AOC 27G2SPU LCD Monitor
Polokeho
Likopano tsa Naha
Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.
Lintlha, Litemoso, le Litemoso
Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang:
HLOKOMELA: TLHOKOMELISO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
TLHOKOMELISO: TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho Hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata.
TLHOKOMELISO: TEMOSO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella kamoo u ka qobang bothata boo kateng. Litemoso tse ling li ka hlaha ka lifomate tse ling 'me li kanna tsa se felehetsoe ke aekhone. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
Matla
Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
- Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
- Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa
hlokomela ho tloha tshenyong ka lebaka la ho phahama ha matla. - Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
- Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
- Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
Ho kenya
- Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
- Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
- U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
- Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
- Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.
- Ho qoba tšenyo e ka bang teng, mohlalaampha phanele e ebola ho tloha bezel, etsa bonnete ba hore sebatli ha se sekame ho ea tlase ka likhato tse fetang -5. Haeba tekanyo ea -5-degree downward tilt angle e ka fetisoa, tšenyo ea leihlo e ke ke ea koaheloa tlas'a tiisetso.
- Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
Ho hloekisa
- Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla se tla thibela khabinete ea lihlahisoa.
- Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
- Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
Tse ding
- sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
- Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
- Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
- U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.
Tlhophiso
Tse ka Hare ho Lebokose
Ha se lithapo tsohle tsa mats'oao (DP, HDMI, VGA, Lithapo tsa Audio) tse tla fanoa bakeng sa linaha le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.
Seta Stand & Base
Ka kopo, hlophisa kapa u tlose metheo ho latela mehato e ka tlase.
Ho fetola ViewAngle
Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea ka seo u se ratang.
Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.
O khona ho fetola li-monitor ka tsela e latelang:
HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD.
TLHOKOMELISO:
- Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Ho hokela Mohlahlobi
Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:
- HDMI-2
- HDMI-1
- DP
- D-SUB
- Audio ka
- Earphone
- Matla
- USB-PC holimo holimo
- USB 3.2 Gen 1
- USB3.2Gen1+Ho tjhaja ka Potlako
- USB 3.2 Gen 1
- USB 3.2 Gen 1
Hokela ho PC
- Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
- Koala komporo ea hau 'me u lokolle thapo ea motlakase.
- Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
- Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
- Bulela komporo ea hau 'me u bontshe.
Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata.
Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.
Ho Hloma Lebota
Ho Lokisetsa ho Kenya Letsoho la Boikhethelo le Tlamang Lebota.
Monitor ena e ka hokelloa leboteng la letsoho leo u le rekang ka thoko. Tlosa motlakase pele ho ts'ebetso ena. Latela mehato ena:
- Tlosa setsi.
- Latela litaelo tsa moetsi ho kopanya lebota la letsoho le ntseng le hola.
- Beha letsoho la lebota ka morao ho sehlahlo. Hlophisa masoba a letsoho le masoba ka morao ho sehlahlo.
- Hokela lithapo hape. Sheba buka ea mosebedisi e tlileng le letsoho la boikhethelo la ho hloma lebota bakeng sa litaelo tsa ho le hokela leboteng.
E hlokometse: VESA mounting screw holes ha e fumanehe bakeng sa mefuta eohle, ka kopo ikopanye le morekisi kapa lefapha la molao la AOC.
* Moralo oa ponts'o o ka fapana le o bonts'itsoeng.
TLHOKOMELISO:
- Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Ts'ebetso ea Adaptive-Sync (E fumaneha bakeng sa mefuta e khethiloeng)
- Mosebetsi oa Adaptive-Sync o sebetsa le DP / HDMI
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
- Radeon ™ RX Vega letoto lena
- Radeon ™ RX 500 letoto lena
- Radeon ™ RX 400 letoto lena
- Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano letoto lena
- Letoto la Radeon™ R9 Fury
- Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)
Mosebetsi oa AMD FreeSync Premium (E fumaneha bakeng sa mefuta e khethiloeng)
- Mosebetsi oa AMD FreeSync Premium o sebetsa le DP/HDMI
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
- Radeon ™ RX Vega letoto lena
- Radeon ™ RX 500 letoto lena
- Radeon ™ RX 400 letoto lena
- Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano letoto lena
- Letoto la Radeon™ R9 Fury
- Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)
Mosebetsi oa G-SYNC (E fumaneha bakeng sa mefuta e khethiloeng)
- Mosebetsi oa G-SYNC o sebetsa le DP/HDMI
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
- Radeon ™ RX Vega letoto lena
- Radeon ™ RX 500 letoto lena
- Radeon ™ RX 400 letoto lena
- Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano letoto lena
- Letoto la Radeon™ R9 Fury
- Radeon ™ R9 / R7 200 letoto (R9 270 / X, R9 280 / X ntle le)
Ho fetola
Li-hotkeys
| 1 | Mohloli/Auto/Tsoa |
| 2 | Mokhoa oa papali/ |
| 3 | Sebaka sa ho daela/> |
| 4 | Menu/kena |
| 5 | Matla |
- Matla
Tobetsa konopo ea Matla ho bulela mochine. - Menu/kena
Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho. - Mokhoa oa papali/
Ha ho se na OSD, tobetsa "<" konopo ho bula mokhoa oa papali, ebe o tobetsa "<" kapa ">" ho khetha mokhoa oa papali (FPS,
RTS, Racing, Gamer 1, Gamer 2 kapa Gamer 3) ho ipapisitsoe le mefuta e fapaneng ea papali. - Sebaka sa ho daela/>
Ha ho se OSD, tobetsa konopo ea Dial Point ho bontša / ho pata Dial Point. - Mohloli/Auto/Tsoa
Ha OSD e koetsoe, tobetsa konopo ea Source / Auto / Exit e tla ba Mohloli oa hot hot mosebetsi.
Ha OSD e koetsoe, tobetsa konopo ea Source/Auto/Exit khafetsa ka metsotsoana e 2 ho etsa auto configure (Feela mehlala e nang le D-Sub).
Litlhophiso tsa OSD
Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
- Tobetsa ea
ho kenya fensetere ea OSD. - Tobetsa
ho tsamaya hara ditshebetso. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo ho e kenya tshebetsong, tobetsa Le letshehadi kapa Le letona ho tsamaya hara ditshebetso tsa menu e nyane. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa ho e kenya tshebetsong. - Tobetsaho fetola di-setting tsa tshebetso e kgethilweng. Tobetsa
ho tsoa. Haeba u batla ho fetola ts'ebetso e 'ngoe, pheta mehato ea 2-3. - Mosebetsi oa Lock ea OSD: Ho notlela OSD, tobetsa o hatelle
ha lisebelisoa li tima ebe u tobetsa 
konopo ea matla ho bulela sebali. Ho notlolla OSD – tobetsa o hatelle ha lisebelisoa li tima ebe u tobetsa konopo ea matla ho bulela sebali.
Lintlha
- Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe.
- E 'ngoe ea mesebetsi e hlakileng ea pono, DCR, Colour Boost le Picture Boost e kentsoe tšebetsong; mesebetsi e meng e meraro e tingoa ka tsela e nepahetseng.
Leseli
Hlokomela:
Ha “HDR Mode” e setetsoe ho “no-tima”, lintho tse “Contrast”, “Gamma” li ke ke tsa lokisoa.
Tlhophiso ea Litšoantšo
Ho Hlophisa Mebala
Chete:
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho tsohle tse tlasa "Colour Setup" li ka se fetoloe.
Matlafatsa Litšoantšo
Hlokomela
Fetosa ho khanya, phapang, le boemo ba Frame e Khanyang hore e be betere viewka boiphihlelo.
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho tsohle tse tlasa "Picture Boost" li ke ke tsa fetoloa.
Setup ea OSD
Hlokomela:
Haeba litaba tsa video tsa DP li tšehetsa DP1.2, ka kopo khetha DP1.2 bakeng sa Bokhoni ba DP; ho seng joalo, ka kopo khetha DP1.1
Litlhophiso tsa Lipapali
Hlokomela
Mosebetsi oa MBR le Overdrive Boost li fumaneha feela ha Adaptive-Sync e koetsoe 'me maqhubu a emeng a fihla ho 75 Hz.
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho "Game Mode", "Shadow Control", "Game Colour", "Low Blue Mode" li ke ke tsa fetoloa.
Eketsa
Etsoa
Letšoao la LED
| Boemo | Mmala oa LED |
| Mokhoa o felletseng oa Matla | Bosoeu |
| Mokhoa oa ho tima | namunu |
Tharollo ya mathata
| Bothata & Potso | Litharollo Tse ka khonehang |
| Matla a LED ha a TSOE | Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo. |
|
Ha ho litšoantšo skrineng |
Na thapo ea motlakase e hokahane hantle?
|
| Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting |
|
| Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong |
|
| Monitor o ntse a sa sebetse- Mokhoa” |
|
| Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE) | Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. |
| Setšoantšo sa skrini ha se bohareng kapa boholo bo nepahetseng | Fetola Boemo ba H le Boemo ba V kapa o tobetse hot-key (AUTO). |
| Setšoantšo se na le mathata a mebala (bosoeu ha bo shebahale bo le tšoeu) | Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. |
| Litšitiso tse tšekaletseng kapa tse emeng skrineng | Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa ho itokisa. |
| Taolo & Tshebeletso | Ka kopo, sheba Tlhahisoleseding ea Melao le Ts'ebeletso e bukeng ea CD kapa www.aoc.com (ho fumana mofuta oo o o rekang naheng ea heno le ho fumana Taolo le Boitsebiso ba Litšebeletso leqepheng la Tšehetso.) |
Tlhaloso
Tlhaloso e Akaretsang
| Phanele | Lebitso la mohlala | 27G2SPU
27G2SPU/BK |
||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 68.6 cm e diagonane | |||
| Sekhahla sa pixel | 0.3114mm(H) x 0.3114mm(V) | |||
| Video | R, G, B Interface & HDMI lnterface & DP Interface | |||
| Arohane Sync. | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30k-160kHz(D-SUB/HDMI)
30k-200kHz(DP) |
||
| Boholo ba scan ninete e holimo (Boholo) | 597.888 limilimithara | |||
| Lekhahla la scan ninemanga.com |
|
|||
| Boholo ba Skena se Otlolohileng(Boholo) | 336.312 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng |
|
|||
| Plug & Bapala | VESA DDC2B / CI | |||
| Sesebelisoa sa ho kenya | HDMIx2/DP/VGA | |||
| Pontšo ea Pontšo ea Video | Analog: 0.7Vp-p (e tloaelehileng), 75 OHM, TMDS | |||
| Sehokedi sa Khumo | Earphone kantle | |||
| Mohloli oa Matla | 100-240V~, 50/60Hz,1.5A | |||
| Tšebeliso ea Matla | Tloaelehileng(khanya le phapang ea kamehla) | 28W | ||
| Max. (khanya = 100, phapang =100) | ≤ 75W | |||
| Boemo ba standby | ≤ 0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | VGA/HDMI/DP/Earphone out/Audio in/USB | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
| Tikoloho | Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
Seta pele Mekhoa ea Pontšo
| TS'ELISO | TSIETSO | KHAOLO EA HORIZONTAL (kHz) | LEKHETLO LA LERETICAL (Hz) |
| VGA | 640×480@60Hz | 31.469 | 59.94 |
| VGA | 640×480@67Hz | 35 | 66.667 |
| VGA | 640×480@72Hz | 37.861 | 72.809 |
| VGA | 640×480@75Hz | 37.5 | 75 |
| VGA | 640×480@100Hz | 51.08 | 99.769 |
| VGA | 640×480@120Hz | 61.91 | 119.518 |
| SD | 720×576@50Hz | 31.25 | 50 |
| SVGA | 800×600@56Hz | 35.156 | 56.25 |
| SVGA | 800×600@60Hz | 37.879 | 60.317 |
| SVGA | 800×600@72Hz | 48.077 | 72.188 |
| SVGA | 800×600@75Hz | 46.875 | 75 |
| SVGA | 800×600@100Hz | 62.76 | 99.778 |
| SVGA | 800×600@120Hz | 76.302 | 119.972 |
| Katoloso ea XGA | 1024×768@60Hz | 48.363 | 60.004 |
| Katoloso ea XGA | 1024×768@70Hz | 56.476 | 70.069 |
| Katoloso ea XGA | 1024×768@75Hz | 60.023 | 75.029 |
| Katoloso ea XGA | 1024×768@100Hz | 80.448 | 99.811 |
| Katoloso ea XGA | 1024×768@120Hz | 97.551 | 119.989 |
| SXGA | 1280×1024@60Hz | 63.981 | 60.02 |
| SXGA | 1280×1024@75Hz | 79.976 | 75.025 |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.887 |
| SXGA | 1280×1024@60Hz | 63.981 | 75.025 |
| SXGA | 1280×1024@75Hz | 37.071 | 49.827 |
| FHD | 1920×1080@60Hz | 67.5 | 60 |
| FHD(HDMI) | 1920×1080@100Hz | 113.221 | 99.93 |
| FHD(HDMI/DP) | 1920×1080@120Hz | 137.26 | 119.982 |
| FHD(HDMI/DP) | 1920×1080@144Hz | 158.113 | 144.001 |
| FHD(DP) | 1920×1080@165Hz | 183.154 | 165.003 |
| MEKHOA IBM | |||
| DOS | 640×350@70Hz | 31.469 | 70.087 |
| DOS | 720×400@70Hz | 31.469 | 70.087 |
| MAC MEKHOA | |||
| VGA | 640×480@67Hz | 35 | 66.667 |
| SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Katoloso ea XGA | 1024×768@75Hz | 60.241 | 74.927 |
Likabelo tsa Pin
19-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Lintlha tsa TMDS 2+ | 9. | Lintlha tsa TMDS 0- | 17. | Lebala la DDC / CEC |
| 2. | TMDS Data 2 Sireletso | 10. | Oache ea TMDS + | 18. | + 5V Matla |
| 3. | Lintlha tsa TMDS 2- | 11. | Theko ea TMDS Clock | 19. | Hot polaka lemoha |
| 4. | Lintlha tsa TMDS 1+ | 12. | Nako ea TMDS- | ||
| 5. | Lintlha tsa TMDS 1Shield | 13. | CEC | ||
| 6. | Lintlha tsa TMDS 1- | 14. | E bolokiloe (NC ho sesebelisoa) | ||
| 7. | Lintlha tsa TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Sireletso | 16. | SDA |
20-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (leq) |
| 3 | ML_Lane 3 (leq) | 13 | TIISETSO 1 |
| 4 | ML_Lane 2 (n) | 14 | TIISETSO 2 |
| 5 | GND | 15 | AUX_CH (leq) |
| 6 | ML_Lane 2 (leq) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Hot polaka lemoha |
| 9 | ML_Lane 1 (leq) | 19 | Khutlisetsa DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | EA-DP_PWR |
15-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | Video-Khubelu | 9 | +5V |
| 2 | Video-Botala | 10 | Fatše |
| 3 | Video-Putsoa | 11 | NC |
| 4 | NC | 12 | Lintlha tsa DDC-Serial |
| 5 | Fumana Cable | 13 | H-kgokagantswe |
| 6 | GND-R | 14 | V-sync |
| 7 | GND-G | 15 | Oache ea DDC-Serial |
| 8 | GND-B |
Hokela le ho Bapala
Plug & Play DDC2B Feature
Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
Litokomane / Lisebelisoa
 |
AOC 27G2SPU LCD Monitor [pdf] Bukana ea Mosebelisi 27G2SPU LCD Monitor, 27G2SPU, LCD Monitor, Monitor |