1. Производ је готовview
The oneisall X2 Cat Clipper is designed for efficient and quiet pet grooming, especially for cats with matted or thick hair. It features a low-noise motor, ceramic and titanium blades, and a long-lasting battery for cordless operation.
Image: The oneisall X2 Cat Clipper, a cordless grooming tool.
- Тих рад: Designed with a low-noise motor (less than 50 dB) to minimize pet anxiety during grooming.
- Снажан мотор: Two-speed settings (5500 rpm and 6000 rpm) for effective cutting through various hair types.
- Издржљиве оштрице: Ceramic and titanium blades offer sharpness and longevity, preventing rust and dullness.
- Дуг век трајања батерије: 3-hour charge provides up to 300 minutes of cordless use, with an LCD display for battery status.
- Комплетан комплет за негу: Includes 6 guide combs (3mm, 6mm, 9mm, 12mm, 15mm, 18mm), cleaning brush, maintenance oil, and scissors.
2. Безбедносне информације
- Avoid contact with eyes and face.
- Prevent your pet from ingesting or inhaling small parts.
- Темељно очистите уређај након сваке употребе.
- Овај производ се мора користити под надзором одрасле особе.
- Always handle blades with care to prevent injury.
- Не урањајте машину за шишање у воду.
3. Подешавање и пуњење
Before first use, ensure the clipper is fully charged. The LCD display will indicate the charging status.
- Напуните машину за машење: Connect the clipper to a power source using the provided USB cable. Charge for 3 hours before the first use. The LCD screen will show battery percentage.
- Причврстите оштрицу: Ensure the ceramic and titanium blade is securely screwed onto the clipper.
- Select Guide Comb (Optional): Choose the desired guide comb (3mm, 6mm, 9mm, 12mm, 15mm, or 18mm) and attach it firmly to the blade for specific hair lengths.
Image: The clipper displaying battery charge levels on its LCD screen.
Image: The clipper shown with six different guide combs for varying hair lengths.
4. Упутство за употребу
Follow these steps for effective and safe grooming of your pet.
- Припремите свог љубимца: Ensure your pet is calm and comfortable. Brush their fur to remove loose hair and tangles before clipping.
- Turn On and Select Speed: Press the power button to turn on the clipper. Select the desired speed (5500 rpm or 6000 rpm) using the speed adjustment switch.
- Почните са исецкањем: Guide the clipper smoothly over your pet's fur.
- Trim along the cat's back hair.
- Carefully trim the cat's tail hair.
- Trim the cat's belly hair, being mindful of sensitive areas.
- Trim the hair around the cat's hindquarters.
- Trim the hair on the cat's legs and paws.
- Consider creating a "lion-cut" style if desired, by leaving fur on the head, paws, and tail tip.
- Observe Pet's Reaction: If your pet shows signs of distress, take a break and resume when they are calmer. The low noise design helps reduce anxiety.
- Cordless or Corded Use: The clipper can be used wirelessly after charging or while connected to the power supply.
Image: A cat being groomed with the oneisall X2 clipper, highlighting its quiet operation.
Image: The clipper effectively cutting through matted hair, demonstrating its powerful performance.
Image: Step-by-step guide on grooming different parts of a cat's body with the clipper.
Video: Demonstration of the oneisall X2 Cat Clipper in use, showing its effectiveness on matted hair and quiet operation.
5. Одржавање и чишћење
Proper maintenance ensures the longevity and performance of your clipper.
- Очистите након сваке употребе: Use the provided cleaning brush to remove hair from the blades and inside the clipper head.
- Науљите оштрице: Apply a few drops of the maintenance oil to the blades after cleaning to keep them lubricated and sharp.
- Чувајте правилно: Store the clipper in a dry, safe place away from children and pets.
- Одвојиво сечиво: The ceramic blade is detachable for easy cleaning and replacement.
Image: The detachable ceramic blade, illustrating ease of cleaning and maintenance.
КСНУМКС. Решавање проблема
If you encounter issues with your oneisall X2 Cat Clipper, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Клипер се не укључује | Слаба батерија или није напуњена | Charge the clipper for 3 hours. Check the LCD display for battery level. |
| Clipper pulling hair or cutting poorly | Blades are dull, dirty, or not properly oiled | Clean the blades thoroughly and apply maintenance oil. Ensure blades are securely attached. Consider replacing blades if dull. |
| Прекомерна бука или вибрација | Hair caught in the motor or loose blade | Turn off the clipper and carefully remove any trapped hair. Ensure the blade is securely attached. |
| Clipper not holding a charge | Деградација батерије | Contact customer support for assistance or battery replacement options. |
7. Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | X2 |
| Димензије производа (Д к Ш к В) | 19 к 22 к 6.5 цм |
| Тежина | 600 грама |
| Тип батерије | Lithium-ion (1 AA battery included) |
| Време пуњења | 3 сата |
| Оперативно време | До 300 минута (5 сати) |
| Ниво буке | Мање од 50 дБ |
| Бладе Материал | Metal and Ceramic (Titanium blades) |
| Подешавања брзине | 2 speeds (5500 rpm, 6000 rpm) |
| Посебне карактеристике | Rechargeable, Cordless, Silent Design, LCD Display |
| Цертификати | ФЦЦ, ЦЕ, УКЦА |
Слика: Детаљна view of the clipper with its dimensions and key specifications.
8. Гаранција и подршка
oneisall is committed to providing high-quality products and customer satisfaction.
- гаранција: Овај производ долази са 2-годишњом гаранцијом.
- Служба за кориснике: For any questions, concerns, or support needs, please contact our 24-hour customer service.
- Онлине ресурси: Visit the official oneisall brand store for additional product information and support: oneisall Brand Store.
