qingping wdl-1157

Qingping Digital Bluetooth Thermometer Hygrometer User Manual

Бренд: qingping | Модел: wdl-1157

1. Производ је готовview

The Qingping Digital Bluetooth Thermometer Hygrometer is designed to provide accurate, real-time temperature and humidity readings for indoor environments. Featuring an E Ink display for clear visibility from various angles, this compact device offers multiple mounting options and long battery life. It can connect to the Qingping+ app for remote data access and historical data tracking.

Qingping Digital Bluetooth Thermometer Hygrometer with a smartphone displaying the companion app

Figure 1: Qingping Thermometer Hygrometer and its companion app interface.

2. Подешавање

2.1. Инсталација батерије

The device uses one CR2430 Lithium Metal button cell battery, which is included. To install or replace the battery:

  1. Пронађите поклопац одељка за батерију на задњој страни уређаја.
  2. Twist the cover counter-clockwise to open it.
  3. Уметните батерију CR2430 са позитивном (+) страном окренутом нагоре.
  4. Replace the cover and twist clockwise to secure it.
Цлосе-уп view of the back of the Qingping thermometer showing the CR2430 battery compartment

Figure 2: Battery compartment showing the CR2430 battery.

2.2. Опције монтаже

The Qingping Thermometer Hygrometer offers versatile placement options:

  • Положај на радној површини: Open the back cover to an angle of 90 degrees to the body. This allows the device to stand upright on a flat surface.
  • Монтажа на зид: Use the supplied wall sticker. Attach the sticker to a clean, dry wall surface, then attach the monitor to the sticker. The monitor has built-in magnets, and the wall sticker contains an iron plate for secure attachment.
  • Магнетни додатак: The device has built-in magnets, allowing it to be directly attached to iron surfaces, such as a refrigerator door.
Two images showing the Qingping thermometer in desktop mode with its kickstand and wall mode attached to a wall

Figure 3: Desktop and Wall mounting configurations.

3. Упутство за употребу

3.1. E Ink Display

The E Ink display provides clear, paper-like readings of temperature and humidity. It offers ultra-wide viewing angles and high contrast for easy readability from various positions in a room.

Diagram illustrating the ultra-wide viewing angle and ultra-high contrast of the E-ink display on the Qingping thermometer

Figure 4: Features of the E Ink display.

3.2. Промена јединица температуре

To switch between Fahrenheit (°F) and Celsius (°C), press the button located on the back of the product.

3.3. App Connection and Remote Monitoring (Qingping+ App)

To access temperature and humidity data remotely, download the Qingping+ app from the Google Play Store or Apple App Store. A Qingping Bluetooth Gateway (sold separately) is required for remote access functionality.

Qingping thermometer on a table with a smartphone displaying the Qingping+ app interface for remote monitoring

Figure 5: Remote monitoring via the Qingping+ app.

3.4. Historical Data Recording

The device tracks and saves data for up to 30 days. This historical data can be viewed as graphical statistics within the Qingping+ app and can also be exported in CSV format if needed.

A hand holding a smartphone displaying historical temperature and humidity data in the Qingping+ app

Figure 6: Historical data viewable in the Qingping+ app.

4. Одржавање

4.1. Трајање батерије и замена

The device features low power consumption, providing approximately 10 months of battery life in normal indoor environments. When the battery is low, a battery icon will appear on the display. Refer to Section 2.1 for battery replacement instructions.

4.2. Нега и чишћење

To ensure accurate readings and prolong the device's lifespan:

  • Обришите уређај меком, сувом крпом. Не користите абразивна средства за чишћење нити потапајте уређај у воду.
  • Avoid placing the product in environments with humidity consistently higher than 90% for long-term use, as this may affect performance.
  • Немојте блокирати отвор за вентилацију на дну производа.

КСНУМКС. Решавање проблема

  • Нетачна очитавања:
    • Ensure the device is placed in a stable environment, away from direct sunlight, drafts, or heat sources.
    • Allow approximately 15 minutes for the readings to stabilize after initial setup or significant environmental changes.
    • Verify the vent hole on the bottom of the product is not blocked.
  • Display Issues (e.g., "188" displayed):
    • This indicates a factory reset or an error. Press and hold the button on the back of the product until the screen displays "188", then release. Wait for the product to return to correct temperature and humidity readings.
  • No Data in App / Connection Issues:
    • Уверите се да је Bluetooth омогућен на вашем паметном телефону и да је уређај у домету.
    • For remote access, confirm that a Qingping Bluetooth Gateway is properly set up and connected.
    • Check the battery level of the device.
    • Restart the Qingping+ app and/or your smartphone.

6. Спецификације

ФеатуреДетаљ
Број моделаwdl-1157
Димензије2.91 к 0.63 к 2.91 инча
Тежина3.53 унци
Температурни опсег32 ~ 122°Ф (0 ~ 50°Ц)
влажност Опсег0% ~ 99.9%RH (under no condensation circumstances)
Прецизност температуре0.1°
Тип батерије1 x CR2430 литијум-метал (укључена)
Трајање батеријеApprox. 10 months (in normal indoor environments)
ПовезивањеБлуетоотх ниске енергије
Складиштење податакаUp to 30 days (viewable in Qingping+ app)
Close-up of the side of the Qingping thermometer showing the high accuracy Sensirion sensor

Figure 7: High accuracy sensor from Sensirion.

7. Гаранција и подршка

For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Qingping webсајту. Сачувајте рачун о куповини за гаранције.

For further assistance, you may also contact Qingping customer service through their official channels.

Повезани документи - wdl-1157

Преview Qingping Temp & RH Monitor T Version CGG1T User Manual
Comprehensive user manual for the Qingping Temp & RH Monitor T Version (Model CGG1T), detailing specifications, setup instructions for desktop and wall modes, connectivity with Apple HomeKit and Qingping+ app, troubleshooting, warranty, and FCC compliance. Includes safety warnings and hazardous substance information.
Преview Qingping Temp & RH Monitor H Version FAQ and Troubleshooting Guide
Find solutions to common issues with the Qingping Temp & RH Monitor H Version, including data display, connectivity, and responsiveness. Learn how to update firmware and reset the device.
Преview Qingping Air Monitor Lite User Manual | Setup, Specifications & Troubleshooting
Comprehensive user manual for the Qingping Air Monitor Lite (CGDN1). Learn how to set up, connect to HomeKit, Mi Home, and Qingping+ apps, view specifications, and troubleshoot common issues.
Преview Qingping CGP22C CO2 & Temp & RH Monitor User Manual
User manual for the Qingping CGP22C CO2, Temperature, and Humidity Monitor, providing setup, operation, troubleshooting, and specifications. Learn how to power on/off, charge, connect to the Qingping IoT app, and understand device features.
Преview Qingping CO2 & Temp & RH Monitor (CGP22C) User Manual
User manual for the Qingping CO2 & Temp & RH Monitor (CGP22C), detailing power on/off, charging, app connection, sensor specifications, troubleshooting, and warranty information.
Преview Qingping Air Monitor CGS1 User Manual and Specifications
Comprehensive user manual for the Qingping Air Monitor CGS1, covering setup, operation, sensor initialization, connectivity, troubleshooting, specifications, and warranty information.