Subzero SZ-7569T Touch Sensitive Temperature Controller User Manual

1. Увод

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of the Subzero SZ-7569T Touch Sensitive Temperature Controller. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.

2. Производ је готовview

The Subzero SZ-7569T is a precise, touch-sensitive temperature controller designed for various industrial and scientific applications. It features a clear digital display and intuitive touch controls for easy temperature management.

Figure 1: Subzero SZ-7569T Front Panel
The image displays the front panel of the Subzero SZ-7569T temperature controller. It features a black casing with a bright red digital LED display showing '28°C'. To the left, the 'sub-zero' brand name is visible. On the right, there are touch-sensitive buttons for 'Up' (arrow), 'Power' (circle with line), 'PRG' (program) with a 'Down' arrow, and 'SET' (set). A snowflake icon is also visible next to the temperature reading, indicating a cooling function.

3. Спецификације

4. Инсталација

Proper installation is crucial for the accurate and safe operation of the temperature controller. It is recommended that installation be performed by a qualified technician.

1. Искључивање струје: Ensure all power to the installation area is disconnected before beginning any wiring.
2. Монтажа: Mount the controller in a secure, dry location away from direct heat sources, excessive vibration, or corrosive environments. Ensure adequate ventilation.
3. Ожичење: Connect the power supply, temperature sensor, and controlled device (e.g., heater, cooler) to the appropriate terminals on the controller. Refer to the wiring diagram provided with the product packaging for specific connections. Ensure all connections are secure and correctly polarized.
4. Положај сензора: Position the temperature sensor in the area where temperature control is required, ensuring it accurately reflects the desired measurement point and is not influenced by external factors.
5. Прикључак за напајање: Once all wiring is complete and verified, restore power to the system.

Warning: Incorrect wiring can lead to device malfunction, damage, or electrical hazards. Always consult the detailed wiring diagram.

5. Почетно подешавање

After installation, perform the following steps for initial setup:

1. Укључено: Притисните тастер ⏻ (Power) button to turn on the device. The display will illuminate.
2. Check Sensor Reading: Verify that the display shows a plausible temperature reading. If an error code appears, refer to the Troubleshooting section.
3. Подешавања приступа: Притисните тастер СЕТ button to enter the temperature setting mode.
4. Adjust Setpoint: Користите ⌃ (Горе и ⌄ (Down) buttons to adjust the desired temperature setpoint.
5. Confirm Setpoint: Притисните СЕТ again to confirm the new setpoint and exit the setting mode.
6. Program Mode (PRG): For advanced settings such as hysteresis, calibration, or alarm limits, press the ПРГ button. Navigate through parameters using the Up/Down arrows and confirm changes with СЕТ. Consult the full programming guide for detailed parameter descriptions.

6. Операција

The Subzero SZ-7569T operates automatically once the setpoint and parameters are configured. The display shows the current measured temperature.

• Приказ температуре: The large digital display continuously shows the current temperature measured by the sensor.
• Cooling/Heating Indicator: A snowflake icon (❅) or similar indicator will illuminate when the cooling or heating output is active, depending on the configured mode.
• Adjusting Setpoint During Operation: Кратко притисните СЕТ, а затим користите ⌃ (Горе) или ⌄ (Down) to change the setpoint. Press СЕТ опет да уштедим.
• Укључивање/искључивање: Притисните и држите ⏻ (Power) button for a few seconds to turn the device off or on.

7. Одржавање

Regular maintenance ensures the longevity and accuracy of your Subzero SZ-7569T temperature controller.

• Чишћење: Обришите екран и цasinг са меким, дamp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the touch panel or internal components.
• Инспекција сензора: Periodically check the temperature sensor for any signs of damage or corrosion. Ensure it is securely in place.
• Везе: Occasionally inspect wiring connections to ensure they remain tight and free from corrosion.
• Провера калибрације: If accuracy is critical, periodically verify the controller's readings against a calibrated reference thermometer. Recalibrate if necessary, following the instructions in the programming guide.

Caution: Always disconnect power before performing any maintenance that involves opening the device or accessing internal wiring.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with the Subzero SZ-7569T.

Ако наиђете на проблем који није овде наведен или ако предложена решења не реше проблем, обратите се корисничкој подршци.

9. Гаранција и подршка

The Subzero SZ-7569T Touch Sensitive Temperature Controller is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period.

For technical support, service, or warranty claims, please contact PVR Control customer service. Ensure you have your product model number (SZ-7569T) and purchase details available when contacting support.

Произвођач: PVR Control
Модел: SZ-7569T