow Control”, “Game Color”, “MBR” le “Boost” tlas’a “Overdrive” e ke ke ea lokisoa kapa ea khethoa.

Leseli

	Bapisa	0-100	Phapang ho tsoa ho Digital-register.
	Khanya	0-100	Phetoho ea Backlight
	Mokhoa oa Eco	Standard	Mokhoa o tloaelehileng
		Mongolo	Mokgwa wa mongolo
		Marang-rang	Mokhoa oa inthanete
		Papali	Mokhoa oa Papali
		Movie	Mokhoa oa lifilimi
		Lipapali	Mokhoa oa Lipapali
		Ho bala	Mokhoa oa ho bala
	Gamma	Gamma1	Ikamahanya le Gamma 1
		Gamma2	Ikamahanya le Gamma 2
		Gamma3	Ikamahanya le Gamma 3
	DCR	E tima/E butswe	Disable/ Numella tekanyo ea phapang e matla

1. Hlokomela: Ha “HDR Mode” tlas’a “Image Setup” e setetsoe hore e se tingoe, “Contrast”, “Eco Mode” le “Gamma” e ke ke ea lokisoa.
2. Ha “HDR” e tlas’a “Image Setup” e setetsoe hore e se tingoe, lintho tsohle tse tlas’a “Luminance” li ke ke tsa fetoloa.

Tlhophiso ea Litšoantšo

	HDR	Off / DisplayHDR / HDR Setšoantšo / HDR Movie / HDR Papali	Beha HDR profile ho latela litlhoko tsa hau tsa tšebeliso. Tlhokomeliso: Ha litaba tsa HDR li fumanoa, khetho ea HDR e tla hlahisoa bakeng sa tokiso.
	Mokhoa oa HDR	Off / HDR Setšoantšo / HDR Movie / HDR Papali	E etselitsoe 'mala le phapang ea setšoantšo, e etsisang phello ea HDR. Hlokomela: Ha litaba tsa HDR li sa lemohuoe, khetho ea mofuta oa HDR e tla hlahisoa bakeng sa tokiso.

• Hlokomela: Ha HDR e fumanoa, khetho ea HDR e bontšoa bakeng sa ho lokisoa; ha HDR e sa fumanwe, kgetho ya HDR Mode e tla bontshwa bakeng sa tokiso.

Ho Hlophisa Mebala

	Mokhoa oa LowBlue	Off / Multimedia / Marang-rang / Ofisi / Ho bala		Fokotsa leqhubu la khanya e putsoa ka ho laola mocheso oa 'mala.
	Mobala Temp.	E futhumetse		Hopola Mocheso oa Mobala o Mofuthu ho tsoa ho EEPROM.
		Tloaelehileng		Hopola Mocheso o Tloaelehileng oa Mobala ho tloha EEPROM.
		Pholile		Hopola Mocheso oa Mobala o Pholile ho tsoa ho EEPROM.
		sRGB		Hopola Mocheso oa Mobala oa SRGB ho tsoa ho EEPROM.
		Mosebedisi	Khubedu	Red Gain ho tloha Digital-register
			Botala	Green Gain Digital-ingolisa.
			Boputsoa	Blue Gain ho tsoa ho Digital-register
	Mokhoa oa DCB	Ntlafatsa ka botlalo	hodima kapa ho tima	Tlosa kapa u lumelle mokhoa oa ho ntlafatsa ka botlalo
		Letlalo la Tlhaho	hodima kapa ho tima	Thibela kapa bulela Mokhoa oa Letlalo la Tlhaho
		Tšimo e Tala	hodima kapa ho tima	Thibela kapa Nolofatsa Mokhoa oa Sebaka sa Green
		Botala ba leholimo	hodima kapa ho tima	Thibela kapa Numella Mokhoa oa Sky-blue
		Fumana ka ho iketsa	hodima kapa ho tima	Tlosa kapa u lumelle mokhoa oa AutoDetect
	Pontšo ea DCB		hodima kapa ho tima	Tlosa kapa bulela Demo
	Khubedu		0-100	Phaello e khubelu ho tsoa ho Digital-register.
	Botala		0-100	Green fumana ho tswa ho Digital-register.
	Boputsoa		0-100	Phaello e putsoa ho tsoa ho Digital-register.

• Hlokomela: Ha “HDR Mode” kapa “HDR” tlas’a “Image Setup” e setetsoe hore e se tingoe, lintho tsohle tse tlas’a “Colour Setup” li ke ke tsa fetoloa.

Audio

	Bolumo	0-100	Fetola boemo ba molumo
	Molumo oa DTS	Papali / Rock / Classical / Live / Theatre / Off	Khetha mokhoa oa molumo oa DTS. Hlokomela: Ho ka nka metsotsoana e 2 ho fetola mekhoa.
	TruVolume HD	E felile / E felile	Thibela kapa Numella TruVolume HD.
	200Hz	0-100	Low frequency base audio, hape le maqhubu a molumo oa molumo oa molumo oa molumo.
	500Hz	0-100	Haholo-holo e sebelisoang ho hlahisa mantsoe (mohlala, ho bina, ho bala), ho matlafatsa botenya le matla a mantsoe.
	2.5KHz	0-100	Leqhubu lena le na le matla a matla a ho phunyeletsa 'me le ka ntlafatsoa ho ntlafatsa ho khanya le ho hlaka ha molumo.
	7KHz	0-100	Ntlafatsa ho hlaka ha mantsoe.
	10KHz	0-100	Sebaka se phahameng sa 'mino se amehang ka ho fetisisa ho ts'ebetso e phahameng ea molumo oa molumo.

Leseli FX

	Leseli FX	E theohile / Tlase / Mahareng / E matla	Khetha matla a Light FX.
	Mokhoa oa FX oa Leseli	Audio1 / Audio2 / Static / Dark Point Sweep / Gradient Shift / Spread Fill / Drip Tlatsa / Phatlalatsa Tlatsa / Ho Phefumoloha / Ho Fiela Point / Atometsa / Mookoli / Leqhubu la Metsi / Flashing / Demo	Khetha Mokhoa oa Leseli FX
	Mohlala	Bokhubelu / Botala / Boputsoa / Mookoli / Tlhaloso ea Mosebelisi	Khetha Light FX Pattern
	Kapele-pele R	0-100	Mosebelisi a ka fetola 'mala o ka pele oa Leseli FX, ha tlhophiso ea Mohlala e behiloe ho hlalosoa ke mosebelisi
	Kapele-pele G
	Ka pele B
	Ka morao R	0-100	Mosebelisi a ka fetola 'mala oa bokamorao ba Leseli FX, ha tlhophiso ea Mohlala e behiloe ho hlalosoa ke mosebelisi
	Background G
	Bokaholimo B

Eketsa

	Khetho ea ho kenya	AUTO/HDMI1/HDMI2/DP/ USB C	Kgetha Mohlodi wa Letshwao la Kena
	Logo Projector	Off/Low/Bohareng/Matla	Ke ts'ebetso ea logo ea projeke.
	Khubedu	0 ~ 100	Phaello e khubelu ho tsoa ho Digital-register.
	Botala	0 ~ 100	Green fumana ho tswa ho Digital-register.
	Boputsoa	0 ~ 100	Phaello e putsoa ho tsoa ho Digital-register.
	Nako ea nako	Lihora tse 0 ho isa ho tse 24	Khetha nako ea nako ea DC
	Karolelano ea setšoantšo	Bophara / 4:3 / 1:1 / 17″(4:3) / 19″(4:3) / 19″(5:4) / 19″W(16:10) / 21.5″W(16:9) / 22″W(16:10) / W (23:16) / 9 23.6″W(16:9) / 24″W(16:9) / 27”W(16:9)	Khetha tekanyo ea setšoantšo bakeng sa pontšo.
	DDC/CI	Ee kapa che	Bulela / Off DDC / CI Support
	Seta bocha	Ee kapa che	Seta menu bocha hore e be ea kamehla

Setup ea OSD

	Puo		Khetha puo ea OSD
	Khefutso	5-120	Fetola nako ea OSD
	Bokhoni ba DP	1.1/1.2/1.4	Ka kopo hlokomela hore ke DP1.2/DP1.4 feela e tšehetsang mosebetsi oa Adaptive-Sync/ AMD FreeSync Premium.
	H. Boemo	0-100	Fetola boemo bo otlolohileng ba OSD
	V. Boemo	0-100	Fetola boemo bo otlolohileng ba OSD
	Ponaletso	0-100	Fetola ponaletso ea OSD
	Khopotso ea Khefu	buletsoe /off	Tlosa khopotso haeba mosebelisi a lula a sebetsa nako e fetang hora e le 'ngoe
	USB	3.2Gen1 / 2.0 / Off	Koala tšebetso ea USB kapa khetha mofuta oa USB
	Khetho ea USB	Auto / USB C / USB holimo	Khetha tsela ea USB Uplink Data

• Hlokomela: Haeba litaba tsa video tsa DP li tšehetsa DP1.2/DP1.4, ka kopo khetha DP1.2/DP1.4 bakeng sa DP Capability; ho seng joalo, ka kopo khetha DP1.1

Letšoao la LED

Boemo	Mmala oa LED
Mokhoa o felletseng oa Matla	Bosoeu
Mokhoa oa ho tima	namunu

Tharollo ya mathata

Bothata & Potso	Litharollo Tse ka khonehang
Matla a LED ha a TSOE	Etsa bonnete ba hore konopo ea motlakase e BUTSE 'me Thapo ea Motlakase e hoketsoe ka nepo mohloling oa motlakase o theohileng fatše le sehlahlobi.
Ha ho litšoantšo skrineng	Na thapo ea motlakase e hokahane hantle? Lekola khokelo ea thapo ea motlakase le phepelo ea motlakase. Na thapo e hokahane hantle? (E hoketswe ka thapo ya D-SUB) Sheba kgokelo ya thapo ya D-SUB. (E hoketswe ka thapo ya HDMI) Sheba kgokelo ya thapo ya HDMI. (E hoketsoe ka thapo ea DP) Sheba khokahanyo ea thapo ea DP. *D-SUB/HDMI/DP input ha e fumanehe mofuteng o mong le o mong. Haeba motlakase o le teng, qala komporo ea hau pele ho bona skrineng sa pele (skrine sa ho kena) se ka bonoang. Haeba skrineng sa pele (skrine sa ho kena) se hlaha, qala komporo ka mokhoa o sebetsang (mokhoa o bolokehileng bakeng sa Windows 7/ 8/10) ebe u fetola makhetlo a karete ea video. (Sheba ho Setting ea Optimal Resolution) Haeba skrine ea pele (skrine sa ho kena) se sa hlahe, ikopanye le Setsi sa Litšebeletso kapa morekisi oa hau. A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng le khafetsa eo sebali se ka sebetsanang le eona hantle. Fetola boholo ba qeto le maqhubu ao sebali se ka sebetsanang le ona hantle. Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe.
Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting	Fetola phapang le taolo ea khanya. Tobetsa ho itokisa ka boyona. Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho kenya sebali ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka morao.
Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong	Tsamaisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole le mohlohlo kamoo ho ka khonehang. Sebelisa sekhahla se phahameng sa ho khatholla sebali sa hau se khonang ho se etsa qetong eo u e sebelisang.
Tlhokomelo e ntse e le maemong a sa sebetseng ”	The Computer Power Switch e lokela ho ba boemong ba ON. Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. LED e lokela ho bulela kapa TIMA ka mora ho tobetsa konopo ya CAPS LOCK.
Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE)	Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo.
Setšoantšo sa skrini ha se bohareng kapa boholo bo nepahetseng	Fetola Boemo ba H le Boemo ba V kapa o tobetse hot-key (AUTO).
Setšoantšo se na le mathata a mebala (bosoeu ha bo shebahale bo le tšoeu)	Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala.
Litšitiso tse tšekaletseng kapa tse emeng skrineng	Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa ho itokisa.

Tlhaloso

Tlhaloso e Akaretsang

Phanele	Lebitso la mohlala	AG274QXM
	Sistimi ea ho khanna	TFT Mmala oa LCD
	Viewkhona Sebopeho sa setšoantšo	68.5 cm e diagonane
	Sekhahla sa pixel	0.2331mm(H) x 0.2331mm(V)
	Mmala oa Pontšo	1.07B Mebala
Ba bang	Meeli ea scan	30~230kHz (HDMI, USB C) 30~255kHz (DP)
	Boholo ba scan ninete e holimo (Boholo)	596.736 limilimithara
	Lekhahla la scan ninemanga.com	48~144Hz (HDMI, USB C) 48~170Hz (DP)
	Boholo ba Skena se Otlolohileng(Boholo)	335.664 limilimithara
	Qeto e nepahetseng esale pele	2560 x 1440@60Hz
	Qeto e phahameng	2560 x 1440@144Hz (HDMI, USB C) 2560 x 1440@170Hz* (DP)
	Plug & Bapala	VESA DDC2B / CI
	Mohloli oa Matla	19.5Vdc, 16.9A
	Tšebeliso ea Matla	Tloaelehileng (khanya le phapang ea kamehla)		65W
		Max. (Khanya = 100, phapang =100)		≤250W
		Boemo ba standby		≤0.5W
Litšobotsi Tsa 'Mele	Mofuta oa Sehokelo	HDMI/ DP/ USB/ USB C/ Earphone out/ Microphone e kene
	Mofuta oa Cable ea Letšoao	Detachable
Tikoloho	Mocheso	Ho sebetsa	0°~ 40°
		E sa sebetseng	-25°~ 55°
	Mongobo	Ho sebetsa	10% ~ 85% (ha e fokotsehe)
		E sa sebetseng	5% ~ 93% (ha e fokotsehe)
	Bophahamo	Ho sebetsa	0~ 5000 m (0~ 16404ft)
		E sa sebetseng	0~ 12192m (0~ 40000ft)

• Overclocking e fihlellwa ha qeto e le 2560×1440@170Hz. Haeba phoso leha e le efe ea pontšo e etsahala nakong ea overclocking, ka kopo fetola sekhahla sa ho khatholla ho 165Hz.

Seta pele Mekhoa ea Pontšo

TS'ELISO	TSIETSO	TS'ELISO FREQUENCY(kHz)	MOEKETSI FREQUENCY(Hz)
VGA	640×480@60Hz	31.469	59.94
VGA	640×480@67Hz	35	66.667
VGA	640×480@72Hz	37.861	72.809
VGA	640×480@75Hz	37.5	75
VGA	640×480@100Hz	51.08	99.769
VGA	640×480@120Hz	61.91	119.518
DOS MOKHOA	720×400@70Hz	31.469	70.087
DOS MOKHOA	720×480@60Hz	29.855	59.710
SD	720×576@50Hz	31.25	50
SVGA	800×600@56Hz	35.156	56.25
SVGA	800×600@60Hz	37.879	60.317
SVGA	800×600@72Hz	48.077	72.188
SVGA	800×600@75Hz	46.875	75
SVGA	800×600@100Hz	63.684	99.662
SVGA	800×600@120Hz	76.302	119.97
SVGA	832×624@75Hz	49.725	74.551
Katoloso ea XGA	1024×768@60Hz	48.363	60.004
Katoloso ea XGA	1024×768@70Hz	56.476	70.069
Katoloso ea XGA	1024×768@75Hz	60.023	75.029
Katoloso ea XGA	1024×768@100Hz	81.577	99.972
Katoloso ea XGA	1024×768@120Hz	97.551	119.989
SXGA	1280×1024@60Hz	63.981	60.02
SXGA	1280×1024@75Hz	79.975	75.025
HD e felletseng	1920×1080@60Hz	67.5	60
HD e felletseng	1920×1080@120Hz	135	120
QHD	2560×1440@60Hz	88.787	59.951
QHD	2560×1440@120Hz	182.996	119.998
QHD	2560×1440@144Hz	222.056	143.912
QHD (bakeng sa DP)	2560×1440@165Hz	242.551	165
QHD (bakeng sa DP)	2560×1440@170Hz	249.901	170.001

Likabelo tsa Pin

19-Pin Mmala Pontšo ea Pontšo ea Pontšo

Pin No.	Lebitso la Letshwao	Pin No.	Lebitso la Letshwao	Pin No.	Lebitso la Letshwao
1.	Lintlha tsa TMDS 2+	9.	Lintlha tsa TMDS 0-	17.	Lebala la DDC / CEC
2.	TMDS Data 2 Sireletso	10.	Oache ea TMDS +	18.	+ 5V Matla
3.	Lintlha tsa TMDS 2-	11.	Theko ea TMDS Clock	19.	Hot polaka lemoha
4.	Lintlha tsa TMDS 1+	12.	Nako ea TMDS-
5.	Lintlha tsa TMDS 1Shield	13.	CEC
6.	Lintlha tsa TMDS 1-	14.	E bolokiloe (NC ho sesebelisoa)
7.	Lintlha tsa TMDS 0+	15.	SCL
8.	TMDS Data 0 Sireletso	16.	SDA

20-Pin Mmala Pontšo ea Pontšo ea Pontšo

Pin No.	Lebitso la Letshwao	Pin No.	Lebitso la Letshwao
1	ML_Lane 3 (n)	11	GND
2	GND	12	ML_Lane 0 (leq)
3	ML_Lane 3 (leq)	13	TIISETSO 1
4	ML_Lane 2 (n)	14	TIISETSO 2
5	GND	15	AUX_CH (leq)
6	ML_Lane 2 (leq)	16	GND
7	ML_Lane 1 (n)	17	AUX_CH (n)
8	GND	18	Hot polaka lemoha
9	ML_Lane 1 (leq)	19	Khutlisetsa DP_PWR
10	ML_Lane 0 (n)	20	EA-DP_PWR

Hokela le ho Bapala

Plug & Play DDC2B Feature

• Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD.
• E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, 'me, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
• DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
• Bakeng sa litokelo tsa DTS, bona http://patents.dts.com. E entsoe ka laesense ho tsoa ho DTS Licensing Limited.
• DTS, Letshwao, & DTS le Letshwao mmoho ke matshwao a kgwebo a ngodisitsweng, mme DTS Sound ke letshwao la kgwebo la DTS, Inc. © DTS, Inc. All Rights Reserved.
• www.aoc.com
• 2021 AOC.Litokelo tsohle li sirelelitsoe

LBH

• P: A na nka sebelisa adaptara e fapaneng ea matla ka mochini oe?
  • A: Ho khothalletsoa ho sebelisa adaptara ea matla e fanoeng ho netefatsa ts'ebetso e bolokehileng le e nepahetseng ea sebali.
• P: Ke lokela ho etsa eng haeba mochine o sekamela ho feta -5 degrees ho ea tlase?
  • A: Ho thibela tšenyo e ka bang teng hore e se ke ea koaheloa tlas'a tiisetso, etsa bonnete ba hore sehlahlobi ha se sekame ho feta moeli o boletsoeng.

Litokomane / Lisebelisoa

Setšoantšo sa AOC AG274QXM LCD [pdf] Bukana ea Mosebelisi Tlhaloso: AG274QXM LCD Monitor, AG274QXM, LCD Monitor, Monitor

Litšupiso

• Bukana ea Mosebelisi