Alcom electronics 2024 Medical Power Solution Guide
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Lebitso: Minmax
- Mofuta oa Sehlahisoa: Litharollo tsa Matla a Tšireletso ea Meriana
- Mohlala: 2024
- Naha ea tlhaho: Belgium, Netherlands
- Selemo sa ho thehoa: 1990
Litaelo tsa Tšebeliso ea Sehlahisoa
- Selelekela le Lisebelisoa
Litharollo tsa Matla a Ts'ireletso ea Bongaka ka Minmax li entsoe ho fihlela litlhoko tsa litekanyetso tsa IEC 60601 bakeng sa lisebelisoa tsa bongaka tsa motlakase le litsamaiso. - Tshebetso e totobaditsweng
Mohala oa sehlahisoa o kenyelletsa Tšireletso ea Bongaka 1-20W DC-DC Converters le Medical Safety 24-60W AC-DC Power Supplies, e etselitsoeng ho sebelisoa ka katleho maemong a bongaka. - Ho itšehla thajana Voltage le Bohole ba Polokeho
Khatisong ea 3 ea IEC 60601-1 Standard, ho itšehla thajana voltage le litlhoko tsa sebaka sa polokeho li hlalositsoe ho netefatsa hore ho na le tšireletso e nepahetseng le tšireletso. Teko voltages le sebaka sa ho hlaka li tlameha ho finyella litekanyetso tse boletsoeng bakeng sa mefuta e fapaneng ea ho pata.
Lipotso tse atisang ho botsoa (FAQ)
- P: Ke lintlha life tsa bohlokoa tsa Minmax Medical Safety Power Solutions?
A: Likarolo tsa bohlokoa li kenyelletsa ho latela melao ea polokeho ea bongaka, ts'ebetso e tšepahalang, le mefuta e ikhethileng ea litlhoko tse fapaneng tsa matla lits'ebetsong tsa bongaka. - P: Nka etsa bonnete ba tšebeliso e nepahetseng ea lihlahisoa tsee maemong a bongaka?
K: Ho bohlokoa ho latela litataiso tse fanoeng bukeng ea mosebelisi, ho etsa bonnete ba hore ho kenngoe ka nepo ke basebetsi ba nang le mangolo, le ho hlahloba lisebelisoa khafetsa bakeng sa matšoao afe kapa afe a tšenyo kapa ho se sebetse hantle.
SEBAKA
THAROLLO EA MATLA A TŠEBELETSO EA MEDICA E ETSOANG KE MINMAX
- MINMAX e na le nalane e pharalletseng le boiphihlelo mabapi le moralo oa polokeho ea bongaka li-converter tsa DC-DC le lisebelisoa tsa motlakase tsa AC-DC bakeng sa lits'ebetso tse hlokang lisebelisoa tsa bongaka le tsa bophelo bo botle tse hlokang polokeho ea bongaka le sistimi e matlafalitsoeng ea ho koala. MINMAX e fana ka mefuta e mengata e fapaneng ea maemo a phahameng a ho itšehla thajana le a matlafalitsoeng a tšireletso ea bongaka a DC-DC a nang le matla a tlohang ho 1 ho isa ho 20 W le lisebelisoa tsa motlakase tsa AC-DC tse nang le matla a ho tloha ho 24 ho isa ho 60 W.
- Ha ho nahanoa ka litlhoko tsa lits'ebetso tsa bongaka / tsa bophelo bo botle bakeng sa ho itšehla thajana, MINMAX Medical Safety Power Solutions e fuoe lintlha ho tloha ho 3000 ho isa ho 5000 VAC 'me e na le insurance e matlafalitsoeng le ho lutla ha hona joale bakeng sa ts'ireletso ea opareitara (2xMOOP) kapa ts'ireletso ea mokuli (2xMOPP).
- Lihlahisoa tsohle tsa polokeho ea bongaka li kopana le litekanyetso tsa morao-rao tsa polokeho ea bongaka (ANSI/AAMI ES 60601-1 le IEC/EN rd 60601-1 3 edition) 'me li amohetsoe hore e sebelisoe ka mokhoa o ikhethileng.tage ka bang 250 Vrms kapa ho feta.
- Li-converter tsa MINMAX tsa polokeho ea bongaka tsa DC-DC le lisebelisoa tsa motlakase tsa AC-DC li fana ka tharollo ea matla a theko e tlase bakeng sa lits'ebetso tsa bongaka le tsa bophelo bo botle litulong tsa meno, lisebelisoa tsa tlhokomelo ea molomo, lipompo tsa infusion, lisebelisoa tsa thuso ea bongaka, lisebelisoa tsa bongaka tsa oksijene, likariki tsa bongaka, CT scanning, ultrasound, le likarolo tse ngata tsa lisebelisoa tse thusang tsa bongaka.
SELELEKELA LE TŠEBELETSO EA MEDICAL LE LIKOPO
HISTORI EA LIKHATISO TSA MAEMO A TŠEBELETSO EA MEDICAL IEC 60601
- Tekanyetso ea Tšireletso ea Bongaka IEC 60601 e ile ea hatisoa ka lekhetlo la pele ka 1977; Tekanyetso ea machaba ea IEC 60601 e amoheloang le ho amoheloa ke machabeng ke tokomane ea mantlha e sebetsanang le likotsi tse ngata mme e etselitsoe ho thusa ho fokotsa litaba tsa polokeho tse amanang le lisebelisoa tsa motlakase tsa bongaka le tsa bophelo bo botle.
- Tekanyetso e na le likarolo tse 'ne tse ikhethileng: maemo a mantlha (60601-1), collateral standards (60601-1-x), maemo a ikhethileng (60601-2-x), le maemo a ts'ebetso (60601-3-x).
- Tekanyetso ea mantlha, IEC 60601-1, e amohetsoe linaheng tse ngata tse kholo joalo ka maemo a naha.
- Khatiso ea boraro ea IEC 3-60601 e amohetsoeng ea maemo a polokeho ea bongaka e phatlalalitsoe ka lekhetlo la pele ke IEC ka 1 (IEC 2005:60601). Tekanyetso ea IEC 2005 e amohetsoe ke European Union ka 60601 mme ea phatlalatsoa e le EN 2006-60601:1. Tekanyetso ea likhatiso tse 2006 le eona e phatlalalitsoe ka 3 ke USA empa e fapane le khatiso ea 2006 e phatlalalitsoeng ke UL. Khatiso ea 2 e hatisitsoe ke American Association for Medical Instrumentation (AAMI) mme e hatisitsoe e le ANSI/AAMI ES 3:60601. Canada e phatlalalitse tekanyetso ena ea polokeho ea bongaka ka 2006 joalo ka CAN/CSA 2008:60601.
Khatiso ea 3 ea Medical Safety Standard IEC 60601 e qalile ho sebetsa ka linako tse fapaneng ho latela sebaka.
- Europe, likhatiso tse peli tsa maemo a IEC 2-60601 li ile tsa tlosoa; lihlahisoa tsohle ho kenyeletsoa lihlahisoa tse ncha tse hlahisitsoeng 'marakeng le lihlahisoa tse seng li ntse li rekisoa li hloka ho netefatsoa tlasa likhatiso tse 1 tsa EN 3-60601 standard pele letsatsi la ho emisa. Letsatsi la pele la ho emisa khatiso ea 1 United States ke Phupu 2, 1. FDA e phatlalalitse katoloso ea ho fa baqapi ba lisebelisoa tsa bongaka tsa US phokotso e nyane, ho beha letsatsi le ntlafalitsoeng la phetoho ho la 2013 Tšitoe 31, mme letsatsi la ho qala la khatiso ea 2013 e bile la 3 Pherekhong 1. ANSI/AAMI ES 2014-60601 e tloaelehileng; lihlahisoa tse teng ha li.
- Canada, letsatsi la pele la ho emisa khatiso ea 2 le ile la lieha, joalo ka USA, ka letsatsi le ntlafalitsoeng la phetoho la June 30, 2014. Letsatsi la ho sebetsa bakeng sa khatiso ea 3 e lokollotsoeng e ne e le July 1, 2014. Leha ho le joalo, lihlahisoa tse ncha feela ka mor'a letsatsi lena li hloka ho khotsofatsa khatiso ea 3.
- Lisebelisuoa tsohle tsa MINMAX tsa tšireletso ea meriana ea AC-DC le tšireletso ea bongaka li-converter tsa DC-DC li tiisitsoe ho ea ka mokhoa o amohelehang oa khatiso ea 3 (e nang le mekhoa e habeli ea tšireletso bakeng sa boholo ba lisebelisoa tsa motlakase) hape e lekoa khahlanong le khatiso ea 2. e boetse e lekoa khahlanong le khatiso ea 2.
LIPHETOHO HO TLOHA KHATISO EA BO-2 HO FIHLELA KHATISO EA BO-3 EA IEC 60601-1 STANDARD
- Khatisong ea 2 ea standard ea IEC 60601-1, litataiso li lokela ho sebelisoa ha lisebelisoa tsa bongaka le tsa bophelo bo botle tsa motlakase li le ka har'a "tikoloho ea mokuli," e hlalosoang e le 6-ft. radius ho potoloha mokudi.
- Ho ne ho e-na le mekhahlelo e meraro ea boima bo ntseng bo eketseha: e boetse e lekoa khahlanong le khatiso ea 2.
LIPHETOHO HO TSOA KHATISO EA 2 HO FIHLELA KHATISO EA 3 EA IEC 60601-1 MAEMO.
- Khatiso ea 2 ea standard ea IEC 60601-1 e sebetsana feela le litaba tsa mantlha tsa polokeho bakeng sa ts'ireletso ho tsoa likotsing life kapa life tsa motlakase, tsa mochini, tsa radiation le tsa mocheso. Leha ho le joalo, e ne e sa hloke lisebelisoa hore li lule li sebetsa; ho hloleha ho bolokehile ho ne ho lekane mme ha hoa ka ha nka ts'ebetso ea bohlokoa ea sesebelisoa tekong ea sephetho sa ho pasa / ho hloleha. Ka hona, khatiso ea 3rd ea IEC 60601-1 standard e hlahisa lintlha tsa "ts'ebetso ea bohlokoa" e hlokang lisebelisoa tsa bongaka / tsa bophelo bo botle ho tsoela pele ho sebetsa nakong eohle ea tlhahlobo. Kaha lisebelisoa tsa motlakase tsa AC-DC le polokeho ea bongaka li-converter tsa DC-DC li phethile karolo ea bohlokoa haholo lisebelisoa tse netefalitsoeng tsa bongaka le tsa bophelo bo botle, khatiso ea IEC 3-60601 ea IEC 1-XNUMX e hlahisa mehopolo e mecha e kang ts'ebetso ea bohlokoa ea lisebelisoa mme e khetholla ho sireletsa motho ea sebelisang lisebelisoa le mokuli
- Tšireletso ea Opereishene (MOOP) le Mekhoa ea Tšireletso ea Mokuli (MOPP) ho latela sebaka sa polokeho ea karohano, merero ea ho kenya letsoho, le litlhoko tsa matla a dielectric.
- Sehlopha se ile sa etsa qeto ea mefuta e laetsoeng kapa e lumelletsoeng ea maemo a ho itšehla thajana, ho kenya letsoho, creepage, clearance ea moea, le ho lutla ha hona joale hoo basebelisi le bakuli ba ka kopanang le bona.
KHAONO KHOLOTAGE LE BOKALA BA TŠIRELETSO HO ED ITION YA 3 YA IEC 60601-1 STANDARD
- Khatiso ea 3 ea tekanyetso ea polokeho ea IEC 60601-1 e amohetsoeng e boletse hore sebaka sa polokeho bakeng sa sebaka se tlase sa creepage, tumello ea moea le ho itšehla thajana.tage tlameha ho finyelloa molemong oa ho qoba likotsi le ho etsa bonnete ba ho lokoloha litsing tse kotsi tsa matla ka lebaka la litšisinyeho life kapa life tsa motlakase le likotsi tse feteletseng tsa matla, matla a nakoana.tagli-spikes, ho senyeha ha motlakase oa mohaho oa motlakase, tšenyo ea mochine, ho khantša, mollo, lifupi tse ntseng li tsoela pele pakeng tsa lipina tsa PCB le likheo tsa moea, li-arcing le li-loops tsa fatše, tse lumellanang le ho lutla ho fokolang ha hona joale nakong ea maemo a tloaelehileng le a le mong.
- Boemo bo hlokahalang bakeng sa ho itšehla thajana voltage itšetlehile ka mofuta oa ho kenya letsoho, matla a sebetsangtage, le tekanyo ea tšilafalo, le litšitiso tsa ho kenya letsoho li tlameha ebe li fetile matla a phahamengtage teko.
- Ho ea ka pono ea rona ho MINMAX, re lumela hore lisebelisoa tsa matla bakeng sa lisebelisoa tsa bongaka le tsa bophelo bo botle li lokela ho fana ka tšireletso e phahameng ka ho fetisisa; ka hona, li-converter tsa rona tsa polokeho ea bongaka tsa DC-DC le lisebelisoa tsa motlakase tsa AC-DC li na le 2xMOPP/2xMOOP ho tloha lehlakoreng la mantlha ho ea lehlakoreng la bobeli (mains AC ho ea ho low-vol.tage DC). Sena se fa baqapi ba lisebelisoa tsa bongaka/ tsa bophelo bo botle le tiisetso ea hore ho na le litšitiso tsa mantlha le tsa bobeli tse matlafalitsoeng meahong ea matla a bongaka ho netefatsa polokeho ea nako e telele.
|
Insulation |
MOPO | MOPP | ||||
| Ho Hlakola Moea | Creepage Distance | Moqtage | Ho Hlakola Moea | Creepage Distance | Moqtage | |
| Motheo | 1 x MOP | | 2.0 limilimithara | 3.2 limilimithara | 1500 VAC | 2.5 limilimithara | 4.0 limilimithara | 1500 VAC |
| Habeli kapa Matlafatsoa | 2 x MOP | | 4.0 limilimithara | 6.4 limilimithara | 3000 VAC | 5.0 limilimithara | 8.0 limilimithara | 4000 VAC |
Teko ea insulation voltage thehiloeng ho 250 VAC sebetsa voltage | MOP = Mekhoa ea tšireletso | MOOP = Mekhoa ea ts'ireletso ea ts'ebetso | | MOPP = Mokhoa oa ho sireletsa mokuli.
KHAONO KHOLOTAGE LE BOKALA BA TŠIRELETSO HO KHATISO EA 3 EA IEC 60601-1 STANDARD
LEAKAGE CURRENT KHATISONG EA 3 EA IEC 60601-1 STANDARD
- Hore na sehlahisoa se nkuoa e le MOOP kapa MOPP, litlhoko tsa hona joale tsa ho lutla li tlameha ho fihlelleha.
- Phetoho e 'ngoe lipakeng tsa likhatiso tsa 2 le 3 e amana le litlhoko tsa hajoale tsa ho lutla ha Lefatše.
- Boemo ba hona joale ba ho lutla bo hloka ho lumellana le boleng ba moeli ho qoba likotsi le ho netefatsa ho lokoloha litsing tse kotsi tsa matla ka lebaka la ts'isinyeho efe kapa efe ea motlakase le likotsi tse feteletseng tsa matla, matla a nakoana.tagli-spikes, ho senyeha ha motlakase oa mohaho oa matla, tšenyo ea mechine, ho chesa, mollo, lifupi tse ntseng li tsoela pele pakeng tsa lipina tsa PCB, likheo tsa moea, li-arcing, le li-loops tsa fatše tseo opereishene kapa mokuli a ka kopanang le tsona ka ho toba nakong ea maemo a tloaelehileng le a le mong.
- Liteko tsa hona joale tsa ho lutla li etselitsoe ho etsisa 'mele oa motho o kopanang le likarolo tse fapaneng tsa lisebelisoa tsa bongaka / tsa bophelo bo botle. Litefiso tse lekantsoeng tsa ho lutla ha joale li lokela ho lumellana le meeli e amohelehang.
- Earth leakage current Hona joale e phallang ka har'a mokhanni oa lefatše.
- Enclosure leakage current Hona joale e phallang lefatšeng ka mokuli ho tsoa sebakeng se kampetsoeng.
- Mokuli a lutla hajoale Hona joale ho phalla lefatšeng ka mokuli ho tsoa karolong e sebelisitsoeng.
- Mokuli ea thusang hajoale Hona joale e phallang lipakeng tsa likarolo tse peli tse sebelisitsoeng.
- NC = Maemo a Tloaelehileng|
- SFC = Maemo a le Mong a Phoso|
- *Palo e phahameng ka ho fetisisa ea Lefatše le sebaka se koaletsoeng se lutla bakeng sa lisebelisoa tsa tlhokomelo ea bakuli US ke 300 μA.|
- (1) "Enclosure Leakage Current" e fetotsoe ho "Touch Leakage Current" khatisong ea 3rd ea IEC 60601-1 standard|
TS'ELISO MOFUTA
Mefuta e mehlano e fapaneng ea limaraka tsa ho kenya letsoho e thathamisitsoe ka tlase.
|
Insulation e sebetsang |
Insulation e hlokahala feela bakeng sa ts'ebetso e nepahetseng ea lisebelisoa mme ha e fane ka tšireletso khahlanong le ts'oaetso ea motlakase. |
| Insulation ea motheo | Insulation e sebelisoa likarolong tse phelang ho sireletsa khahlanong le ts'oaetso ea motlakase. |
|
Insulation ea tlatsetso |
Ho kenngoa ka mokhoa o ikemetseng ho sebelisoa ho phaella ho ts'ireletso ea motheo ho sireletsa khahlanong le ts'oaetso ea motlakase ha ho e-na le ho hlōleha ha motheo oa motheo. |
| Insulation habeli | Insulation e na le insulation ea mantlha ea mantlha le insulation ea tlatsetso. |
|
Insulation e Matlafalitsoeng |
Sistimi e le 'ngoe ea insulation e sebelisoa likarolong tse phelang tse fanang ka ts'ireletso e itseng khahlano le ts'oso ea motlakase e lekanang le ho pata habeli. |
SEBOPEHO SA MEDICAL INSUlation SYSTEM
- Setšoantšo se ka tlaase se bontša sebopeho sa tsamaiso ea ho kenya letsoho le litšitiso tse peli tsa ho kenya letsoho tse fanang ka Mekhoa e 'meli ea Tšireletso (MOP) e lokelang ho ba teng ka har'a mekhoa ea bongaka / ea bophelo bo botle.
- Ho hlokahala litšitiso tse peli ho netefatsa hore karolo e sebelisitsoeng, e kenyelletsang bakuli le basebelisi, e arotsoe ebile e sirelelitsoe ho ts'oenyeho e kotsi ea matla ka lebaka la ts'isinyeho efe kapa efe ea motlakase le likotsi tse feteletseng tsa matla, matla a nakoana.tagli-spikes, ho senyeha ha motlakase oa mohaho oa motlakase, tšenyo ea mochine, ho khantša, mollo, lifupi tse ntseng li hōla pakeng tsa lipina tsa PCB, likheo tsa moea, li-arcing le li-loops tsa fatše 'me li lumellana le boemo bo fokolang ba ho lutla nakong ea maemo a tloaelehileng le a le mong.
- Ka har'a sebaka sa polokeho ea motlakase, tumello ea ts'ireletso ea bongaka e hloka lisebelisoa ho kenya ts'ebetsong Mekhoa e 'meli ea Tšireletso (MOP) e le hore haeba ho hlōleha ho etsahala sebakeng se le seng, mochine oa bobeli o sireletsa mokhanni le / kapa mokuli khahlanong le litšisinyeho tse kotsi tsa matla ho tsoa ho ts'isinyeho leha e le efe ea motlakase le likotsi tse feteletseng tsa matla, transient vol.tagli-spikes, le ho senyeha ha insulation ea mohaho oa motlakase.
- Tšireletseho ea bongaka ea MINMAX lisebelisoa tsa motlakase tsa AC-DC le polokeho ea bongaka Li-converter tsa DC-DC li amohetsoe bakeng sa khatiso e ncha ea 3 ea IEC 60601-1 e tloaelehileng e nang le boemo bo matla ba ho kenya letsoho. Ho feta moo, lisebelisoa tsohle tsa motlakase tsa AC-DC tsa polokeho ea bongaka li fana ka 2xMOPP 'me li loketse joalo ka tšitiso ea mantlha e matlafalitsoeng. Li-converter tsohle tsa DC-DC tsa polokeho ea bongaka li fana ka 2xMOPP kapa 2xMOOP 'me li loketse e le mokoallo oa bobeli o matlafalitsoeng oa sebopeho sa tsamaiso ea ho kenya letsoho ho netefatsa polokeho ea nako e telele ea basebetsi / bakuli.
Sistimi ea Insulation ea bongaka / ea Bophelo bo Botle
- MP: Karolo e ka sehloohong
- LP: Karolo e Phelang = Karolo e sa Sebelisaneng ea Potoloho ea Elektronike
- AP: Karolo e Sebelisitsoeng = Karolo e Sebelisitsoeng Potoloho ea Elektronike
LIEKETSENG EMC MAEMO
Lisebelisoa tsohle tsa MINMAX tsa polokeho ea bongaka tsa AC-DC le li-converter tsa DC-DC li etsa liteko tse 4 tsa bongaka tsa EMCth (Emission + Immunity) tsa LIFE-SUPPORTING ME EQUIPMENT ho re thusa ho fana ka tlhaiso-leseling e ngata kamoo ho ka khonehang nakong ea moralo oa ts'ebetso ho netefatsa hore lisebelisoa tsa bongaka / tsa bophelo bo botle li latela EN 50155: 2009+IctroENic Interference (AI) 60601-1-2: 2015 bakeng sa EMS (Electromagnetic Susceptibility).
Boemo ba Teko ba EMC ea Tšireletso ea Bongaka DC-DC Converters
Boemo ba Tlhahlobo ea EMC ea Tšireletso ea Bongaka ea Matla a AC-DC
LITŠEnyehelo VS. LIKOTSI POLOKO
- Le hoja khatiso ea 3 ea IEC 60601-1 e fana ka bahlahisi ba lisebelisoa tsa bongaka / tsa bophelo bo botle dikgetho tse eketsehileng tse amanang le khetho ea matla a motlakase, potso e tlang ea kotsi khahlanong le litšenyehelo e tlameha ho nkoa, ke hore, motlakase o theko e tlaase o nang le ts'ebetso e tlaase ho boloka lidolara tse seng kae khahlanong le phepelo ea motlakase e nang le litlhaloso tse phahameng le setifikeiti sa polokeho se ka 'nang sa bitsa chelete e ngata empa se fokotsa kotsi ka hohle kamoo ho ka khonehang. Ntle le moo, haeba u e fosa ka moralo oa sesebelisoa sa bongaka, e ka fokotsa 'maraka oa hau, ea sekisetsa lebitso la hau,' me ea liehisa tumello ea taolo kapa ho hobe le ho feta.
- Ka lebaka leo, lintlha tsa phepelo ea matla a tšireletso ea bongaka tse amohetsoeng ho latela maemo a IEC/EN 60601-1 le tse tsamaellanang le Mekhoa ea Tšireletso (MOP) li khethoa bakeng sa baetsi ba lisebelisoa tsa bongaka/ tsa bophelo bo botle.
KETSAHALO E HLAHANG EA LIHLAHISO TSA TŠEBELETSO EA MEDICAL
Ultra-wide Input Voltage Range
Sistimi ea Insulation ea bongaka / ea Bophelo bo Botle
- ExampleTlhaloso: MIW06-24S12M
Vacuum e Kenyellelitsoeng ka Botlalo ho Boloka Sisteme ea Hau
Bakeng sa ts'oaetso ea motlakase le tšitiso ea 'mele ea tikoloho e sirelelitsoeng matleng a ts'ireletso a felletseng.
Matlafatso ea Insulation & 5KVAC Isolation for System Safety
- Karohano ea 5KVAC I / O e nang le insulation e matlafalitsoeng le vacuum e kentsoeng e theha mokoallo o tiileng oa motlakase o sirelletsang mojaro o bobebe oa potoloho ho tsoa lerata, litšitiso tsa motlakase, le ho feto-fetoha ha libese tsa motlakase, ho qoba kotsi le ho netefatsa tokoloho ea ts'isinyeho e kotsi ea matla ho tsoa ho ts'isinyeho efe kapa efe ea motlakase le likotsi tse feteletseng tsa matla, matla a nakoana.tage spike, ho senyeha ha moaho oa motlakase, tšenyo ea mochini, ho tima, mollo le nts'etsopele e khutšoane lipakeng tsa lipina tsa PCB, likheo tsa moea, arcing le loop ea fatše e fanang ka polokeho ts'ebetsong ea nako e telele ea lisebelisoa tsa bongaka / tsa bophelo bo botle.
- Ka kopo sheba "Isolation Voltage le Bohole ba Tšireletseho Khatisong ea 3 ea IEC 60601-1 Standard & Leakage Hajoale Khatisong ea 3 ea IEC 60601-1 Standard & Insulation Type”.
- ExampLe: MIW06-24S12M
8mm Creepage & Clearance e nang le 2xMOPP Level
- Ho itšehla thajana 5KVAC/60sec ka Insulation e Matlafalitsoeng
- Leakage e tlase ea hajoale <2uA
- Matla a ho Isolation a tlase a I/O 40pF max.
Sebaka se Pharalletseng sa Mocheso oa Mocheso
Mocheso o pharaletseng oa ho sebetsa. ho latela theknoloji ea morao-rao ea taolo ea mocheso le vacuum e kentsoeng ka botlalo.
Theknoloji ea ECO
Moralo o Motala bakeng sa Sebetsa se Phahameng ka ho Fetisisa
Ho sebetsa hantle haholo bakeng sa phallo e felletseng, mohala oa ho kenya le mocheso o teng. ho latela theknoloji ea morao-rao e tala e thusa ho boloka matla, taolo ea mocheso, le ho fokotsa mocheso. ho phahama le boholo ba miniaturization.
Moralo o Motala bakeng sa Ho Boloka Matla, Fokotsa Ho Phahamisa Mocheso
- Tšebeliso ea matla a tlase haholo a se nang moroalo ka theknoloji ea morao-rao ea botala e thusa ho ntlafatsa le ho fokotsa mocheso. ho phahama (qoba mathata a mocheso), ho boloka matla, le ho lelefatsa bophelo ba betri.
- Kenyo e Tlase Hajoale Ha ho Meroalo 5mA @ 24Vin
- Tlase Haholo Ha ho Tšebeliso ea Matla a Matla 0.12Watt @ 24Vin
Moralo o Motala bakeng sa No Min. Moroalo / Tlhokahalo ea Mojaro oa Dummy
Ka moralo o phahameng oa botsitso ba loop, tharollo ea matla a ts'ireletso ea bongaka ea MINMAX e kanna ea se ke ea sisinyeha maemong a se nang moroalo kapa a bobebe.
Matlafatsa Sisteme ea hau ka nepo
Ho Seta ho Nepaha ± 1% Vom | Line Regulation ± 0.5% | Taolo ea Mojaro ± 0.5% | Karabelo e Phahameng ea Nakoana | Mocheso o Tlase Coefficient
- Tlhahiso voltage ntse e tla boloka ka nepo e ntle haholo, le hoja tlhahiso ea voltage, tlhahiso ea hona joale le mocheso oa tikoloho. ea sistimi ha e tsitsa.
- Tlhahiso voltage ea lihlahisoa tse tloaelehileng ka 'na undershoot le overshoot ho hlakile hore nakong ea mojaro liphetoho. MINMAX litharollo tsa matla a tšireletso ea bongaka li ntse li bolokoa ka tlhahiso e lekantsoeng ea voltage bohlokoa.
Nako ea ho Qala ka potlako ntle le Overshoot
- Nako ea ho qala ea MIW06M e fokotseha ho tloha ho 250mS ho ea ho 20mS e thusang ho qoba ho hlōleha leha e le efe ea nako ea tsamaiso e bakoang ke nako e telele ea ho qala.
- Nako ea ho qala ka potlako ntle le ho fetella e netefatsa polokeho ea sistimi ea hau.
Bokhoni bo Phahameng ba ho Khanna
Litharollo tsa matla a polokeho ea bongaka tsa MINMAX li na le bokhoni bo phahameng ba ho khanna bo ka tsamaisang sistimi ea hau ka nako e tlase haholotage esita le zero voltage sephetho ntle le ho hloleha ho qala.
Ts'ebetso e ntle ea EMC
Ts'ebetso e ntle ea EMI ka theknoloji e ntlafalitsoeng ea ho sefa lerata e thusa ho ntlafatsa ts'ebetso ea EMI ka kakaretso mabapi le conduction le tlhahiso ea radiation.
- Ha ho karolo ea kantle e hlokahalang bakeng sa tlhahiso e etsoang e kopanang le EN 55011 Sehlopha sa A.
- Ke likarolo tse fokolang feela tse hlokahalang bakeng sa tlhahiso ea mahlaseli tse kopanang le EN 55011 Sehlopha sa B.
Ts'ebetso e ntle ea EMS ka theknoloji e ntlafalitsoeng ea ts'ireletso ea lerata e thusa ho ntlafatsa ts'ebetso ea EMS ka kakaretso ho ESD, Surge, EFT, RS, CS le PFMF.
- E-cap e le 'ngoe feela. e hlokahalang bakeng sa ho itšireletsa ha ± 2KV surge ke IEC 61000-4-5 e nang le mekhoa ea A.
- E-cap e le 'ngoe feela. e hlokahalang bakeng sa ho itšireletsa ha ± 2KV EFT ke IEC 61000-4-4 e nang le litekanyetso A.
Ka kopo sheba ''Melao ea EMC ea Bongaka'' leqepheng la 09 & 10 bakeng sa lintlha tse ling.
Lower Ripple & Noise
Small Ripple & Noise bakeng sa phallo e felletseng, mohala oa ho kenya le mocheso o teng. range ka thekenoloji e ntlafalitsoeng ea ho sefa lerata e thusa ho fokotsa likaroloana tse hlokahalang le tšitiso ea lerata.
Mesebetsi ea Tšireletso mabapi le Ts'ebetso e sa Tloaelehang
Litharollo tsa matla a ts'ireletso ea bongaka tsa MINMAX ke ts'ireletso ea hang-hang bakeng sa UVP, OCP, OVP & SCP e thusang ho netefatsa polokeho ea nako e telele ea ts'ebetso ea sistimi.
Setifikeiti
- UL/cUL/IEC/EN 62368-1(60950-1) E amohetsoe
- UL 508 E amohetsoe
- Tšireletseho ea Bongaka IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 E Amogetsoe
- Letšoao la CE
- Sehlopha sa Tšireletso
MINMAX PHEKO THAROLLO MATLA THAROLLO
KATLEHO LIKOPO
- Lisebelisoa tsa Meno
- Medical Panel PC
- Mobile Cart Computer
- ECG, EEG
- Tsamaiso ea Thuso ea Bongaka
- Mochine oa CPAP
- CT Scanning
- Tsamaiso ea Boitsebiso ba Bophelo bo Botle
LIHLAHISO TSA TŠEBELETSO EA MEDICAVIEW
Tšireletseho ea Bongaka DC-DC Converters
|
Letoto |
Matla a Output |
Keletso VoltagE Range (VDC) |
Khumo Voltage (VDC) |
Ho itšehla thajana (VDC) |
Katleho |
Ambient Temp e sebetsang. Sebaka(1) |
Molao oa Khumo | Ha ho Min. Laela | OCP | OVP | SCP |
Boemo ba Tšireletso |
ANSI/AAMI ES 60601-1 | IEC/EN 60601-1 3 rd |
| 1W • Sephutheloana sa SIP | ||||||||||||||
|
1W |
4.5-5.5,
10.8-13.2 |
5, 12, 15,
±12, ±15 |
3000VAC
E matlafalitsoe |
75% |
-25~+85°C |
1xMOPP
2xMOOP |
||||||||
|
1W |
4.5-5.5,
10.8-13.2 21.6-26.4, |
5, 12, 15 |
4000VAC
E matlafalitsoe |
81% |
-40~+95°C |
2xMOPP |
||||||||
| 1-2W • Sephutheloana sa SMD | ||||||||||||||
|
1W |
4.5-5.5,
10.8-13.2, 21.6-26.4 |
5, 12, 15,
±12, ±15 |
4000VAC
E matlafalitsoe |
84% |
-40~+95°C |
2xMOPP |
||||||||
|
2W |
4.5-5.5,
10.8-13.2 21.6-26.4, |
5, 12, 15,
±12, ±15 |
4000VAC
E matlafalitsoe |
75% |
-25~+80°C |
1xMOPP
2xMOOP |
||||||||
| 2-10W • Sephutheloana sa DIP | ||||||||||||||
|
2W |
4.5-5.5,
10.8-13.2 21.6-26.4, |
5, 12, 15,
±12, ±15 |
4000VAC
E matlafalitsoe |
75% |
-25~+80°C |
1xMOPP
2xMOOP |
||||||||
|
3W |
9-40,
18-80, 36-160 |
5, 12,
±12, ±15 |
4000VAC
E matlafalitsoe |
83% |
-40~+85°C |
1xMOPP
2xMOOP |
||||||||
|
3.5W |
4.5-9,
9-18, 18-36, 36-75 |
5, 5.8,
12, 15 ±12, ±15 |
5000VAC
E matlafalitsoe |
87% |
-40~+96°C |
2xMOPP |
||||||||
|
6W |
9-18,
18-36, 36-75 |
5, 12, 15,
±12, ±15 |
5000VAC
E matlafalitsoe |
89% |
-40~+95°C |
2xMOPP |
||||||||
|
10W |
9-18,
18-36, 36-75 |
3.3, 5, 5.1,
12, 15, 24, ±12, ±15 |
5000VAC
E matlafalitsoe |
88% |
-40~+90°C |
2xMOPP |
||||||||
| 10-20W • 2″×1″ Pakete | ||||||||||||||
|
15W |
9-18,
18-36, 36-75 |
5, 5.1,
12, 15, 24, ±12, ±15 |
4200VAC
E matlafalitsoe |
90% |
-40~+85°C |
2xMOPP |
||||||||
|
20W |
9-18,
18-36, 36-75 |
5, 5.1,
12, 15, 24, ±12, ±15 |
4200VAC
E matlafalitsoe |
90% |
-40~+80°C |
2xMOPP |
||||||||
Tšireletseho ea Meriana Liphetoho tsa AC-DC
|
Letoto |
Matla a Output |
Keletso VoltagE Range (VAC) |
Khumo Voltage (VDC) |
Ho itšehla thajana (VDC) |
Katleho |
Ambient Temp e sebetsang. Sebaka(1) |
Molao oa Khumo | Ha ho Min. Laela |
Sephutheloana |
OCP | OVP |
Boemo ba Tšireletso |
ANSI/AAMI ES 60601-1 | IEC/EN 60601-1 3 rd |
| AJM-24 | 24W |
85-264 |
5,9,12,15,
24, ±12 ±15 |
4000VAC
E matlafalitsoe |
85% | -40~+80°C | PCB
Chassis DIN-Rail |
2xMOPP | ||||||
| EA-40-APM | 40W |
85-264 |
5,12,15,
±12±15 |
4000VAC
E matlafalitsoe |
85% | -40~+80°C | PCB
Chassis DIN-Rail |
2xMOPP | ||||||
| 60W |
85-264 |
5.1,12,
15,24,48 |
4000VAC
E matlafalitsoe |
85% | -40~+80°C | PCB
Chassis DIN-Rail |
2xMOPP |
Ka kopo sheba letlapa la lintlha tsa curve tse nyenyefatsang.
TŠIRELETSO EA MEDICAL • BAFOKOLI BA DC-DC
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MAU401 | 5 | 200 | 66% | |
| MAU402 | 12 | 80 | 66% | |
| MAU403 | 15 | 65 ± | 66% | |
| 4.5 - 5.5 | ||||
| MAU404 | ±5 | 100 | 66% | |
| MAU405 | ±12 | ±40 | 72% | |
| MAU406 | ±15 | ±35 | 73% | |
| MAU411 | 5 | 200 | 66% | |
| MAU412 | 12 | 80 | 66% | |
| MAU413 | 10.8 - 13.2 | 15 | 65 | 66% |
| MAU414 | ±5 | ±100 | 66% | |
| MAU415 | ±12 | ±40 | 74% | |
| MAU416 | ±15 | ±35 | 75% |
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MAU01-05S05M | 5 | 200 | 79% | |
| MAU01-05S12M | 4.5 - 5.5 | 12 | 84 | 80% |
| MAU01-05S15M | 15 | 68 | 81% | |
| MAU01-12S05M | 5 | 200 | 79% | |
| MAU01-12S12M | 10.8 - 13.2 | 12 | 84 | 81% |
| MAU01-12S15M | 15 | 68 | 79% | |
| MAU01-24S05M | 5 | 200 | 76% | |
| MAU01-24S12M | 21.6 - 26.4 | 12 | 84 | 79% |
| MAU01-24S15M | 15 | 68 | 79% |
1W Lethathamo la lintlha tsa MSCU01M Sephutheloana sa SMD
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MSCU01-05S05M | 5 | 200 | 76% | |
| MSCU01-05S12M | 12 | 84 | 80% | |
| MSCU01-05S15M | 4.5 - 5.5 | 15 | 68 | 83% |
| MSCU01-05D12M | ±12 | ±42 | 80% | |
| MSCU01-05D15M | ±15 | ±33 | 84% | |
| MSCU01-12S05M | 5 | 200 | 76% | |
| MSCU01-12S12M | 12 | 84 | 79% | |
| MSCU01-12S15M | 10.8 - 13.2 | 15 | 68 | 80% |
| MSCU01-12D12M | ±12 | ±42 | 79% | |
| MSCU01-12D15M | ±15 | ±33 | 80% | |
| MSCU01-24S05M | 5 | 200 | 76% | |
| MSCU01-24S12M | 12 | 84 | 80% | |
| MSCU01-24S15M | 21.6 - 26.4 | 15 | 68 | 80% |
| MSCU01-24D12M | ±12 | ±42 | 80% | |
| MSCU01-24D15M | ±15 | ±33 | 80% |
2W Sehlopha sa MSHU100 Sephutheloana sa SMD
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MSHU102 | 5 | 400 | 66% | |
| MSHU104 | 4.5 - 5.5 | 12 | 165 | 66% |
| MSHU105 | 15 | 133 | 66% | |
| MSHU108 | ±12 | ±83 | 72% | |
| MSHU109 | ±15 | ±66 | 73% | |
| MSHU112 | 5 | 400 | 66% | |
| MSHU114 | 12 | 165 | 66% | |
| MSHU115 | 10.8 - 13.2 | 15 | 133 | 66% |
| MSHU118 | ±12 | ±83 | 74% | |
| MSHU119 | ±15 | ±66 | 75% | |
| MSHU122 | 5 | 400 | 66% | |
| MSHU124 | 12 | 165 | 66% | |
| MSHU125 | 21.6 - 26.4 | 15 | 133 | 66% |
| MSHU128 | ±12 | ±83 | 74% | |
| MSHU129 | ±15 | ±66 | 75% |
2W Lethathamo la lintlha tsa MDHU100 Sephutheloana sa DIP
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MDHU102 | 5 | 400 | 66% | |
| MDHU104 | 12 | 165 | 66% | |
| MDHU105 | 4.5 - 5.5 | 15 | 133 | 66% |
| MDHU108 | ±12 | ±83 | 72% | |
| MDHU109 | ±15 | ±66 | 73% | |
| MDHU112 | 5 | 400 | 66% | |
| MDHU114 | 12 | 165 | 66% | |
| MDHU115 | 10.8 - 13.2 | 15 | 133 | 66% |
| MDHU118 | ±12 | ±83 | 74% | |
| MDHU119 | ±15 | ±66 | 75% | |
| MDHU122 | 5 | 400 | 66% | |
| MDHU124 | 12 | 165 | 66% | |
| MDHU125 | 21.6 - 26.4 | 15 | 133 | 66% |
| MDHU128 | ±12 | ±83 | 74% | |
| MDHU129 | ±15 | ±66 | 75% |
3W Lethathamo la lintlha tsa MIHW2000 Sephutheloana sa DIP
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MIHW2022 | 5 | 600 | 78% | |
| MIHW2023 | 12 | 250 | 83% | |
| 9 - 40 | ||||
| MIHW2026 | ±12 | ±125 | 83% | |
| MIHW2027 | ±15 | ±100 | 83% | |
| MIHW2032 | 5 | 600 | 78% | |
| MIHW2033 |
18 - 80 |
12 | 250 | 83% |
| MIHW2036 | ±12 | ±125 | 83% | |
| MIHW2037 | ±15 | ±100 | 83% | |
| MIHW2042 | 5 | 600 | 78% | |
| MIHW2043 | 12 | 250 | 83% | |
| 36 - 160 | ||||
| MIHW2046 | ±12 | ±125 | 83% | |
| MIHW2047 | ±15 | ±100 | 83% |
3.5W Lethathamo la lintlha tsa MIW03M Sephutheloana sa DIP
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MIW03-05S05M | 5 | 700 | 83% | |
| MIW03-05S058M | 5.8 | 600 | 83% | |
| MIW03-05S12M | 4.5 - 9 | 12 | 290 | 84% |
| MIW03-05S15M | 15 | 235 | 84% | |
| MIW03-05D12M | ±12 | ±145 | 84% | |
| MIW03-05D15M | ±15 | ±115 | 84% | |
| MIW03-12S05M | 5 | 700 | 83% | |
| MIW03-12S12M | 12 | 290 | 87% | |
| MIW03-12S15M | 9 - 18 | 15 | 235 | 87% |
| MIW03-12D12M | ±12 | ±145 | 87% | |
| MIW03-12D15M | ±15 | ±115 | 87% | |
| MIW03-24S05M | 5 | 700 | 83% | |
| MIW03-24S12M | 12 | 290 | 86% | |
| MIW03-24S15M | 18 - 36 | 15 | 235 | 87% |
| MIW03-24D12M | ±12 | ±145 | 87% | |
| MIW03-24D15M | ±15 | ±115 | 86% | |
| MIW03-48S05M | 5 | 700 | 83% | |
| MIW03-48S12M | 12 | 290 | 86% | |
| MIW03-48S15M | 36 - 75 | 15 | 235 | 85% |
| MIW03-48D12M | ±12 | ±145 | 84% | |
| MIW03-48D15M | ±15 | ±115 | 84% |
6W Lethathamo la lintlha tsa MIW06M Sephutheloana sa DIP
Tataiso ea Khetho ea Mehlala
10W Lethathamo la lintlha tsa MIW10M Sephutheloana sa DIP
Tataiso ea Khetho ea Mehlala
15W Lethathamo la lintlha tsa MKW15M 2"x1" Sephutheloana
Tataiso ea Khetho ea Mehlala
20W Lethathamo la lintlha tsa MKW20M 2"x1" Sephutheloana
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VDC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| MKW20-12S05M | 5 | 4000 | 86% | |
| MKW20-12S051M | 5.1 | 4000 | 86% | |
| MKW20-12S12M | 12 | 1670 | 89% | |
| MKW20-12S15M | 9 - 18 | 15 | 1333 | 88% |
| MKW20-12S24M | 24 | 840 | 89% | |
| MKW20-12D12M | ±12 | ±840 | 89% | |
| MKW20-12D15M | ±15 | ±670 | 89% | |
| MKW20-24S05M | 5 | 4000 | 88% | |
| MKW20-24S051M | 5.1 | 4000 | 88% | |
| MKW20-24S12M | 12 | 1670 | 89% | |
| MKW20-24S15M | 18 - 36 | 15 | 1333 | 89% |
| MKW20-24S24M | 24 | 840 | 90% | |
| MKW20-24D12M | ±12 | ±840 | 90% | |
| MKW20-24D15M | ±15 | ±670 | 90% | |
| MKW20-48S05M | 5 | 4000 | 88% | |
| MKW20-48S051M | 5.1 | 4000 | 88% | |
| MKW20-48S12M | 12 | 1670 | 89% | |
| MKW20-48S15M | 36 - 75 | 15 | 1333 | 90% |
| MKW20-48S24M | 24 | 840 | 89% | |
| MKW20-48D12M | ±12 | ±840 | 89% | |
| MKW20-48D15M | ±15 | ±670 | 90% |
24W Letoto la AJM-24 Sephutheloana se Kentsoeng
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VAC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| AJM-24S05 | 5 | 3000 | 77% | |
| AJM-24S09 | 9 | 2666 | 82% | |
| AJM-24S12 | 12 | 2000 | 83% | |
| AJM-24S15 | 85 - 264 | 15 | 1600 | 82% |
| AJM-24S24 | 24 | 1000 | 85% | |
| AJM-24D12 | ±12 | ±1000 | 84% | |
| AJM-24D15 | ±15 | ±800 | 84% |
40W Letoto la APM-40 Sephutheloana se Kentsoeng
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VAC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| APM-40S05 | 5 | 8000 | 81% | |
| APM-40S12 | 12 | 3330 | 84% | |
| APM-40S15 | 15 | 2660 | 85% | |
| APM-40S24 | 85 - 264 | 24 | 1660 | 84% |
| APM-40D12 | ±12 | ±1660 | 84% | |
| APM-40D15 | ±15 | ±1330 | 85% |
60W Letoto la AYM-60 Sephutheloana se Kentsoeng
Tataiso ea Khetho ea Mehlala
|
Nomoro ea Mohlala |
Keletso Voltage (VAC) | Khumo Voltage (VDC) | Output Current (mA)max |
Katleho |
| AYM-60S051 | 5.1 | 10000 | 84% | |
| AYM-60S12 | 12 | 5000 | 87% | |
| AYM-60S15 | 85 - 264 | 15 | 4000 | 87% |
| AYM-60S24 | 24 | 2500 | 87% | |
| AYM-60S48 | 48 | 1250 | 88% |
DC-DC CONVERTERS · AC-DC POWER SUPPLIES | 1-150W
KAKARETSO MAIKUTLO
DC-DC BAPHEKOLI
LITŠOANTŠISO TSA MATLA A AC-DC
TERENE TS'ELISO
DC-DC BAPHEKOLI
HO KHEHALA HO PHAHAMA
DC-DC BAPHEKOLI
TŠIRELETSO MONATE
DC-DC BAPHEKOLI
LITŠOANTŠISO TSA MATLA A AC-DC
Mokhoa oa puisano
- Sefela 3 | B-2550 Kontich | Belgium
- Mohala +32 (0)3 458 30 33
- info@alcom.be
- www.alcom.be
- Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | Netherlands
- Mohala +31 (0)10 288 25 00
- info@alcom.nl
- www.alcom.nl.
Litokomane / Lisebelisoa
 |
Alcom electronics 2024 Medical Power Solution Guide [pdf] Bukana ea Mosebelisi 2024, 2024 Tataiso ea Tharollo ea Matla a Bongaka, 2024, Tataiso ea Tharollo ea Matla a Bongaka, Tataiso ea Tharollo ea Matla, Tataiso ea Tharollo, Tataiso |
