Vente-unique Massimo Storage Bed 180x200 cm - Instruction Manual

Увод

Thank you for choosing the Vente-unique Massimo Storage Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Безбедносне информације

• Прочитајте сва упутства: Уверите се да разумете све кораке монтаже и безбедносна упозорења пре него што наставите.
• Монтажа за две особе: Assembly of this bed requires at least two adults to prevent injury and ensure proper construction.
• Keep children and pets away: During assembly, keep small children and pets away from the work area to avoid accidents with small parts or tools.
• Use correct tools: Only use the tools specified in the assembly instructions.
• Проверите све везе: Периодично проверавајте све завртње и вијке да бисте били сигурни да су чврсто затегнути. По потреби их поново затегните.
• Ограничење тежине: Do not exceed the maximum recommended weight of 120 kg for this bed.
• Storage mechanism: Exercise caution when opening and closing the storage mechanism. Keep hands and fingers clear of moving parts. Do not allow children to operate the mechanism unsupervised.

Садржај пакета

Пре почетка монтаже, проверите да ли су сви делови наведени у наставку присутни и да ли су неоштећени. Ако неки делови недостају или су оштећени, немојте настављати са монтажом. За помоћ контактирајте корисничку подршку.

• Узглавље (1)
• бочне шине (2)
• Подножје (1)
• Storage Frame/Mechanism (1 set)
• Slats (multiple pieces)
• Централна носећа греда (1)
• Hardware Pack (screws, bolts, washers, Allen key)
• Упутство за монтажу (овај приручник)

Подешавање и монтажа

Please follow these steps carefully. It is recommended to assemble the bed in the room where it will be used.

1. Припремите простор: Ослободите простран простор за монтажу. Поставите све компоненте на меку, чисту површину како бисте спречили огреботине.
2. Причврстите бочне ограде на узглавље кревета: Connect the side rails to the headboard using the provided bolts and washers. Do not fully tighten yet.
3. Причврстите бочне ограде на подножје: Connect the other end of the side rails to the footboard. Ensure all connections are aligned before gently tightening all bolts.
4. Инсталирајте централни носач греде: Place the center support beam into its designated slots or brackets along the side rails. Secure with screws if required.
5. Assemble Storage Mechanism: Follow the specific instructions provided with the storage frame mechanism. This typically involves attaching the lifting arms to the bed frame and the slat frame. Ensure all hydraulic components are correctly installed and secured.
6. Инсталирајте летвице: Place the bed slats onto the support frame. Depending on the design, they may snap into place or require screws. Ensure they are evenly spaced and secure.
7. Завршно затезање: Once all components are in place and aligned, fully tighten all bolts and screws using the provided Allen key or appropriate tool. Do not overtighten.
8. Проверите стабилност: Gently shake the assembled bed to ensure it is stable and all connections are secure.

Operating Instructions (Storage Function)

The Massimo Storage Bed features a convenient lift-up mechanism to access under-bed storage. Always operate the mechanism with care.

1. За отварање:
   • Remove any heavy items from the mattress surface that might impede lifting.
   • Stand at the foot of the bed.
   • Firmly grasp the lifting handle or the edge of the bed frame.
   • Lift the mattress and slat frame upwards. The hydraulic pistons will assist in lifting and holding the bed in the open position.
   • Ensure the bed is fully open and stable before placing or retrieving items from the storage compartment.
2. Затворити:
   • Ensure no items are obstructing the closing mechanism or protruding from the storage area.
   • Grasp the lifting handle or the edge of the bed frame.
   • Gently pull the mattress and slat frame downwards, guiding it back into the closed position. The hydraulic pistons will provide resistance for a controlled descent.
   • Ensure the bed is fully closed and latched (if applicable) before use.

Одржавање

• Чишћење пресвлаке:
  • Редовно усисавајте тапацирунг од тканине користећи меку четку да бисте уклонили прашину и остатке.
  • У случају просипања, одмах обришите чистом, сувом крпом. Не трљајте.
  • For stubborn stains, use a mild fabric cleaner specifically designed for polyester, testing on an inconspicuous area first. Follow the cleaner's instructions carefully.
  • Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the fabric.
• Одржавање оквира:
  • Wipe the bed frame with a soft, damp крпом. Одмах осушите чистом крпом.
  • Periodically check all bolts and screws and tighten them if necessary to maintain stability.
• Механизам складиштења:
  • Inspect the hydraulic pistons and moving parts occasionally for any signs of wear or damage.
  • Do not apply lubricants to the hydraulic pistons unless specifically instructed by the manufacturer.

Решавање проблема

Спецификације

• Модел: Массимо
• Димензије: 180 x 200 cm (King Size)
• Материјал: Polyester fabric upholstery
• Боја: Греи
• Приближна тежина ставке: 119 килограма
• Maximum Recommended Weight: 120 килограма
• Потребна монтажа: Да
• Старосни распон: Адулт

Гаранција и подршка

For warranty information, replacement parts, or technical support, please refer to your purchase documentation or contact Vente-unique customer service. Keep your proof of purchase handy when contacting support.

Vente-unique Customer Service: Visit Vente-unique Contact Page