Logitech PRO X SUPERLIGHT 2 GPW3 Wireless Gaming Mouse User Manual

1. Selelekela

The Logitech PRO X SUPERLIGHT 2 GPW3 is a next-generation wireless gaming mouse designed for professional-level performance. It features advanced LIGHTSPEED wireless technology, the highly accurate HERO2 sensor, and innovative optical-mechanical hybrid switches for superior speed and precision. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. Seta

Follow these steps to set up your Logitech PRO X SUPERLIGHT 2 GPW3 Wireless Gaming Mouse:

1. Tlosa Mouse: Carefully remove the mouse and all accessories from the packaging.
2. Connect the LIGHTSPEED Adapter: Locate the USB LIGHTSPEED adapter. Plug it into an available USB port on your computer. For optimal signal strength, use the included adapter extension cable to position the receiver closer to the mouse.
3. Matla ho Mouse: Turn on the mouse using the power switch located on the underside of the mouse.
4. Ho tjhaja ha Pele: For first-time use, it is recommended to fully charge the mouse. Connect the USB A to USB C charging/data cable to the mouse and your computer's USB port.
5. Install Logitech G HUB Software: Download and install the Logitech G HUB software from the official Logitech website (logitechg.com/downloads). This software is essential for customizing DPI settings, button assignments, and other advanced features.

3. Litaelo tsa Ts'ebetso

The PRO X SUPERLIGHT 2 GPW3 is designed for intuitive use with advanced customization options.

• Khokahano e se nang Waele: The mouse utilizes LIGHTSPEED wireless technology for a stable, zero-sense delay connection. Ensure the USB LIGHTSPEED adapter is connected to your computer.
• Bophelo ba Battery: The mouse offers approximately 95 hours of battery life at a 1kHz refresh rate. A green indicator light typically signifies sufficient charge.
• Phetoho ea DPI: Use the dedicated DPI adjust button (if configured) or the Logitech G HUB software to change the mouse's sensitivity (DPI). The HERO2 sensor supports up to 32,000 DPI.
• Likonopo tseo u ka li khethang: The mouse features 5 programmable buttons. Use the Logitech G HUB software to assign custom commands, macros, or system functions to these buttons.
• Sekhahla sa Likhetho: The GPW3 supports up to a 4K (4000Hz) polling rate, providing extremely fast response times. This feature can be configured via Logitech G HUB.

4. Tlhokomelo

Ho netefatsa bophelo bo bolelele le ts'ebetso e nepahetseng ea mouse ea hau, latela litataiso tsena tsa tlhokomelo:

• Ho hloekisa: Use a soft, dry, lint-free cloth to clean the mouse's surface. Avoid using harsh chemicals or abrasive materials.
• Ho tjhaja: Recharge the mouse using the provided USB-C cable when the battery indicator shows low power. Avoid overcharging for extended periods.
• Polokelo: Ha e sa sebelisoe, boloka toeba sebakeng se hloekileng, se omileng hole le mocheso o feteletseng le khanya ea letsatsi e tobileng.
• PTFE Foot Pads: The mouse comes with Zero-Add PTFE foot pads for smooth gliding. If these wear out over time, replacement pads may be available from Logitech support.

5. Ho rarolla mathata

If you encounter issues with your mouse, try the following solutions:

• Ha ho Khokahano:
  - Ensure the mouse is powered on.
  - Verify the USB LIGHTSPEED adapter is securely plugged into a working USB port.
  - Try plugging the adapter into a different USB port.
  - Ensure the adapter is within close proximity to the mouse.
  - Re-pair the mouse with the adapter using Logitech G HUB if necessary.
• Lag or Disconnections:
  - Move the USB LIGHTSPEED adapter closer to the mouse, ideally using the extension cable.
  - Ensure there are no strong wireless interference sources nearby (e.g., Wi-Fi routers, other wireless devices).
  - Check for firmware updates via Logitech G HUB.
• Mouse Not Charging:
  - Ensure the USB-C charging cable is properly connected to both the mouse and a power source (computer USB port or wall adapter).
  - Try a different USB port or charging cable.
  - Check if the charging port on the mouse is clean and free of debris.
• Buttons or Scroll Wheel Not Responding:
  - Check button assignments in Logitech G HUB.
  - Restart your computer and the mouse.
  - Reinstall Logitech G HUB software.

6. Litlhaloso

7. Malebela a Mosebedisi

• Eketsa Phetoho: Always use the Logitech G HUB software to unlock the full potential of your mouse, including precise DPI settings, button remapping, and macro creation.
• Ts'ebetso e nepahetseng ea Wireless: For the most stable and responsive wireless connection, ensure the LIGHTSPEED USB adapter is placed as close as possible to the mouse, ideally using the included extension cable.
• Taolo ea Betri: Keep your mouse charged to avoid interruptions during critical gaming moments. The long battery life of 95 hours means less frequent charging.
• Bonnete: To ensure you have a genuine Logitech product, purchase from authorized retailers and register your product on the official Logitech websebaka.

8. Tiisetso le Tšehetso

Logitech stands by the quality of its products. Your Logitech PRO X SUPERLIGHT 2 GPW3 Wireless Gaming Mouse is a Certified Original product. For any warranty claims or technical support, please refer to the official Logitech support channels. This includes assistance with product issues, troubleshooting, and general inquiries.

Logitech is committed to Security & Privacy, ensuring your personal details are safe and not shared with third parties without your consent. Additionally, the product is backed by a Fast Delivery & Get Refunds for Any Issues policy, providing peace of mind regarding product integrity.