Pelican Air 1637 Protective Case with Foam User Manual

Увод

This manual provides essential information for the proper use and maintenance of your Pelican Air 1637 Protective Case with Foam. Designed for superior protection, this case is up to 40% lighter than other polymer cases while maintaining Pelican's renowned durability. Please read these instructions carefully to ensure optimal performance and longevity of your product.

Опис слике: A black Pelican Air 1637 protective case shown from an angled top-front view. The case is closed, featuring robust latches, a front handle, and wheels visible on the bottom. The "PELICAN AIR" branding is visible on the top surface.

Садржај пакета

Приликом распакивања, проверите да ли су све компоненте присутне:

• Pelican Air 1637 Case
• Pre-scored Pick N Pluck Foam Set (installed)

Кључне карактеристике

• Лагани дизајн: Up to 40% lighter than traditional polymer cases.
• Crushproof Construction: Engineered to withstand extreme pressure.
• Dustproof Seal: Protects contents from fine particles.
• Watertight O-Ring Gasket: Ensures a secure, waterproof seal.
• Automatic Purge Valve: Balances air pressure inside the case, preventing vacuum lock.
• Pick N Pluck Foam: Customizable shock-absorbent foam for secure equipment fit.
• Увлачива ручка и точкови: За лак транспорт.

Setup: Customizing the Foam Interior

The Pelican Air 1637 case includes a Pick N Pluck foam set, allowing you to create a custom-fit interior for your equipment.

1. Планирајте свој изглед: Arrange your items on top of the foam to determine the best configuration. Ensure adequate spacing between items and from the case walls for maximum protection.
2. Pluck the Foam: The foam is pre-scored into small cubes. Carefully pluck out the foam cubes to match the outline of your equipment. For a cleaner cut, you may use a sharp utility knife.
3. Тестирање прилагођавања: Place your equipment into the customized foam cutouts to ensure a snug fit. Adjust as necessary.
4. Lid Foam: The lid typically contains convoluted (egg-crate) foam to provide pressure on the items when the case is closed, holding them securely in place.

Опис слике: A black Pelican Air 1637 protective case shown open, revealing the pre-scored Pick N Pluck foam in the base and convoluted (egg-crate) foam in the lid. The interior is ready for customization.

Упутство за употребу

Резе

To open the case, lift the latches upwards until they disengage from the lower part of the case. To close, align the lid with the base and press the latches down firmly until they click into place. Ensure all latches are securely fastened for a watertight and dustproof seal.

Retractable Handle and Wheels

The case is equipped with a retractable extension handle and durable wheels for easy transport.

• Проширивање ручке: Press the button located on the top of the handle and pull upwards until it locks into the desired extended position.
• Retracting the Handle: Press the button again and push the handle downwards until it fully retracts into the case body.
• Using the Wheels: Tilt the case and pull it using the extended handle. The wheels are designed for smooth rolling on various surfaces.

Опис слике: A black Pelican Air 1637 case standing upright with its retractable handle fully extended, ready for transport.

Опис слике: Страна view of the black Pelican Air 1637 case, showing the extended retractable handle and the integrated wheels at the base.

Automatic Purge Valve

The case features an automatic purge valve that equalizes air pressure inside the case with the outside atmospheric pressure. This prevents vacuum lock, making the case easy to open after changes in altitude or temperature, while maintaining its watertight integrity. No manual operation is required for the purge valve.

Одржавање

• Чишћење: Clean the exterior of the case with mild soap and water. For stubborn dirt, a soft brush can be used. Rinse thoroughly and dry completely.
• Инспекција О-прстена: Periodically inspect the O-ring gasket in the lid for any signs of damage, cracks, or debris. A clean, well-maintained O-ring is crucial for the watertight seal. If necessary, clean the O-ring and its groove with a soft cloth.
• Foam Care: The foam inserts can be gently vacuumed to remove dust and debris. Avoid harsh chemicals that may degrade the foam material.
• Latch and Hinge Check: Ensure latches and hinges operate smoothly and are free from obstruction. Lubricate with a silicone-based spray if needed.

Решавање проблема

• Case is difficult to open: This may occur after significant changes in altitude or temperature due to pressure differences. The automatic purge valve should equalize pressure, but if it's stuck, ensure it's clear of debris. Wait a few moments for pressure to equalize.
• Water or dust ingress: Check the O-ring gasket for proper seating, cleanliness, and damage. Ensure all latches are fully closed and secured.
• Latches are stiff: Clean any dirt or debris from the latch mechanism. A small amount of silicone lubricant can improve operation.

Спецификације

Опис слике: A black Pelican Air 1637 case shown upright with its exterior dimensions (length, width, height) clearly labeled in inches.

Гаранција и подршка

The Pelican Air 1637 Case is backed by Pelican's legendary Доживотна гаранција. This warranty guarantees the case against breakage or defects in workmanship for the life of the product. For detailed warranty information or to contact customer support, please visit the official Pelican webсајт или погледајте гарантни лист који сте добили уз куповину.

Такође можете посетити Pelican Store on Amazon за више информација и производа.