Surker HC-7098 Waterproof Rechargeable Hair Clipper User Manual

Увод

This manual provides essential instructions for the safe and effective use of your Surker HC-7098 Waterproof Rechargeable Hair Clipper. Please read this manual thoroughly before first use and retain it for future reference.

Важна безбедносна упутства

• Do not immerse the appliance in water while it is connected to the charging adapter.
• Држите уређај ван домашаја деце.
• Use only the charging adapter supplied with this product.
• Искључите уређај из електричне утичнице пре чишћења или било каквог одржавања.
• Do not use the appliance if the blades are damaged or broken, as this may cause injury.
• Avoid using the appliance in extremely hot or cold environments.
• Ако је кабл за пуњење оштећен, мора га заменити произвођач, његов сервисни агент или слично квалификована особа како би се избегла опасност.

Производ је завршенview и компоненте

The Surker HC-7098 is a waterproof, rechargeable hair clipper designed for efficient hair and beard trimming. Its adjustable length settings and stainless steel blade ensure precise results.

Садржај пакета:

• 1 x Surker HC-7098 Hair Clipper
• 1 x Charging Adapter Cable
• 2 x Limit Combs (for various length settings)
• 1 к четка за чишћење
• 1 x чешаљ
• 1 x Упутство за употребу на енглеском језику (овај документ)

Image: Surker HC-7098 hair clipper on its charging stand, covered in water droplets, highlighting its waterproof design.

Слика: Фронт view of the Surker HC-7098 hair clipper, showing the power button and 'SURKER' branding.

Слика: Са стране view of the Surker HC-7098 hair clipper with an adjustable limit comb attached, demonstrating the length setting mechanism.

Сетуп

Прво пуњење:

1. Before first use, fully charge the hair clipper.
2. Connect the charging adapter cable to the clipper and plug it into a suitable power outlet (220V).
3. The charging indicator light will illuminate. Allow sufficient time for a full charge as indicated by the device (refer to charging section for details).

Причвршћивање граничних чешљева:

• Ensure the clipper is turned off before attaching or detaching any accessories.
• Align the desired limit comb with the clipper head and gently push it until it clicks into place.
• To remove, gently pull the comb away from the clipper head.

Упутство за употребу

Пуњење клипера:

Connect the charging adapter to the clipper and a power source. The charging indicator will show the charging status. A full charge typically takes several hours. Do not operate the clipper while it is charging.

Укључивање/искључивање:

Press the power button located on the front of the clipper to turn it on. Press the button again to turn it off.

Adjusting Hair Length:

The Surker HC-7098 offers 10 adjustable length settings using the two included limit combs. These settings allow for precise trimming from 4mm to 30mm.

To select a length, attach the appropriate limit comb and adjust the setting on the comb or clipper body (depending on the comb design) to your desired length. Always start with a longer setting if you are unsure.

Trimming Hair/Beard:

1. Уверите се да је коса чиста и сува за најбоље резултате.
2. Select the desired cutting length using the limit comb.
3. Turn on the clipper.
4. Hold the clipper with the blades pointing upwards and move it against the direction of hair growth.
5. Користите глатке, равномерне потезе.
6. For detailing or outlining, remove the limit comb and use the bare blade carefully.

Одржавање

Чишћење:

The Surker HC-7098 is waterproof, allowing for easy cleaning.

1. Turn off the clipper and disconnect it from the charging adapter.
2. Remove the limit comb.
3. Use the provided cleaning brush to remove loose hairs from the blades and clipper body.
4. Rinse the clipper head and blades under running water. Ensure the charging port is covered or dry before charging again.
5. Оставите машину за шишање да се потпуно осуши на ваздуху пре складиштења или пуњења.

Складиштење:

Store the clipper in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage to maintain battery health.

Решавање проблема

• Машинка за шишање се не укључује: Ensure the clipper is charged. Connect it to the charger and check if the charging indicator lights up.
• Лоше перформансе сечења: Clean the blades thoroughly. Ensure no hair is stuck. The blades may need oiling (if applicable, though not specified for this model, it's a common clipper maintenance step). Ensure the battery is sufficiently charged.
• Машинка за шишање се не пуни: Check the charging adapter and cable for damage. Ensure the power outlet is functional.

Ако проблеми и даље постоје, обратите се корисничкој подршци.

Спецификације

Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Surker webсајт. Сачувајте доказ о куповини за потребе гаранције.