KOORUI KR20Y Single Monitor Desk Mount User Manual

Увод

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Безбедносне информације

Молимо вас да се придржавате следећих мера безбедности како бисте спречили повреде или оштећења:

• Немојте прекорачити максималну носивост од 9 кг (19.8 лбс).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Држите децу и кућне љубимце подаље током инсталације.
• Редовно проверавајте све спојеве и причвршћиваче како бисте били сигурни да су безбедно причвршћени.
• Avoid pinching cables during adjustment to prevent damage.

Садржај пакета

Молимо вас да проверите да ли су све компоненте присутне пре почетка инсталације:

• Склоп ручице монитора
• Ц-Цлamp Монтажни хардвер
• Grommet Mounting Hardware
• ВЕСА плоча
• Monitor Mounting Screws (various sizes)
• Hex Keys / Adjustment Tools
• Клипови за управљање кабловима
• Кориснички приручник (овај документ)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Спецификације

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Подешавање и инсталација

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.

1. Ц-Цлamp Моунт

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Причврстите Ц-цлamp базу до ивице вашег стола.
2. Затегните цлamp screw until the base is securely fastened to the desk. Ensure it is stable and does not wobble.
3. Insert the main pole of the monitor arm into the C-clamp база.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Disassemble the C-clamp components from the base if they are pre-attached.
2. Уметните вијак са ушицама кроз претходно избушену рупу на вашем столу.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. Причвршћивање монитора

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Менаџмент каблова

Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Упутство за употребу

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewинг искуство.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Подешавање висине

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Одржавање одељак).

2. Подешавање нагиба

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. Подешавање окретања

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Слика: Рендгенски снимак view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Одржавање

• Подешавање затегнутости гасне опруге: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• Чишћење: Обришите држач монитора меком,amp крпу. Избегавајте абразивна средства за чишћење или раствараче.
• Периодични преглед: Редовно проверавајте све завртње и спојеве како бисте били сигурни да су чврсто затегнути и безбедно причвршћени.

Решавање проблема

Гаранција и подршка

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.