Увод
This manual provides essential information for the safe and effective use of your DEWALT DWS715 12-Inch Single Bevel Compound Miter Saw. Please read and understand all instructions before operating the tool. The DWS715 is powered by a 15 Amp motor, delivering 4,000 RPM for extended power and durability. It features a stainless-steel miter detent plate and cam miter lock for repeatable accuracy and easy adjustments. Tall sliding fences support 5-1/2-inch base molding vertically and 5-1/2-inch crown molding vertically nested. Its lightweight design and built-in carry handle enhance portability.
Опште информације о безбедности
WARNING: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask, when operating power tools. Read and understand all safety warnings and instructions provided with the product.
- Одржавајте радни простор чистим и добро осветљеним. Претрпане или мрачне области изазивају несреће.
- Не користите електричне алате у експлозивној атмосфери, као што је присуство запаљивих течности, гасова или прашине. Електрични алати стварају варнице које могу запалити прашину или испарења.
- Држите подаље децу и особе у близини док користите електрични алат. Ометања могу узроковати да изгубите контролу.
- Избегавајте случајно покретање. Уверите се да је прекидач у искљученом положају пре укључивања.
- Не претерујте. Увек држите правилан положај и равнотежу. Ово омогућава бољу контролу електричног алата у неочекиваним ситуацијама.
- Користите цлampс или неки други практичан начин да се радни предмет причврсти на стабилну платформу. Држање посла руком или уз тело је нестабилно и може довести до губитка контроле.
Included Components & Key Features
The DEWALT DWS715 Miter Saw comes with the following components:
- DWS715 Single Bevel Compound Miter Saw
- 12" Carbide Tipped Blade
- Вренцх
- Торба за прашину
- Вертицал Цлamp
Image: DEWALT DWS715 Miter Saw with key components labeled, including the arbor, dust bag, headlock pin, 14 positive stops, and sturdy design.
Image: The DEWALT DWS715 Miter Saw shown with its included 12-inch carbide-tipped blade, wrench, dust bag, and vertical clamp.
Сетуп
1. Распакивање и преглед
Carefully remove the saw and all accessories from the packaging. Inspect for any damage that may have occurred during shipping. Ensure all listed components are present.
2. Mounting the Saw
For stable operation, the miter saw should be securely mounted to a workbench or a compatible miter saw stand. Use the mounting holes provided in the base of the saw to fasten it with appropriate hardware.
3. Уградња/замена сечива
- Уверите се да је тестера искључена из извора напајања.
- Притисните дугме за закључавање вретена да бисте спречили окретање сечива.
- Using the provided wrench, loosen the arbor bolt by turning it clockwise (note: this is a reverse thread).
- Remove the outer washer and the old blade.
- Install the new 12-inch carbide-tipped blade, ensuring the teeth are pointing downwards towards the table.
- Replace the outer washer and tighten the arbor bolt by turning it counter-clockwise. Do not overtighten.
4. Dust Bag/Collection Setup
Attach the included dust bag to the dust port at the rear of the saw. For improved dust collection, connect a shop vacuum to the dust port.
5. Adjusting Fences and Detents
The tall sliding fences can be adjusted to support various material sizes. The stainless-steel miter detent plate features 14 positive stops for common miter angles, allowing for quick and accurate adjustments. Use the cam miter lock for securing angles.
Операција
1. Укључивање/искључивање
Plug the saw into a standard 120V power outlet. To start the saw, depress the trigger switch located on the handle. Release the trigger to turn off the saw.
2. Making Miter Cuts
Да бисте подесили угао нагиба:
- Отпустите ручку за закључавање угла.
- Rotate the turntable to the desired angle, aligning the indicator with one of the 14 positive stops or a custom angle.
- Tighten the miter lock handle to secure the position.
Place the workpiece firmly against the fence and table. Lower the blade slowly through the material, maintaining a steady pace.
3. Прављење косих резова
The DWS715 allows for single bevel cuts from 0° to 48° to the left and 0° to 3° to the right. To adjust the bevel angle:
- Отпустите дугме за закључавање косине.
- Нагните главу тестере до жељеног угла.
- Затегните дугме за закључавање косог сечења да бисте осигурали положај.
Image: The DEWALT DWS715 Miter Saw illustrating its ability to bevel from 0-48 degrees to the left and 0-3 degrees to the right.
4. Using the Vertical Clamp
The included vertical clamp can be used to secure workpieces to the saw table, preventing movement during cuts and enhancing precision. Position the clamp to hold the material firmly without obstructing the blade path.
Image: The DEWALT DWS715 Miter Saw demonstrating the use of its vertical clamp to secure a workpiece for precise cutting.
5. Headlock Pin
The headlock pin allows for simple adjustments and secures the saw head in a lowered position for transport or storage.
Image: Close-up of the DEWALT DWS715 Miter Saw's headlock pin, used for simple adjustments and securing the saw head.
Одржавање
Редовно одржавање осигурава дуготрајност и оптималне перформансе ваше угаоне тестере.
1. Чишћење
After each use, unplug the saw and clean off sawdust and debris from the motor housing, blade guard, and table. Use a brush or compressed air. Periodically empty the dust bag or clean the dust collection hose.
2. Преглед и замена сечива
Regularly inspect the blade for sharpness, damage, or missing teeth. A dull or damaged blade can cause kickback and poor cut quality. Replace the blade as described in the Setup section when necessary.
3. Општа инспекција
Check all screws, nuts, and bolts for tightness. Ensure all moving parts operate smoothly. Lubricate pivot points as recommended in the full product manual (not provided here).
Решавање проблема
- Тестера се не покреће: Check if the saw is properly plugged into a live outlet. Ensure the trigger switch is fully depressed. Verify there is no power outage.
- Poor cut quality (rough cuts, burning): The blade may be dull or damaged. Replace the blade. Ensure the correct blade type is used for the material. Check that the workpiece is securely clampед.
- Прекомерне вибрације: Ensure the saw is securely mounted. Check the blade for damage or improper installation.
- Dust collection is inefficient: Empty the dust bag or clear any blockages in the dust port/hose. Ensure the dust bag is properly attached.
For more detailed troubleshooting, refer to the complete DEWALT DWS715 user manual or contact DEWALT customer support.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | ДВС715 |
| Извор напајања | Цордед Елецтриц |
| Ampераге | 15 Amps |
| Брзина без оптерећења | 4000 РПМ |
| Бладе Диаметер | 12 инча |
| Miter Detent Stops | 14 позитивних заустављања |
| Бевел Цапацити | 0°-48° Left, 0°-3° Right |
| Vertical Base Molding Capacity | 5-1/2 инча |
| Vertical Crown Molding Capacity (Nested) | 5-1/2 инча |
| Cross Cut Capacity (90°) | 2x8 инча |
| Cross Cut Capacity (45°) | 2x6 инча |
| Тежина артикла | 42.8 фунти |
| Димензије производа | 26.77 cm D x 21.85 cm Š x 18.9 cm V |
Гаранција и подршка
Информације о гаранцији
The DEWALT DWS715 Miter Saw comes with a limited warranty. Please refer to the official DEWALT warranty documentation included with your product for specific terms, conditions, and duration. Typically, DEWALT offers a 3-year limited warranty, 1-year free service, and 90-day money-back guarantee.
Корисничка подршка
За техничку помоћ, сервис или да бисте пронашли сервисни центар, посетите званичну DEWALT веб страницу website or contact their customer service department. Keep your purchase receipt and product model number (DWS715) handy when contacting support.