Akuvox MD06 6 Likonopo tsa Mehala tse nang le Lebitso Tags

Litlhaloso

• Sehlahisoa: MD06/MD12
• Phepelo ea Matla: 12-24VDC 0.1A
• Mohala AWG: 26
• Ho hanyetsa: 128 ohm/km

Litaelo tsa Tšebeliso ea Sehlahisoa

Lisebelisoa Tse Hlokahalang Bakeng sa ho Tseba

• Katse Ethernet Cable
• Crosshead Screwdriver
• Motlakase oa Motlakase

Ho kenya Matla ho Sesebediswa
Sebelisa adaptara ea matla ea 12-24VDC 0.1A ho matlafatsa sesebelisoa.

Litlhoko tsa ho Hloma
Netefatsa hore sesebelisoa se kentsoe haufi le fensetere kapa lemati, ho qoba khanya ea letsatsi, khanya ea letsatsi ka lifensetere, kapa ho ba haufi le mehloli ea khanya.

Ditemoso le Ditemoso

1. Qoba ho ama core ea motlakase, adaptara ea motlakase, kapa sesebelisoa se nang le matsoho a metsi.
2. Qoba likarolo tse senyang 'me u sebelise feela adaptara ea matla le khoele tse tšoanelehang.
3. Qoba ho otla sesebelisoa ho thibela likotsi tsa hau.
4. Qoba ho tobetsa ka thata skrineng sa sesebelisoa.
5. Se ke oa pepesa sesebelisoa lihlahisoa tsa lik'hemik'hale.
6. Hloekisa holim'a sesebelisoa ka bonolo ka lesela le metsi ebe lesela le omileng.
7. Haeba ho hlaha boemo bo sa tloaelehang, tima sesebelisoa 'me u ikopanye le tšehetso ea tekheniki hang-hang.

Mehato ea ho Kenya

1. Kemiso ea Yuniti e Kholo:
   1. Kopanya R20K/B, MD06, le MD12 le bracket e ntseng e hola ho latela litaelo tse fanoeng.
   2. Tobetsa lisebelisoa ho sebelisa li-screws tsa lebota tsa M3x6.8 tse leshome le metso e 'meli.
   3. Kenya lithapo ka har'a li-terminals tsa MD06 le MD12, li hokahane le likhokahano tse tsamaellanang, boloka likhoele ka li-plug tsa rabara, 'me u fase poleiti e hatelletsoeng ka likurufu.
2. Ho kengoa ha Lebokose la Flush-mounting:
   1. Tlosa lebokose 'me u etse masoba libakeng tse tšoailoeng u sebelisa mochine oa motlakase oa 6mm.
   2. Kenya li-ankora tsa polasetiki ka har'a masoba le lithapo tsa loto ka masoba a lithapo.
   3. Tobetsa lebokose le kenyang metsi ka har'a lesoba la lisekoere khahlano le mabota 'me u le lokise ka li-screw.
3. Kenyelletso e Bonolo:
   1. Seha lesoba la lisekoere leboteng ka litekanyo tse boletsoeng.
   2. Tlatsa likheo ka samente kapa sekhomaretsi se sa senyeng.

LBH

• P: Ke lokela ho etsa eng haeba ke kopana le molumo o sa tloaelehang kapa monko o tsoang sesebelisoa?
  A: Tlosa sesebelisoa hang-hang 'me u ikopanye le Akuvox Technical Team bakeng sa thuso.
• P: A na nka sebelisa adaptara leha e le efe ea matla ho matlafatsa sesebelisoa?
  A: Ho khothalletsoa ho sebelisa 12-24VDC 0.1A adapter ea matla ho netefatsa hore sesebelisoa se sebetsa hantle.

Ho phutha

Pele o sebelisa sesebelisoa, hlahloba mohlala oa sesebelisoa 'me u netefatse hore lebokose le rometsoeng le kenyelletsa lintho tse latelang:

Lisebelisoa tsa MD06

Lisebelisoa tsa MD12

Lisebelisoa tsa R20K/R20B :

Lisebelisoa tse Dual-unit Device:

Lisebelisoa tsa lisebelisoa tse tharo:

SEHLAHISO FEELAVIEW

Pele O Qala

Lisebelisoa tse hlokahalang (ha li kenyelelitsoe lebokoseng le rometsoeng)

• Katse Ethernet Cable
• Crosshead Screwdriver
• Motlakase oa Motlakase

Moqtage le Litlhaloso tsa Hona Joale

Ho khothaletsoa hore u sebelise adaptara ea matla ea 12-24VDC 0.1A ho matlafatsa sesebelisoa.

Tafole ea boholo le thepa ea AWG
Ka kopo, latela lintlha tse nepahetseng ho kenya sesebelisoa:

Litlhoko

1. Beha sesebelisoa hole le khanya ea letsatsi le mehloli ea khanya ho thibela tšenyo e ka bang teng.
2. Se ke oa beha sesebelisoa sebakeng sa mocheso o phahameng, le mongobo kapa tikolohong e anngoeng ke matla a khoheli.
3. Kenya sesebelisoa sebakeng se bataletseng ka mokhoa o sireletsehileng ho qoba likotsi le tahlehelo ea thepa e bakoang ke ho oa ha sesebelisoa.
4. Se ke oa sebelisa kapa ua beha sesebelisoa haufi le lintho tse futhumatsang.
5. Haeba u kenya sesebelisoa ka tlung, ka kopo boloka sesebelisoa bonyane limithara tse 2 hole le leseli, le bonyane limithara tse 3 hole le fensetere le monyako.

Tlhokomeliso!

1. Ho netefatsa ts'ireletso, qoba ho ama konokono ea matla, adaptara ea matla, le sesebelisoa se nang le matsoho a metsi, ho kobeha kapa ho hula mokokotlo oa motlakase, ho senya likarolo life kapa life, 'me u sebelise adaptara ea matla le thapo ea matla feela.
2. Ela hloko hore ho ema sebakeng se tlas'a sesebelisoa haeba likotsi tsa botho li bakoa ke ho otla sesebelisoa.

E hlokolosi

1. Se ke oa kokota sesebelisoa ka lintho tse thata.
2. Se ke oa hatella ka thata skrineng sa sesebelisoa.
3. U se ke ua pepesa sesebelisoa lihlahisoa tsa lik'hemik'hale, tse kang joala, metsi a acid, likokoana-hloko, joalo-joalo.
4. Ho thibela hore sesebelisoa se se ke sa senyeha, etsa bonnete ba hore li-diameter tse nepahetseng le botebo ba masoba a screw. Haeba masoba a screw a le maholo haholo, sebelisa sekhomaretsi ho tiisa likurufu.
5. Sebelisa lesela le metsi le hloekileng holim'a sesebelisoa, ebe u hlakola bokaholimo ka lesela le omileng bakeng sa ho hloekisa sesebelisoa.
6. Haeba ho na le boemo bo sa tloaelehang ba sesebelisoa, ho kenyelletsa le molumo o sa tloaelehang le monko, ka kopo tima sesebelisoa 'me u ikopanye le Akuvox Technical Team hang-hang.

Wiring Interface

Ho kenya

Bakeng sa Triple-unit Sesebediswa

• Mohato oa 1: Ho kenya Lebokose la Flush-mounting

Tloaelehileng Tlhophiso

• Seha lesoba la lisekoere leboteng ka boholo ba 212•2s5•42mm (bophara'bophara• botebo).
  Hlokomela: Etsa bonnete ba hore likhoele tse ka har'a sekoti kapa u boloke tube ea cable.
  • Arola likoti tse chitja tsa lebokose.
  • Kenya li-flush-mounting boxes ka har'a lesoba la lisekoere 'me u tšoaee likoti tse robeli.
• Tlosa lebokose 'me u sebelise 6mm ea ho phunya motlakase ho etsa masoba sebakeng se tšoailoeng.
• Kenya li-ankora tsa polasetiki tse robeli ka mekoting.
  • Lithapo tsa loto li kena ka masoba a lithapo.
  • Tobetsa lebokose le kenyang metsi ka har'a lesoba la lisekoere, ho etsa bonnete ba hore mapheo a haufi le lebota.
  • Sebelisa li-screw tse robeli tsa ST4x20 ho lokisa lebokose le kenyang metsi.
    Hlokomela:
    • Lebokose le kenyang motlakase ha le behiloe holimo ho feta lebota, le ka bang tlase ho 0-3mm.
    • Lebokose la ho sekamela ha lebokose le feta 2°.
• Tlosa lebokose 'me u sebelise 6mm ea ho phunya motlakase ho etsa masoba sebakeng se tšoailoeng.

Kenyelletso e bonolo (e nang le khanyetso e tlase ea tšenyo ea thepa)

• Seha lesoba la lisekoere leboteng ka boholo ba 212'286'42mm (height'width'depth).
  Hlokomela: Etsa bonnete ba hore likhoele tse ka har'a sekoti kapa u boloke tube ea cable.
  • Tlatsa lekhalo le pakeng tsa lebota le lebokose le phallisang ka samente kapa sekhomaretsi se sa senyeng.
  • Hlatsoa bokantle ba ka ntle ba lekhalo ka lisebelisoa tse tšoanang tsa khabiso joaloka marako a potolohileng.
  • Emela hore samente e ome pele u fetela mohatong o latelang.
    Hlokomela: Ho thibela metsi ho kena sekoahelong se ka morao sa mohala oa monyako, ho kgothaletswa ho tlatsa likheo tse pota-potileng ka thepa e sa keneleng metsi.
• Ho kenngoa ha "flush-mounting box" ho etsoa.

Kemiso ea Yuniti e ka Sehloohong

• Kopanya R20K/B, MD06, le MD12 le bracket e ntseng e phahama ho latela tataiso e bontšitsoeng setšoantšong.
• Sebelisa li-screws tse kenyang leboteng tsa M3x6.8 tse leshome le metso e 'meli ho tiisa lisebelisoa.

1. Bakeng sa ho kenya habonolo, fanyeha sesebelisoa lebokoseng / bracket u sebelisa thapo.
2. Tobetsa reng ea ho koala ka har'a groove e lumellanang

• Kenya thapo ea 4-Pin ho terminal ea MD06 le MD12.
• Etsa hore likhoele li kene ka sekoahelong sa lithapo, li hokahane le li-interfaces tse tsamaellanang ha ho hlokahala (bakeng sa lintlha, sheba "Wiring Interface").
• Tlamella plug ea rabara (M) ho sesebelisoa sa R20K/B le rabara plug (S) ho sesebelisoa sa MD06 le MD12 bakeng sa ho tiisa likhoele.
• Fasten ho tiisa poleiti ka li-screws tse peli tsa M2.5×6 crosshead.

Koahela sekoaelo sa lithapo ka li-screws tsa crosshead tsa M2.Sx6.

Ho hlomamisa sesebelisoa

Sebelisa sekontiri sa M4 Torx ho tiisa sesebelisoa ka li-screws tse 'nè tsa M4x15 Torx hlooho. Kemiso e phethiloe.

Bakeng sa Dual-unit Device

Mohato oa 1: Ho kenya Lebokose la Flush-mounting

Tloaelehileng Tlhophiso

• Seha lesoba la lisekoere leboteng ka boholo ba 209•1ss•4omm (bophara ba bophahamo'bophara*).
  Tlhokomeliso: Etsa bonnete ba hore likhoele tse ka har'a lesoba kapa u boloke tube ea cable.
  • Arola likoti tse chitja tsa lebokose.
  • Kenya li-flush-mounting boxes ka har'a lesoba la lisekoere 'me u tšoaee likoti tse 'nè tsa likoti.
• Tlosa lebokose 'me u sebelise 6mm ea ho phunya motlakase ho etsa masoba sebakeng se tšoailoeng.
• Kenya liankora tse 'nè tsa mabota a polasetiki ka mekoting.
  • Lithapo tsa loto li kena ka masoba a lithapo.
  • Tobetsa lebokose le kenyang motlakase ka har'a lesoba la lisekoere, ho etsa bonnete ba hore mahlakore a haufi le lebota.
  • Sebelisa li-screw tse 'nè tsa ST4x20 ho lokisa lebokose le kenyang motlakase.
    Hlokomela:
    • Lebokose le kenyang motlakase ha le behiloe holimo ho feta lebota, le ka bang tlase ho 0-3mm.
    • Lebokose la ho sekamela ha lebokose le feta 2°.
• Ho kengoa lebokoso le kenyang motlakase ho entsoe.

Kenyelletso e bonolo (e nang le khanyetso e tlase ea tšenyo ea thepa)

• Seha lesoba la lisekoere leboteng ka boholo ba 209 * 188 * 40mm (bophahamo * bophara * botebo).
  Hlokomela: Etsa bonnete ba hore likhoele tse ka har'a sekoti kapa u boloke tube ea cable.
  • Tlatsa lekhalo le pakeng tsa lebota le lebokose le phallisang ka samente kapa sekhomaretsi se sa senyeng.
  • Hlatsoa bokantle ba ka ntle ba lekhalo ka lisebelisoa tse tšoanang tsa khabiso joaloka marako a potolohileng.
  • Emela hore samente e ome pele u fetela mohatong o latelang.
    Hlokomela:
    Ho thibela metsi ho kena sekoahelong se ka morao sa mohala oa monyako, ho kgothaletswa ho tlatsa likheo tse pota-potileng ka thepa e sa keneleng metsi.
    Ho kenngoa ha "flush-mounting box" ho etsoa.

Kemiso ea Yuniti e ka Sehloohong

• Kopanya R20K/R20B le MD06/MD12 le bracket e ntseng e phahama ho latela tataiso e bontšitsoeng setšoantšong.
• Sebelisa li-screw tse robeli tsa M3x6.8 leboteng ho tiisa lisebelisoa

1. Bakeng sa ho kenya habonolo, fanyeha sesebelisoa lebokoseng / bracket u sebelisa thapo.
2. Tobetsa reng ea ho koala ka har'a groove e lumellanang.

• Kenya thapo ea 4-Pin ho terminal ea MD06/12.
• Etsa hore likhoele li kene ka sekoahelong sa lithapo, li hokahane le li-interfaces tse tsamaellanang ha ho hlokahala (bakeng sa lintlha, sheba "Wiring Interface").
• Tlamella plug ea rabara (M) ho sesebelisoa sa R20K/B le rabara (S} ho sesebelisoa sa MD06/12 bakeng sa ho tiisa likhoele.
• Fasten sealing plate le sekwahelo sa wiring se nang le M2.5×6 crosshead screws.

Ho hlomamisa sesebelisoa

Sebelisa wrench ea Torx ho tiisa sesebelisoa ka li-screws tse 'nè tsa M4x15 Torx hlooho. Kemiso e phethiloe.

Kopo ea Topology ea Kopo

Teko ea Sesebelisoa

1. Ka kopo, netefatsa boemo ba sesebelisoa ka mor'a ho kenya:
   Marang-rang: Sheba aterese ea IP ea sesebelisoa le boemo ba marang-rang. Marang-rang a sebetsa hantle haeba aterese ea IP e fumaneha. Haeba ho se aterese ea IP e fumanoang, R20X e tla phatlalatsa "IP 0.0.0.0".
   Bakeng sa R20K: Tobetsa *3258* ho fumana aterese ea IP.
   1. Bakeng sa R20B: Tobetsa Nako e telele Konopo ea ho Letsa ea pele bakeng sa metsotsoana e 5.
2. lntercom: Tobetsa Konopo ea ho letsa ho letsa. Tlhophiso ea mohala e nepahetse haeba mohala o atlehile.
3. Taolo ea ho kena: Sebelisa karete ea RF e lokiselitsoeng esale pele ho notlolla lemati.

Tiisetso

1. Tiisetso ea Akuvox ha e koahele tšenyo e entsoeng ka boomo kapa tšenyo e bakiloeng ke ho kenngoa ho sa lokelang.
2. Se ke oa leka ho fetola, ho fetola, ho hlokomela, kapa ho lokisa sesebelisoa u le mong. Tiisetso ea Akuvox ha e sebetse litšenyehelong tse bakoang ke mang kapa mang eo e seng moemeli oa Akuvox kapa mofani oa litšebeletso ea lumelletsoeng oa Akuvox. Ka kopo ikopanye le Akuvox Technical Team haeba sesebelisoa se hloka ho lokisoa.

Fumana Thuso
Bakeng sa thuso kapa thuso e 'ngoe, ikopanye le rona ho:
https://ticket.akuvox.com/
support@akuvox.com
Skena khoutu ea QR ho fumana livideo tse ling, litataiso le lintlha tse ling tsa sehlahisoa.

Tlhahisoleseling

Ho lumeloa hore boitsebiso bo fuperoeng ke tokomane ena bo nepahetse ebile bo tšepahala nakong ea khatiso. Tokomane ena e ka fetoha ntle le tsebiso, ntlafatso efe kapa efe tokomaneng ena e ka ba viewed ho Akuvox's websebaka: http://www.akuvox.com © Copyright 2023 Akuvox Ltd. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

Akuvox MD06 6 Likonopo tsa Mehala tse nang le Lebitso Tags [pdf] Bukana ea Mosebelisi MD06 6 Likonopo tsa Mehala tse nang le Lebitso Tags, MD06 6, Likonopo tsa Letsa tse nang le Lebitso Tags, Likonopo tse nang le Lebitso Tags, Lebitso Tags

Litšupiso

• Bukana ea Mosebelisi