Advantage MINI-TROL Reverse Osmosis Controller

Ho kenya

1. Netefatsa hore molaoli o lokiselitsoe molumo o nepahetsengtage: 120, 240 kapa 24-volt. Sheba letšoao la ID, hammoho le laibole e ka holim'a transformer e hlalosang voltage. (Sheba setšoantšo sa 1)
2. The RO pump motor kapa motor starter le solenoid valves li tlameha ho ba tsa molumo o tšoanangtage: 120, 240, kapa 24-volt.
3. Netefatsa hore (3) matshwao a ho kenya - switjha ya kgatello, switjha ya boemo ba tanka, le switjha ya pretreat - kaofela ke tlhophiso e tshwanang, hangata e a bulwa KAPA e kwalwa ka tlwaelo.
4. Netefatsa li-setting tse lakatsehang tsa jumper bakeng sa ts'ebetso ea hau. Li-jumpers ke tsa fektheri tse behiloeng ho Position B Auto Reset (e holofalitsoe), Pressure Fault Retry (e holofetse), Tank Full restart time (metsotsoana e 2), mofuta oa Input contact (NC, e buletsoeng ho sebetsa), 'me e tletse tanka e tletse. Haeba u lakatsa ho fetola tšebetso efe kapa efe ea ho qhomela, suthela seqhomane seo ho Boemo ba A. (Sheba Lethathamo leqepheng le latelang.)
5. Haeba terata e fanoa le molaoli enoa, tlola karolo ena 'me u tsoele pele ho Mohato oa 6. Haeba ho hlokahala mohala ho molaoli, tsoela pele ka tsela e latelang:
   • A. Tlosa sekoahelo se koaletsoeng.
   • B. Tšoaea le ho phunya masoba a hlokahalang a ho kena ka motlakase sebakeng se se nang letho.
   • C. Tlosa lithapo tse hlokahalang ho li-terminal strips kamoo ho hlokahalang. (Sheba setšoantšo sa 1) Terminal e 'ngoe le e' ngoe e ngotsoe bakeng sa khokahanyo e nepahetseng. Terminal strip P1 e phahame haholotage bakeng sa matla, enjene, le solenoid e kenang. Sebelisa terata e nepahetseng ea li-conductor tse 3 bakeng sa sesebelisoa.
   • TLHOKOMELO: Molaoli o fuoe lintlha tse 20-amp moroalo o felletseng. Terminal strip P2 e na le matla a tlasetage bakeng sa matšoao a ho kenya tanka e tletse, bothata ba khatello, le ho notlela pele. Sebelisa thapo e nyane ea conductor ea gauge 2 bakeng sa likhokahano tsena tsa terata.
6. Beha le ho hloma sebaka se kampetsoeng sebakeng seo u se batlang.
7. Hokela lithapo tsohle ho lisebelisoa tse loketseng. Se ke oa hokela mohloling oa motlakase ka nako ena.
8. Kopanya sebaka se kampetsoeng hape, etsa bonnete ba hore oa khoehlisa 'me u siee terata e khopameng ka har'a sebaka se kampetsoeng.
9. Tlosa sesebelisoa sa motlakase sebakeng sa OFF.
10. Hokela terata ea matla 120, 240, kapa 24-volt mohloling oa eona.
11. Tsoela pele ho bulela switch ea motlakase 'me u leke yuniti e phethiloeng ha ho hlokahala.
12. Sheba boemo ba 'mala oa LED ho netefatsa boemo ba sistimi.

JUMANE	BOEMO B	BOEMO A
J4	TLHOKOMELA MOSEBETSI OA KHOLOA	TLHOKOMELA MOSEBETSI OA
J5	LEKANG KHOLOA	LEKANG THUSO
J6	2-SEC HO QALA BOSHA	15-MIN. QALA HAPE
J7	HA HO MATS'OANE	NC LITŠOANTŠISO

TLHOKOMELO: Lintho tsohle tse kenyang li-switches li tlameha ho ba tse omileng feela. Haeba voltage sebelisoa ho tsena tse kenang, ho tla baka tšenyo ho molaoli. Bakeng sa matla a nang le lisebelisoa tse sa nke lehlakore le tse chesang, L1 e chesa 'me L2 ha e nke lehlakore.

Ts'ebetso ea sistimi

Ha sesebelisoa sa matla se buletsoe, boemo ba LED bo tla khantša Botala, valve e kenang ka OPEN le pompo ea RO e tla qala. Tlas'a ts'ebetso e tloaelehileng, yuniti ea RO e tla sebetsa ho fihlela: (A) tanka ea polokelo e tletse (boemo ba LED Amber) kapa (B) Pretreat lockout e etsahetse (boemo ba LED e khanyang Green). Ha A kapa B e hlakotsoe, ka mor'a ho lieha ha nako, RO e tla qala hape, 'me boemo ba LED bo tla khutlela ho Green. Setting ea Jumper J-6 e khetha tieho ea nako ea ho qala bocha ea metsotsoana e 2 kapa e 15. Holim'a lets'oao la alamo bakeng sa Pressure Fault, boemo ba LED bo tla fetola RED, pompo ea RO e tla emisa, 'me valve e kenang e tla koala. Haeba jumper J-4 le J-5 li Maemong a B (a holofetse), boemo ba LED bo tla benya RED mme yuniti ea RO e ke ke ea qala bocha ho fihlela Power Switch e koetsoe ka letsoho ebe e ON ho seta yuniti bocha. Haeba jumper J-4 e le Boemong ba A (ho seta bocha ka boits'oaro), metsotso e meng le e meng e 60 RO e tla qala ebe e emisa hape haeba phoso ea khatello e tsoela pele. Haeba J-5 e le Boemong ba A (khatello ea phoso leka hape), yuniti ea RO e tla leka ho qala hape kamora metsotsoana e 30, ebe metsotso e 5, ebe metsotso e 30. Haeba alamo ea khatello e e-s'o hlakoloe ka mor'a teko ea boraro, yuniti ea RO e tla lula e tima ho fihlela e tsosolosoa ka letsoho. Haeba jumper J-4 le J-5 li le Boemong ba A, ka mor'a boemo ba khatello ea khatello, RO yuniti e tla tsoela pele ho leka ho qala bocha ka mor'a potoloho e 'ngoe le e' ngoe ea metsotso e 60 ho fihlela motsoako oa khatello o hlakotsoe.

TLHOKOMELO

1. Ho na le lipotoloho tse phelang ka hare ho molaoli esita le ha sesebelisoa sa matla se ka pele se le boemong ba OFF. Le ka mohla u se ke ua bula phanele e ka pele ntle le ho khaola motlakase pele ho tsoa. Lilaoli tse reriloeng esale pele li fanoa ka thapo ea matla ea maoto a 8, 18 AWG e nang le plug ea setaele sa USA. Ho hlokahala mokhanni oa #1 oa Phillips ho bula karolo e ka pele.
2. Vol e tlasetaglithapo tsa elektronike (li-probes, switch switch, meter ea metsi, joalo-joalo) ha lia lokela ho tsamaisoa ka pompo e nang le vollumo e phahameng.tage (joaloka 115VAC) lithapo.
3. Le ka mohla u se ke ua leka ho hokahanya likhokahano ho molaoli ntle le ho qala ka ho khaola motlakase ho tsoa setsing.
4. Se ke oa thibela phihlello ea ho hakolla motlakase nakong ea ho kenya le ho kenya.
5. Molaoli o lokela ho hokahana le sekhechana sa eona se ikhethileng sa potoloho, 'me bakeng sa litholoana tse ntle, mobu e lokela ho ba mobu oa' nete, o sa arolelanoeng. Boiteko bofe kapa bofe ba ho iphapanyetsa motheo bo tla beha polokeho ea basebelisi le thepa kotsing.
6. Ho kenngoa ha motlakase oa molaoli ho tlameha ho etsoa ke basebetsi ba koetlisitsoeng feela le ho lumellana le mekhoa eohle e sebetsang ea Naha, Naha le ea Libaka.
7. Ho sebetsa ha sehlahisoa sena ka tsela e sa boleloang ke moetsi ho ka baka tšenyo ea thepa kapa batho.
8. Qoba ho phahama libakeng tse pepesetsang selaoli mahlaseling a letsatsi, mouoane, ho thothomela, ho qhalana ha metsi kapa mocheso o feteletseng; ka tlase ho 0°F (-17.8°C) kapa ho feta 120°F (50°C). EMI(electromagnetic interference) ho tsoa liphatlalatsong tsa seea-le-moea le lienjene tsa motlakase le tsona li ka baka tšenyo kapa tšitiso mme li lokela ho qojoa.

Fumana Advantage ka Lisebelisoa tsa ho Hlatsoa Metsi

AdvantagLitaolo tsa e li ka u fa Advantage ka lihlahisoa, tsebo le tšehetso litlhoko tsohle tsa hau tsa lisebelisoa tsa ho hloekisa metsi.

• Cooling Tower Controllers
• Boiler Fokotsa Balaoli
• Fokotsa Liphutheloana tsa Valve
• Li-valve tse tsoang mali
• Limithara tsa Metsi
• Lipompo tsa Metering
• Corrosion Coupon Racks
• Litanka tsa Tharollo
• Mekhoa e tiileng ea ho fepa
• Bypass Feeders
• Lisebelisoa tsa Sefe
• Sistimi ea phepelo ea Glycol
• Mekhoa e entsoeng esale pele

Litokomane / Lisebelisoa

Advantage MINI-TROL Reverse Osmosis Controller [pdf] Tlhophiso Tataiso MINI-TROL Reverse Osmosis Controller, MINI-TROL, Reverse Osmosis Controller, Osmosis Controller, Controller

Litšupiso

• Bukana ea Mosebelisi