БРИО 30550 Ролл Рацинг Товер Упутство за употребу

1. Увод

Welcome to the exciting world of the BRIO 30550 Roll Racing Tower! This racing playset is designed for children aged 3 years and up, focusing on speed, gravity, and height. Prepare for high-speed races with tight turns and obstacles, all powered by gravity – no batteries required!

The modular track pieces allow for rebuilding into different track designs, offering flexible and creative play. This manual provides essential information for setting up, operating, and maintaining your Roll Racing Tower.

Кључне карактеристике:

• Two-car racing playset with tight corners and crossing paths.
• Gravity-powered race cars for battery-free play.
• Modular track pieces for customizable track designs.
• Enhances fine motor skills, hand-eye coordination, and dexterity.
• Crafted from high-quality metals, plastics, and textiles to BRIO standards.

2. Шта је у кутији

The BRIO 30550 Roll Racing Tower includes 19 pieces:

• 2x Roll Racers
• 1x Track End
• 2x Left Tracks
• 2x Right Tracks
• 2x Switch Tracks
• 1x Start Ramp
• 1к Основна плоча
• 2x Long Tower Pillars
• 4x Short Tower Connectors
• 1x Goal Portal
• 1x End Ramp

Слика 2.1: Експлодирао view of all 19 components for easy identification during assembly.

3. Подешавање и монтажа

Follow these steps to assemble your BRIO Roll Racing Tower:

1. Unpack all 19 pieces from the box. Refer to Figure 2.1 to identify each component.
2. Begin by placing the Base Plate on a flat, stable surface.
3. Attach the Long Tower Pillars to the designated slots on the Base Plate.
4. Connect the Short Tower Connectors between the Long Tower Pillars to form the multi-level structure.
5. Carefully attach the various track pieces (Left Tracks, Right Tracks, Switch Tracks) to the tower structure, ensuring they snap securely into place.
6. Position the Start Ramp at the highest point of the tower and the Track End and End Ramp на дну.
7. Place the Goal Portal at the finish line.
8. Уверите се да су све везе чврсте пре игре.

Figure 3.1: The product packaging provides an overview of the components and assembly suggestions.

Figure 3.2: The fully assembled BRIO 30550 Roll Racing Tower, ready for play.

4. Упутство за употребу

The BRIO Roll Racing Tower offers engaging play through simple, gravity-driven mechanics:

4.1 Racing the Cars

• Place one or both Roll Racers at the top of the Start Ramp.
• Raise the starting flags to release the cars.
• Watch as gravity propels the cars down the tracks, navigating curves and crossings.
• Observe which car reaches the Goal Portal first or travels the furthest.

Figure 4.1: Roll Racers at the starting gate, ready for the race.

Figure 4.2: Race cars navigating a track section with a crossing point.

4.2 Customizing Track Layouts

• The modular design allows you to reconfigure the track pieces to create new and unique racing experiences.
• Experiment with different arrangements of Left Tracks, Right Tracks, and Switch Tracks to alter the race path.
• Ensure all track connections are secure after making changes.

Слика 4.3: Детаљно view of the Roll Racers and the finish line portal.

Figure 4.4: The low-friction marble on the underside of the Roll Racer ensures smooth, fast movement.

5. Одржавање

To ensure the longevity and optimal performance of your BRIO Roll Racing Tower:

• Чишћење: Обришите све компоненте са огласомamp крпу. Избегавајте јаке хемикалије или абразивна средства за чишћење.
• Складиштење: Store the playset in a dry place away from direct sunlight and extreme temperatures. Disassemble if storing for extended periods to prevent warping or damage.
• инспекција: Periodically check all pieces for any signs of wear or damage. Replace any broken or worn parts immediately to ensure safe play.

КСНУМКС. Решавање проблема

If you encounter any issues with your Roll Racing Tower, consider the following:

• Cars not rolling smoothly: Ensure the tracks are clean and free of debris. Check the low-friction marbles on the underside of the cars for any obstructions.
• Делови шина се не спајају: Verify that you are using the correct pieces for each connection point. Apply gentle pressure to ensure a secure fit.
• Проблеми са стабилношћу: Make sure the Base Plate is on a flat, even surface and all tower pillars and track supports are firmly connected.

7. Спецификације

8. Гаранција и подршка

BRIO products are manufactured to high-quality standards. For specific warranty information or customer support, please refer to the official BRIO webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.