1. Безбедносне информације
Always read and understand all safety warnings and instructions before operating this pneumatic staple gun. Failure to follow these instructions may result in serious injury.
- Носите заштиту за очи: Always wear ANSI-approved safety glasses or goggles when operating the tool.
- Носите заштиту за слух: Prolonged exposure to noise from pneumatic tools can cause hearing damage.
- Одржавајте радни простор чистим: Уверите се да је ваше радно место добро осветљено и без нереда.
- Искључите довод ваздуха: Always disconnect the air supply before making adjustments, clearing jams, or servicing the tool.
- Користите исправан ваздушни притисак: Не прекорачујте максимални препоручени притисак ваздуха за алат.
- Никада не показујте на себе или друге: Treat the tool as if it is always loaded.
- Користите исправне причвршћиваче: Only use staples compatible with this tool.
- Обезбедите радни комад: Always secure the material being stapled to prevent movement.
2. Производ је готовview
The VEVOR MT5016SLN is a 20 gauge pneumatic staple gun designed for fine wire staples, ideal for upholstery, woodworking, and various DIY projects. It features a long nose for precision in tight spaces and an ergonomic design for comfortable, extended use.
Figure 1: VEVOR 20 Gauge Pneumatic Upholstery Staple Gun, general view.
Кључне карактеристике:
- Компатибилност спајалица: Compatible with 50 series fine wire staples, featuring a 1/2-inch (12.8mm) crown size and 1/4" to 5/8" (6mm - 16mm) staple lengths.
- Висок капацитет пуњења: Magazine holds up to 110 staples, reducing the need for frequent reloading.
- Extended Nose Design: Allows for smooth operation in confined or hard-to-reach areas, enhancing precision.
- Sequential Firing Mode: Prevents accidental firings, improving user safety.
- Rear Exhaust Design: Directs exhaust away from the user and workpiece.
- Удобан захват: Equipped with an ergonomic non-slip rubber grip and lightweight build (2.43 lbs / 1.1 kg) to reduce hand fatigue during extended use.
- Издржљива конструкција: Features a high-quality aluminum alloy housing for durability and reliability.
3. Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела ставке | MT5016SLN |
| Staple Gun Type | 20-Гауге |
| Компатибилне спајалице | 50 Series Fine Wire Staples |
| Compatible Crown Size | 1/2 инча (12.6 мм) |
| Compatible Staple Length | 1/4 - 5/8 inch (6mm - 16mm) |
| Капацитет часописа | Max 110 PCS |
| Радни притисак | 70 - 100 PSI |
| Аир Инлет | 1/4" NPT |
| Главни материјал | Алуминијумска легура |
| Нето тежина | 2.43 фунти (1.1 кг) |
| Димензије производа | 8.66 к 7.48 к 1.77 инча (220 к 190 к 45 мм) |
| Додатна опрема укључена | 1x M2.5 Hex Wrench, 1x M3 Hex Wrench, 1x User Manual |
4. Подешавање
4.1 Повезивање са ваздушним компресором
- Уверите се да је компресор за ваздух искључен и да није под притиском.
- Connect a 1/4" NPT air hose to the tool's air inlet.
- Set the air compressor pressure between 70-100 PSI.
- Before first use, or after extended storage, apply a few drops of pneumatic tool oil into the air inlet.
4.2 Убацивање спајалица
- Disconnect the air supply from the tool for safety.
- Press the magazine latch to release the magazine cover.
- Slide the magazine cover open.
- Insert a strip of compatible 50 series fine wire staples into the magazine. Ensure the staple legs are pointing downwards.
- Slide the magazine cover closed until it latches securely.
Figure 8: Visual guide for the 4-step quick staple reload process.
5. Упутство за употребу
5.1 Општи рад
- Ensure the tool is properly connected to an air supply and loaded with staples.
- Position the nose of the stapler firmly against the workpiece. The safety trigger switch will engage when pressed against the surface.
- Press the main trigger to drive a staple. The sequential firing mode ensures one staple is fired per trigger pull.
- Отпустите окидач и подигните алат са предметног обраде.
5.2 Важне напомене о раду
- The tool features a safety mechanism that requires the nose to be pressed against the workpiece for firing. If the tool does not fire, ensure this mechanism is fully engaged.
- Adjust air pressure within the 70-100 PSI range to achieve optimal staple depth for different materials.
- This tool is suitable for applications such as upholstery, woodworking, fabric attaching, light-duty furniture assembly, wooden frame assembly, decorative trim fastening, and picture framing.
Video 1: Demonstration of the VEVOR 21 Gauge Upholstery Stapler, showcasing its features, staple loading, and firing mechanism. Note: The video refers to a 21 gauge model, but the operational principles for loading and firing are similar to the 20 gauge MT5016SLN.
6. Одржавање
Regular maintenance ensures the longevity and optimal performance of your pneumatic staple gun.
- Подмазивање: Apply a few drops of pneumatic tool oil into the air inlet daily or before each use. This lubricates internal components and prevents corrosion.
- Чишћење: Keep the tool clean and free from debris. Wipe down the exterior with a clean cloth.
- Инспекција: Periodically inspect the tool for any signs of wear, damage, or loose fasteners. Tighten any loose screws.
- Складиштење: Store the tool in a dry, clean environment when not in use. Disconnect the air supply before storing.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Алат не пали | Air supply not connected or insufficient pressure; Safety mechanism not engaged; Magazine empty or jammed. | Check air connection and pressure (70-100 PSI); Ensure nose is firmly pressed against workpiece; Reload magazine or clear jam. |
| Спајалице се не убацују у потпуности | Low air pressure; Incorrect staple length for material; Worn driver blade. | Increase air pressure; Use shorter staples or adjust depth; Contact VEVOR support for driver blade replacement. |
| Staples jamming frequently | Incorrect staple type or size; Damaged staples; Debris in magazine or nose. | Use only 50 series fine wire staples (1/2" crown, 1/4"-5/8" length); Inspect staples for damage; Disconnect air, open nose assembly (using hex wrenches), and clear debris. |
| Пропуштање ваздуха | Лабави спојни елементи; Оштећени О-прстенови или заптивке. | Tighten all air fittings; Contact VEVOR support for replacement seals. |
8. Гаранција и подршка
VEVOR products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official VEVOR website. If you encounter any issues or require technical assistance, please contact VEVOR customer support. Ensure you have your model number (MT5016SLN) and purchase details available when contacting support.
Thank you for choosing VEVOR.
