Seva ea Ace Computers PW-GT20

LIEKETSENG

Lintlha tse bukeng ena ea Mosebelisi li entsoe hape ka hlokoviewed mme ho lumeloa hore e nepahetse. Morekisi ha a nke boikarabello bakeng sa liphoso leha e le life tse ka har'a tokomane ena 'me ha a etse boitlamo ba ho ntlafatsa kapa ho boloka boitsebiso bo bukeng ena, kapa ho tsebisa motho leha e le ofe kapa mokhatlo ofe kapa ofe ka lintlafatso.

Lemoha ka kopo: Bakeng sa mofuta oa morao-rao oa bukana ena, ka kopo sheba rona website at www.acecomputers.com.

Ace Computers e na le tokelo ea ho etsa liphetoho ho sehlahisoa se hlalositsoeng bukeng ena ka nako efe kapa efe ntle le tsebiso. Sehlahisoa sena, ho kenyeletsoa le software le litokomane, ke thepa ea Ace Computers le/kapa bafani ba eona ba laesense, 'me e fanoa feela ka laesense. Tšebeliso efe kapa efe kapa tlhahiso efe kapa efe ea sehlahisoa sena ha e lumelloe, ntle le ha ho lumelletsoe ka ho hlaka ke lipehelo tsa laesense e boletsoeng.

HA HO LE TSATSAHALO, Likhomphutha tsa Ace TLA IKOLAMORA BAKENG SA LITABA TSE TŠEOANG, TSE TŠEBELANG, TSE KHETHEHILENG, TSA TSATSI, TSE BOHLOKO KAPA TSE LATELANG TSE TSOANG HO SEBELISA KAPA HO HLOKA HO SEBEDISA SEHLAHISO ENA KAPA LITOKOMANO, LE HA HO TLA ETSETSOA KA MOKGWA OA. HAHOLO-HOLO, SUPER MICRO COMPUTER, INC. HA E TLA BA LE MOIKARATO BAKENG SA HARDWARE, SOFTWARE, KAPA DITATI E BOLOKENG KAPA SEBEDISWA LE SEHLAHISO, HO KENYELETSA LITŠEnyehelo TSA HO LOKETSA, HO FETOTSA, HO TLHOKOMELA, HO KENYA KAPA HO HLAHALA KAPA,
KAPA DATA.

Likhohlano life kapa life tse hlahang lipakeng tsa moetsi le moreki li tla laoloa ke melao ea Setereke sa Cook seterekeng sa Illinois, USA. State of Illinois, County of Cook e tla ba sebaka se ikhethileng sa ho rarolla liqabang tse joalo. Likoloto tsohle tsa Ace Computer bakeng sa likopo tsohle li ke ke tsa feta theko e lefuoang bakeng sa sehlahisoa sa Hardware.

Polelo ea FCC: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa indasteri. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo ea moetsi, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ts'ebetso ea thepa ena sebakeng sa bolulo e kanna ea baka tšitiso e kotsi, moo ho tla hlokahala hore u lokise tšitiso eo ka litšenyehelo tsa hau.

Lihlahisoa tse rekisoang ke Ace Computers ha lia rereloa ebile li ke ke tsa sebelisoa lits'ebetsong tsa ts'ehetso ea bophelo, lisebelisoa tsa bongaka, lits'ebeletso tsa nyutlelie kapa lits'ebetso, lifofane, lisebelisoa tsa sefofane, lisebelisoa tsa puisano tsa sefofane / tsa maemo a tšohanyetso kapa lits'ebetso tse ling tsa bohlokoa tseo ho se sebetse ha tsona ho lebelletsoeng. ho baka kotsi e kholo kapa tahlehelo ea bophelo kapa tšenyo e mpe ea thepa. Ka hona, Ace Computers e hana molato leha e le ofe, 'me ha moreki a lokela ho sebelisa kapa ho rekisa lihlahisoa tse joalo bakeng sa ho sebelisoa lits'ebetsong tse kotsi haholo, o etsa joalo ka ho feletseng ka kotsi ea hae. Ho feta moo, moreki o lumela ho qosa, ho sireletsa le ho boloka Ace Computers e se kotsi bakeng sa liqoso life kapa life, litlhoko, liketso, linyeoe, le linyeoe tsa mofuta ofe kapa ofe tse hlahang kapa tse amanang le tšebeliso kapa thekiso e kotsi haholo.

Ntle le haeba o kopa le ho fumana tumello e ngotsoeng ho tsoa ho Ace Computers, o kanna oa se kopitse karolo efe kapa efe ea tokomane ena. Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso. Lihlahisoa tse ling le lik'hamphani tse boletsoeng mona ke matšoao a khoebo kapa matšoao a ngolisitsoeng a lik'hamphani tse fapaneng kapa ba nang le matšoao.
E hatisitsoe United States of America
Hlokomela: Bukana ena ea Mosebelisi e nkiloe ho SuperMicro User Manual, ka tumello e tsoang ho SuperMicro, ho kenyelletsa litokomane tse khethehileng tsa ACE Computers.

Mabapi le Bukana ena

Bukana ena e ngoletsoe litsebi tse kopanyang tsamaiso le litsebi tsa PC. E fana ka leseli le amanang le EPEAT bakeng sa li-server tse ngolisitsoeng tsa ACE Computers EPEAT.

Lintlha
Haeba u na le lipotso mabapi le bukana ena kapa sistimi ea seva, ka kopo ikopanye le sehlopha sa rona sa ts'ehetso ka leqephe la Ace Computers Support https://acecomputers.com/support/ . Bukana ena e ka ntlafatsoa nako le nako ntle le tsebiso.
Ka kopo sheba Ace Computers websaete bakeng sa lintlafatso tse ka bang teng molemong oa ntlafatso ea matsoho.

Khaolo ea 1 - Tlhahisoleseding ea Tlhahlobo / Tšebelisano

Operating Condition Class

Sehlopha sa boemo ba ts'ebetso ke A2. Ho ipapisitsoe le liphetho tsa liteko, ho ile ha etsoa qeto ea hore hafeela seva se sebetsa ka har'a Allowable Range joalo ka ha ho boletsoe "Operating Condition A2" (e boletsoeng tafoleng e ka tlase), ho ke ke ha e-ba le lintho tse amang tsamaiso mme li tla tsoelapele ho sebetsa ka tsela e reretsweng bophelo bohle ba sehlahisoa.

Nako e lebeletsoeng ea bophelo ba sistimi ea seva ke lilemo tse robeli ka karolelano. Haeba seva se sebetsa lihora tse 18 ka letsatsi, matsatsi a supileng ka beke ka lilemo tse robeli, lihora tsa ts'ebetso tseo seva e ka li sebelisang sebakeng se lumelletsoeng sa sehlopha sa A2 ntle le ho ameha ka lintho tse bonahalang e ka ba lihora tse 52,560.

Khaolo ea 2 - Litaelo tsa Phallo ea Tsamaiso ea Litšoantšo

Khaolo ea 8 e reretsoe ho fana ka tataiso ho batho ba sebelisang lintho tse sebelisoang hape ka boteng ba lisebelisoa le likarolo boemong ba sehlahisoa/lelapa, ho latela Article 15 ea EU WEEE Directive 2012/19/EU. Tlhahisoleseding e fanoeng e boetse e lokela ho thusa ho lebisa li-recyclers mekhoeng e nepahetseng ea ho tlosa likarolo le litaelo tse akaretsang tsa ho qhaqholla. Khaolo ena e boetse e hlakisa lintho tse itseng, metsoako le likaroloana tse tlamehang ho ntšoa karolong efe kapa efe e bokeletsoeng ka thoko ea litšila tsa elektroniki, 'me li tla lahloa kapa ho khutlisoa ho latela Directive 2008/98/EC.

Ka kopo hlokomela: Litšoantšo tsohle tse litaelong tse ka tlase tsa ho qhaqhoa ke tsa pontšo feela. Tsamaiso le likarolo tse bontšitsoeng karolong ena ke moemeli sample.

TLHOKOMELISO: Kamehla tima sistimi 'me u lokolle lithapo tsa motlakase pele u harola sistimi!

Lisebelisoa tsa polokelo ea data

Sebaka: Li-server li tsebahala haholo ka polokelo ea tsona le ho fapanyetsana ha tsona, ka har'a mofuta ona oa tora ea seva ho na le matla a polokelo a kahare le kantle. Polokelo ea ka hare e bonoa setšoantšong se ka tlase. Mefuta e meng e kanna ea kenyelletsa polokelo e feto-fetohang e ka fihlellehang ho tsoa phanele e ka pele. Li-server tse ling li kanna tsa ba le polokelo ea SSD, mofuta ona oa polokelo o ka fumaneha ho board ea mama. Ka kakaretso e bataletse, e bapile le boto, ho fapana le ho ba lehlakoreng le nepahetseng. Lisebelisoa tse ngata tse tloaelehileng li kenya ntlha e le 'ngoe ea SSD ka har'a slot leboteng la bo-mme ha ntlha e 'ngoe e ts'oaroe ka sekurufu se senyenyane.
Mofuta le palo ea li-fastenings: HDD = Latch e le 'ngoe (1) le li-screw tse' nè (6) tsa Phillips, SSD = (1) Phillips screw.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa:

• Mohato oa 1: HDD (3.5”) = Tobetsa konopo ea tokollo ho sejari. Tsamaisa sepalangoang ho ea ho chassis. Tšoara sets'oants'o 'me u hule se tsamaisang koloi ka ntle ho khoho ea sona, hang ha mokhanni oa koloi a tsoile koung, li-screw tsa Phillips li ka tlosoa.
  
• Mohato oa 2: SSD (2.5 ”) = Tseba SSD ka har'a boardboard, tlosa screw, 'me u hule ka kotloloho sebakeng se ts'oanang ho tlosa SSD sekoting sa leboto la bo-mme.
  Kalafo e Khethehileng / Ts'ebetso e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Ho na le boto ea potoloho e hatisitsoeng e kholo ho feta 10 square centimeters, e le 'ngoe ka har'a HDD le e' ngoe ka har'a SSD e lokelang ho tlosoa ka thoko ho sesebelisoa sa polokelo ea data. e tla lahloa kapa ea khutlisoa ho latela Directive 2008/98/EC.
  

Mohopolo
Sebaka: Li-module tsa memori li fumaneha lebopeng la li-server, palo ea li-module tsa memori li ka fapana ho ea ka tlhophiso ea yuniti empa hangata li fumaneha ka lipara tsa 2.
Mofuta le palo ea li-fastenings: Li-latches tse peli (2) ka module ea memori.
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa: Tobetsa li-tab tsa tokollo ka bobeli lipheletsong tsa mojule oa memori ho e notlolla. Hang ha module e lokolotsoe, e tlose ho slot ea memori.
Selection Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Memory stick ke boto ea potoloho e hatisitsoeng e kholo ho feta 10 sq. cm. 'me e tla lahloa kapa ho khutlisetsoa morao ho latela Melao ea EU 2008/98/EC.

processor

Sebaka: Motlakase o fumanoa lebokoseng la li-server tsa seva. Joalokaha ho bontšitsoe setšoantšong se ka tlase, processor e teng tlas'a mocheso oa mocheso. The heatsink e ka shebahala joalo ka sesebelisoa sa phetisetso ea mocheso oa mofuta oa fin, kapa fan e potolohang e nang le poleiti ea phetisetso ea mocheso. Ho ka ba le processor e fetang e le 'ngoe ka boardboard, hangata lipakeng tsa 1-4.
Mofuta le palo ea li-fastenings: Li-screws tse 'nè (4) tsa T30 tsa Torx.
Lisebelisoa tse hlokahalang: Screwdriver e nang le T30 Torx bit.
Mokhoa: Tlosa li-screw ka tatellano ea 4, ebe 3, ebe 2, ebe 1, joalo ka ha ho tšoailoe papisong e ka tlase. Kamora ho tlosa li-screws, phahamisa mochini oa heatsink oa processor ho tloha soketeng ea processor. Tlosa likhutlo tsa A le B, ebe C le D tsa latch. Sututsa latch ho tloha tlase.
Kalafo e Kgethehileng/Tshwaro e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: CPU ha e na liboto tsa potoloho tse hatisitsoeng.

Motherboard
Sebaka: Letlapa la mama ke PCB e kholo ka ho fetisisa tlhophisong ea seva, hangata e fumaneha bohareng ba yuniti. Tloaelo e tloaelehileng e tla ba ho tlosa likaroloana tsohle, li-peripheral, le li-add-on ho boardboard pele ho tlosoa motherboard bakeng sa ho sebetsa.
Mofuta le palo ea li-fastenings: 14 Phillips screws.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa: Tlosa li-screw tsohle tse 14 tsa Phillips. Phahamisa boardboard ho tloha setsing sa eona.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Motherboard ke boto ea potoloho e kholo ho feta 10 sq. cm. 'me e lokela ho lahloa kapa ho khutlisetsoa morao ho latela Directive 2008/98/EC.
Betri ea lithium e lula leboteng la mama. Betri e tlameha ho ntšoa ka thoko ho board ea mama 'me e tla lahloa kapa e hlaphoheloe ho latela Directive 2008/98/EC. Sheba karolo ea 9 bakeng sa litaelo tse tobileng mabapi le ho ntša le ho lahla libeteri tsa LiON.

• Tšoara libeteri tse sebelisitsoeng ka hloko. Se ke oa senya betri ka tsela efe kapa efe; betri e senyehileng e ka lokolla lisebelisoa tse kotsi tikolohong. Se ke oa lahla betri e sebelisitsoeng ka har'a litšila kapa sebakeng sa sechaba sa batho ba qhalaneng. Ka kopo, latela melaoana e behiloeng ke setsi sa lehae sa heno sa taolo ea litšila tse kotsi ho lahla betri ea hau e sebelisitsoeng hantle.
  

Karete ea Katoloso/Karete ea Litšoantšo
Sebaka: Litlhophiso tse ling tsa seva li ka kenyelletsa karete e le 'ngoe kapa tse ngata tsa litšoantšo / GPUs, tsena li hokahane le boardboard ka mokhoa o ikhethileng mme li tlameletsoe ho chassis bakeng sa tšehetso.
Mofuta le palo ea li-fastenings: Li-screws tse tšeletseng (6) tsa Phillips.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa: Tlosa li-screw tsa Phillips. Bula latch e ka morao ea fensetere 'me u tlose karete ea katoloso ka hloko ho slot ea karete ea riser, u e phahamise le hole le sistimi.
Kalafo e Khethehileng / Ts'ebetso e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Ho na le boto e le 'ngoe e hatisitsoeng ea potoloho e kholo ho feta lisekoere-sentimithara tse 10 ka har'a karete e' ngoe le e 'ngoe ea katoloso / karete ea litšoantšo e tlamehang ho tlosoa ka thoko ho sesebelisoa sa polokelo ea data, e lahliloe kapa e fumanoe ho latela Directive 2008/98/EC.

Module oa Phepelo ea Matla
Sebaka: Mojule oa phepelo ea matla o fumaneha hukung e kaholimo ho le letšehali e hokahaneng ka kotloloho ho chassis.
Mofuta le palo ea li-fastenings: Li-screws tse 'nè tsa Phillips.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa oa ho etsa: Ntša thapo ea motlakase phepelong ea motlakase. Sututsa tabo ea tokollo ka morao ho mojule oa phepelo ea motlakase ka lehlakoreng ebe o hula mojule ka kotloloho.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Mojule oa phepelo ea motlakase ke boto ea potoloho e kholo ho feta 10 sq. cm. 'me e lokela ho lahloa kapa ho khutlisoa ho latela Directive 2008/98/EC.

Lehlakoreng la Panel
Sebaka: Ho na le liphanele tse peli tse ka mahlakoreng 'me ho ipapisitsoe le tlhophiso, li ka hokelloa ka ho kena-kenana le tšitiso, kapa likurufu tsa monoana o motona, kapa likurufu tse tloaelehileng.
Mofuta le palo ea li-fastenings: E ka fapana ho tloha ho se seng ho ea ho tse hlano ka kakaretso.
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa: Haeba ho na le li-screw, tlosa li-screw 'me u sebelise khatello e mahareng ebe u thellela morao ka kotloloho ho li tlosa.
Kalafo e Kgethehileng/Tshwaro e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Ha ho letho

Libetri
Sebaka: Betri e ka lebokoseng la li-motherboard, bona setšoantšo se ka tlase.
Mofuta le palo ea li-fastenings: Latch e le 'ngoe (1).
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa: Sutumelletsa ka thōko sehlopha se senyenyaneamp e koahelang lehlakore la betri. Ha betri e lokolloa, e phahamise ka ntle ho sets'oants'o.
Kalafo e Khethehileng / Ts'ebetso e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Betri ea lithium e lula holim'a board ea mama. Betri e tlameha ho ntšoa ka thoko ho board ea mama 'me e tla lahleloa kapa e hlaphoheloe ho latela Directive 2008/98/EC.
Litaelo tsa ho tlosoa bakeng sa betri ea lithium ea motherboard li hlalositsoe ka tlase.

Tšoara libeteri tse sebelisitsoeng ka hloko. Se ke oa senya betri ka tsela efe kapa efe; betri e senyehileng e ka lokolla lisebelisoa tse kotsi tikolohong. Se ke oa lahla betri e sebelisitsoeng ka har'a litšila kapa sebakeng sa sechaba sa batho ba qhalaneng. Ka kopo, latela melaoana e behiloeng ke setsi sa lehae sa heno sa taolo ea litšila tse kotsi ho lahla betri ea hau e sebelisitsoeng hantle.

Sekoaelo sa Chassis Front

Sebaka: Sekoaelo se ka pele sa Chassis se ka pele ho sistimi ea seva. Ho itšetlehile ka tlhophiso, ho ka 'na ha e-ba le likarolo tse peli tsa polasetiki. Sekoahelo se le seng se seholo le likhetho tse nyane tse atolositsoeng tsa drive Bay. Ntle le haeba likhetho tsa drive bay li sebelisoa, ho tla ba le sekoaelo se le seng feela.
Mofuta le palo ea li-fastenings: Li-claspe tsa polasetiki
Lisebelisoa tse hlokahalang: Flat Screwdriver
Mokhoa:

• Mohato oa 1: Tlosa bezel e ka pele ho chassis ka ho e phahamisetsa holimo ho tloha tlase ebe o hula ka pele ho chassis.
• Mohato oa 2: Tlosa sekoahelo se ka pele ho chassis u sebelisa screwdriver e bataletseng ho notlolla lihoko tsa polasetiki.
  Kalafo e Kgethehileng/Tshwaro e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Ha ho letho
  
  

Fans
Sebaka: Li-server tse ngata li na le libapali tse ngata, tlhophiso ena e kenyelletsa balateli ba ka tlase ho 2. Fen e le 'ngoe e fumaneha ka tlase ho phepelo ea motlakase ka morao ho chassis. Ea bobeli e sebakeng sa ho pholisa li-hard drive. Li-fan tse ling li ka eketsoa bakeng sa litlhophiso tse fapaneng. Sheba setšoantšo se bontšitsoeng ka tlase bakeng sa sebaka ka har'a mochine oa mochine.
Mofuta le palo ea li-fastenings: Sehlooho se le seng (1) sa fan ka fan.
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa oa ho etsa: Hakolla mohala oa fene ho tsoa hloohong ea fan board ho motherboard. Ebe u tlosa fan ho tloha tereing ea fan. Kalafo e Khethehileng/Tlhokomelo e Khethehileng Ho latela Annex VII, Directive 2012/19/EU: Likarolo life kapa life tsa polasetiki tse ka har'a fene li tlameha ho tlosoa ka thoko ka lebaka la boteng ba li-flame retardants tsa brominated 'me li tla lahloa kapa li hlakoloe ho latela Directive 2008/98/EC.

Kantle ea Matla a Motlakase
Sebaka: Ho matlafatsa seva ho hlokahala thapo ea motlakase. Cable e ka 'na ea arohanngoa kapa ea hokelloa ka mochini oa rack mount power delivery system. Thapo ea motlakase ea kantle e ka 'na ea e-ba habeli e khaotsoe ka ho tsoa le ho kena ka mofuta o ts'oanang oa plug kapa ntlha e 'ngoe e ka ba mofuta oa plug. Litlhophiso li ka fapana. Haeba sebatli se hlophisitsoe ka botlalo, thapo ea phepelo ea motlakase e tla hokeloa sebakeng sa phepelo ea motlakase se ka morao ho chesi ea mochini. Tlhokomeliso: ho na le lisebelisoa tse peli tsa motlakase ka unit, kahoo ela hloko lithapo tse peli tsa phepelo ea motlakase.
Mofuta le palo ea li-fastenings: Ha ho letho, mokhoa o tobileng oa ho hokahanya khatello.
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa: Tlosa thapo ea motlakase e kantle ho tsoa kopanong e kholo ea seva.
Kalafo e Kgethehileng/Tshwaro e Khethehileng Ho latela Sehlomathiso VII, Directive 2012/19/EU: Lithapo life kapa life tsa kantle tsa motlakase li tlameha ho ntšoa ka thoko 'me li tla lahleloa kapa li fumanoe hape ho latela Directive 2008/98/EC.

Khaolo ea 3 - Litaelo tsa ho kenya, ho hlokomela le ho fetola

Khaolo ena e fana ka litaelo tsa ho kenya le ho nkela likarolo tse kholo tsa sistimi sebaka. Ho thibela mathata a ho lumellana, sebelisa feela likarolo tse lumellanang le litlhaloso le/kapa likarolo tsa linomoro tse fanoeng.

Ho kenya kapa ho fetola likarolo tse ngata ho hloka hore motlakase o tlosoe pele ho sistimi. Ka kopo latela mekhoa e fanoeng karolong ka 'ngoe.

Lintlha tse ling mabapi le likarolo tse ncha / ho fumaneha ha tsona li ka fumanoa Khaolong ea 5 ka tlase.

Ho Tlosa Matla
Sebelisa mokhoa o latelang ho netefatsa hore matla a tlositsoe tsamaisong. Mohato ona oa hlokahala ha ho tlosoa kapa ho kenya lisebelisoa tse sa chesehang kapa ha ho nkeloa sebaka sa phepelo ea motlakase e sa hlokeng letho.

1. Sebelisa sistimi e sebetsang ho theola sistimi.
2. Kamora hore sistimi e koalehe ka botlalo, khaola thapo ea motlakase ea AC mothating oa motlakase kapa phallong.
3. Hakolla lithapo tsa motlakase mojulung (li)mojule oa phepelo ea motlakase.

Ho fihlella Sisteme
Chassis e na le likoahelo tse peli tse ka ntshuwang, tse u lumellang ho fihlella habonolo kahare ho chassis.

Ho tlosa Sekoahelo sa Lehlakore
Qala ka ho tlosa matla ho sistimi joalo ka ha ho hlalositsoe Karolong ea 3.1.

1. Tlosa li-screws tse peli tse sireletsang sekoahelo sa lehlakore le letšehali ho chassis.
2. Tsamaisa sekoahelo se letšehali ho ea ka morao ho chassis.
3. Phahamisa sekoahelo se letšehali ho tloha ka chassis.
4. Tlosa li-screws tse tharo tse sireletsang sekoahelo se ka lehlakoreng le letona ho chassis.
5. Thelelisa sekoaelo se nepahetseng ho ea ka morao ho chassis.
6. Phahamisa sekoahelo se nepahetseng ho tloha ka chassis.

Tlhokomeliso: Ntle le nako e khuts'oane, u se ke ua sebelisa seva ntle le sekoaelo se teng. Sekoahelo sa chassis se tlameha ho ba sebakeng sa ho lumella moea o nepahetseng le ho thibela mocheso o feteletseng.

Likarolo tsa Motherboard
Processor le Heatsink Ho kenya
Motlakase (CPU) le heatsink li lokela ho bokelloa hammoho pele ho theha processor heatsink module (PHM), ebe o kenya PHM ka har'a sokete ea CPU.

Lintlha:

• Matla ohle a tlameha ho tima pele o kenya li-processor.
• Ha u sebetsana le sephutheloana sa processor, qoba ho beha khatello e tobileng sebakeng sa label ea CPU kapa sokete.
• Etsa bonnete ba hore sekoaelo sa lerōle sa polasetiki se teng 'me ha ho le e 'ngoe ea lithakhisa tse kobehileng.
• Litšoantšo tse bukeng ena ke tsa litšoantšo. Likarolo tsa hau li ka shebahala li fapane hanyane.
  

Ho kopanya Sephutheloana sa processor
Hokela processor sekotwana se tšesaane sa processor ho etsa sephutheloana sa processor.

1. K'honeng e kaholimo ea CPU, fumana pin 1 (A), e tšoailoeng ka khutlotharo. Hape, fumana notch B le notch C ho CPU joalo ka ha ho bonts'itsoe ka tlase.
2. Ka holim'a sekotwana sa processor, fumana sekhutlo se tšoailoeng ka khutlo-tharo e sekoti moo e leng teng bakeng sa phini ea 1. Hape fumana notch B le notch C sekotwanang sa processor.
3. Lumellanya pin 1 ea CPU le boemo ba eona bo nepahetseng sekopeng sa processor 'me u kenye CPU ka hloko sekotwana sa processor. Tsamaisa notch ea B ea CPU ho tab ea B ea sekotwana sa processor, 'me u thelle notch ea C ea CPU ho tab ea C ea sekotwana sa processor ho fihlela li-tab tsa sekotwana sa processor li kena ho CPU.
4. Lekola likhutlo tsohle ho netefatsa hore CPU e lutse hantle 'me e sireletsehile sekotwana sa processor.
   

Ho kopanya processor ea Heatsink Module (PHM)
Kamora ho theha kopano ea sephutheloana sa processor, e behe holim'a heatsink ho theha processor heatsink module (PHM).

1. Leiboleng la heatsink, fumana "1" le hukung e haufi le eona. Fetolela heatsink fatše ka lehlakoreng la mafura le shebile holimo, u boloke pina ea "1" sekhutlo.
2. Tlosa filimi e sireletsang ea mocheso haeba e le teng. Haeba ena e le heatsink e ncha, grease e hlokahalang ea mocheso e kile ea sebelisoa fekthering. Haeba heatsink e se ncha, sebelisa tekanyo e nepahetseng ea mafura a futhumetseng.
3. Sekopeng sa processor ea polasetiki, fumana kgutlotharo e sekoti hukung ("a" setšoantšong se ka tlase) haufi le lesoba le likhechana tsa polasetiki. Ho na le lesoba le ts'oanang le likotoana tse ntseng li hola hukung ea diagonal ea sekotwana sa processor ("b" setšoantšong).
4. Ka bokatlase ba heatsink le bokatlase ba sephutheloana sa processor se shebile holimo, hokahanya "1" sekhutlo ho heatsink ("A" setšoantšong) khahlano le likotoana tse ntseng li hola haufi le kgutlotharo e sekoti ("a") ho processor. sephutheloana.
5. Hape hokahanya sekhutlo ("B") ka lehlakoreng le diagonal la heatsink le likotoana tse tsamaisanang le sephutheloana sa processor ("b").
6. Ha e se e hokahantsoe, tobetsa kopano ea sephutheloana sa processor ho heatsink ho fihlela likotoana tse ntseng li hola (ho a, b, c, le d) li kena sebakeng.
   
   

Ho tlosa Sekoahelo sa Lerōle ho CPU Socket
Tlosa sekoaelo sa lerōle ho sokete ea CPU, u pepese lithapo tsa sokete joalo ka ha ho bonts'itsoe ka tlase.
Tlhokomeliso: Se ke oa ama li-socket pins.

Ho kenya processor ea Heatsink Module (PHM)

1. Fumana kgutlotharo (pin 1) ho CPU socket. Hape fumana pinana ea 1 ea PHM e haufi le "1" ho label ea heatsink. Ho netefatsa, sheba bokatlase ba PHM 'me u hlokomele kgutlotharo e sekoti sekotwanang sa processor le kgutlotharo e hatisitsweng ho CPU e haufi le screw e hukung.
2. Lokisetsa pin 1 hukung ea PHM holim'a pin 1 sekhutlong sa CPU socket.
3. Lokisetsa masoba a mabeli likhutlong tse tšekaletseng tsa PHM holim'a lipalo tse peli tsa tataiso holim'a borakete ea sokete 'me u theole PHM ka hloko holim'a sokete.
4. Sebelisa T30 Torx-bit screwdriver ho kenya li-screws tse 'nè ka har'a masoba a ntseng a hola ka soketeng ho hokela PHM ka mokhoa o sireletsehileng holim'a boardboard ka tatellano ea 1, 2, 3, le 4, joalo ka ha ho tšoailoe leiboleng la heatsink. Butle-butle tiisa e 'ngoe le e 'ngoe ho tiisa khatello.

Hlokomela: Sebelisa feela liponto tse 12 tsa torque ha u tiisa lisekere ho qoba ho senya processor kapa sokete.

Memori (Phetoho/Kenyello)
Mofuta le palo ea li-fastenings: Li-latches tse peli (2) ka module ea memori.
Lisebelisoa tse hlokahalang: Ha ho letho.

Mokhoa:

1. Hang ha u se u latetse litaelo tsohle tsa disassembly tlas'a Karolo ea Memory Disassembly (Khaolo ea 2) ka holimo, bula mohopolo o mocha.
2. Etsa bonnete ba hore li-notch tse mahlakoreng ka bobeli li tsamaisana le li-tab tsa tokollo, sebelisa khatello e bobebe 'me u sutumele fatše ho boloka linotlolo tsa memori ho li-tab tsa tokollo (tse hlalositsoeng ka tlase).
   

Lisebelisoa tsa Polokelo ea Lintlha (Ho Fetisa/Ho Kenya)
Mofuta le palo ea li-fastenings: HDD = Latch e le 'ngoe (1) le li-screw tse' nè (6) tsa Phillips, SSD = (1) Phillips screw.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.

Mokhoa:

1. Hang ha u se u latetse litaelo tsohle tsa disassembly tlas'a Data Storage Devices Disassembly (Khaolo ea 2) ka holimo, bula HDD e ncha kapa SSD.
2. Tlosa dummy drive, e tlang e kentsoe pele ho mochini oa koloi, ka ho tlosa li-screws tse bolokang dummy drive ho mojari. Li-screws tsena ha li sebelisoe ho kenya koloi ea sebele.
   
3. Kenya koloi ka har'a sepalangoang lehlakore la PCB le shebile fatše 'me sehokelo se fella ka morao ho sepalangoang. Lokisa koloi ka har'a sesebelisoa e le hore likoti tsa screw li be teng. Hlokomela hore ho na le masoba ka har'a sesebelisoa se tšoailoeng "SATA" ho thusa ho kenya letsoho ka nepo.
4. Sireletsa koloi ho koloi ka li-screws tse 'nè tsa M3 joalokaha ho bontšitsoe ka holimo. Li-screw tsena li kenyelelitsoe ka har'a lebokose la lisebelisoa tsa chassis.
5. Kenya mochine oa koloi ka disk drive ka har'a bay ea eona, ho boloka mochine o lebisitsoe e le hore hard drive e be ka holim'a mochine 'me konopo ea tokollo e ka lehlakoreng le letona.
   Ha mokhanni a fihla ka morao ho kou, molamu oa tokollo o tla hula.
6. Sututsa setshwano ho fihlela se tobetsa sebakeng sa sona se notlelehileng.

Fans (Phetoho/keliso)
Mofuta le palo ea li-fastenings: Sehlooho se le seng (1) sa fan ka fan.
Lisebelisoa tse hlokahalang: Ha ho letho.
Mokhoa:
Rear Exhaust Fan: Kenya lithakhisa tse 'ne tsa rabara ka har'a masoba a mane a pota-potileng sebono sa fan ka morao ho chassis. Hula lithakhisa tsa rabara ka masoba a hloellang a fene ho sireletsa sefene ho chassis. Hokela thapo ea fan ho boto ea seva.
Front Cooling Fan: Kenya lithakhisa tse 'nè tsa rabara ka har'a borakete ea fene e ka pele le ka har'a masoba a kenyang fene e ka pele. Hula lithakhisa tsa rabara ka masoba a ntseng a hola a fene ea sistimi ho boloka fan ho chassis. Theolela fene ka har'a chassis, u tsamaisane le masoba a kaholimo ho bracket ea fan e ka pele le masoba a chassis. Sireletsa fan ho chassis u sebelisa li-screw tse peli tse fanoeng. Hokela thapo ea fan ho boto ea seva.

Phepelo ea Motlakase (Phetoho/Ho Kenya)
Mofuta le palo ea li-fastenings: Li-screws tse 'nè tsa Phillips.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa oa ho etsa: Kenya sebaka sa phepelo ea motlakase e hlolehileng ka mofuta o ts'oanang oa phepelo ea motlakase. Sireletsa phepelo e ncha ea motlakase u sebelisa li-screw tse 'ne tsa Phillips. Hokela thapo ea motlakase ea AC hape mojuleng ebe o matlafatsa sistimi.

Karete ea Katoloso/Karete ea Lits'oants'o (Phetoho/Ho Kenya)
Mofuta le palo ea li-fastenings: Li-screws tse tšeletseng (6) tsa Phillips.
Lisebelisoa tse hlokahalang: Screwdriver e nang le PH2 bit.
Mokhoa: Hang ha u se u latetse taelo eohle ea ho qhaqhoa ka tlas'a Karolo ea Karete ea Katoloso / Karete ea Litšoantšo (Khaolo ea 2) ka holimo, bula Karete e ncha ea Katoloso kapa Karete ea Litšoantšo.
Tlosa li-screw tsa Phillips. Bula latch e ka morao ea fensetere 'me u tlose karete ea katoloso ka hloko ho slot ea karete ea riser, u e phahamise le hole le sistimi.

Khaolo ea 4 - Sehlahisoa sa Take-Back, End-Of-Life Processing, le Lenaneo la E-Waste

Ace Computers e fana ka ts'ebeletso ea naha ka bophara bakeng sa taolo e nepahetseng ea pheletso ea bophelo ea lihlahisoa tse ngolisitsoeng tsa EPEAT le tseo e seng tsa EPEAT tse ngolisitsoeng ka Ace Computers 'me e sebelisana le setsi sa R2 se tiisitsoeng sa ho sebelisoa hape.
Bakeng sa tlhaiso-leseling e eketsehileng le mehato eo u ka e nkang mabapi le Sehlahisoa sa rona sa Take-Back, End-of-Life Processing, le E-Waste Program, ka kopo etela rona. website at https://acecomputers.com/company/sustainability/ tlas'a Tab ea Lenaneo la EPEAT Take-Back/EOL/E-Waste.

Khaolo ea 5 - Litšebeletso tsa Lihlahisoa

Moo U ka Fumanang Likarolo tsa Phetolo / Litšebeletso tsa Sehlahisoa
Haeba o hloka likarolo tse ncha kapa tšebeletso ea sehlahisoa bakeng sa sistimi ea hau, bakeng sa ho inchafatsa kapa bakeng sa sebaka sa sebaka sa marang-rang, ka kopo etela https://acecomputers.com/support/ 'me u tlatse foromo ea kopo ea Ace Computers Support. Haeba thuso ea mohala e hlokahala ka kopo letsetsa Mohala oa rona oa Ts'ehetso 847-952-6999.
Tlhokomeliso: Boholo ba likarolo / lits'ebeletso tsa sehlahisoa li fumaneha bonyane lilemo tse 5 kamora letsatsi la thekiso. Likarolo tse nchafalitsoeng bonyane sekoaelo se latelang: phepelo ea motlakase, li-fan, li-hard drive, memori, CPU, likopano tsa PCB, memori le lisebelisoa tsohle.

Merchandise e Khutlang bakeng sa Tšebeletso
Ha u qeta ho tlatsa Foromo ea Ace Computers Support Request, e bontšitsoeng Karolong ea 1.5, Setho sa Sehlopha sa Ace Computers se tla u thusa ka lipotso tsa hau tsa theknoloji. Haeba ho etsoa qeto ea hore tsela e molemo ka ho fetisisa ke ho lokisoa ha ntlo ho Ace Computers, setsebi sa tšebeletso se tla thusa ho tsamaisa mokhoa oa ho khutlisetsa seva bakeng sa ho lokisoa.

Litokomane / Lisebelisoa

Seva ea Ace Computers PW-GT20 [pdf] Bukana ea Mosebelisi Seva ea PW-GT20, PW-GT20, Seva

Litšupiso

• Bukana ea Mosebelisi