Tlhaloso: AOC AG273QX LCD Monitor
Polokeho
Likopano tsa Naha
Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.
Lintlha, Litemoso, le Litemoso
Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang:
- ELA HLOKO: TLHOKOMELISO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
- Tlhokomeliso: Tlhokomeliso e supa tšenyo e ka bang teng ho hardware kapa tahlehelo ea data mme e u joetsa hore na u ka qoba bothata joang.
- TLHOKOMELISO: TLHOKOMELISO e bontša monyetla oa ho tsoa kotsi 'meleng, 'me e u bolella mokhoa oa ho qoba bothata.Litemoso tse ling li ka hlaha ka mekhoa e fapaneng' me li ka 'na tsa se ke tsa tsamaea le letšoao. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
Matla
Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
- Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
- Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
- Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
- Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
- Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
Ho kenya
- Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
- Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
- U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
- Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
- Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.
- Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
E kentsoe ka stand
Ho hloekisa
- Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla se tla thibela khabinete ea lihlahisoa.
- Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
- Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
Tse ding
- Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
- Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
- Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
- U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.
Tlhophiso
Tse ka Hare ho Lebokose
Ha se likhoele tsohle tsa mats'oao (lithapo tsa DP, HDMI, USB le Micphone) tse tla fanoa bakeng sa linaha le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.
Seta Stand & Base
Ka kopo, hlophisa kapa u tlose metheo ho latela mehato e ka tlase.
Tlhophiso:
Tlosa:
Ho fetola leihlo
Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea ka seo u se ratang.
Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.
O khona ho fetola li-monitor ka tsela e latelang:
HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD.
Ho hokela Mohlahlobi
Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:
- Microphone e kene
- Earphone (E kopantsoe le Microphone)
- USB3.2 Gen1 e tlase + ho tjhaja ka potlako(BC1.2)
- USB3.2 Gen1 tlase ho noka
- USB3.2 Gen1 holimo
- AC e kenella
- HDMI
- DP
- Microphone ha e sebetse (Hokela ho PC)
- Quick Switch port
Hokela ho PC
- Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
- Koala komporo ea hau 'me u lokolle thapo ea motlakase.
- Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
- Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
- Bulela komporo ea hau 'me u bontshe.
- sesupo sa hau se bonts'a setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata. Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.
Mosebetsi oa Adaptive-Sync
- Mosebetsi oa Adaptive-Sync o sebetsa le DP / HDMI
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
- Letoto la RadeonTM RX Vega
- Letoto la RadeonTM RX 500
- Letoto la RadeonTM RX 400
- RadeonTM R9/R7 300 letoto (ntle le R9 370/X)
- RadeonTM Pro Duo (khatiso ea 2016)
- RadeonTM R9 Nano
- Letoto la RadeonTM R9 Fury
- RadeonTM R9/R7 200 letoto (ntle le R9 270/X, R9 280/X)
HDR
E lumellana le matshwao a ho kenya ka sebopeho sa HDR10.
Pontsho e ka nna ya kenya tshebetsong tshebetso ya HDR ka bo yona ha sebapala le dikateng di tsamaellana. Ka kopo, ikopanye le moetsi oa sesebelisoa le mofani oa litaba bakeng sa tlhahisoleseling mabapi le tšebelisano ea sesebelisoa sa hau le litaba. Ka kopo, khetha "OFF" bakeng sa ts'ebetso ea HDR ha o sa hloke ts'ebetso ea othomathiki.
Hlokomela
- Ha ho na tlhophiso e khethehileng e hlokahalang bakeng sa sebopeho sa DisplayPort/HDMI mefuteng ea WIN10 e tlase (ea khale) ho feta V1703.
- Ke sebopeho sa HDMI feela se fumanehang mme sebopeho sa DisplayPort se ke ke sa sebetsa ho mofuta oa WIN10 V1703.
- 3840×2160 @50Hz /60Hz ha se tlhahiso e sebelisoang sesebelisoa sa PC bakeng sa sebapali sa UHD feela kapa Xbox-ones / PS4-Pro.
- Qeto ea ponts'o e behiloe ho 3840 * 2160, 'me HDR e setiloe esale pele ho ON. Tlas'a maemo ana, skrini se ka 'na sa fifala hanyane, ho bontšang hore HDR e kentsoe tšebetsong.
- Kamora ho kenya kopo, phello e ntle ka ho fetisisa ea HDR e ka finyelloa ha qeto e fetoloa ho 3840 * 2160 (haeba e le teng).
Ho fetola
Li-hotkeys
- Mohlodi/Hodimo
- Dial Point/Down
- Mokhoa oa Papali/Ka ho le letšehali
- Leseli FX / Ho le letona
- Matla/ Menu/Kena
Matla / Menu / Enter
Tobetsa konopo ea Matla ho bulela mochine.
Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho. Tobetsa metsotsoana e ka bang 2 ho tima sehlahlo.
Dial Point/Down
Ha ho se OSD, tobetsa konopo ea Dial Point ho bontša / ho pata Dial Point.
Mokhoa oa Papali/Ka ho le letšehali
Ha ho se OSD, tobetsa "Left" key to open game mode function, then press "Left" or "Right" key to choose game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) based on the mefuta e fapaneng ea papali.
Leseli FX / Ka ho le letona
Ha OSD e le sieo, tobetsa konopo ea "Right" ho sebetsa Light FX.
Mohlodi/Hodimo
Ha OSD e koetsoe, tobetsa konopo ea Mohloli / Auto / Up e tla ba Mohloli oa hot hot mosebetsi.
Quick Switch
Ha OSD e le sieo, tobetsa konopo ea ◄ ho bula tšebetso ea mofuta oa papali, ebe u tobetsa ◄ kapa ► konopo ho khetha mofuta oa papali (FPS, RTS, Racing, Gamer 1, Gamer 2 kapa Gamer 3) ho latela mefuta e fapaneng ea papali.
Ha OSD e le sieo, tobetsa konopo ea "Right" ho sebetsa Light FX. Lenane/Ho lokile:
Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho.
Ha OSD e koetsoe, tobetsa ▲ konopo e tla ba Mohloli oa hot key tshebetso.
Ha ho se OSD, tobetsa konopo ea Dial Point ho bontša / ho pata Dial Point.
- Tobetsa konopo ea 1 ho khetha mokhoa oa Gamer 1
- Tobetsa konopo ea 2 ho khetha mokhoa oa Gamer 2
- Tobetsa konopo ea 3 ho khetha mokhoa oa Gamer 3
Tobetsa ho khutlela khethong e fetileng.
- Kena : Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
- Tsamaisa : Sebelisa konopo ea Leqele / Holimo / Tlase ho tsamaisa khetho ea OSD
- Tsoa : Sebelisa konopo ea Right ho tsoa OSD
- Kena : Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
- Tsamaisa : Sebelisa konopo ea Right / Up / Down ho tsamaisa khetho ea OSD
- Tsoa : Sebelisa konopo ea Left ho tsoa OSD
- Kena : Sebelisa konopo ea Enter ho kenya boemo bo latelang ba OSD
- Tsamaisa : Sebelisa konopo ea Holimo / Tlase ho tsamaisa khetho ea OSD
- Tsoa : Sebelisa konopo ea Left ho tsoa OSD
Sutha : Sebelisa Senotlolo sa Leqele / Le letona / Holimo / Tlase ho tsamaisa khetho ea OSD
- Tsoa : Sebelisa konopo ea Left ho tsoa OSD ho ea boemong bo fetileng ba OSD
- Kena : Sebelisa konopo e nepahetseng ho kenya boemo bo latelang ba OSD
- Khetha : Sebelisa konopo ea Up / Down ho tsamaisa khetho ea OSD
- Kena : Sebelisa konopo ea Enter ho sebelisa maemo a OSD le ho khutlela boemong bo fetileng ba OSD
- Khetha : Sebelisa konopo ea Down ho lokisa maemo a OSD
Khetha : Sebelisa konopo ea Up / Down ho fetola maemo a OSD
- Kena : Sebelisa konopo ea Enter ho tsoa ho OSD ho ea boemong bo fetileng ba OSD
- Khetha : Sebelisa konopo ea Leqele / Le letona ho fetola maemo a OSD
Litlhophiso tsa OSD
Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
- Tobetsa konopo ea MENU ho kenya fensetere ea OSD.
- Latela Key Guide ho tsamaisa kapa ho khetha (fetola) li-setting tsa OSD
- Mosebetsi oa OSD Lock / Notlolla: Ho notlela kapa ho notlolla OSD, tobetsa o hatelle konopo ea Down-ha bakeng sa 10s ha ts'ebetso ea OSD e sa sebetse.
Lintlha:
- Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe hore e lokisoe.
- Mekhoa ea ECO (ntle le mokhoa o tloaelehileng), DCR le DCB mode , bakeng sa tsena tse tharo li bolela hore ho ka ba le naha e le 'ngoe feela.
Litlhophiso tsa Lipapali
|
|
Mokhoa oa Papali |
FPS | Bakeng sa ho bapala lipapali tsa FPS (Lithunya tsa Motho oa Pele). Ntlafatsa
lintlha tsa boemo bo botšo ba sehlooho se lefifi. |
| RTS | Bakeng sa ho bapala RTS (Real Time Strategy). E ntlafatsa setšoantšo
boleng. |
||
| Peisong | Bakeng sa ho bapala lipapali tsa mabelo, E fana ka nako ea karabo e potlakileng
le ho tlala mmala o phahameng. |
||
| Sebapali sa 1 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 1. | ||
| Sebapali sa 2 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 2. | ||
| Sebapali sa 3 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 3. | ||
| tima | Ha ho ntlafatso ka papali ea setšoantšo sa Smart | ||
|
Taolo ea Moriti |
0-100 |
Shadow Control Default ke 50, joale mosebelisi oa ho qetela a ka ikamahanya le maemo
ho tloha ho 50 ho isa ho 100 kapa 0 ho eketsa phapang bakeng sa setšoantšo se hlakileng. 1. Haeba setšoantšo se le lefifi haholo hoo se ke keng sa bonoa ka botlalo, fetola ho tloha ho 50 ho isa ho 100 bakeng sa setšoantšo se hlakileng. 2. Haeba setšoantšo se le sesoeu haholo hore se ka bonoa ka botlalo, ho fetola ho tloha ho 50 ho isa ho 0 bakeng sa setšoantšo se hlakileng |
|
| 'Mala oa Papali | 0-20 | 'Mala oa Papali o tla fana ka boemo ba 0-20 bakeng sa ho fetola saturation ho fumana setšoantšo se betere. | |
| MBR | 0-20 | Fetola Phokotso ea Phallo ea Motion. | |
| Adaptive-Sync | E felile / E felile | Thibela kapa Numella Adaptive-Sync. | |
| Ho khanna ho feta tekano | Bofokoli/Bohareng/ E matla/matlafatsa/Ho tima | Fetola nako ea karabo. | |
| Phallo e tlaase ea ho kenya | E felile / E felile | Koala foreime buffer ho fokotsa nako ea ho kenya | |
| QuickSwitch LED | E felile / E felile | Thibela kapa Numella QuickSwitch LED | |
|
Sebopeho sa foreimi |
Ho tima / Ho le letona-Holimo /
Right-Down / Left- Down / Left-Up |
Hlahisa maqhubu a V hukung e khethiloeng
(Sebopeho sa counter ea Frame se sebetsa feela ka karete ea litšoantšo ea AMD.) |
Hlokomela:
- Ts'ebetso ea MBR le Overdrive Boost li fumaneha habonolo ha Adaptive-Sync e koetsoe 'me maqhubu a emeng a fihla ho 75Hz.
- Khanya ea skrine e tla fokotseha ha u lokisa MBR kapa Over driver setting ho Boost.
- Ha HDR e setetsoe ho "Auto" tlas'a "Litlhophiso tsa Litšoantšo" 'me mohloli oa ho kenya o na le litaba tsa HDR, "Game Mode", "Shadow Control", "Game Color", "MBR" lintho li ke ke tsa fetoloa tlas'a "Game Settings". "Boost" tlasa "Overdrive" ha e fumanehe.
Leseli
|
|
Bapisa | 0-100 | Phapang ho tsoa ho Digital-register. |
| Khanya | 0-100 | Phetoho ea Backlight | |
|
Mokhoa oa Eco |
Standard | Mokhoa o tloaelehileng | |
| Mongolo | Mokgwa wa mongolo | ||
| Marang-rang | Mokhoa oa inthanete | ||
| Papali | Mokhoa oa Papali | ||
| Movie | Mokhoa oa lifilimi | ||
| Lipapali | Mokhoa oa Lipapali | ||
|
Gamma |
Gamma1 | Ikamahanya le Gamma 1 | |
| Gamma2 | Ikamahanya le Gamma 2 | ||
| Gamma3 | Ikamahanya le Gamma 3 | ||
| DCR | E tima/E butswe | Disable/ Numella tekanyo ea phapang e matla |
Hlokomela:
Ha litlhophiso tsa HDR tlas'a "Litlhophiso tsa Litšoantšo" li setiloe ho "Auto" 'me mohloli oa ho kenya o na le litaba tsa HDR, lintho tsohle ntle le
"ECO Mode" ha e fetolehe tlas'a "Luminance". "ECO Mode" e tla fetoleloa ho HDR/HDR Picture/HDR Movie/
Papali ea HDR.
Tlhophiso ea Litšoantšo
|
|
HDR |
E tima / DisplayHDR
/ Setšoantšo sa HDR / HDR Movie / HDR Papali |
Tlosa kapa u lumelle HDR |
|
Phello ea HDR |
Off / Setšoantšo sa HDR
/ HDR Movie / HDR Papali |
Thibela kapa Nolofatsa Phello ea HDR |
Hlokomela:
Ha HDR e fumanoa, khetho ea HDR e bontšoa bakeng sa ho lokisoa; ha HDR e sa fumanwe, kgetho ya HDR Mode e tla bontshwa bakeng sa tokiso.
Mmala Tlhophiso
|
|
Mokhoa oa LowBlue |
Koala / Multimedia
/ Marang-rang / Ofisi / Ho bala |
Fokotsa leqhubu la khanya e putsoa ka ho laola mocheso oa 'mala. | |
|
Mobala Temp. |
E futhumetse | Hopola Mocheso oa Mobala o Mofuthu ho tsoa ho EEPROM. | ||
| Tloaelehileng | Hopola Mocheso o Tloaelehileng oa Mobala ho tloha
EEPROM. |
|||
| Pholile | Hopola Mocheso oa Mobala o Pholile ho tsoa ho EEPROM. | |||
| sRGB | Hopola Mocheso oa Mobala oa SRGB ho tsoa ho EEPROM. | |||
|
Mosebedisi |
Khubedu | Red Gain ho tloha Digital-register | ||
| Botala | Green Gain Digital-ingolisa. | |||
| Boputsoa | Blue Gain ho tsoa ho Digital-register | |||
|
Mokhoa oa DCB |
Ntlafatsa ka botlalo | hodima kapa ho tima | Tlosa kapa u lumelle mokhoa oa ho ntlafatsa ka botlalo | |
| Letlalo la Tlhaho | hodima kapa ho tima | Thibela kapa bulela Mokhoa oa Letlalo la Tlhaho | ||
| Tšimo e Tala | hodima kapa ho tima | Thibela kapa Nolofatsa Mokhoa oa Sebaka sa Green | ||
| Botala ba leholimo | hodima kapa ho tima | Thibela kapa Numella Mokhoa oa Sky-blue | ||
| Fumana ka ho iketsa | hodima kapa ho tima | Tlosa kapa u lumelle mokhoa oa AutoDetect | ||
| Pontšo ea DCB | hodima kapa ho tima | Tlosa kapa bulela Demo |
Hlokomela:
Ha litlhophiso tsa HDR tlas'a "Litlhophiso tsa Litšoantšo" li setiloe ho "Auto" 'me mohloli oa ho kenya o na le litaba tsa HDR, lintho tsohle tse tlas'a "Setapo sa Mebala" li ke ke tsa fetoloa.
Audio
|
|
Bolumo | 0-100 | Fetola boemo ba molumo |
|
Molumo oa DTS |
Papali / Rock / Classical / Live /
Theatre / Off |
Khetha mokhoa oa molumo oa DTS. Hlokomela: Ho ka nka metsotsoana e 2 ho fetola mekhoa. |
|
| TruVolume HD | E felile / E felile | Thibela kapa Numella TruVolume HD. | |
| 200Hz | 0-100 | Low frequency base audio, hape le maqhubu a molumo oa molumo oa molumo oa molumo. | |
| 500Hz | 0-100 | Haholo-holo e sebedisoang ho hlahisa mantswe (mohlala. ho bina, ho bala), Matlafatsa botenya le matla a mantswe. | |
| 2.5KHz | 0-100 | Leqhubu lena le na le matla a matla a ho phunyeletsa 'me le ka ntlafatsoa ho ntlafatsa ho khanya le ho hlaka ha molumo. | |
| 7KHz | 0-100 | Ntlafatsa ho hlaka ha mantsoe. | |
| 10KHz | 0-100 | Sebaka se phahameng sa 'mino se amehang haholo ho molumo o phahameng oa molumo. |
Leseli FX
|
|
Leseli FX | E theohile / Tlase / Mahareng / E matla | Khetha matla a Light FX. |
|
Mokhoa oa FX oa Leseli |
Audio/Static/Simple Shift/Gradient Shift/Habonolo Ho Tlatsa/1 Way Ho Tlatsa/2 Way Filling/Breathing/Motion Point/Atome/Discolor/Wave/Metsi/Flashing/Demo |
Khetha Mokhoa oa Leseli FX |
|
| Mohlala | Bokhubelu / Botala / Boputsoa / Mosebelisi
Hlalosa |
Khetha Light FX Pattern | |
| Kapele-pele R |
0-100 |
Mosebelisi a ka fetola 'mala o ka pele oa Leseli FX, neng Litlhophiso tsa mohlala ho hlalosa mosebelisi |
|
| Kapele-pele G | |||
| Ka pele B | |||
| Ka morao R |
0-100 |
Mosebelisi a ka fetola 'mala oa bokamorao ba Leseli FX, neng Litlhophiso tsa mohlala ho hlalosa mosebelisi |
|
| Background G | |||
| Bokaholimo B |
Eketsa
|
|
Khetho ea ho kenya |
AUTO/HDMI1/HDMI2/DP1/ DP2 |
Kgetha Mohlodi wa Letshwao la Kena |
| Nako ea nako | Lihora tse 0 ho isa ho tse 24 | Khetha nako ea nako ea DC | |
|
Karolelano ea setšoantšo |
Bophara / 4:3 / 1:1 / 17″(4:3)
/ 19″(4:3) / 19″(5:4) / 19″W(16:10) / 21.5″W(16:9) / 22″W(16:10) / 23″W(16:9) / 23.6″W(16:9) / 24″W(16:9) |
Khetha tekanyo ea setšoantšo bakeng sa pontšo. |
|
| DDC/CI | Ee kapa che | Bulela / Off DDC / CI Support | |
| Seta bocha | Ee kapa che | Seta menu bocha hore e be ea kamehla |
OSD Tlhophiso
|
|
Puo | Khetha puo ea OSD | |
| Khefutso | 5-120 | Fetola nako ea OSD | |
| Bokhoni ba DP | 1.1/1.2/1.4 | Ka kopo hlokomela hore ke DP1.2/DP1.4 feela e tšehetsang mosebetsi oa sync oa mahala | |
| H. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| V. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| Ponaletso | 0-100 | Fetola ponaletso ea OSD | |
| Khopotso ea Khefu | buletsoe /off | Roba khopotso haeba mosebelisi a tsoela pele ho sebetsa nako e fetang 1hrs |
Hlokomela:
Haeba litaba tsa video tsa DP li tšehetsa DP1.2/DP1.4, ka kopo khetha DP1.2/DP1.4 bakeng sa DP Capability; ho seng joalo, ka kopo khetha
DP1.1
Letšoao la LED
| Boemo | Mmala oa LED |
| Mokhoa o felletseng oa Matla | Khubedu |
| Mokhoa oa ho tima | namunu |
Tharollo ya mathata
| Bothata & Potso | Litharollo Tse ka khonehang |
| Matla a LED ha a TSOE | Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo. |
|
Ha ho litšoantšo skrineng |
Na thapo ea motlakase e hokahane hantle?
Lekola khokelo ea thapo ea motlakase le phepelo ea motlakase. Na thapo e hokahane hantle? (E hoketswe ka thapo ya D-SUB) Sheba kgokelo ya thapo ya D-SUB. (E hoketswe ka thapo ya HDMI) Sheba kgokelo ya thapo ya HDMI. (E hoketsoe ka thapo ea DP) Sheba khokahanyo ea thapo ea DP. *D-SUB/HDMI/DP input ha e fumanehe mofuteng o mong le o mong. Haeba motlakase o le teng, qala komporo ea hau pele ho bona skrineng sa pele (skrine sa ho kena) se ka bonoang. Haeba skrineng sa pele (skrine sa ho kena) se hlaha, qala komporo ka mokhoa o sebetsang (mokhoa o bolokehileng bakeng sa Windows 7/ 8/10) ebe u fetola makhetlo a karete ea video. (Sheba ho Setting ea Optimal Resolution) Haeba skrine ea pele (skrine sa ho kena) se sa hlahe, ikopanye le Setsi sa Litšebeletso kapa morekisi oa hau. A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng le khafetsa eo sebali se ka sebetsanang le eona hantle. Fetola boholo ba qeto le maqhubu ao sebali se ka sebetsanang le ona hantle. Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe. |
|
Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting |
Fetola phapang le taolo ea khanya. Tobetsa ho itokisa ka boyona.
Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho kenya sebali ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka morao. |
| Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong | Tsamaisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole le
hlokomela kamoo ho ka khonehang. Sebelisa sekhahla se phahameng sa ho khatholla sebali sa hau se khonang ho se etsa qetong eo u e sebelisang. |
|
Tlhokomelo e ntse e le maemong a sa sebetseng ” |
The Computer Power Switch e lokela ho ba boemong ba ON.
Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. LED e lokela ho bulela kapa TIMA ka mora ho tobetsa konopo ya CAPS LOCK. |
| Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE) | Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. |
| Setšoantšo sa skrini ha se bohareng kapa boholo bo nepahetseng |
Fetola Boemo ba H le Boemo ba V kapa o tobetse hot-key (AUTO). |
| Setšoantšo se na le mathata a mebala (bosoeu ha bo shebahale bo le tšoeu) | Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. |
|
Litšitiso tse tšekaletseng kapa tse emeng skrineng |
Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa ho itokisa. |
Tlhaloso
Tlhaloso e Akaretsang
|
Phanele |
Lebitso la mohlala | AG273QX | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 68.5 cm e diagonane | |||
| Sekhahla sa pixel | 0.2331mm(H) x 0.2331mm(V) | |||
| Video | Sesebelisoa sa HDMI le DP Interface | |||
| Arohane Sync. | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30~230kHz (HDMI)
30~250kHz (DP) |
||
| Boholo ba scan ninete e holimo (Boholo) | 596.736 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48~144Hz (HDMI)
48~165Hz (DP) |
|||
| Boholo ba Skena se Otlolohileng(Boholo) | 335.664 limilimithara | |||
| Qeto e nepahetseng esale pele | 2560 x 1440@60Hz | |||
| Qeto e phahameng | 2560 x 1440@144Hz (HDMI)
2560 x 1440@165Hz (DP) |
|||
| Plug & Bapala | VESA DDC2B / CI | |||
| Sesebelisoa sa ho kenya | HDMI/DP/Microphone In | |||
| Sehokedi sa Khumo | Earphone out / Microphone e tima | |||
| Mohloli oa Matla | 100-240V~, 1.5A, 50/60Hz | |||
|
Tšebeliso ea Matla |
Tloaelehileng (khanya le phapang ea kamehla) | 52W | ||
| Max. (Khanya = 100, phapang =100) | ≤120W | |||
| Ho boloka matla | ≤0.5W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | HDMI/ DP/ Earphone out/ Microphone In | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
Seta pele Mekhoa ea Pontšo
| TS'ELISO | TSIETSO | TS'ELISO
FREQUENCY(kHz) |
MOEKETSI
FREQUENCY(Hz) |
| VGA | 640×480@60Hz | 31.469 | 59.94 |
| VGA | 640×480@67Hz | 35 | 66.667 |
| VGA | 640×480@72Hz | 37.861 | 72.809 |
| VGA | 640×480@75Hz | 37.5 | 75 |
| VGA | 640×480@100Hz | 51.08 | 99.769 |
| VGA | 640×480@120Hz | 61.91 | 119.518 |
| DOS MOKHOA | 720×400@70Hz | 31.469 | 70.087 |
| DOS MOKHOA | 720×480@60Hz | 29.855 | 59.710 |
| SD | 720×576@50Hz | 31.25 | 50 |
| SVGA | 800×600@56Hz | 35.156 | 56.25 |
| SVGA | 800×600@60Hz | 37.879 | 60.317 |
| SVGA | 800×600@72Hz | 48.077 | 72.188 |
| SVGA | 800×600@75Hz | 46.875 | 75 |
| SVGA | 800×600@100Hz | 63.684 | 99.662 |
| SVGA | 800×600@120Hz | 76.302 | 119.97 |
| SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Katoloso ea XGA | 1024×768@60Hz | 48.363 | 60.004 |
| Katoloso ea XGA | 1024×768@70Hz | 56.476 | 70.069 |
| Katoloso ea XGA | 1024×768@75Hz | 60.023 | 75.029 |
| Katoloso ea XGA | 1024×768@100Hz | 81.577 | 99.972 |
| Katoloso ea XGA | 1024×768@120Hz | 97.551 | 119.989 |
| SXGA | 1280×1024@60Hz | 63.981 | 60.02 |
| SXGA | 1280×1024@75Hz | 79.975 | 75.025 |
| HD e felletseng | 1920×1080@60Hz | 67.5 | 60 |
| QHD | 2560×1440@60Hz | 88.787 | 59.951 |
| QHD | 2560×1440@120Hz | 182.817 | 119.880 |
| QHD | 2560×1440@144Hz | 222.056 | 143.912 |
| QHD (bakeng sa DP) | 2560×1440@165Hz | 241.995 | 164.623 |
Likabelo tsa Pin
19-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Lintlha tsa TMDS 2+ | 9. | Lintlha tsa TMDS 0- | 17. | Lebala la DDC / CEC |
| 2. | TMDS Data 2 Sireletso | 10. | Oache ea TMDS + | 18. | + 5V Matla |
| 3. | Lintlha tsa TMDS 2- | 11. | Theko ea TMDS Clock | 19. | Hot polaka lemoha |
| 4. | Lintlha tsa TMDS 1+ | 12. | Nako ea TMDS- | ||
| 5. | Lintlha tsa TMDS 1Shield | 13. | CEC | ||
| 6. | Lintlha tsa TMDS 1- | 14. | E bolokiloe (NC ho sesebelisoa) | ||
| 7. | Lintlha tsa TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Sireletso | 16. | SDA |
20 Pin Color Display Signal Cable
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (leq) |
| 3 | ML_Lane 3 (leq) | 13 | TIISETSO 1 |
| 4 | ML_Lane 2 (n) | 14 | TIISETSO 2 |
| 5 | GND | 15 | AUX_CH (leq) |
| 6 | ML_Lane 2 (leq) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Hot polaka lemoha |
| 9 | ML_Lane 1 (leq) | 19 | Khutlisetsa DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | EA-DP_PWR |
Hokela le ho Bapala
Plug & Play DDC2B Feature
Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
Bakeng sa litokelo tsa molao tsa DTS, bona http://patents.dts.com. E entsoe ka tlas'a laesense ho tsoa ho DTS Licensing Limited. DTS, Letshwao, & DTS le Letshwao mmoho ke matshwao a kgwebo a ngodisitsweng, mme DTS Sound ke letshwao la kgwebo la DTS, Inc. © DTS, Inc. All Rights Reserved.
Litokomane / Lisebelisoa
 |
Tlhaloso: AOC AG273QX LCD Monitor [pdf] Bukana ea Mosebelisi Tlhaloso: AG273QX LCD Monitor, AG273QX, LCD Monitor, Monitor |
