VEVOR Electric Hydraulic Car Jack (Model TY-01LEJ) - User Manual

1. Увод

This manual provides comprehensive instructions for the VEVOR Electric Hydraulic Car Jack, Model TY-01LEJ. Please read and understand all safety warnings, instructions, and specifications before operating this product. Retain this manual for future reference.

The VEVOR Electric Hydraulic Car Jack is designed for lifting vehicles up to 5 tons (11000 lbs) for tire changes and minor under-vehicle maintenance. It features a cordless design, remote control operation, and integrated LED lighting for convenience and safety.

2. Безбедносна упутства

УПОЗОРЕЊЕ: Непоштовање ових упутстава може довести до озбиљних повреда или оштећења имовине.

• Always operate the jack on a flat, stable, and level surface.
• Ensure the vehicle is in park (P) and the parking brake is engaged. Block the wheels that are not being lifted.
• Do not exceed the rated load capacity of 5 tons (11000 lbs).
• Position the jack head directly under the vehicle's designated lifting points. Refer to your vehicle's owner's manual for proper lifting points.
• Never work under a vehicle supported only by the jack. Always use appropriate jack stands to support the vehicle after lifting.
• Keep hands, feet, and other body parts clear of the jack and vehicle during lifting and lowering operations.
• Не модификујте дизалицу нити је користите за друге сврхе осим за оне за које је намењена.
• Држите децу и пролазнике даље од радног подручја.
• If the accumulator is unused for an extended period, recharge every 2 months to maintain battery health.
• Ensure the jack is placed vertically with your vehicle.

3. Садржај пакета

Verify that all items are present before initial use.

Figure 3.1: Included components of the VEVOR Electric Hydraulic Car Jack kit.

• 1 x Electric Hydraulic Jack
• 1 x AC110V-240V Adapter/Charger
• 1 x Power Pack (Lithium Battery)
• 1 к даљински управљач
• 1 к пар рукавица
• 1 к кључ
• 1 x Tool Case
• 1 x Power Port Cover
• 1 x Упутство за употребу (овај документ)

4. Спецификације

Figure 4.1: Minimum and maximum lifting heights of the jack.

Figure 4.2: The jack is suitable for vehicles up to 5 tons, including sedans and SUVs.

5. Подешавање

1. Напуните батерију: Before first use, fully charge the lithium battery using the provided AC adapter. Connect the adapter to the jack's charging port and plug it into a standard wall outlet. The charging indicator will show the charging status. A full charge allows for approximately 10 lifts.


Figure 5.1: The jack's cordless power supply, including the 2000mAh lithium battery and AC110V-240V fast charger.

2. Припремите возило: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground to prevent accidental movement.
3. Locate Lifting Point: Consult your vehicle's owner's manual to identify the correct lifting points for the jack. Improper placement can damage the vehicle or cause instability.
4. Поставите Јацк: Place the jack directly under the designated lifting point. Ensure the non-slip saddle on the jack head is centered and securely contacting the vehicle's lifting point. The jack must be placed vertically.


Figure 5.2: Proper placement of the electric hydraulic car jack under a vehicle.

6. Упутство за употребу

6.1 Подизање возила

1. Ensure the jack is correctly positioned and the area is clear of obstructions and personnel.
2. Press the "Up" button on the jack's control panel or the remote control to begin lifting. The jack will extend, raising the vehicle.


Figure 6.1: Operating the jack using the wireless remote control from a distance of over 5 meters.

3. Monitor the lifting process. Stop lifting once the vehicle reaches the desired height, ensuring it is stable. The jack has a maximum lifting height of 17.7 inches (450 mm).
4. Once the vehicle is lifted, immediately place appropriate jack stands under the vehicle's frame at designated support points. Never rely solely on the jack for support.

6.2 Спуштање возила

1. Ensure the work area is clear.
2. Slightly lift the vehicle with the jack to relieve pressure on the jack stands, then carefully remove the jack stands.
3. Press the "Down" button on the jack's control panel or the remote control to slowly lower the vehicle.
4. Once the vehicle is fully lowered and resting on its wheels, remove the jack.

6.3 Коришћење ЛЕД светла

The jack is equipped with an LED light for illumination in low-light conditions. Press the light button on the jack's control panel to turn the LED light on or off. This is useful for emergency tire changes at night.

Figure 6.2: Key features of the jack, including the integrated LED lighting for visibility.

7. Одржавање

• Чишћење: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and moisture.
• Складиштење: Store the jack in its original tool case in a dry, clean, and secure location, away from direct sunlight and extreme temperatures.
• Одржавање батерије: If the battery is not used for an extended period (more than 2 months), recharge it to maintain its capacity and lifespan.
• инспекција: Periodically inspect the jack for any signs of damage, wear, or leaks. Do not use a damaged jack.
• подмазивање: The hydraulic system is sealed and generally does not require user lubrication. If you suspect an issue, contact qualified service personnel.

КСНУМКС. Решавање проблема

9. Гаранција и подршка

For warranty information or technical support, please refer to the warranty card included with your product or visit the official VEVOR website. Please have your model number (TY-01LEJ) and purchase date available when contacting support.

Произвођач: ВЕВОР

Број модела: TY-01LEJ