Franke WD-900

Franke WD-900 Colorline Garbage Disposal Flange Kit Instruction Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Franke WD-900 Colorline Garbage Disposal Flange Kit. Designed to complement Franke Granite sinks, this flange kit offers a seamless and integrated appearance for your kitchen. The Colorline waste kits are crafted with full color throughout and include a special UV additive to prevent fading. They are built to withstand high temperatures, resist scratches and stains, and are food contact safe.

Молимо вас да пажљиво прочитате ово упутство пре инсталације и употребе како бисте осигурали правилно функционисање и дуготрајност вашег производа.

2. Безбедносне информације

Придржавајте се следећих мера безбедности током инсталације и употребе:

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

Franke WD-900 Colorline Garbage Disposal Flange Kit in Matte Black

Image: Franke WD-900 Colorline Garbage Disposal Flange Kit. This image displays the matte black flange and stopper, designed for integration with a garbage disposal unit. The flange features a wide rim and a removable stopper with drainage slots.

4. Подешавање и инсталација

This flange kit is designed to be installed with a compatible garbage disposal unit. The following steps outline a general installation process. Refer to your garbage disposal unit's manual for specific instructions regarding its connection to the flange.

  1. Припрема: Ensure the sink opening is clean and free of debris. Turn off the power to the garbage disposal at the circuit breaker.
  2. Уклоните стару прирубницу (ако је применљиво): If replacing an existing flange, disconnect the garbage disposal from the old flange and remove all old components from the sink opening. Clean any old plumber's putty or sealant.
  3. Нанесите водоинсталатерски кит: Roll a thin rope of plumber's putty and apply it around the underside edge of the new Franke WD-900 flange.
  4. Insert Flange: Insert the flange into the sink drain opening from above, pressing firmly to create a seal with the putty.
  5. Install Mounting Assembly: From underneath the sink, slide the rubber gasket, fiber gasket, and mounting ring onto the flange. Secure these components with the provided screws or bolts, tightening them evenly until the flange is snug and the putty squeezes out from under the rim. Wipe away excess putty.
  6. Connect Garbage Disposal: Attach the garbage disposal unit to the newly installed flange's mounting assembly according to the disposal unit's manufacturer instructions. Ensure all connections are tight and secure.
  7. Тест за цурење: Once installation is complete, fill the sink with water and check for any leaks around the flange and disposal connections. Tighten any leaking connections as needed.
  8. Врати снагу: Turn the electrical power back on at the circuit breaker.

5. Упутство за употребу

The Franke WD-900 Colorline Flange Kit includes a stopper/basket strainer for convenient use:

6. Одржавање и њега

To maintain the appearance and functionality of your Franke WD-900 Colorline Flange Kit:

КСНУМКС. Решавање проблема

If you encounter issues with your Franke WD-900 Colorline Flange Kit, consider the following:

For issues not resolved by these steps, contact Franke customer support or a qualified plumber.

8. Спецификације

ФеатуреДетаљ
Број моделаВД-900
БрандФранке
БојаМат црна
МатеријалМетал и пластика
Пречник4-1/2 инча
Висина2-11/16 инча
Димензије производа4.5 к 4.5 к 2.06 инча
УПЦ612986090823

9. Гаранција и подршка

The Franke WD-900 Colorline Garbage Disposal Flange Kit is covered under Franke's 1 година гаранције. This warranty typically covers manufacturing defects and material flaws under normal use.

For warranty claims, technical assistance, or further support, please contact Franke customer service. Keep your proof of purchase for warranty validation.

Contact information for Franke can typically be found on their official webсајт или паковање производа.