1. Увод
The POWERTECH MP3752 is an intelligent and lightweight solar charge controller designed to manage the power flow from your solar panels to your battery bank. Utilizing Pulse Width Modulation (PWM) technology, it ensures efficient and safe battery charging. This controller offers a set-and-forget operation, providing maximum charge into your batteries without constant monitoring. It integrates essential safety features such as overload, short-circuit, over-discharge, and reverse-polarity protection. Additionally, a convenient USB port on the front panel allows for up to 1.2A charging, useful for mobile devices during power outages. The unit supports various battery types including sealed lead-acid, Gel, and flooded cells, and automatically selects the optimal charging mode (bulk, equalise, float).
2. Безбедносне информације
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, battery, or personal injury.
- Уверите се да су сви прикључци исправни и безбедни пре него што укључите напајање.
- Do not connect the solar controller to an AC power source.
- Инсталирајте контролер у добро проветреном простору, даље од запаљивих материјала и директне сунчеве светлости.
- Avoid short-circuiting the battery terminals or solar panel terminals.
- Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
- This device is not waterproof; protect it from moisture and water.
- Само квалификовано особље треба да обавља инсталацију и одржавање.
3. Карактеристике производа
- Automatic charge mode selection (Bulk, Equalise, Float).
- Suitable for both 12V and 24V battery banks.
- Integrated USB charging port (5V, 1.2A max) on the front panel.
- Supports sealed lead-acid, Gel, and flooded battery types.
- Comprehensive protection features: overload, short-circuit, over-discharge, reverse-polarity.
- Pulse Width Modulation (PWM) charging technology.
4. Садржај пакета
Молимо вас да проверите садржај пакета приликом пријема:
- 1 x POWERTECH MP3752 Solar Controller
- 1 x Упутство за употребу (овај документ)
5. Производ је готовview и Везе

Слика 1: Предња страна view of the POWERTECH MP3752 Solar Controller. This image displays the PV LOAD, UVW, LVD, Load ON, Over Load, Short-Circuit indicators, the USB port, and the connection terminals for solar panels, battery, and load.
The MP3752 controller features clearly marked terminals for easy connection. Refer to Figure 1 for a visual guide to the controller's layout and indicators.
Терминали за повезивање:
- Solar Panel Input (PV): Connect your solar panel array here. Ensure correct polarity (+ and -).
- Повезивање батерије: Connect your 12V or 24V battery bank here. Observe correct polarity (+ and -).
- Излаз оптерећења: Connect your DC loads (e.g., lights, fans) here. Observe correct polarity (+ and -).
- УСБ порт: 5V, 1.2A max output for charging small electronic devices.
6. Подешавање и инсталација
Пратите ове кораке за правилну инсталацију вашег соларног регулатора пуњења:
- Монтажа: Choose a dry, well-ventilated indoor location, away from direct sunlight, high temperatures, and moisture. Ensure sufficient air circulation around the controller.
- Повезивање батерије:
- Connect the positive (+) terminal of the battery to the battery positive (+) terminal on the controller.
- Connect the negative (-) terminal of the battery to the battery negative (-) terminal on the controller.
- The controller will automatically detect if it's a 12V or 24V system.
- Повезивање соларне плоче:
- Connect the positive (+) terminal of the solar panel to the solar panel positive (+) terminal on the controller.
- Connect the negative (-) terminal of the solar panel to the solar panel negative (-) terminal on the controller.
- Ensure the open-circuit voltage of the solar panel does not exceed the maximum input voltage of the controller (typically 50V for 12/24V systems).
- Учитавање везе:
- Connect the positive (+) terminal of your DC load to the load positive (+) terminal on the controller.
- Connect the negative (-) terminal of your DC load to the load negative (-) terminal on the controller.
- Do not exceed the maximum rated current for the load output (20A).
- Проверите везе: Double-check all connections for correct polarity and tightness before proceeding.

Figure 2: The POWERTECH MP3752 Solar Controller shown in its packaging, illustrating its application with solar panels. This image provides a contextual view of the product's intended use.
7. Упутство за употребу
7.1. Automatic System Voltagе Препознавање
The controller automatically detects whether the connected battery bank is 12V or 24V upon initial connection. Ensure the battery is connected first for proper voltagе детекција.
7.2. Режими пуњења
The MP3752 employs intelligent PWM charging, automatically cycling through different stages to optimize battery health and lifespan:
- Скупно пуњење: Delivers maximum current to rapidly bring the battery to approximately 80% charge.
- Equalise Charge: Periodically applies a higher voltage to equalize the charge among battery cells, preventing sulfation and extending battery life (for flooded batteries).
- Флоат Цхарге: Maintains the battery at a full charge by providing a small, constant voltage, compensating for self-discharge.
7.3. Load Control
The load output is controlled by the controller to prevent over-discharge of the battery. When the battery voltagе пада испод Лов Волtage Disconnect (LVD) threshold, the load output will be automatically disconnected. It will reconnect once the battery has recharged to the Low Voltage Reconnect (LVR) threshold.
Press the power button on the controller to manually turn the load output ON or OFF.
7.4. УСБ порт за пуњење
The 5V, 1.2A USB port can be used to charge small electronic devices like smartphones or tablets. This port is active as long as the battery has sufficient charge.
8. Индикатори
The POWERTECH MP3752 features several LED indicators to provide real-time status information:
- PV LOAD (Solar Panel Indicator):
- зелено: Solar panel is connected and generating power.
- Искључено: No solar input or insufficient light.
- Индикатор пуњења:
- зелено: Батерија се пуни.
- Искључено: Battery is fully charged or not charging.
- Оверволtagе Индикатор:
- црвено: Инпут волtage from solar panel is too high, or battery voltage is overcharge protection level.
- UVW (Battery Voltage Indicator): Multiple LEDs indicating battery charge level.
- ЛВД (низак звукtage Disconnect Indicator):
- црвено: Баттери волtage is low, load output has been disconnected.
- Load ON Indicator:
- зелено: Load output is active.
- Over Load Indicator:
- црвено: Load current exceeds the maximum rated current. Load output may be temporarily disconnected.
- Short-Circuit Indicator:
- црвено: Short-circuit detected on the load output. Load output will be disconnected.
9. Одржавање
To ensure optimal performance and longevity of your solar charge controller, regular maintenance is recommended:
- Чишћење: Periodically clean the exterior of the controller with a dry, soft cloth. Do not use solvents or abrasive cleaners.
- Везе: Annually check all wiring connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
- вентилација: Ensure that the ventilation openings are not blocked and that there is adequate airflow around the unit.
- инспекција: Inspect the controller for any signs of physical damage, discoloration, or unusual odors.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| No charging from solar panel. |
|
|
| Load output not working. |
|
|
| Оверволtagе индикатор је укључен. |
|
|
11. Спецификације
| Параметар | Валуе |
|---|---|
| Број модела | MP3752 (03617080) |
| Систем Волtage | 12V/24V Auto-sensing |
| Макс. Цхарге Цуррент | 20А |
| Макс. Струја оптерећења | 20А |
| УСБ излаз | 5В, 1.2А Мак |
| Цхаргинг Типе | PWM (Bulk, Equalise, Float) |
| Подржани типови батерија | Sealed Lead-Acid, Gel, Flooded |
| Димензије производа | 5.83 к 3.39 к 1.38 инча |
| Тежина артикла | 5.6 унци |
| Произвођач | ПОВЕРТЕЦХ |
| Бранд | Јаицар |
12. Гаранција и подршка
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.
Note: Unauthorized disassembly or modification of the product will void the warranty.





