Увод
The YEREADW USB C Meter Voltage Tester is a versatile digital multimeter designed for precise measurement of electrical parameters in USB-C devices. It accurately detects voltage, current, power, capacity, energy, time, current direction, CPU temperature, and D+/D- voltage. This device supports various fast charging protocols, making it an essential tool for optimizing the charging performance of your electronic devices.
Figure 1: YEREADW USB C Meter Voltage Tester. This image shows the compact black device with a short USB-C cable and a color LED display showing various electrical readings.
Сетуп
To begin using your YEREADW USB C Meter Voltage Tester, follow these simple steps:
- Connect the Input: Plug the USB-C male connector of the tester into the power source (e.g., wall charger, power bank, computer USB-C port).
- Повежите излаз: Plug your device (e.g., smartphone, tablet, laptop) into the USB-C female port on the tester.
- Ensure Both Connections: For the tester's screen to illuminate and display readings, both the input (power source) and output (device to be charged/tested) ports must be connected. This is due to PD protocol limitations.
Figure 2: Proper connection methods for the USB-C tester. The image illustrates correct connections with both input and output devices plugged in (indicated by green checkmarks) and incorrect connections where only one side is plugged in (indicated by red crosses), showing that the screen will not light up without both connections.
Упутство за употребу
The YEREADW USB C Meter features a single button for navigation and control. The color LED display provides clear, high-resolution data.
Дисплаи Интерфацес
The tester can display various parameters across multiple screens. These include:
- Волtagе (В)
- струја (А)
- Снага (В)
- Капацитет (мАх)
- Energy (mWh)
- Време (ХХ:ММ:СС)
- Current Direction
- Температура процесора (°C)
- Д+/Д- Волtage
Слика 3: Прamples of the three main display interfaces. The image shows the tester connected to a smartphone, with the screen cycling through different data views, including voltage, current, power, capacity, energy, time, and temperature.
Функције дугмета
- Појединачна штампа: Cycles through the different display screens.
- Дупли клик: Rotates the displayed content for better viewугао уласка.
- Press and Hold (3 seconds): Resets all accumulated capacity, energy, and time data. This is useful before starting a new measurement or testing a new device.
Bidirectional Current Test
The tester supports bidirectional current testing, indicated by arrows on the screen, showing the direction of current flow. This feature is particularly useful for understanding power delivery in complex charging setups.
Figure 4: The tester performing a bidirectional current test. The image shows the tester connected between a charger and two smartphones, illustrating how it can measure current flow in both directions and support various fast charging protocols like PD 2.0/3.0 and QC 2.0/3.0.
Fast Charging Protocol Detection
The device automatically detects and supports a wide range of fast charging protocols, including PD2.0/3.0, QC2.0/3.0, FCP, SCP, AFC, PE, DASH VOOC, and Super VOOC. This ensures accurate measurement across various charging standards.
Testing External Battery Capacity
To accurately test the capacity of an external battery (power bank) using the tester, follow these steps:
- Ensure the external battery is completely discharged before starting the test.
- Connect the USB tester to the external battery.
- Press and hold the button for 3 seconds to reset all capacity and energy data on the tester.
- Connect the external battery to a charger through the tester.
- Keep the external battery charging until it reaches 100%.
- Read the accumulated energy data (Wh) from the tester after the charge is complete.
Formula for Battery Capacity (mAh):
Capacity (mAh) = (Wh / 3.75V) x 1000 x 90%
Note: 3.75V is the default voltage of the battery. The 90% factor accounts for conversion efficiency.
Figure 5: Setup for testing external battery capacity. The image shows the USB-C tester connected between a wall charger and a power bank, demonstrating the process of measuring the power bank's charging capacity.
Одржавање
To ensure the longevity and accurate performance of your YEREADW USB C Meter Voltage Tester, please observe the following maintenance guidelines:
- Чишћење: Обришите уређај меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Складиштење: Тестер чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Руковање: Avoid dropping the device or subjecting it to strong impacts. While designed to be durable, excessive force can damage internal components.
- Влага: Држите уређај даље од воде и високе влажности. Није водоотпоран.
Решавање проблема
If you encounter issues with your YEREADW USB C Meter Voltage Tester, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Screen does not light up. | Only one port (input or output) is connected. | Ensure both the power source and the device to be charged are connected to the tester. |
| Нетачна очитавања. | Loose connection; faulty cable; device incompatibility. | Ensure all connections are secure. Try a different USB-C cable. Test with a different device or power source to isolate the issue. |
| Button unresponsive. | Привремени софтверски квар; физичко оштећење. | Disconnect and reconnect the tester. If the issue persists, contact customer support. |
| No fast charging detection. | Device or charger does not support fast charging; incompatible protocol. | Verify that both your charger and device support the fast charging protocol you expect. The tester will only display what is being negotiated. |
Спецификације
| Параметар | Валуе |
|---|---|
| Бранд | YEREADW |
| Број модела | 066C-CX01 |
| Меасуред Волtagе Распон | 4V - 30V |
| Measured Current Range | 0 - 6.5 А |
| Прецизност мерења | ± (1% + 5) |
| Supported Fast Charge Protocols | PD2.0/3.0, QC2.0/3.0, FCP, SCP, AFC, PE, DASH VOOC, Super VOOC |
| Дисплаи Типе | ЛЕД у боји |
| Димензије производа | 10.01 x 8.99 x 2.21 cm (approx. 56.8mm x 25.8mm for main body, 143.5mm cable length) |
| Тежина производа | 59 грама |
| Боја | Црно |
Слика 6: Детаљно view of the USB-C tester's dimensions and key features. The image highlights the compact size, flexible cable, and robust anti-oxidant input port, emphasizing its portability and durability.
Гаранција и подршка
YEREADW is committed to providing high-quality products and excellent customer service. Your USB C Meter Voltage Tester comes with the following:
- КСНУМКС-месец Гаранција: Enjoy peace of mind with an 18-month warranty covering manufacturing defects.
- Политика поврата у року од 30 дана: If you are not satisfied with your purchase, you may return it within 30 days for a refund or replacement.
- 24-часовна корисничка подршка: For any questions or assistance, our dedicated customer support team is available 24 hours a day.
For support, please visit the official YEREADW website or contact us through your purchase platform.
Figure 7: Visual representation of YEREADW's commitment to customer satisfaction, including warranty, return policy, and customer support availability.
