F Series Dual Power Supply Access Controllers
Tataiso ea ho Kena
Maximal F Series Dual Power Supply Access Controllers
Phepelo ea Matla a mabeli
Fumana Lilaoli tsa Matla (tse kopantsoeng)
Mefuta e kenyeletsa:
| Boholo11F – Phepelo ea Matla 1: 12VDC @ 3.3A kapa 24VDC @ 3.6A. – Phepelo ea Matla 2: 12VDC @ 3.3A kapa 24VDC @ 3.6A. - Liphetho tse leshome le metso e tšeletseng (16) tse sirelelitsoeng ka matla a fokolang a fuse. |
Boholo33F – Phepelo ea Matla 1: 12VDC @ 5.3A kapa 24VDC @ 5.6A. – Phepelo ea Matla 2: 12VDC @ 5.3A kapa 24VDC @ 5.6A. - Liphetho tse leshome le metso e tšeletseng (16) tse sirelelitsoeng tse se nang matla a fokolang. |
Boholo55F – Phepelo ea Matla 1: 12VDC @ 9.3A. – Phepelo ea Matla 2: 12VDC @ 9.3A. - Liphetho tse leshome le metso e tšeletseng (16) tse sirelelitsoeng tse se nang matla a fokolang. |
Boholo75F – Phepelo ea Matla 1: 12VDC @ 9.3A. – Phepelo ea Matla 2: 24VDC @ 9.6A. - Liphetho tse leshome le metso e tšeletseng (16) tse sirelelitsoeng tse se nang matla a fokolang. |
Boholo77F – Phepelo ea Matla 1: 24VDC @ 9.6A. – Phepelo ea Matla 2: 24VDC @ 9.6A. - Liphetho tse leshome le metso e tšeletseng (16) tse sirelelitsoeng tse se nang matla a fokolang. |
maximal Series Overview:
maximal Access Power Controllers ba abela le ho fetola matla ho fihlella litsamaiso tsa taolo le lisebelisoa. Ba fetola tlhahiso ea 120VAC 60Hz hore e be tse leshome le metso e tšeletseng (16) tse laoloang ka boikemelo tsa 12VDC kapa 24VDC tse sirelelitsoeng ka fuse.
Lisebelisoa tsena tsa Fail-Safe/Fail-Sireletsehile li ka fetoleloa ho likhokahano tsa "C" tsa mofuta o omileng. Liphello li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng (NO) e kenya letsoho e omileng e tsoang ho Access Control System, Keypad, Push Button, REX PIR, joalo-joalo Li-Units li tla tsamaisa matla ho lisebelisoa tse sa tšoaneng tsa lisebelisoa tsa ho laola lisebelisoa tse kenyeletsang Mag Locks, Motlakase, Lits'oants'o tsa Motlakase oa Magnetic, joalo-joalo Seboka sa FACP se nolofalletsa Emergency Egress, le Alarm Monitoring, kapa se ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Karolo ea ho khaola alamo ea mollo e ka khethoa ka bomong bakeng sa liphetho tsohle kapa tse leshome le metso e tšeletseng (16). Lisebelisoa tsohle tse hokahanyang li tlameha ho ngolisoa ka UL.
maximal Series Configuration Chart:
*Maximal11F feela: Yuniti ena e thathamisitsoe e le phepelo ea motlakase e ikemetseng ea Sehlopha sa 2 e nang le betri e emeng 'me e loketse ho sebelisa matla: lisensara, le lisebelisoa tsa motlakase (mohlala, ho otla ha mamati a motlakase).
*Maximal33F, Maximal55F, Maximal75F, le Maximal77F: Phallo ea DC bakeng sa lisebelisoa tsena tsa motlakase ha e na matla a fokolang. Haeba tlhahiso e lekanyelitsoeng ea matla e hlokahala ts'ebelisong ea sehlahisoa sa ho qetela, sephetho sa DC se tsoang phepelong ea motlakase se tlameha ho hokahana le yuniti ea taolo e Lokisitsoeng ka thoko kapa boto ea lisebelisoa e fanang ka liphetho tse lekanyelitsoeng tsa matla. Sehlahisoa (li)hlahisoa se fanang ka (li)sebelisoa tse fokolang matla se tlameha ho thathamisoa ka mokhoa o loketseng ts'ebeliso e itseng ea sehlahisoa sa ho qetela 'me se kenngoe lithapo ho latela litaelo tsa ho kenya sehlahisoa. Mekhoa ea ho kopanya ea Sehlopha sa 1, karohano ea lipotoloho, le libaka tse loketseng tse hakantsoeng ka mollo kaofela li tlameha ho nahanoa ha ho hokahanya tlhahiso ea DC ea phepelo ea motlakase ho lisebelisoa tsa sehlahisoa sa ho qetela. Litholoana tse thusang tsa likarolo tsena li na le matla a fokolang.
Lethathamo la Setsi:
Lintlha tsa UL bakeng sa Lisebelisoa tsa US:
UL 294* - UL e thathamisitsoeng bakeng sa Litsi tsa Tsamaiso ea ho Finyella.
*ANSI/UL 294 7th Ed. Maemo a Tshebetso a Taolo ya ho Kena:
Tlhaselo e Senyang - I; Boitshoko – I; Line Security - I; Matla a ho ema - II, III, IV.
Lintlha tsa UL bakeng sa Lisebelisoa tsa Canada:
ULC-S319-05 - Lisebelisoa tsa Electronic Access Control Systems Sehlopha sa I.
CSA C22.2 No.205 - Lisebelisoa tsa Letšoao.
ULC-S319-05 Electronic Access Control Systems e tla be e sa sebetse ka tšebeliso ea leha e le efe ea tlatsetso, katoloso, mohopolo kapa li-module tse ling tse entsoeng ke moetsi kapa bahlahisi ba bang.
maximal Series Features:
ACM8 Access Controller Modules:
- Ba leshome le metso e ts'eletseng (16) ba ikemela ba hlahisa liphetho tse laoloang. Likhetho tsa tlhahiso:
a) Tse leshome le metso e ts'eletseng (16) tse feliloeng tsa matla a feliloeng.
b) Tse leshome le metso e ts'eletseng (16) tse hlahisang matla a feliloeng-Sefe.
c) Leshome le metso e ts'eletseng (16) liphetho tsa "C" tsa relay (rated @ 5A/28VDC kapa VAC).
d) Motsoako ofe kapa ofe oa tse ka holimo. - Leshome le metso e ts'eletseng (16) Sistimi ea Taolo ea Phihlello e kenya tse kenang. Likhetho tsa ho kenya letsoho:
a) Tse leshome le metso e ts'eletseng (16) tse atisang ho buloa (NO) li-trigger tse omileng.
b) Tse leshome le metso e ts'eletseng (16) tse kenyang likoleke tse bulehileng.
c) Kopanyo efe kapa efe ea tse kaholimo. - Leshome le metso e ts'eletseng (16) le sa fetoheng le sefiloeng. lihlahisoa tsa matla (lihlahisoa li lekantsoe @ 2.5A).
- Li-LED tse khubelu ho boto ea ACM8 li bontša hore lihlahisoa tsa motho ka mong li hlahisoa (li-relay li matlafalitsoe).
- Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8).
Likhetho tsa ho kenya Alarm ea Mollo:
a) Ka tloaelo bula (NO) kapa ka tloaelo koaloa (NC) dry trigger input.
b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP. - LED e tala botong ea ACM8 e bonts'a ho hakolloa ha FACP ho qalile.
- Phatlalatso ea FACP e bonts'a hore tlhahiso ea FACP e qalile (foromo "C" lebitso le rated @ 1A/28VDC ha e hlahlojoe ke UL).
- eFlow Power Supply/Charger e fana ka matla a tloaelehileng bakeng sa boto ea ACM8 (wiring ea fektheri) le lisebelisoa tsohle tse hokahaneng tsa taolo ea phihlello ( wiring ea tšimo).
- Li-fuse tse kholo tsa boto ea ACM8 li fuoe lintlha tsa @ 10A. Li-fuse tse hlahisoang li reitiloe @ 3.5A.
EFlow Power Supply/Charger:
- Kenyelletso: 120VAC, 60Hz.
- Bakeng sa tlhahiso voltage le phepelo ea hajoale e lebisa ho MaximalF series Configuration Chart, pg. 3.
- Motlatsi oa Sehlopha sa 2 oa Motlakase o hlahisoang ke Matla a lekantsoeng @ 1A (ha aa fetoha).
- Ho tlolatagtshireletso.
- Chaja e hahelletsoeng ka hare bakeng sa asiti ea lead e tiisitsoeng kapa libeteri tsa mofuta oa gel.
- Boholo ba tefiso ea hajoale ke 1.54A.
- Fetolela ka ho iketsa betri e emeng ha AC e hloleha. Matla a ho fetisetsoa ho betri e emeng e etsahala hang hang ha ho na tšitiso.
- Ho khaoha ha Alamo ea Mollo e hlokometsoeng (ho latching kapa ho se latching) 10K EOL resistor. E sebetsa ho trigger e tloahelehileng e bulehileng (NO) kapa ka tloaelo e koetsoeng (NC).
- AC e hloleha ho laola (ho theha mabitso a "C").
- Betri ha e sebetse le ho hlokomela boteng (foromo "C" mabitso).
- Ho tima matla a tlase. E koala li-terminals tsa DC haeba betri e le matlatage theoha ka tlase ho 71-73% bakeng sa li-unit tsa 12V le 70-75% bakeng sa li-unit tsa 24V (ho itšetlehile ka matla a matla). E thibela ho tsoa ha betri e tebileng.
- Bakeng sa fuse, litekanyetso li lebisa ho MaximalF letoto la Configuration Chart, pg. 3.
- Green AC Power LED e bonts'a 120VAC e teng.
- Lipontšo tsa LED tsa AC le tse hlahisoang ke DC.
- Tšireletso e khutšoanyane ea potoloho le tšireletso e feteletseng.
- Sebaka se kampetsoeng se nka libeteri tse fihlang ho tse 'ne (4) 12VDC/12AH.
Litekanyo tse katiloeng (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).
Litaelo tse kholo tsa ho Kena:
Mekhoa ea ho thaepa e tla lumellana le Khoutu ea Naha ea Motlakase/NFPA 70/ANSI, Khoutu ea Motlakase ea Canada, Karolo ea I, Karolo ea II, le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela.
| Boto ea Phepelo ea Matla LED Diagnostics | (leq. 7) |
| Access Power Controller LED Diagnostics | (leq. 7) |
| Litlhaloso tsa Boto ea Phepelo ea Motlakase E eme ka Battery | (leq. 7) |
| Boitsebiso ba Boto ea Phepelo ea Matla | (leq. 8) |
| Fumana Boitsebiso ba Terminal Controller Power | (leq. 8) |
| Sephetho sa Boto ea Phepelo ea Matla Voltage Litlhophiso | (leq. 9) |
| Fihla Selaoli sa Matla Sets'oants'o se Tloaelehileng sa Kopo | (leq. 9) |
| FACP / Optional Power Supply Hook-up Diagrams | (leq. 12) |
- Beha yuniti sebakeng se lakatsehang. Tšoaea 'me u phunye masoba leboteng ho tsamaisana le likoti tse tharo tse ka holimo ka har'a sebaka se koalehileng. Kenya li-fasteners le li-screws tse tharo leboteng 'me lihlooho tsa screw li hlahelle. Beha masoba a ka holimo a koaletsoeng holim'a likurufu tse tharo tse ka holimo, boemo, 'me u sireletsehe. Tšoaea boemo ba likoti tse tharo tse tlase. Tlosa sebaka se kampetsoeng. Hlakola likoti tse ka tlase ebe u kenya li-fasteners tse tharo. Beha masoba a ka holimo a kokelo holim'a likurufu tse tharo tse ka holimo. Kenya li-screw tse tharo tse tlase 'me u tiise hore u tiisa li-screw tsohle (Enclosure Dimensions, pg. 15).
- Hokela matla a AC a sa fetoheng (120VAC 60Hz) ho li-terminals tse tšoailoeng [L, N] (Setšoantšo sa 3, leqephe la 10). Tala "AC" LED botong ea phepelo ea motlakase e tla bulela. Leseli lena le ka bonoa ka lense ea LED e monyako oa sebaka se kampetsoeng. Sebelisa 14 AWG kapa e kholoanyane bakeng sa likhokahano tsohle tsa matla. Sireletsehile terata e tala lebisa fatše fatše.
Boloka lithapo tse lekanyelitsoeng matla li arohane le lithapo tse se nang matla.
Ho tlameha ho fanoe ka sebaka se fokolang sa 0.25 "(Setšoantšo sa 3, leqephe la 10).
TLHOKOMELO: U se ke ua tšoara likarolo tsa tšepe tse pepenene. Koala matla a potoloho ea lekala pele u kenya kapa u sebeletsa lisebelisoa. Ha ho na likarolo tse ka sebelisoang ke mosebelisi kahare. Fetisetsa ho kenya le ho fana ka litšebeletso ho basebeletsi ba nang le tsebo. - Khetha e lakatsehang DC output voltage ka ho beha SW1 sebakeng se loketseng ho boto ea phepelo ea matla (Maximal11F le Maximal33F) (setšoantšo sa 1, leqephe la 9). Phepelo ea matla a Maximal55F ke feme e behiloeng ho 12VDC.
Phepelo ea matla a Maximal77F ke feme e behiloeng ho 24VDC. Maximal75F e na le boto e le 'ngoe (1) ea phepelo ea motlakase eo feme e behiloeng ho 12VDC, le boto e le 'ngoe (1) ea phepelo ea motlakase e behiloeng fekthering ho 24VDC. - Lekanya tlhahiso ea matlatage ea yuniti pele o hokela lisebelisoa life kapa life ho netefatsa ts'ebetso e nepahetseng.
Phallo e sa lokang kapa e phahamengtage tla senya lisebelisoa tsena. - Likhetho tsa tlhahiso (setšoantšo sa 2, leqephe la 9): Sehlopha se tla fana ka lisebelisoa tse leshome le metso e tšeletseng (16) tse fetotsoeng, tse leshome le metso e tšeletseng (16) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa motlakase o fetotsoeng le mefuta ea "C".
(a) Liphetho tsa Fail-Safe Switched Power:
Bakeng sa ts'ebetso ea Fail-Safe, hokela kenyeletso e ntle (+) ea lisebelisoa tsa taolo ea phihlello ho terminal
e tšoailoe [NC]. Hokela molaetsa o fosahetseng (–) oa lisebelisoa tsa taolo ea phihlello ho terminal e tšoailoeng [COM].
(b) Liphetho tsa Fail-Secure Switched Power:
Bakeng sa ts'ebetso e Sireletsehileng e Hloekileng, hokela kenyeletso e ntle (+) ea lisebelisoa tsa taolo ea phihlello ho terminal
e tšoailoe [NO]. Hokela molaetsa o fosahetseng (–) oa lisebelisoa tsa taolo ea phihlello ho terminal e tšoailoeng [COM].
(c) Liphetho tsa Foromo ea "C":
Ha liphetho tsa "C" li lakatseha, li-fuse tse tsamaellanang (1-8) tsa boto e 'ngoe le e 'ngoe ea ACM8 li tlameha ho etsoa.
tlosoe. - Liphetho tsa Matla a ACM8 (tse sa fetoloang):
Hokela lisebelisoa tsa taolo ea phihlello tse hlokang matla a sa khaotseng ho litheminale tse tšoailoeng [C] positive (+) le [COM] negative (–). Lintho tse hlahisoang li ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad, joalo-joalo.
Liphetho tsa eFlow (tse sa fetoloang):
Bakeng sa khokahanyo ea lisebelisoa tse thusang, tlhahiso ena e ke ke ea angoa ke Low Power Disconnect kapa Fire Alarm Interface. Hokela sesebelisoa ho li-terminals tse tšoailoeng [+ AUX -] (Setšoantšo sa 3, leqephe la 10). - Likhetho tsa ho kenya letsoho (Setšoantšo sa 2, leqepheng la 9):
(a) Hangata Bula [NO] trigger ea ho kenya:
Litlhahiso tsa 1-8 li kentsoe tšebetsong ka mokhoa o tloaelehileng oa ho kenya sekontiri se bulehileng kapa se bulehileng. Hokela liphetho tsa phanele ea phihlello, li-keypad, likonopo tse tobetsang, li-PIR tsa REX, joalo-joalo ho li-terminals tse tšoailoeng [IN] le [GND].
(b) Open Collector Sink inputs:
Hokela setsi sa taolo ea phihlello se bulehileng se bokellang se nepahetseng (+) ho li-terminals tse tšoailoeng [IN] le negative (–) ho litheminale tse tšoailoeng [GND]. - ACM8 Fire Alarm Interface dikgetho (Setšoantšo sa 5-9, leqepheng la 12):
[NC] kapa ka tloaelo ho buloa [NO] ho kenya letsoho ho tsoa phanele ea taolo ea alamo ea mollo kapa keno e khutlisetsang polarity ho tsoa ho potoloho ea matšoao a FACP e tla ama liphetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa phallo, tima switch(es) e tsamaellanang le eona [SW1-SW8] HO TOMA botong e 'ngoe le e 'ngoe ea ACM8. Ho tima FACP hakoa bakeng sa tlhahiso bulela switch(es) e tsamaellanang [SW1-SW8] ON botong ka 'ngoe ea ACM8.
(a) Ka tloaelo Bula [NO] ho kenya:
Bakeng sa li-hook-ups tse sa tsitsang sheba setšoantšo sa 6, leq. 12. Bakeng sa ho latching hook-up sheba setšoantšo sa 7, leq. 12.
(b) Hangata ho koetsoe [NC]:
Bakeng sa li-hook-ups tse sa tsitsang sheba setšoantšo sa 8, leq. 12. Bakeng sa ho latching hook-up sheba setšoantšo sa 9, leq. 12.
(c) Sehlomathisi se kenyang Potoloho ea Letšoao la FACP:
Hokela positive (+) le negative (–) ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP –]. Hokela FACP EOL ho litheminale tse tšoailoeng [+ RET -] (polarity e bonts'itsoe maemong a alamo). Jumper e haufi le TRG LED e tlameha ho khaoloa (setšoantšo sa 6, leqephe la 12). - FACP Dry form "C" tlhahiso (Ha e hlahlojoe ke UL) (Setšoantšo sa 2b, leqepheng la 9):
Mabitso a mofuta oa FACP "C" a ka sebelisoa ho qala lisebelisoa tsa ho tlaleha kapa ho fana ka matšoao. Mabitso ana a bulela alamo ea mollo e kenyang liboto tsa ACM8. - Lihokelo tsa Battery tse emeng (Setšoantšo sa 3, leqepheng la 10):
Bakeng sa lits'ebetso tsa US Access Control li-betri lia ikhethela. Libetri lia hlokahala bakeng sa ho kenya lisebelisoa tsa Canada (ULC-S319). Ha libetri li sa sebelisoe, tahlehelo ea AC e tla fella ka tahlehelo ea matla a tlhahisotage. Ha tšebeliso ea libeteri tse emeng li lakatseha, e tlameha ho ba acid ea lead kapa mofuta oa gel. Hokela betri ho li-terminals tse tšoailoeng [- BAT +] (Setšoantšo sa 3, leqephe la 10). Sebelisa libeteri tse peli (2) tsa 12VDC tse hokahaneng letotong bakeng sa ts'ebetso ea 24VDC (li-lead tsa betri li kenyelelitsoe). Sebelisa libeteri - li-betri tsa Castle CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) libeteri kapa libeteri tse amoheloang ke UL BAZR2 le BAZR8 tsa lintlha tse nepahetseng. - Liphetho tsa Battery le AC Supervision (Setšoantšo sa 3, leqepheng la 10):
Hoa hlokahala ho hokela lisebelisoa tsa tlaleho ea mathata a bolaoli ho liphetho tse tšoailoeng [AC Fail, BAT Fail] tse tšoailoeng [NC, C, NO] ho lisebelisoa tse loketseng tsa tsebiso. Sebelisa 22 AWG ho isa ho 18 AWG bakeng sa tlaleho ea AC Fail & Low/No Bettery. - Ho liehisa tlaleho ea AC ka lihora tse 2., seta switch ea DIP [AC Delay] sebakeng sa OFF. (Setšoantšo sa 3, leqephe la 10).
Ho liehisa tlaleho ea AC bakeng sa 1 min., Beha sesebelisoa sa DIP [AC Delay] sebakeng sa ON (Setšoantšo sa 3, leqephe la 10). - Khaola Alamo ea Mollo (Setšoantšo sa 3, leqepheng la 10):
Ho bulela Mollo Ho Khaoha ha Alamo ea Mollo, seta switjha ea DIP [Shutdown] ho ea sebakeng sa ON.
Ho tima Alamo ea Mollo Hakolla, seta switjha ea DIP [Shutdown] ho ea ho OFF. - Ho kenngoa ha TampFetola (Setšoantšo sa 3a, leqepheng la 10):
Thaba ea UL Listed tamper switch (Altronix ea mohlala TS112 kapa e lekanang le eona) ka holimo ho sebaka se kampetsoeng. Tsamaisa tamper switjha bracket moeling oa sebaka se koaletsoeng hoo e ka bang 2 "ho tloha ka lehlakoreng le letona (setšoantšo sa 3a, leqephe la 10).
Kopanya tamper switch wiring ho ea ho Access Control Panel kapa sesebelisoa se nepahetseng sa tlaleho se Lethathameng la UL. Ho kenya letshwao la alamo tshebetsong bula lemati la kampereho. - Lisebelisoa tse ngata tsa motlakase (Setšoantšo sa 2, leqephe la 9) (Ha e hlahlojoe ke UL):
Ha u sebelisa matla a eketsehileng A thathamisitsoeng ka ntle, li-jumpers J1 le J2 tse teng ka lebokoseng la ACM8 le lumellanang le tlameha ho khaoloa (setšoantšo sa 2c, pg. 9 & Fig. 5, pg. 12). Hokela phepelo ea motlakase ea kantle e Lekanyelitsoeng ea ho fihlella e lekanyelitsoeng ho litheminale tse tšoailoeng [- Control +] (Litheminale tsena li bapetsoe le litheminale tsa [- Power +]). Ha u sebelisa lisebelisoa tsa motlakase tsa DC, polarity e tlameha ho hlokomeloa. Ha u sebelisa lisebelisoa tsa motlakase tsa AC, polarity ha ea lokela ho hlokomeloa (setšoantšo sa 2d, leqephe la 9.) Likhokahanyo tsohle tsa marang-rang li tlameha ho etsoa ho sebelisa gauge e loketseng ea CM kapa FPL jacketed terata (kapa e tšoanang le sebaka sa eona) (Fig. 4a, pg. 11) .
Tlhokomelo:
Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng ka tsela e latelang:
| Tlhokomelo ea FACP: | Ho netefatsa khokahano e nepahetseng le ts'ebetso ea Fire Alarm disconnect hookup. Ka kopo latela mokhoa o nepahetseng ka tlase: |
| Ka tloaelo Bula Kenyo: | Ho beha sebaka se sekhutšoane lipakeng tsa litheminale tse tšoailoeng [T] le [+ INP] ho tla etsa hore ho Khaolloe Alamo ea Mollo. Tlosa e khutšoanyane ho tsosolosa. |
| Kenyelletso e Tloaelehileng: | Ho tlosa terata ho theminale e tšoailoeng [INP –] ho tla bulela Thibelo ea Alarm ea Mollo. Tlosa terata sebakeng sa theminale e tšoailoeng [INP -] ho seta botjha. |
| Kenyo ya Potoloho ya Letshwao la FACP: | Hoa hlokahala ho qala Sisteme ea Alamo ea Mollo. Maemong ohle a kaholimo ho botala, TRG LED ea ACM8s e tla khantša. Liphetho tsohle tse khethiloeng bakeng sa The fire Alarm Disconnect e tla kenya tšebetsong lisebelisoa tse notlelang tse notlelang. |
Hlokomela: Liphetho tsohle [OUT 1] – [OUT 8] li tlameha ho ba boemong bo tloaelehileng (ho felloa ke matla) pele ho tlhahlobo. Ha yuniti e lokiselitsoe ka tloaelo Open (setšoantšo sa 8, leqephe la 12) kapa se koetsoe ka tloaelo (setšoantšo sa 10, leqepheng la 12) latching, hoa hlokahala ho tsosolosa Mollo oa Alarm Disconnect ka ho kenya konopo ea Tloaelo e Tloaelehileng reset.
| Khumo Voltage Teko: | Tlas'a maemo a tloaelehileng a mojaro, molumo oa DC oa voltage lokela ho hlahlojwa bakeng sa vol e nepahetsengtage level (sheba MaximalF series Configuration Chart, pg. 3). |
| Teko ea Betri: | Tlas'a maemo a tloaelehileng a mojaro, hlahloba hore na betri e tjhajiloe ka botlalo, hlahloba molumo o boletsoengtage liteisheneng tsa betri le liteisheneng tsa boto tse tšoailoeng [+ BAT –] ho netefatsa hore ha ho na ho khaoha lithapong tsa ho hokela betri. |
Hlokomela: Boholo ba tefiso ea hajoale ke 1.54A. Bophelo ba betri bo lebelletsoeng ke lilemo tse 5; leha ho le joalo, ho kgothaletswa ho fetola dibetri nakong ya dilemo tse 4 kapa ka tlase ha ho hlokahala.
Tlhahlobo ea LED ea Boto ea Phepelo ea Matla:
| Khubelu (DC) | Botala (AC/AC1) | Boemo ba Phepelo ea Matla |
| ON | ON | Boemo bo tloaelehileng ba ts'ebetso. |
| ON | TLOA | Tahlehelo ea AC. Betri ea standby e fana ka matla. |
| TLOA | ON | Ha ho tlhahiso ea DC. |
| TLOA | TLOA | Tahlehelo ea AC. Betri e emeng kapa e sa sebetseng. Ha ho tlhahiso ea DC. |
| Khubelu (Bat) | Boemo ba Battery |
| ON | Boemo bo tloaelehileng ba ts'ebetso. |
| TLOA | Betri e hlolehile/betri e tlase. |
Fumana Tlhahlobo ea LED ea Taolo ea Matla:
| LED | ON | TLOA |
| LED 1- LED 8 (Khubelu) | Li-relay tse hlahisoang li matlafalitsoe. | Li-relay li feletsoe ke matla. |
| Trg (Tala) | Ho kenya FACP (boemo ba alamo). | FACP e tloaelehileng (boemo boo e seng alamo). |
Litlhaloso tsa Battery tsa Boto ea Phepelo ea Matla:
| Betri | Boholo1F | Maxima133F | Maxima155F, Maxima175F, le Maxima177F |
| 7AI-I | 30 mets./4A* | 10 mets./6A | 5 mets./1 OA |
| 12A1-I | 35 mets./4A* | 30 mets./6A* | 30 mets./1 OA* |
| 40A1-1 | Ho feta lihora tse 4/4A* | Ho feta lihora tse 4/6A* | Ho feta lihora tse 2/10A* |
| 65AI-I | Ho feta lihora tse 4/4A* | Ho feta lihora tse 4/6A* | Ho feta lihora tse 4/10A* |
* Ke litlhophiso tsena feela tse ka sebelisoang lits'ebetsong tsa ULC-S319.
Boitsebiso ba Boto ea Phepelo ea Matla:
| Terminal Taba | Mosebetsi/Tlhaloso |
| L, G, N | Hokela 120VAC 60Hz ho li-terminals tsena: L ho ea ho chesa, N ho se nke lehlakore. Se ke oa sebelisa matšoao a ho qetela [G]. |
| + DC - | Feme e hokahaneng le boto ea ACM8. |
| Hlahisa EOL Tlhokomelo |
Sebopeho sa Alarm ea Mollo se kenya letsoho ho tsoa ho nako e khuts'oane kapa FACP. Lisebelisoa tsa trigger li ka buloa ka tloaelo, hangata li koaloa ho tloha ho FACP output circuit (Sehlopha sa 2 se fokolang matla) (Setšoantšo sa 3, leqephe la 10). |
| CHE, GND RETS'ELISITSOE |
FACP segokanyimmediamentsi sa sebolokigolo latching kapa bao e seng latching (Sehlopha sa 2 matla a fokolang) (Setšoantšo sa 3, leqephe la 10). |
| + AUX - | Motlatsi oa Sehlopha sa 2 se hlahisoang ke matla a fokolang 0 1 A (e sa fetoheng) (setšoantšo sa 3, leqephe la 10). |
| AC HLOLA NC, C, Che |
E bontsha tahlehelo ya matla a AC, mohlala, hokela sesebedisweng se utlwahalang kapa phanele ya alamo. Hangata relay e matlafatsoa ha matla a AC a le teng. Tekanyetso ea ho ikopanya 1A 0 30VDC (Sehlopha sa 2 se nang le matla a fokolang) (setšoantšo sa 3, leqephe la 10). |
| HLOKOMELA KHABANE NC, C, Che |
E bontsha boemo ba betri e tlase, mohlala, hokela phanele ya alamo. Hangata relay e matlafatsoa ha matla a DC a le teng. Tlhaloso ea ho ikopanya 1A 0 30VDC. Betri e tlositsoeng e tlalehoa nakong ea metsotso e 5. Ho tsosolosoa ha betri ho tlalehoa ka hare ho motsotso oa 1 (Sehlopha sa 2 sa matla a fokolang) (Setšoantšo sa 3, leqephe la 10). |
| + BAT - | Lihokelo tsa betri tse emeng. Tefiso e phahameng ea hona joale 1.54A (e seng matla-e lekanyelitsoeng) (Setšoantšo sa 3, leqephe la 10). |
Fumana Boitsebiso ba Terminal Controller Power:
| Terminal Taba | Mosebetsi/Tlhaloso |
| - Matla + | 12VDC kapa 24VDC ho tloha phepelong ea motlakase / tjhaja (fektheri e hoketsoeng). Li-terminals tsena li bapisoa le li-terminals tsa [— Control +]. |
| - Taolo + | Litheminale tsena li bapisoa le li-terminals tsa [- Power +]. Li-terminals tsena li ka hokeloa ho phepelo ea motlakase e fumanehang kantle e Lekanyelitsoeng ho fana ka matla a ts'ebetso a ikhethileng bakeng sa lisebelisoa (Ha e hlahlojoe ke UL). Li-Jumpers J1 le J2 li tlameha ho tlosoa. |
| KENYA YA TRIGGER 1- INPUT 8 IN, GND | Ho tsoa ho tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa pokello ea li-tank trigger (kopo ea ho tsoa likonopo, lipara tsa ho tsoa, joalo-joalo) |
| TLHALOSO 1- PHELETSO 8 NC, C, NO, COM |
12VDC ho 24VDC trigger controlled outputs. Boholo ba mojaro ka tlhahiso ke 2.5A. |
| Maxima111F: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A kapa P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4DDC P/S 3.6 - 1-10.1VDC @ 13.2A le P/S 3.3 - 2-20.28VDC @ 26.4A. | |
| Maxima133F: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A kapa P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4DDC P/S 5.6 - 1-10.0VDC @ 13.2A le P/S 5.3 - 2-20.28VDC @ 26.4A. | |
| Maxima155F: P/S 1 - 10.03-13.2VDC @ 9.3A le P/S 2 - 10.03-13.2VDC @ 9.3A. | |
| Maxima175F: P/S 1 - 10.03-13.2VDC @ 9.3A le P/S 2 - 20.17-26.4VDC @ 9.6A. | |
| Maxima177F: P/S 1 - 20.17-26.4VDC @ 9.6A le P/S 2 - 20.17-26.4VDC @ 9.6A. | |
| Fail-Safe [NC positive (+) & COM Negative (—)], Fail-Sireletsehile [NO positive (+) & COM Negative (—)], Auxiliary output [C positive (+) & COM Negative (—)] ( Ha u sebelisa lisebelisoa tsa motlakase tsa AC polarity ha ea lokela ho hlokomeloa), NC, C, NO e fetolelang ho foromo e omileng "C" 5A 24VACNDC e lekanyelitse liphello tse omeletseng ha li-fuse li tlosoa. Mabitso a hlaha maemong a sa qaleng. | |
| FACP INTERFACE T, + INNPUT - | Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger li ka buloa ka tloaelo, hangata li koetsoe ho tloha ho FACP signaling circuit output (Figs. 5-9, pg. 12). |
| FACP INTERFACE NC, C, NO | Foromo "C" relay contact rated @ 1A 28VDC bakeng sa tlaleho ea alamo (ha e hlahlojoe ke UL). |
Sephetho sa Boto ea Phepelo ea Matla Voltage Litlhophiso:
Setšoantšo se Tloaelehileng sa Selaoli sa Motlakase (bakeng sa ACM8 ka 'ngoe):
Setšoantšo sa 3 - Maximal F Series
TLHOKOMELO: Ha boto ea phepelo ea matla e behiloe bakeng sa 12VDC sebelisa betri e le 'ngoe feela (1) 12VDC e emeng.
Boloka lithapo tse lekanyelitsoeng matla li arohane le tse se nang matla.
Sebelisa sebaka sa bonyane 0.25 ″.
12AH Libetri tse ka chachang hape ke libeteri tse kholo ka ho fetisisa tse ka kenang ka har'a sebaka sena se kampetsoeng. Sebaka sa betri sa kantle se thathamisitsoeng ka UL se tlameha ho sebelisoa ha u sebelisa libeteri tsa 40AH kapa 65AH.
Litlhokahalo tsa Wiring tse lekantsoeng ke NEC:
Wiring ea potoloho e se nang matla le e se nang matla e tlameha ho lula e arohane ka khabinete. Lithapo tsohle tsa potoloho tse nang le matla a fokolang li tlameha ho lula bonyane 0.25 ″ hole le lithapo life kapa life tse se nang matla a fokolang. Ho feta moo, lithapo tsohle tse nang le matla a fokolang a motlakase le li-circuits tse se nang matla li tlameha ho kena le ho tsoa ka har'a khabinete ka likhoele tse fapaneng.
E 'ngoe ea mohlala o joaloampsena se bontšoa ka tlase. Sesebelisoa sa hau se ikhethileng se ka hloka hore ho sebelisoe li-conduit knockouts tse fapaneng. Ho ka sebelisoa likotopo life kapa life tsa conduit. Bakeng sa lisebelisoa tse lekanyelitsoeng ho sebelisa motlakase ke boikhethelo. Likhokelo tsohle tsa methapo li tlameha ho etsoa ho sebelisa gauge e loketseng ea CM kapa FPL jacket terata (kapa e tšoanang le sebaka sa eona).
Sebaka sa boikhethelo sa Betri se thathamisitsoeng ho UL se tlameha ho kengoa haufi le phepelo ea motlakase ka mekhoa ea mehala ea Sehlopha sa 1.
Bakeng sa lisebelisoa tsa Canada sebelisa wiring e sirelelitsoeng bakeng sa likhokahano tsohle.
Hlokomela: Sheba setšoantšo sa ho tšoara terata ka tlase bakeng sa mokhoa o nepahetseng oa ho kenya terata ea jacket ea CM kapa FPL (Setšoantšo sa 4a).
FACP Hook-Up Diagrams:
| Setšoantšo sa 5 Ho hokahana ha boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase (E sebetsa feela ho Maximal11F, ha e ea hlahlojoa ke UL): | Setšoantšo sa 6 Polarity reversal input ho tloha FACP signaling circuit output (polarity is e hlalositsoe ka boemo ba alamo): |
 |
 |
| Setšoantšo sa 7 Ka tloaelo Bulehile: Non-Latching FACP kenya letsoho: | Setšoantšo sa 8 Ka tloaelo Bula FACP Latching trigger input ka reset: |
 |
 |
| Setšoantšo sa 9 se Koalehile ka tloaelo: Ho kenya FACP e sa Lateng: | Setšoantšo sa 10 se koetsoe ka tloaelo: Latching FACP trigger input with reset: |
 |
 |
Lintlha:…..
Mekhahlelo ea Kakaretso (H x W x D e batla e lekanyelitsoe):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)
Setšoantšo sa MDFF052319
Khampani ea ho Kenya: ………..
Lebitso la Rep. Service:………………….
Aterese: ………………..
# Mohala:…….
Maximal11F/33F/55F/75F/77F Series Access Power Controllers (Fused) Tlhophiso ea Tataiso ea Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056
websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIMaximal11F/33F/55F/75F/77F Series
H11U
EFlow Power Supply/Charger e ka laoloa le ho shejoa ha u ntse u
| Ho tlaleha Matla / Tlhahlobo ho tsoa kae kapa kae holim'a Marang-rang…
LINQ2 - Network Communication Module
LINQ2 e fana ka phihlello e hole ea IP ho data ea nako ea nnete ho tsoa ho phepelo ea motlakase ea eFlow / tjhaja ho thusa ho boloka litsamaiso li sebetsa ka maemo a nepahetseng. E thusa ho kenya le ho kenya ka potlako le ho le bonolo, ho fokotsa nako ea ho fokotsa tsamaiso, le ho felisa mehala e sa hlokahaleng ea litšebeletso, e thusang ho fokotsa Kakaretso ea Litšenyehelo tsa Bolaoli (TCO) - hammoho le ho theha mohloli o mocha oa Recurring Monthly Revenue (RMR).
Likaroloana:
- UL e thathamisitsoe ho US le Canada.
- Taolo ea lehae kapa e hole ea ho fihla ho (2) tse peli tsa Altronix eFlow power output ka LAN le/kapa WAN.
- Hlahloba tlhahlobo ea nako ea sebele: DC output voltage, tlhahiso ea hona joale, AC & boemo ba betri / tšebeletso, phetoho ea boemo ba ho kenya, phetoho ea boemo ba tlhahiso, le mocheso oa yuniti.
- Taolo ea phihlello le taolo ea basebelisi: Thibela ho bala / ho ngola, Beha basebelisi mehloling e itseng
- Tse peli (2) tsa marang-rang tse kenyelletsoeng tse laoloang Foromo ea "C" Relays.
- Litharollo tse tharo (3) tsa ho kenya lenaneong: Laola li-relay le lisebelisoa tsa motlakase ka mehloli ea kantle ea hardware.
- Litsebiso tsa lengolo-tsoibila le Windows Dashboard
- Lethathamo la liketsahalo le latela nalane.
- Secure Socket Layer (SSL).
- E ka rarolloa ka USB kapa web sebatli - se kenyelletsa software e sebetsang le thapo ea USB ea 6 ft.
LINQ2 E beha ka hare ho Sebaka sefe kapa sefe sa MaximalF
Litokomane / Lisebelisoa
 |
Altronix Maximal F Series Batsamaisi ba Matla a Mabeli a Phepelo ea Matla [pdf] Tlhophiso Tataiso Maximal F Series Dual Power Supply Access Controllers, Maximal F Series, Dual Power Supply Access Controllers, Power Supply Access Power Controllers, Access Power Controllers, Power Controllers, Maximal11F, Maximal33F, Maximal55F, Maximal75F, Maximal77F |
