LCD hlokomela
Bukana ea Mosebelisi
24B2XD/24B2XDM
24B2XDA/24B2XDAM/27B2DA
www.aoc.com
©2020 AOC. Litokelo tsohle li sirelelitsoe.
Polokeho
Likopano tsa Naha
Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena.
Lintlha, Litemoso, le Litemoso
Tataisong ena kaofela, liboloko tsa mongolo li ka tsamaea le aekhone ebe li hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang:
HLOKOMELA: TLHOKOMELISO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo.
TLHOKOMELISO: TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho Hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata.
TLHOKOMELISO: TEMOSO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella kamoo u ka qobang bothata boo kateng. Litemoso tse ling li ka hlaha ka mekhoa e meng 'me li ka 'na tsa se tsamaee le letšoao. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
Matla
Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase.
Ho netefatsa ts'ebetso e khotsofatsang, sebelisa sebali feela ka likhomphutha tse thathamisitsoeng ke UL tse nang le lisebelisoa tse hlophisitsoeng tse nepahetseng tse tšoailoeng lipakeng tsa 100-240V AC, Min. 5A.
Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
E sebelisoa feela ka adaptara ea motlakase e hokeletsoeng.
Baetsi: TPV ELECTRONICS(FUJIAN) CO., LTD
Mohlala: ADPC1925EX(19VDC,1.31A)
Ho kenya
Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
U se ke ua beha karolo e ka pele ea sehlahisoa fatše.
Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit.
Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.
Ho qoba tšenyo e ka bang teng, mohlalaampha phanele e ebola ho tloha bezel, etsa bonnete ba hore sebatli ha se sekame ho ea tlase ka likhato tse fetang -5. Haeba tekanyo ea -5-degree downward tilt angle e ka fetisoa, tšenyo ea leihlo e ke ke ea koaheloa tlas'a tiisetso.
Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
Ho hloekisa
Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla se tla thibela khabinete ea lihlahisoa.
Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
Tse ding
Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
Netefatsa hore masoba a ho kenya moea ha a koaloe ke tafole kapa kharetene.
Se ke oa kenya leihlo la LCD maemong a thothomelang haholo kapa maemong a matla haholo nakong ea ts'ebetso.
U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang.
Lithapo tsa motlakase e tla ba ts'ireletso e amoheloang. Bakeng sa Jeremane, e tla ba H03VV-F, 3G, 0.75 mm2, kapa ho feta. Bakeng sa linaha tse ling, mefuta e loketseng e tla sebelisoa ka nepo.
Khatello e feteletseng ea molumo e tsoang li-earphone le li-headphones e ka baka tahlehelo ea kutlo. Ho feto-fetoha ha tekanyo ea ho lekana ho eketsa molumo oa li-earphone le li-headphonestage mme ka hona boemo ba khatello ea molumo.
Tlhophiso
Tse ka Hare ho Lebokose
Ha se lithapo tsohle tsa mats'oants'o tse tla fanoa bakeng sa linaha tsohle le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.
Seta Stand & Base
Ka kopo, hlophisa kapa u tlose metheo ho latela mehato e ka tlase.
Ho fetola ViewAngle
Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea ka seo u se ratang.
Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine.
O khona ho fetola li-monitor ka tsela e latelang:
HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD.
TLHOKOMELISO:
- Ho qoba tšenyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebono ha se sekame ho ea tlase ka likhato tse fetang -5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Ho hokela Mohlahlobi
Lihokelo tsa Cable Ka morao ho Monitor le Khomphutha:
| 1. HDMI | 4. Audio ka |
| 2. Tse peli | 5. Mohala oa tsebe |
| 3. Analog (Cable ea D-Sub 15-Pin VGA) | 6. Matla |
Hokela ho PC
- Hokela thapo ea motlakase ka morao ho ponts'o ka tieo.
- Koala komporo ea hau 'me u lokolle thapo ea motlakase.
- Hokela thapo ea pontšo ho sehokelo sa video se ka morao komporong ea hau.
- Hokela thapo ea motlakase ea komporo ea hau le skrineng ea hau sebakeng se haufi.
- Bulela komporo ea hau 'me u bontshe.
Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata.
Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela.
Ho Hloma Lebota
Ho Lokisetsa ho Kenya Letsoho la Boikhethelo le Tlamang Lebota.
Monitor ena e ka hokelloa leboteng la letsoho leo u le rekang ka thoko. Tlosa motlakase pele ho ts'ebetso ena.
Latela mehato ena:
- Tlosa setsi.
- Latela litaelo tsa moetsi ho kopanya lebota la letsoho le ntseng le hola.
- Beha letsoho la lebota ka morao ho sehlahlo. Hlophisa masoba a letsoho le masoba ka morao ho sehlahlo.
- Kenya li-screws tse 4 ka mekoting ebe u tiisa.
- Hokela lithapo hape. Sheba buka ea mosebedisi e tlileng le letsoho la boikhethelo la ho hloma lebota bakeng sa litaelo tsa ho le hokela leboteng.
Ela hloko: Li-screw masoba tsa VESA ha li fumanehe bakeng sa mefuta eohle, ka kopo ikopanye le morekisi kapa lefapha la semmuso la AOC.
* Moralo oa ponts'o o ka fapana le o bonts'itsoeng.
TLHOKOMELISO:
- Ho qoba ts'enyo e ka bang teng skrineng, joalo ka ho phunya phanele, etsa bonnete ba hore sebatli ha se sekame ho ea tlase ka likhato tse fetang 5.
- Se ke oa tobetsa skrine ha u ntse u lokisa angle ea mochine. Tšoara bezel feela.
Mosebetsi oa Adaptive-Sync
- Mosebetsi oa Adaptive-Sync o sebetsa le DP / HDMI
- Khadi ea Graphics e Lumellanang: Khothaletsa lenane hore le ka tlase, le lona le ka hlahlojoa ka ho etela KGOTSO
• Letoto la Radeon™ RX Vega
• Letoto la Radeon™ RX 500
• Letoto la Radeon™ RX 400
• Radeon™ R9/R7 300 letoto (R9 370/X, R7 370/X, R7 265 ntle le)
• Radeon™ Pro Duo (2016)
• Letoto la Radeon™ R9 Nano
• Letoto la Radeon™ R9 Fury
• Radeon™ R9/R7 200 letoto (R9 270/X, R9 280/X ntle le)
Ho fetola
Li-hotkeys
| 1 | Mohloli/Auto/Tsoa |
| 2 | Pono e hlakileng/ |
| 3 | Karo-karolelano ea molumo / setšoantšo /> |
| 4 | Menu/kena |
| 5 | Matla |
Menu/kena
Ha OSD e le sieo, Tobetsa ho hlahisa OSD kapa ho netefatsa khetho.
Matla
Tobetsa konopo ea Matla ho bulela mochine.
Karolelano ea molumo / setšoantšo
Ha OSD e le sieo, Tobetsa > Konopo ea molumo ho bareng ea ho fetola molumo o sebetsang, Tobetsa <kapa> ho fetola molumo.
Ha OSD e le sieo, Tobetsa > hotkey ho karo-karolelano ea setšoantšo e sebetsang, Tobetsa <kapa > ho fetola 4:3 kapa ka bophara. (Haeba boholo ba skrini ea sehlahisoa e le 4: 3 kapa qeto ea lets'oao la ho kenya e le sebopeho se pharaletseng, konopo e chesang e koetsoe hore e lokisoe).
Mohloli/Auto/Tsoa
Ha OSD e koetsoe, tobetsa konopo ea Source / Auto / Exit e tla ba Mohloli oa hot hot mosebetsi.
Ha OSD e koetsoe, tobetsa konopo ea Source/Auto/Exit khafetsa ka metsotsoana e 2 ho etsa auto configure (Feela mehlala e nang le D-Sub).
Pono e Hlakileng
- Ha ho se na OSD, Tobetsa konopo ea "<" ho kenya Clear Vision.
- Sebelisa likonopo " > " kapa ">" ho khetha pakeng tsa li-setting tse fokolang, tse mahareng, tse matla kapa tse koetsoeng. Litlhophiso tsa kamehla li "tima".
- Tobetsa 'me u tšoare konopo ea "<" metsotsoana e 5 ho kenya tšebetsong Demo e hlakileng ea Vision, mme molaetsa oa "Demo e hlakileng ea Vision: on" e tla hlaha skrineng nako ea metsotsoana e 5. Tobetsa konopo ea Menu kapa Tsoa, molaetsa o tla nyamela. Tobetsa 'me u tšoare konopo ea "<" metsotsoana e 5 hape, Demo ea Clear Vision e tla tima.
Mosebetsi o hlakileng oa Vision o fana ka setšoantšo se setle ka ho fetisisa viewho ba le boiphihlelo ka ho fetolela litšoantšo tse hlakileng le tse lerootho hore e be litšoantšo tse hlakileng le tse hlakileng.
Litlhophiso tsa OSD
Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
- Tobetsa ea
MENU-konopo ho kenya tshebetsong fensetere ya OSD. - Tobetsa ka ho le letšehali kapa ka ho le letona ho tsamaea ka har'a lits'ebetso. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo ea MENU ho e kenya tšebetsong, tobetsa Le letšehali kapa ka ho le letona ho tsamaea ka har'a li-menu tse nyane. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo ea MENU ho e kenya tšebetsong.
- Tobetsa ka ho le letshehadi kapa ho fetola di-setting tsa tshebetso e kgethilweng. Tobetsa ho tsoa. Haeba u batla ho fetola ts'ebetso e 'ngoe, pheta mehato ea 2-3.
- Mosebetsi oa Lock ea OSD: Ho notlela OSD, tobetsa 'me u tšoare konopo ea MENU ha mochini o koetsoeng ebe o tobetsa konopo ea matla ho bulela sebali. Ho notlolla OSD - tobetsa o hatelle konopo ea MENU ha sebali se koetsoe ebe o tobetsa konopo ea matla ho bulela sebali.
Lintlha:
- Haeba sehlahisoa se na le lets'oao le le leng feela, ntho ea "Input Select" e koetsoe hore e lokisoe.
- Mekhoa ea ECO (ntle le Standard mode), DCR, DCB mode le Picture Boost, bakeng sa tsena tse 'nè e bolela hore ho ka ba le naha e le' ngoe feela.
Leseli
|
|
Bapisa | 0-100 | Phapang ho tsoa ho Digital-register. | |
| Khanya | 0-100 | Phetoho ea Backlight. | ||
|
Mokhoa oa Eco |
Standard |
|
Mokhoa o tloaelehileng. | |
| Mongolo |
|
Mokhoa oa mongolo. | ||
| Marang-rang |
|
Mokhoa oa Marang-rang. | ||
| Papali |
|
Mokhoa oa Papali. | ||
| Movie |
|
Mokhoa oa lifilimi. | ||
| Lipapali |
|
Mokhoa oa Lipapali. | ||
| Ho bala | Mokhoa oa ho bala. | |||
|
Gamma |
Gamma1 | Fetola ho Gamma 1. | ||
| Gamma2 | Fetola ho Gamma 2. | |||
| Gamma3 | Fetola ho Gamma 3. | |||
|
DCR |
On |  |
Numella karolelano ea phapang. | |
| E tima | Tlosa tekanyo ea phapang ea dynamic. | |||
|
Mokhoa oa HDR |
E tima |
Khetha Mokhoa oa HDR. |
||
| Setšoantšo sa HDR | ||||
| Movie ea HDR | ||||
| Papali ea HDR | ||||
Hlokomela:
Ha "HDR Mode" e setetsoe ho "no-off", lintho tse "Contrast", "ECO", "Gamma" li ke ke tsa fetoloa.
Tlhophiso ea Litšoantšo
|
|
Tshupanako | 0-100 | Fetosa Oache ea setšoantšo ho fokotsa lerata la Vertical-Line. |
| Mokhahlelo | 0-100 | Fetola Karolo ea Sets'oants'o ho fokotsa lerata le Horizontal-Line | |
| bohale | 0-100 | Fetola bohloeki ba setšoantšo | |
| H. Boemo | 0-100 | Fetola boemo bo otlolohileng ba setšoantšo. | |
| V. Boemo | 0-100 | Fetola boemo bo otlolohileng ba setšoantšo. |
Ho Hlophisa Mebala
|
|
Mobala Temp. |
E futhumetse | Hopola Mocheso oa Mobala o Mofuthu ho tsoa ho EEPROM. | |
| Tloaelehileng | Hopola Mocheso o Tloaelehileng oa 'Mala ho tsoa ho EEPROM. | |||
| Pholile | Hopola Mocheso oa Mobala o Pholile ho tsoa ho EEPROM. | |||
| sRGB | Hopola Mocheso oa Mobala oa SRGB ho tsoa ho EEPROM. | |||
| Mosebedisi | Khutlisa Mocheso oa Mobala ho tsoa ho EEPROM. | |||
|
Mokhoa oa DCB |
Ntlafatsa ka botlalo | Tlosa kapa u lumelle mokhoa oa ho ntlafatsa ka botlalo | ||
| Letlalo la Tlhaho | Thibela kapa bulela Mokhoa oa Letlalo la Tlhaho | |||
| Tšimo e Tala | Thibela kapa Nolofatsa Mokhoa oa Sebaka sa Green | |||
| Botala ba leholimo | Thibela kapa Numella Mokhoa oa Sky-blue | |||
| Fumana ka ho iketsa | Tlosa kapa u lumelle mokhoa oa AutoDetect | |||
| E tima | Tima kapa etsa Mode Off | |||
| Pontšo ea DCB | Ho Bulela kapa ho Koala | Tlosa kapa bulela Demo | ||
| Khubedu | 0-100 | Phaello e khubelu ho tsoa ho Digital-register. | ||
| Botala | 0-100 | Green fumana ho tswa ho Digital-register. | ||
| Boputsoa | 0-100 | Phaello e putsoa ho tsoa ho Digital-register. |
Hlokomela:
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho tsohle tse tlasa "Colour Setup" li ka se fetoloe.
Matlafatsa Litšoantšo
|
|
Frame e Khanyang | hodima kapa ho tima | Thibela kapa Numella Frame e Khanyang |
| Boholo ba foreimi | 14-100 | Fetola Boholo ba Frame | |
| Khanya | 0-100 | Fetola Khanya ea Frame | |
| Bapisa | 0-100 | Fetola Phapano ea Frame | |
| H. boemo | 0-100 | Fetola Sebaka se rapameng sa Frame | |
| V. boemo | 0-100 | Fetola Maemo a theohileng a Frame |
Hlokomela:
Fetosa ho khanya, phapang, le boemo ba Frame e Khanyang hore e be betere viewka boiphihlelo.
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho tsohle tse tlasa "Picture Boost" li ke ke tsa fetoloa.
Setup ea OSD
 |
Puo | Khetha puo ea OSD | |
| Khefutso | 5-120 | Fetola nako ea OSD | |
| H. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| V. Boemo | 0-100 | Fetola boemo bo otlolohileng ba OSD | |
| Ponaletso | 0-100 | Fetola ponaletso ea OSD | |
| Khopotso ea Khefu | hodima kapa ho tima | Tlosa khopotso haeba mosebelisi a lula a sebeletsa ho feta
ho feta 1hr |
Litlhophiso tsa Lipapali
 |
E tima | Ha ho ntlafatso ka papali ea setšoantšo sa Smart | |
| FPS | Bakeng sa ho bapala lipapali tsa FPS (Motho oa Pele Shooter). E ntlafatsa lintlha tse lefifi tsa boemo bo botšo. |
||
| RTS | Bakeng sa ho bapala RTS (Real Time Strategy). E ntlafatsa boleng ba setšoantšo. | ||
| Mokhoa oa Papali | Peisong | Bakeng sa ho bapala lipapali tsa mabelo, E fana ka nako e potlakileng ea karabo le mebala e phahameng. | |
| Sebapali sa 1 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 1. | ||
| Sebapali sa 2 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 2. | ||
| Sebapali sa 3 | Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 3. | ||
|
Taolo ea Moriti |
0-100 |
Shadow Control Default ke 50, ebe mosebelisi oa ho qetela a ka fetola ho tloha ho 50 ho isa ho 100 kapa 0 ho eketsa phapang bakeng sa setšoantšo se hlakileng.
1. Haeba setšoantšo se le lefifi haholo hore se ka bonoa ka ho hlaka, ho fetola ho tloha ho 50 ho isa ho 100 bakeng sa setšoantšo se hlakileng. |
|
| E tima | |||
|
Ho khanna ho feta tekano |
E fokola | Fetola nako ea karabo. | |
| Mahareng | |||
| E matla | |||
| 'Mala oa Papali | 0-20 | 'Mala oa Papali o tla fana ka boemo ba 0-20 bakeng sa ho fetola saturation ho fumana setšoantšo se betere. | |
|
Mokhoa oa LowBlue |
Ho bala / Ofisi /
Marang-rang / Multimedia / E tima |
Fokotsa leqhubu la khanya e putsoa ka ho laola mocheso oa 'mala. | |
|
Tlanya Ntlha |
Ho Bulela kapa ho Koala |
Mosebetsi oa "Dial Point" o beha letšoao bohareng ba skrine bakeng sa ho thusa libapali ho bapala lipapali tsa First Person Shooter (FPS) ka sepheo se nepahetseng le se nepahetseng. | |
|
Adaptive-Sync |
Thibela kapa Noble Adaptive-Sync.c | ||
| (24B2XDA/24B2XDAM/ 27B2DA) | Ho Bulela kapa ho Koala | Khopotso ea Adaptive-Sync Run: Ha sesebelisoa sa Adaptive- Sync se nolofalitsoe, ho ka ba le khanya libakeng tse ling tsa papali. | |
|
Sebopeho sa foreimi |
Off / Right-up / Right- |
||
| (24B2XDA/24B2XDAM/ | Tlase / Ka ho le letšehali-Fatše / | Hlahisa maqhubu a V hukung e khethiloeng | |
| 27B2DA) | Le letšehali-Holimo |
Hlokomela:
Ha "HDR Mode" tlasa "Luminance" e behiloe ho "non-off", lintho "Game Mode", "Shadow Control", "Game Colour", "Low Blue Mode" li ke ke tsa fetoloa.
Eketsa
|
|
Khetho ea ho kenya | Kgetha Mohlodi wa Letshwao la Kena | |
| Sebopeho sa Auto. | Ee kapa che | Itokisetse setšoantšo ho ba sa kamehla. (Bakeng sa D-SUB
mefuta) |
|
| Nako ea nako | Lihora tse 0 ho isa ho tse 24 | Khetha nako ea nako ea DC | |
|
Karolelano ea setšoantšo |
Ka bophara |
Khetha tekanyo ea setšoantšo bakeng sa pontšo. |
|
| 4:3 | |||
| DDC/CI | Ee kapa che | Bulela / Off DDC / CI Support | |
|
Seta bocha |
Ee kapa che | Seta menu bocha hore e be ea kamehla (ENERGY STAR® e fumaneha bakeng sa mefuta e khethiloeng) |
Etsoa
|
|
Etsoa | Tsoa OSD ea mantlha |
Letšoao la LED
| Boemo | Mmala oa LED |
| Mokhoa o felletseng oa Matla | Bosoeu |
| Mokhoa oa ho tima | namunu |
Tharollo ya mathata
| Bothata & Potso | Litharollo Tse ka khonehang |
| Matla a LED ha a TSOE | Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo. |
|
Ha ho litšoantšo skrineng |
Na thapo ea motlakase e hokahane hantle? Lekola khokelo ea thapo ea motlakase le phepelo ea motlakase. Na thapo e hokahane hantle? (E hoketswe ka thapo ya VGA) Sheba kgokelo ya thapo ya VGA. (E hoketswe ka thapo ya HDMI) Sheba kgokelo ya thapo ya HDMI. (E hoketsoe ka thapo ea DP) Sheba khokahanyo ea thapo ea DP. * Kenyeletso ea VGA / HDMI / DP ha e fumanehe mefuteng e meng le e meng. Haeba motlakase o le teng, qala komporo ea hau pele ho bona skrineng sa pele (skrine sa ho kena) se ka bonoang. Haeba skrineng sa pele (skrine sa ho kena) se hlaha, qala komporo ka mokhoa o sebetsang (mokhoa o bolokehileng bakeng sa Windows 7/ 8/10) ebe u fetola makhetlo a karete ea video. (Sheba ho Setting ea Optimal Resolution) Haeba skrine ea pele (skrine sa ho kena) se sa hlahe, ikopanye le Setsi sa Litšebeletso kapa morekisi oa hau. A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng le khafetsa eo sebali se ka sebetsanang le eona hantle. Fetola boholo ba qeto le maqhubu ao sebali se ka sebetsanang le ona hantle. Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe. |
|
Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting |
Fetola phapang le taolo ea khanya. Tobetsa ho itokisa ka boyona. Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho kenya sebali ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka morao. |
| Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong | Tsamaisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole haholo le sesupa-tsela. Sebelisa sekhahla se phahameng sa ho khatholla sebali sa hau se khonang ho se etsa qetong eo u e sebelisang. |
|
Monitor o ntse a sa sebetse- Mokhoa” |
The Computer Power Switch e lokela ho ba boemong ba ON. Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. Lebone la LED le lokela ho BUA kapa HO TLOA ka mor'a ho otla konopo ea CAPS LOCK. |
| Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE) | Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. |
| Setšoantšo sa skrini ha se bohareng kapa boholo bo nepahetseng | Fetola Boemo ba H le Boemo ba V kapa o tobetse hot-key (AUTO). |
| Setšoantšo se na le mathata a mebala (bosoeu ha bo shebahale bo le tšoeu) | Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. |
| Litšitiso tse tšekaletseng kapa tse emeng skrineng | Sebelisa Windows 7/8/10 mokhoa oa ho koala ho fetola CLOCK le FOCUS. Tobetsa ho itokisa. |
| Taolo & Tshebeletso | Ka kopo, sheba Tlhahisoleseding ea Melao le Ts'ebeletso e bukeng ea CD kapa www.aoc.com (ho fumana mohlala oo u o rekileng naheng ea heno le ho fumana Taolo le Boitsebiso ba Litšebeletso leqepheng la Tšehetso. |
Tlhaloso
Tlhaloso e Akaretsang
|
Phanele |
Lebitso la mohlala | 24B2XD | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 60.47cm e diagonane | |||
| Sekhahla sa pixel | 0.2745(H) limilimithara x 0.2745(V) limilimithara | |||
| Video | R, G, B Analog Interface & DVI Interface | |||
| Arohane Sync | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30-85kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 527.04 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-75Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 296.46 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng | 1920×1080@60Hz | |||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 19Vdc,1.31A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 19W | ||
| Max. (khanya = 100, phapang =100) | ≤ 23W | |||
| Boemo ba standby | ≤0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | DVI/D-Sub | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
https://eprel.ec.europa.eu/qr/393949
|
Phanele |
Lebitso la mohlala | 24B2XDM | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 60.47cm e diagonane | |||
| Sekhahla sa pixel | 0.2745(H) limilimithara x 0.2745(V) limilimithara | |||
| Video | R, G, B Analog Interface & DVI Interface | |||
| Arohane Sync | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30-85kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 527.04 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-75Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 296.46 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng | 1920×1080@60Hz | |||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 19Vdc,1.31A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 21W | ||
| Max. (khanya = 100, phapang =100) | ≤ 23W | |||
| Boemo ba standby | ≤0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | DVI/D-Sub | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
|
Phanele |
Lebitso la mohlala | 24B2XDA | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 60.47cm e diagonane | |||
| Sekhahla sa pixel | 0.2745(H) limilimithara x 0.2745(V) limilimithara | |||
| Video | R, G, B Analog Interface & HDMI Interface & DVI Interface | |||
| Arohane Sync | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30-85kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 527.04 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-75Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 296.46 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng | 1920×1080@60Hz(VGA/DVI)
1920×1080@75Hz(HDMI) |
|||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 19Vdc,1.31A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 19W | ||
| Max. (khanya = 100, phapang =100) | ≤ 23W | |||
| Boemo ba standby | ≤0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | HDMI/DVI/D-Sub/Audio in/Earphone e tima | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
|
Phanele |
Lebitso la mohlala | 24B2XDAM | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 60.47cm e diagonane | |||
| Sekhahla sa pixel | 0.2745(H) limilimithara x 0.2745(V) limilimithara | |||
| Video | R, G, B Analog Interface & HDMI Interface & DVI Interface | |||
| Arohane Sync | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30-85kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 527.04 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-75Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 296.46 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng | 1920×1080@60Hz(VGA/DVI)
1920×1080@75Hz(HDMI) |
|||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 19Vdc,1.31A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 21W | ||
| Max. (khanya = 100, phapang =100) | ≤ 28W | |||
| Boemo ba standby | ≤0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | HDMI/DVI/D-Sub/Audio in/Earphone e tima | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
|
Phanele |
Lebitso la mohlala | 27B2DA | ||
| Sistimi ea ho khanna | TFT Mmala oa LCD | |||
| Viewkhona Sebopeho sa setšoantšo | 68.6cm e diagonane | |||
| Sekhahla sa pixel | 0.3114(H) limilimithara x 0.3114(V) limilimithara | |||
| Video | R, G, B Analog Interface & HDMI Interface & DVI Interface | |||
| Arohane Sync | H / V TTL | |||
| Mmala oa Pontšo | 16.7M Mebala | |||
|
Ba bang |
Meeli ea scan | 30-85kHz | ||
| Boholo ba scan ninete e holimo (Boholo) | 597.888 limilimithara | |||
| Lekhahla la scan ninemanga.com | 48-75Hz | |||
| Boholo ba Skena se Otlolohileng(Boholo) | 336.312 limilimithara | |||
| Qeto e nepahetseng esale pele | 1920×1080@60Hz | |||
| Qeto e phahameng | 1920×1080@60Hz(VGA/DVI)
1920×1080@75Hz(HDMI) |
|||
| Plug & Bapala | VESA DDC2B / CI | |||
| Mohloli oa Matla | 19Vdc,1.31A | |||
|
Tšebeliso ea Matla |
Tloaelehileng(khanya le phapang ea kamehla) | 19W | ||
| Max. (khanya = 100, phapang =100) | ≤ 25W | |||
| Boemo ba standby | ≤0.3W | |||
| Litšobotsi Tsa 'Mele | Mofuta oa Sehokelo | HDMI/DVI/D-Sub/Audio in/Earphone e tima | ||
| Mofuta oa Cable ea Letšoao | Detachable | |||
|
Tikoloho |
Mocheso | Ho sebetsa | 0°~ 40° | |
| E sa sebetseng | -25°~ 55° | |||
| Mongobo | Ho sebetsa | 10% ~ 85% (ha e fokotsehe) | ||
| E sa sebetseng | 5% ~ 93% (ha e fokotsehe) | |||
| Bophahamo | Ho sebetsa | 0~ 5000 m (0~ 16404ft) | ||
| E sa sebetseng | 0~ 12192m (0~ 40000ft) | |||
Seta pele Mekhoa ea Pontšo
24B2XD/24B2XDM
| TS'ELISO | TSIETSO | KHAOLO EA HORIZONTAL (kHz) | LEKHETLO LA LERETICAL (Hz) |
|
VGA |
640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
| Mekhoa ea MAC VGA | 640×480@67Hz | 35 | 66.667 |
| Mokhoa oa IBM | 720×400@70Hz | 31.469 | 70.087 |
|
SVGA |
800×600@56Hz | 35.156 | 56.25 |
| 800×600@60Hz | 37.879 | 60.317 | |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
| MAC MEKHOA SVGA | 832×624@75Hz | 49.725 | 74.5 |
|
Katoloso ea XGA |
1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
|
SXGA |
1280×1024@60Hz | 63.981 | 60.02 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
|
WSXG |
1280×720@60HZ | 45 | 60 |
| 1280×960@60Hz | 60 | 60 | |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.876 |
| WSXGA + | 1680×1050@60Hz | 65.29 | 59.954 |
| FHD | 1920×1080@60Hz | 67.5 | 60 |
Likabelo tsa Pin
15-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Video-Khubelu | 9 | +5V |
| 2. | Video-Botala | 10 | Fatše |
| 3. | Video-Putsoa | 11 | NC |
| 4. | NC | 12 | Lintlha tsa DDC-Serial |
| 5. | Fumana Cable | 13 | H-kgokagantswe |
| 6. | GND-R | 14 | V-sync |
| 7. | GND-G | 15 | Oache ea DDC-Serial |
| 8. | GND-B |
19-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1. | Lintlha tsa TMDS 2+ | 9. | Lintlha tsa TMDS 0- | 17. | Lebala la DDC / CEC |
| 2. | TMDS Data 2 Sireletso | 10. | Oache ea TMDS + | 18. | + 5V Matla |
| 3. | Lintlha tsa TMDS 2- | 11. | Theko ea TMDS Clock | 19. | Hot polaka lemoha |
| 4. | Lintlha tsa TMDS 1+ | 12. | Nako ea TMDS- | ||
| 5. | Lintlha tsa TMDS 1Shield | 13. | CEC | ||
| 6. | Lintlha tsa TMDS 1- | 14. | E bolokiloe (NC ho sesebelisoa) | ||
| 7. | Lintlha tsa TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Sireletso | 16. | SDA |
24-Pin Mmala Pontšo ea Pontšo ea Pontšo
| Pin No. | Lebitso la Letshwao | Pin No. | Lebitso la Letshwao |
| 1 | Lintlha tsa TMDS 2- | 13 | Lintlha tsa TMDS 3+ |
| 2 | Lintlha tsa TMDS 2+ | 14 | + 5V Matla |
| 3 | Lintlha tsa TMDS 2/4 Shield | 15 | Fatše (bakeng sa+5V) |
| 4 | Lintlha tsa TMDS 4- | 16 | Hot polaka lemoha |
| 5 | Lintlha tsa TMDS 4+ | 17 | Lintlha tsa TMDS 0- |
| 6 | Clock ea DDC | 18 | Lintlha tsa TMDS 0+ |
| 7 | Boitsebiso ba DDC | 19 | Lintlha tsa TMDS 0/5 Shield |
| 8 | NC | 20 | Lintlha tsa TMDS 5- |
| 9 | Lintlha tsa TMDS 1- | 21 | Lintlha tsa TMDS 5+ |
| 10 | Lintlha tsa TMDS 1+ | 22 | Theko ea TMDS Clock |
| 11 | Lintlha tsa TMDS 1/3 Shield | 23 | Oache ea TMDS + |
| 12 | Lintlha tsa TMDS 3- | 24 | Oache ea TMDS - |
- Feela bakeng sa mehlala e itseng
Hokela le ho Bapala
Plug & Play DDC2B Feature
Sesebelisoa sena se na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a.
DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
Litokomane / Lisebelisoa
 |
Tlhaloso: AOC 24B2XD LCD Monitor [pdf] Bukana ea Mosebelisi 24B2XD LCD Monitor, 24B2XD, LCD Monitor, Monitor |
 |
Tlhaloso: AOC 24B2XD LCD Monitor [pdf] Litaelo 24B2XD, 24B2XDA, 27B2DA, 24B2XD LCD Monitor, LCD Monitor, Monitor |