Güde GSBSM 450 Упутство за употребу брусилице са вретеном и траком

1. Производ је готовview

The Güde GSBSM 450 Spindle-Belt Sander is a versatile 2-in-1 woodworking tool designed for precise sanding tasks on both internal and external surfaces. It combines the functionality of a spindle sander and a belt sander in a single compact unit, making it suitable for a wide range of applications.

Кључне карактеристике укључују:

• Двострука функционалност: Seamlessly switches between spindle and belt sanding modes for diverse project requirements.
• Oscillating Action: Ensures uniform sanding results and reduces heat buildup, extending abrasive life and preventing material damage.
• Tool-Free Conversion: Quick and easy changes between sanding methods without the need for additional tools.
• Adjustable Work Table: The work table can be tilted up to 45 degrees, accommodating various sanding angles and workpiece shapes.
• Интегрисано усисавање прашине: Features a connection for a dust extractor to maintain a clean working environment.

2. Безбедносна упутства

Увек прочитајте и разумејте сва безбедносна упозорења и упутства пре руковања овим електричним алатом. Непоштовање упозорења и упутстава може довести до струјног удара, пожара и/или озбиљних повреда.

Општа безбедност електричних алата

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Неред или тамна места могу изазвати несреће. Немојте користити електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Утикачи електричних алата морају одговарати утичници. Никада не модификујте утикач на било који начин. Избегавајте контакт тела са уземљеним површинама.
• Лична безбедност: Увек носите заштиту за очи. Користите заштиту за уши када радите са бучним алатима. Обуците се прикладно; избегавајте широку одећу или накит. Осигурајте дугу косу.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.
• Контрола прашине: Connect dust extraction and collection facilities if provided. Ensure proper ventilation.

Specific Sander Safety

• Уверите се да је радни предмет безбедно цлamped or held before sanding.
• Never sand materials containing nails, screws, or other foreign objects.
• Do not wear gloves when operating the sander, as they can get caught in moving parts.
• Regularly check sanding belts and sleeves for wear or damage and replace as necessary.

3. Product Components and Included Accessories

The Güde GSBSM 450 comes with a comprehensive set of accessories to facilitate various sanding tasks. Familiarize yourself with all components before use.

• Spindle-Belt Sander Unit
• 1x Belt Sanding Attachment
• 1к Вренцх
• 1x Sanding Belt (K80 grit)
• 5x Adapter Rolls (2", 1-1/2", 1", 3/4", 1/2" with K80 sanding sleeves)
• 5x Table Inserts (13, 19, 26, 38, 51 mm)

4. Подешавање и монтажа

Before operating the sander, ensure it is properly set up and all components are securely in place.

4.1 Почетно смештање

• Place the sander on a stable, level workbench.
• Ensure adequate clearance around the machine for safe operation and workpiece handling.

4.2 Прикључак за напајање

• Connect the power cord to a suitable 230 Volt AC outlet.
• Ensure the power switch is in the 'OFF' position before plugging in the machine.

4.3 Усисавање прашине

• Attach a dust extraction system to the integrated dust port for efficient dust collection. This helps maintain a clean workspace and improves visibility.

4.4 Changing Between Spindle and Belt Sanding Modes

The GSBSM 450 allows for quick, tool-free conversion between modes.

4.4.1 Spindle Sanding Setup

• Remove the belt sanding attachment if it is installed.
• Select the appropriate adapter roll and sanding sleeve for your task.
• Slide the chosen adapter roll onto the spindle shaft.
• Place the corresponding table insert into the work table opening.

4.4.2 Belt Sanding Setup

• Remove any installed spindle adapter roll and table insert.
• Attach the belt sanding attachment to the designated mounting points.
• Ensure the sanding belt is correctly tensioned and aligned on the rollers.

4.5 Work Table Adjustment

• The work table can be tilted from 0 to 45 degrees. Loosen the table locking knob, adjust to the desired angle, and then securely tighten the knob.

5. Упутство за употребу

Follow these guidelines for safe and effective operation of your Güde GSBSM 450 Spindle-Belt Sander.

5.1 Укључивање/искључивање

• To turn on the sander, press the green 'ON' button.
• To turn off the sander, press the red 'OFF' button.

5.2 Технике брушења

5.2.1 Spindle Sanding

• Use spindle sanding for intricate curves, internal contours, and small workpieces.
• Move the workpiece smoothly against the oscillating sanding sleeve. Avoid applying excessive pressure, which can lead to burning or uneven sanding.
• Rotate the workpiece to utilize the entire surface of the sanding sleeve, ensuring even wear.

5.2.2 Брушење траком

• Utilize belt sanding for straight edges, larger surfaces, and external curves.
• Feed the workpiece steadily into the sanding belt. Maintain consistent pressure.
• Ensure the workpiece is fully supported by the work table.

5.3 Material Considerations

• Always perform a test sand on a scrap piece of the same material to determine the appropriate pressure and technique.
• Different wood types and materials may require different grit sizes and sanding approaches.

6. Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе ваше брусилице.

6.1 Чишћење

• After each use, disconnect the power and clean the machine.
• Use a brush or compressed air to remove dust and debris from the motor vents, work table, and sanding areas.
• Не користите раствараче или јаке хемикалије, јер могу оштетити пластичне делове.

6.2 Replacing Sanding Belts and Sleeves

• Worn or dull sanding abrasives should be replaced promptly to ensure efficient sanding and prevent damage to the workpiece or machine.
• Follow the instructions in Section 4.4 for changing between spindle and belt sanding modes, which includes the steps for replacing the respective abrasives.

6.3 Општи преглед

• Periodically check all fasteners and screws for tightness.
• Inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified technician.
• Уверите се да сви покретни делови раде глатко.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your Güde GSBSM 450.

8. Техничке спецификације

9. Подршка и услуга

Güde is committed to providing excellent customer support and service for all its products.

9.1 Доступност резервних делова

Güde maintains a comprehensive stock of spare parts for all products, including older models, available through their service center. This ensures the long-term usability and repairability of your device.

9.2 Техничка помоћ

Should you encounter any issues with your Güde device, trained specialist staff at the internal service center are available to provide telephone support and guidance.

9.3 Сервис поправке

For problems that cannot be resolved remotely, Güde offers an internal repair service to provide professional assistance and repair for your device.

For further assistance, please refer to the contact information provided with your product packaging or visit the official Güde webсајту.