Mesqool CR1024 Projection Alarm Clock User Manual

1. Увод

Thank you for choosing the Mesqool CR1024 Projection Alarm Clock. This device combines a digital alarm clock with a time projector, displaying time on your wall or ceiling. It also features temperature and humidity monitoring, dual alarms, a night light, and USB charging ports. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.

Image 1.1: Mesqool CR1024 Projection Alarm Clock with a smartphone connected for charging.

Кључне карактеристике:

• 180° Swivel Projection with Adjustable Focus
• Large LED Display with Time, Date, Day, Temperature, and Humidity
• Dual Alarms with Weekday/Weekend/7-Day/One-time Modes
• 9-Minute Snooze Function
• Integrated Soft LED Night Light with Adjustable Brightness
• 7-Level Adjustable Alarm Volume
• Dimer sa 5 nivoa
• Memory Function (requires 2x AAA batteries, not included)
• Dual USB Charging Ports (Type-C and USB-A)

2. Подешавање

2.1 Прикључак за напајање

1. Прикључите приложени адаптер за напајање на DC IN порт на задњој страни будилника.
2. Plug the power adapter into a standard electrical outlet. The clock display will illuminate.
3. За резервно напајање током ванредног стањаtages, insert two AAA batteries (not included) into the battery compartment. This will preserve time and alarm settings.

2.2 Почетно подешавање времена и датума

1. Притисните и држите ВРЕМЕНСКИ СКЛОП дугме за улазак у режим подешавања времена.
2. Користите + or - дугмад за подешавање сата. Притисните ВРЕМЕНСКИ СКЛОП потврдити.
3. Repeat the process to set the minute, year, month, and day.
4. Притисните ВРЕМЕНСКИ СКЛОП поново да бисте изашли из режима подешавања.

2.3 12/24 Hour Format and DST

• To switch between 12-hour and 24-hour time formats, press the 12/24Х дугме.
• To activate or deactivate Daylight Saving Time (DST), press the ДСТ button. An indicator will appear on the display when DST is active.

Image 2.1: The clock displaying time in both 12-hour and 24-hour formats.

3. Упутство за употребу

3.1 Подешавање аларма

The clock supports two independent alarms (AL1 and AL2).

1. Притисните и држите АЛ1 or АЛ2 дугме за улазак у режим подешавања аларма.
2. Користите + or - buttons to adjust the alarm hour. Press the respective alarm button (АЛ1 or АЛ2) за потврду.
3. Repeat to set the alarm minute.
4. After setting the minute, use + or - to select the alarm mode: Mon-Sun, Mon-Fri, Sat-Sun, or One-time.
5. Press the alarm button again to confirm and exit.

Image 3.1: The clock displaying dual alarm settings and snooze functionality.

3.2 Функција одлагања

Када се огласи аларм, притисните велико ОДЛОЖИ/У РЕДУ/* button to activate the snooze function. The alarm will pause for 9 minutes and then sound again.

3.3 Alarm Volume Adjustment

Притисните тастер ВОЛ button to cycle through 7 levels of alarm volume. Adjust to your preferred loudness.

Image 3.2: Visual representation of the 4 alarm modes and 7 adjustable volume levels.

3.4 Подешавања пројекције

1. Пројекција ОН/ОФФ: Притисните тастер ПРОЈЕКЦИЈА дугме да бисте укључили или искључили пројекцију.
2. Осветљеност пројекције: Више пута притискајте ПРОЈЕКЦИЈА button to cycle through 5 brightness levels (Dim, Low, Medium, High, Full).
3. Projection Orientation: The projector arm can swivel 180 degrees. Rotate the arm to direct the time display to your desired surface (wall or ceiling).
4. Подешавање фокуса: Use the focus ring on the projector lens to sharpen the projected image.

Слика 3.3: Детаљно view of the projection features, including distance, time flip, rotation, focus, and brightness levels.

3.5 Затамњивач дисплеја

Притисните тастер ДИММЕР button to adjust the brightness of the main LED display. There are 5 levels of brightness to choose from, allowing you to customize it for comfort, especially at night.

Image 3.4: The clock demonstrating its 5-level adjustable display dimmer.

3.6 Ноћно светло

The clock features a soft LED night light located at the bottom. Press the ЛИГХТ button to cycle through Off, Medium, and Full brightness settings for the night light.

Image 3.5: The clock with its integrated night light, showing different brightness options.

3.7 УСБ порта за пуњење

The clock is equipped with a Type-C and a standard USB-A charging port on the back. You can use these ports to charge your mobile devices while the clock is powered.

Image 3.6: The back of the clock showing the Type-C and USB-A charging ports in use.

4. Одржавање

To ensure the longevity and optimal performance of your Mesqool CR1024 Projection Alarm Clock, follow these maintenance guidelines:

• Чишћење: Wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.
• Окружење: Place the clock in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• вентилација: Уверите се да отвори за вентилацију нису блокирани да бисте спречили прегревање.
• Замена батерије: If using AAA batteries for backup, replace them annually or when the low battery indicator appears to ensure settings are retained during power outagес.

КСНУМКС. Решавање проблема

If you encounter issues with your Mesqool CR1024 Projection Alarm Clock, please refer to the following common problems and solutions:

6. Спецификације

Image 6.1: Dimensions of the Mesqool CR1024 Projection Alarm Clock.

7. Гаранција и подршка

7.1 Информације о гаранцији

This Mesqool CR1024 Projection Alarm Clock comes with a 24-месечна гаранција from the date of purchase. Mesqool also provides lifetime support for this product. Please retain your proof of purchase for warranty claims.

7.2 Корисничка подршка

For any questions, technical assistance, or warranty inquiries, please contact Mesqool customer support through the retailer where you purchased the product or refer to the official Mesqool webсајт за контакт информације.