ALLEN le HEATH MIDI Taolo ea Mosebelisi

Selelekela

Taolo ea Allen & Heath MIDI e sebetsa ka ho theha boema-kepe ba MIDI ho Mac OS kapa Windows ebe e tsamaisa khokahano ea MIDI lipakeng tsa likou tsena tse fumanehang le motsoaki ka phetolelo kapa ntle le eona.

Sena se nolofalletsa li-mixer tsa Allen & Heath tse tsamaellanang ho laola software ea DAW ho Mac OS kapa Windows ka ho etsisa liprothokholo tse tsebahalang tsa HUI kapa Mackie Control.

E ka sebelisoa ho romella le ho amohela melaetsa ea taolo ea MIDI ka kotloloho le ho tsoa mokokotlong oa motsoako oa dijithale bakeng sa taolo e hole ea ho kopanya liparamente, liphetoho tsa sebaka le mesebetsi e meng.

Li-mixer tse tsamaellanang li romella le ho araba melaetsa ea MIDI joalo ka ha ho hlalositsoe litokomaneng tsa MIDI Protocol bakeng sa mofuta o mong le o mong, tse fumanehang bakeng sa ho khoasolla ho tsoa ho. www.ohole-ng.com.

Taolo e nolofalitsoeng ea liparamethara tse atileng haholo tsa li-mixer tse nang le melaetsa ea MIDI CC ho tsoa komporong le eona e ka khoneha ka likhetho tsa 'CC Translator'.

Mabapi le mofuta ona (V2.20)

• Tšehetso bakeng sa Qu-5/6/7
• E tsamaellana dLive MixRack le dLive Surface dikgetho

Sistimi ea ts'ebetso e tšehelitsoeng

• Windows 10, Windows 11.
• macOS 10.14 Mojave, 10.15 Catalina, 11 Big Sur, 12 Monterey, 13 Ventura, 14 Sonoma, 15 Sequoia

Ho theha likou tsa MIDI tse fumanehang

li-port tsa MIDI li etsoa nako le nako Taolo ea Allen & Heath MIDI e qala mme neng kapa neng ha maemo a protocol a fetoloa.

Ka hona, ho etsa bonnete ba hore DAW ea hau kapa ts'ebeliso efe kapa efe e hlokomela likou tsena ka nepo, ho molemo ho theha motsoako oa hau le Taolo ea MIDI pele o qala DAW ea hau kapa sesebelisoa sefe kapa sefe.

Sebelisa haufi le khokahano ea USB e otlolohileng

CQ, Qu le SQ li-mixer li na le sebopeho sa USB audio/MIDI se hahelletsoeng ka hare. Lehlakore la MIDI la sena le ka hokahanngoa le Taolo ea Allen & Heath MIDI, empa sena se tla bolela hore DAW efe kapa efe kapa ts'ebeliso e ngoe komporong e tla ba le phihlello ea boema-kepe bo tobileng (USB-B) MIDI le likou life kapa life tse fumanehang ka nako e le 'ngoe.

Ka hona, ho qoba mathata ha u sebelisa Taolo ea Allen & Heath MIDI molemong oa Taolo ea DAW, ho molemo ho tima khokahano e tobileng ea USB MIDI ho software ea hau moo ho khonehang. Sena se tla netefatsa hore ke melaetsa e fetoletsoeng feela e tsoang likoung tse fumanehang e amoheloang le ho sebelisoa.

Lokisa Taolo ea Allen & Heath MIDI

Khoasolla Taolo ea Allen & Heath MIDI ho tloha www.ohole-ng.com le ho e kenya khomphuteng ya hao.

Qala Taolo ea Allen & Heath MIDI e tla bula le ho sebetsa joalo ka mosebetsi oa bokamorao. Tobetsa ka ho le letona ho lets'oao le ka har'a terei ea sistimi (Windows) kapa tobetsa ka ho le letona / ho laola, tobetsa aekhoneng e bareng ea menyu (Mac) ebe o tobetsa ho Bontša Likhetho ka har'a menu ho fumana phanele ea likhetho.

Motsoaki - Khetha mofuta oa motsoako / sebaka seo u hokelang ho sona.

Setsi sa MIDI - Sena se lokela ho tsamaisana le kanale ea MIDI ea motsoako ka boeona, kapa bakeng sa ts'ebeliso ea holim'a metsi, mocha oa DAW Control MIDI. Bakeng sa mohlalaample, ka ho sa feleng, kanale ea Qu MIDI e 1 le kanale ea Qu DAW Control MIDI e 2.

Protocol - Khetha protocol ho khetha hore na phetolelo ea etsoa.

• Taolo ea HUI/Mackie - E fetolela melaetsa ea MIDI ho tsoa ho motsoako ho etsisa sebaka sa taolo.
• Mackie Control (Standard/Alt Display) - Khetho ena e fumaneha bakeng sa SQ le Qu-5/6/7, e ka bonts'ang mabitso a kanale libonong tsa LCD. Protocol ea taolo ea Mackie e lumella mela e 'meli ea mongolo, kahoo likhetho tsena li fetola feela hore na ke mola ofe o hlahang.
• MIDI Thru - Melaetsa eohle e fetisetsoa le ho tsoa ho motsoako ntle le phetolelo. Sebelisa sena ho laola motsoako ho latela protocol ea eona ea MIDI, kapa ho fumana tlhahiso e tobileng ea MIDI ho tsoa ho likhoele tsa MIDI. Sena se lokela ho sebelisoa hape bakeng sa liphetoho tse bonolo tsa lenaneo/sebaka le ho fumana tlhahiso ea MIDI ho tsoa ho SoftKeys kapa Soft Rotaries.
• CC Mofetoleli – E fetolela melaetsa e bonolo ea MIDI Control Change (CC) le Note On/Off ho tloha komporong ho ea ho melaetsa ea NRPN bakeng sa taolo ea li-fader le li-audio tsa mochini o kopanyang.

Khokahano - Khetha MIDI Ports bakeng sa khokahano ea USB ho motsoako (CQ, Qu, SQ), TCP / IP bakeng sa khokahano ea marang-rang kapa Sireletsehile TCP / IP bakeng sa khokahano e sireletsehileng ea marang-rang.

• Boema-kepe ba MIDI - Khetha likou tsa Input le Output tsa MIDI tse tla sebelisoa, tsena e ka ba ka sebopeho sa MIDI kapa khokahano e tobileng ea USB ho motsoako (CQ, Qu, SQ), bakeng sa ex.ample Qu-16 MIDI Out le Qu-16 MIDI In.
• TCP/IP or Sireletsa TCP / IP - Khetha motsoako ho tsoa lebokoseng le theoha kapa u khethe Tloaelo ebe u thaepa atereseng ea IP ea motsoako, ebe u tšoaea lebokose la ho hlahloba Connect.

Bakeng sa khokahano ea marang-rang, etsa bonnete ba hore komporo ea hau le mixer li setiloe ho liaterese tse tsamaellanang tsa IP ka har'a subnet e tšoanang.

Lokisa motsoako oa hau hore o sebelisoe joalo ka sebaka sa taolo sa DAW

Qu-16/24/32/Pac/SB (firmware V1.2 kapa ho feta)
The Custom Layer e ka tlatsoa ka likhoele tsa MIDI tse abeloang ka bo eona ka melaetsa e nepahetseng ea taolo bakeng sa mohala o mong le o mong oa mocha.

• Eya ho Seta > Taolo > Layer e tloahelehileng ebe u seta li-fader strips tse hlokahalang ho MIDI ka ho khetha pele ebe u tsamaisetsa skrineng sa rotary.
• Sebelisa le Fn '+1' senotlolo sa ho abela fader e latelang ka tatellano.
• Beha mocha oa MIDI ka har'a motsoako Seta > Taolo > MIDI skrineng.
• Haeba ho hlokahala, beha SoftKeys ho li-control tsa lipalangoang tsa MMC kapa DAW Bank Up/Down in Seta > Taolo > SoftKeys.

dLive (firmware V1.5 kapa ho feta), Tšebelisano (firmware V1.1 kapa ho feta), SQ (firmware V1.2 kapa ho feta), Qu-5/6/7 (firmware V1.1 kapa ho feta), GLD (firmware V1.4 kapa ho feta)
Ho fihla ho li-strip tse 32 tsa MIDI li ka abeloa ka bolokolohi lithapo tsa liteishene.

• Hula 'me u lihele likhoele tsa MIDI ho Libanka le Li-Layers tseo u li batlang Bokaholimo> Taolo> Kabelo ea Strip (dLive/Avantis), Seta > Surface > Strip Assign (SQ), SETUP > Strip Assign (Qu-5/6/7), Seta > Control > Strip Assign (GLD).
  Le hoja li-strip tsa MIDI li ka abeloa ka bolokolohi, bakeng sa ts'ebetso e utloahalang e le sebaka sa taolo, li lokela ho eketsoa ka li-block tsa 8 le ka tatellano (sheba 'Palo ea likou le libaka tsa taolo ea sebele' ka tlase).
• Beha mocha oa MIDI ho kena Utility > Control > MIDI (dLive/Tšebelisano), Utility > Kakaretso > MIDI (SQ/Qu-5/6/7), Seta > Taolo > MIDI (GLD) 'me u hlokomele mocha oa DAW Control MIDI.
• On dLive le GLD, sete ea melaetsa ea MIDI bakeng sa strip e 'ngoe le e' ngoe e ka etsoa ho latela litlhoko tsa mosebelisi. Tlohela litekanyetso tsa kamehla hore li sebelisoe le DAW Control. U ka khutlisa melaetsa ea MIDI ea kamehla ea feme ka ho hopola Seta Sets'oants'o sa MIDI Pontšong efe kapa efe ea template.
  Ka Tšebelisano the Seta Litlhophiso bocha Scene e ka sebelisoa hammoho le li-filters tse hopolang ho fihlela sephetho se tšoanang.
• Sheba Litataiso tsa Reference tsa mixer bakeng sa tlhaiso-leseling e batsi mabapi le ho seta li-mixer ho kenyelletsa le kabelo ea SoftKey.

Palo ea likou le 'libaka tsa taolo tse nepahetseng'

Ha u sebelisa "control surface protocol" Taolo ea Allen & Heath MIDI e tla theha 4 virtual input, le 4 virtual output ports e ngotsoeng DAW Control MIDI 1-4.

Lebaka ke hobane libaka tsa taolo tse etsisoang li na le li-fader tse 8 feela, ho bolelang hore hoa khoneha ho sebelisa li-fader tse 8 ho tsoa ho motsoako bakeng sa 'sebaka se seng le se seng sa taolo'.

Ho lumella li-fader tsohle tsa 'mele ho sebelisoa (ho fihla ho 32 ho Qu-32 bakeng sa mohlalaample) ka hona, ho tlameha ho hlophisoa libaka tse 4 tse arohaneng tsa taolo ho DAW kapa ts'ebeliso e 'ngoe, e' ngoe le e 'ngoe e sebelisa boema-kepe bo arohaneng.

Hlophisa DAW/software ea hau hore e sebelisoe ka sebaka sa taolo

Kopanya mixer ea hau 'me u e hlophise Likhetho tsa MIDI Control pele o bula DAW ea hau.

Latela litaelo tse tobileng ho DAW ea hau maqepheng a latelang ho abela Faders, PAFL, Sel/Mix le Semumu linotlolo ho tloha ho li-mixer MIDI strips ho ea ho Levels, Solo, Khetha le Litaolo ho DAW ea hau. Sena se tla boela se abele taolo ea lipalangoang tsa MMC ho tloha ho motsoako ho ea ho taolo e tsamaellanang ea DAW. Ka ho abela Bank Up/Down mesebetsi ho SoftKeys ea mixer, fader bank navigation le eona e ka khonahala.

DAW efe kapa efe kapa sesebelisoa se nang le ts'ehetso ea taolo ea MCU kapa HUI empa e sa boleloang mona le eona e lokela ho sebetsa. Latela feela litaelo tse tloaelehileng tsa ho seta holim'a sesebelisoa sa hau 'me u hokahane le maemo a 4 a taolo u sebelisa likou tse entsoeng ke Taolo ea Allen & Heath MIDI.

Harrison LiveTrax

1. Khetha protocol ea Mackie Control ho Likhetho tsa MIDI Control le ho qala LiveTrax.
2. Bula fensetere ea Preferences / Control Surfaces.
3. Tšoaea 'me u khethe khetho ea Mackie.
4. Tobetsa Show Protocol Settings ebe u khetha mofuta oa sesebelisoa:
   a. Mackie Control bakeng sa 8 faders / 1 emulated holim'a metsi.
   b. Taolo ea Mackie e nang le Extender e le 'ngoe bakeng sa li-fader tse 16 / libaka tse 2 tse etsisitsoeng.
   c. Taolo ea Mackie e nang le li-Extenders tse peli bakeng sa li-fader tse 24 / libaka tse 3 tse etsisitsoeng.
5. Abela ho romela le ho amohela bakeng sa Main surface le Extenders. E latelang exampLe nka hore ho sebelisoa likhoele tse 16 tsa MIDI:
   a. Sebaka se ka sehloohong sebakeng sa 1 se romela / se amohela ka = DAW Control MIDI 1.
   b. Extender sebakeng sa 2 e romela/e amohela ka = DAW Control MIDI 2.
6. Koala lifensetere tsa Litlhophiso tsa Tsamaiso ea Tsamaiso le Likhetho.

Bokaholimo ba li-fader tse 24/3 tse etsisitsoeng li ka sebelisoa ka LiveTrax.

Lisebelisoa tsa Avid Pro

1. Khetha protocol ea HUI ho Likhetho tsa MIDI Control le ho qala Pro Tools.
   2. Eya ho Setup / MIDI / Input Devices 'me u nolofalletse likoung tsohle tsa DAW Control MIDI.
   3. Bula fensetere ea Setup / Peripherals ebe u ea ho MIDI Controllers tab.
   4. Etsa sesebelisoa sa HUI bakeng sa boloko e 'ngoe le e' ngoe ea 8 MIDI strips e teng ho mixer 'me u abele likoung tsa MIDI tse lumellanang. E latelang exampLe nka hore ho sebelisoa likhoele tse 16 tsa MIDI:
   a. Moleng oa #1, khetha HUI joalo ka Mofuta le DAW Control MIDI 1 joalo ka Receive From and Romel to port.
   b. Moleng oa #2, khetha HUI joalo ka Mofuta le DAW Control MIDI 2 joalo ka Receive From and Romel to port.
   5. Tlanya OK.

Steinberg Cubase

1. Khetha protocol ea Mackie Control ho Likhetho tsa MIDI Control le ho qala Cubase.
    Ha u sebelisa SQ, khetha Mackie Control (Alt. Display) ho bontša mabitso a pina ka nepo.
2. Bula fensetere ea "Studio / Studio Setup".
3. Theha sesebelisoa sa Taolo ea Mackie bakeng sa boloko e 'ngoe le e' ngoe ea likhoele tse 8 tsa MIDI tse teng ho motsoako 'me u li abele Not Connected pele u abela likou tse tsamaellanang tsa MIDI.

Ela hloko hore sesebelisoa se holimo ka ho fetisisa lethathamong le letšehali se emela boloko bo ka ho le letona ho liteishene tsa MIDI.

a. Tobetsa konopo ea Eketsa Sesebelisoa (+), khetha Mackie Control 'me u behe likou tsa ho kenya le ho tsoa ho tse sa hokahaneng.
b. Tobetsa Etsa kopo.
c. Pheta sena bakeng sa lisebelisoa tse 4 ka kakaretso (32 MIDI strips)
d. Abela likou tsa MIDI tse kenang le tse hlahisoang tsa sesebelisoa ka seng ho likou tsa DAW Control MIDI ka tsela e latelang:

Mokotuli oa Likokoana-hloko

1. Khetha protocol ea Mackie Control ho Likhetho tsa MIDI Control le ho qala Reaper.
2. Bula fensetere ea Likhetho / Likhetho ebe u tobetsa Lisebelisoa tsa MIDI ho tsoa lethathamong le ka letsohong le letšehali.
3. Ho qoba likhohlano tsa melaetsa, etsa bonnete ba hore likou tsohle tsa DAW Control MIDI Input le Output li koetsoe. Haeba ho hlokahala, tobetsa ka ho le letona koung ho fetola boemo ba eona.
4. Khetha Sebaka sa Taolo ho tsoa lethathamong le ka letsohong le letšehali 'me u thehe sesebelisoa sa Taolo ea Mackie bakeng sa boloko bo bong le bo bong ba li-strip tsa 8 MIDI tse teng ho mixer, ebe u abela e' ngoe le e 'ngoe likoung tse tsamaellanang tsa MIDI.
   E latelang exampLe nka hore ho sebelisoa likhoele tse 16 tsa MIDI:
   a. Tobetsa konopo ea Add, khetha Mackie Control Universal surface mode le DAW Control MIDI 1 e le Input and Output port, beha Surface Offset ho 0 'me u fetole boholo ba tweak ho 8, ebe o tobetsa OK.
   b. Tobetsa konopo ea Add hape, ebe u khetha Mackie Control Extender surface mode, DAW Control MIDI 2 e le Input and Output port, beha Surface Offset ho 8 'me u fetole boholo ba tweak ho 8, ebe o tobetsa OK.
    Size tweak e lula e le 8 ka li-offsets tse behiloeng ho: Surface#1 = 0, Surface#2 = 8, Surface#3=16, Surface#4 = 24.
5. Tobetsa OK ho koala fensetere.

Ableton Live

1. Khetha protocol ea Mackie Control ho Likhetho tsa MIDI Control le ho qala Live.
2. Bula fensetere ea Live / Likhetho ebe u ea ho MIDI / Sync tab ya.
3. Khetha MackieControl ka lebokoseng le theohang la Taolo ea #1 ebe u beha DAW Control MIDI 1 joalo ka boema-kepe ba Input le Output.
4. Bakeng sa boloko e 'ngoe le e' ngoe e latelang ea 8 MIDI strips e teng ho mixer, theha sesebelisoa sa Mackie Control Extender 'me u se fe boema-kepe bo lumellanang ba MIDI.
   E latelang exampLe nka hore ho sebelisoa likhoele tse 16 tsa MIDI: Khetha MackieControlXT ka har'a lebokose le theohang la Control Surface #2 ebe u beha DAW Control MIDI 2 joalo ka boema-kepe ba Input le Output.
5. Koala fensetere.

Apple Logic

1. Khetha protocol ea Mackie Control ho Likhetho tsa MIDI Control le ho qala Logic.
2. Bula fensetere ea Logic Pro / Preferences / Control Surfaces / Setup.
3. Theha sesebelisoa sa Mackie Control ebe u se abela boema-kepe ba pele ba MIDI:
   a. Tobetsa Ncha / Kenya, tsamaisetsa fatše, khetha Mackie Designs - Mackie Control - Logic Control ebe o tobetsa Eketsa.
   b. Koala fensetere ebe o tobetsa setšoantšo se ngotsoeng Mackie Control.
   c. Kgetha DAW Control MIDI 1 e le Output and Input Port.
4. Bakeng sa boloko e 'ngoe le e' ngoe e latelang ea likhoele tse 8 tsa MIDI tse fumanehang ho mixer:
   a. Tobetsa Ncha / Kenya hape 'me u khethe Meetso ea Mackie - Mackie Control Extender - Logic Control. Tobetsa OK ha u khothalletsoa.
   b. Koala fensetere ebe o tobetsa setšoantšo sa sesebelisoa se secha (se ngotsoeng Mackie Control Extender, Mackie Control Extender #2 kapa Mackie Control Extender #3)
   c. Kgetha DAW Control MIDI 2, DAW Control MIDI 3 kapa DAW Control MIDI 4 ka ho tatelano e le Output and Input Port, bakeng sa disebediswa tse 4 tse skrineng, se seng le se seng se hokahane le boemakepe ba sona ba MIDI.
   d. Tobetsa 'me u hule holimo / tlase ho lokisa Fader Bank Offset bakeng sa extender e' ngoe le e 'ngoe e le hore ea pele e tlosoe ke li-fader tse 8, ea bobeli ke li-fader tse 16 le tsa boraro ka li-fader tse 24.
5. Hlahloba litlhophiso li tsamaisana le tafole e latelang:
   
6. Koala fensetere ea Setup.
7. Boloka projeke ea hau ho boloka litlhophiso.

CC Translator protocols

Likhetho tsa protocol tsa CC Translator li lumella tšebeliso ea melaetsa e tloaelehileng ea Control Change (CC) bakeng sa taolo ea li-mixer fader le melaetsa ea Note On/Off bakeng sa taolo ea semumu sa motsoako ka likou tsa MIDI. Sena se etsa hore ho be bonolo ho iketsetsa liteishene tsa audio tsa mixer ho tsoa ho DAW, sesebelisoa sa taolo ea pontšo kapa software e 'ngoe.

Melaetsa e latelang e ka sebelisoa le dLive (firmware V1.7 kapa ho feta), Tšebelisano (firmware V1.1 kapa ho feta), SQ (firmware V1.4 kapa ho feta), Qu-5/6/7 (firmware V1.1 kapa ho feta) Qu-16/24/32/Pac/SB (firmware V1.9 kapa ho feta) le CQ (firmware V1.2 kapa ho feta)

Litekanyetso tsa Hexadecimal li bonts'itsoe, tafole ea decimal ho ea ho hexadecimal e ka fumanoa qetellong ea tokomane ena.

Fader Control
Romela melaetsa ea Phetoho ea Taolo ho laola maemo a Kenyelletso, Kopanya masters, ho romelloa ke FX, ho khutla ha FX le DCA's

Taolo ea Limumu
Romella molaetsa o On/Off ho homola Maikutlo, Mix masters, FX e rometsoeng, FX returns, DCA's le lihlopha tse khutsitseng

dLive/Avantis Bafetoleli ba CC ba sebelisa feela Note On melaetsa bakeng sa taolo ea semumu.

dLive

The dLive Khetho ea mofetoleli oa CC e sebelisa likou tse arohaneng tsa Faders le Mutes virtual MIDI le kabelo e khethiloeng ea MIDI tafoleng bakeng sa taolo ea liteishene tsohle, ho latela dLive MIDI protocol. Taolo eohle ea fader e sebelisa boema-kepe ba CC Translator Faders, 'me taolo eohle ea limumu e sebelisa boema-kepe ba CC Translator Mutes.

N = Base MIDI Channel e abetsoeng motsoako (mocha o tlaase ka ho fetisisa oa mefuta).

Mute On ke ≥ 40 velocity, Ho homola ke ≤ 3F velocity.

dLive Mofetoleli oa CC o sebelisa feela Note On melaetsa bakeng sa taolo ea semumu.

dLive likabelo tsa kananelo bakeng sa li-fader le li-mute control ke tse latelang:

Likabelo tse ka holimo li ka fumanoa hape ho dLive Tokomane ea Protocol ea MIDI, e fumanehang ho tsoa ho www.ohole-ng.com

Tšebelisano

The Tšebelisano Khetho ea mofetoleli oa CC e sebelisa likou tse arohaneng tsa Faders le Mutes virtual MIDI le kabelo e khethiloeng ea MIDI tafoleng bakeng sa taolo ea liteishene tsohle, ho latela Tšebelisano MIDI protocol. Taolo eohle ea fader e sebelisa boema-kepe ba CC Translator Faders, 'me taolo eohle ea limumu e sebelisa boema-kepe ba CC Translator Mutes.

N = Base MIDI Channel e abetsoeng motsoako (mocha o tlaase ka ho fetisisa oa mefuta).

Mute On ke ≥ 40 velocity, Ho homola ke ≤ 3F velocity.

Tšebelisano Mofetoleli oa CC o sebelisa feela Note On melaetsa bakeng sa taolo ea semumu.

Tšebelisano likabelo tsa kananelo bakeng sa li-fader le li-mute control ke tse latelang:

Likabelo tse ka holimo li ka fumanoa hape ho Tšebelisano Tokomane ea Protocol ea MIDI, e fumanehang ho tsoa ho www.ohole-ng.com

SQ

The SQ Mofetoleli oa CC o theha boema-kepe ba Input and Output virtual MIDI - taolo ea fader ea liteishene tsa ho kenya (CH1-48, Group & FX return) o sebelisa boema-kepe ba CC Translator Inputs le likanale tsa tlhahiso (LR, Aux, FX Send, MTX & DCA sehlopha) sebelisa boema-kepe ba CC Translator Outputs. Taolo ea ho khutsisa bakeng sa liteishene tsohle tse kenyang le tse tsoang (CH1-48, Group, FX Return, LR, Aux FX Send, MTX, DCA & Mute Group) e fumaneha ka bobeli ba Input le Output.

N = MIDI Channel ea SQ (eseng mocha oa Taolo oa MIDI DAW)

Ho homola ho sebedisa Molaetsa wa Note On ka lebelo la 01, Koala e sebedisa molaetsa wa Note Off ka lebelo la 00.

SQ likabelo tsa mocha ke tse latelang:

Likabelo tse ka holimo li ka fumanoa hape ho SQ MIDI Protocol, e fumanehang ho tsoa ho www.ohole-ng.com
*Hlokomela hore likabelo tsa DCA le Sehlopha sa Mute tse nang le mofetoleli oa CC li fapane le tsa SQ MIDI protocol

 Matrix Mixes 4-6 ha e na taolo ea MIDI e fumanehang.

Qu-5/6/7

The Qu-5/6/7 Mofetoleli oa CC o theha boema-kepe ba Input and Output virtual MIDI - taolo ea fader ea liteishene tsa ho kenya (CH1-32, liteishene tsa ST&USB, Group & FX return) o sebelisa boema-kepe ba CC Translator Inputs le likanale tsa tlhahiso (LR, Aux, FX Send, MTX & DCA sehlopha) sebelisa boema-kepe ba CC Translator Outputs. Taolo ea ho khutsisa bakeng sa liteishene tsohle tse kenyang le tse tsoang (CH1-32, ST&USB liteishene, Sehlopha, FX Return, LR, Aux FX Send, MTX, DCA & Mute Group) e fumaneha ka bobeli ba Input le Output.

N = MIDI Channel ea Qu-5/6/7 (eseng mocha oa Taolo oa MIDI DAW)

Ho homola ho sebedisa Molaetsa wa Note On ka lebelo la 01, Koala e sebedisa molaetsa wa Note Off ka lebelo la 00.

Qu-5/6/7 likabelo tsa mocha ke tse latelang:

Likabelo tse ka holimo li ka fumanoa hape ho Qu-5/6/7 MIDI Protocol, e fumanehang ho tsoa ho www.ohole-ng.com
*Hlokomela hore likabelo tsa DCA le Sehlopha sa Mute tse nang le mofetoleli oa CC li fapane le tsa Qu-5/6/7 MIDI protocol

Matrix Mix 4 ha e na taolo ea MIDI e fumanehang.

Qu-16/24/32/Pac/SB

The Qu Mofetoleli oa CC o sebelisa likou tse ikhethileng tsa MIDI tsa Li-Inputs le Outputs - taolo ea likanale tse kenang (CH1-32, ST & FX Return) e sebelisa boema-kepe ba CC Translator Inputs le likanale tse hlahisoang (FX Send, Mix, LR, Group, MTX, DCA & Mute Group) sebelisa boema-kepe ba CC Translator Outputs.

N = MIDI Channel ea Qu (eseng mocha oa Taolo oa MIDI DAW)

Ho homola ho sebedisa Molaetsa wa Note On o nang le ≥ 40 velocity, Ho homola ho sebedisa Molaetsa wa Note On o nang le ≤ lebelo la 3F.

Qu-16/24/32/Pac/SB likabelo tsa kananelo bakeng sa li-fader le li-mute control ke tse latelang:

CQ

The CQ Mofetoleli oa CC o theha koung ea Input and Output virtual MIDI - taolo ea fader ea likanale tsa ho kenya (CH1-16, Stereo Inputs & FX return) o sebelisa boema-kepe ba CC Translator Inputs le likanale tsa tlhahiso (LR, Outputs, kakaretso ea Send to FX & DCA's) sebelisa boema-kepe ba CC Translator Outputs. Taolo ea semumu bakeng sa liteishene tsohle tse kenyang le tse hlahisoang (CH1-16, Stereo Inputs, FX, LR, Outputs, & DCA's) e fumaneha ka li-port tsa Input le Output.

N = MIDI Channel ea CQ, e lokiselitsoeng mocha oa 1 (so N kamehla 0)

Ho homola ho sebedisa Molaetsa wa Note On ka lebelo la 01, Koala e sebedisa molaetsa wa Note Off ka lebelo la 00.

CQ likabelo tsa mocha ke tse latelang:

Molaetsa oa Mofetoleli oa CC examples

Phetoho ea Decimal ho ea ho Hexadecimal

Litokomane / Lisebelisoa

ALLEN le HEATH MIDI Control App [pdf] Bukana ea Mosebelisi CQ, Qu, SQ, MIDI Control App, Control App, App

Litšupiso

• Bukana ea Mosebelisi