Увод
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Слика 1: Предња страна view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Сетуп
1. Распакивање и преглед
- Пажљиво извадите штампач и сву додатну опрему из паковања.
- Проверите да ли су присутне све компоненте наведене у паковању.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Инсталација и пуњење батерије
- Уверите се да је штампач искључен.
- Пронађите одељак за батерију на штампачу.
- Уметните батерију, водећи рачуна да контакти буду правилно поравнати.
- Добро затворите одељак за батерије.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Убацивање термалног папира
- Отворите поклопац одељка за папир.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Блуетоотх: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Тражи available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- УСБ: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- серијал: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Упутство за употребу
1. Укључивање/искључивање
- Да бисте укључили, притисните и држите дугме за напајање док екран не засветли.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Штампање рачуна
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Коришћење ЛЦД екрана
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Одржавање
1. Чишћење главе за штампање
- Power off the printer and disconnect it from any power source.
- Отворите одељак за папир.
- Gently wipe the print head surface with a lint-free cloth dampнапуњен изопропил алкохолом.
- Оставите главу за штампање да се потпуно осуши пре него што затворите поклопац и укључите штампач.
- Perform this cleaning regularly, especially if print quality degrades.
2. Брига о батерији
- Да бисте максимално продужили век трајања батерије, избегавајте често потпуно пражњење батерије.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Генерално чишћење
Обришите спољашњост штампача меком,amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Штампач се не укључује | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Нема штампаног излаза | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Лош квалитет штампе | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Проблеми са повезивањем | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Назив модела | PB51B33004100 |
| Технологија штампе | Дирецт Тхермал |
| Излаз штампача | Моноцхроме |
| Максимална величина медија | 4 инча |
| Технологија повезивања | USB, Serial, Bluetooth |
| Тежина артикла | 42 Ounces (approx. 2.63 lbs) |
| Димензије пакета | 10.2 к 10 к 5 инча |
| Тип контролера | Андроид (компатибилан) |
| Произвођач | Интермец |
Гаранција и подршка
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) webсајт за детаљне услове гаранције.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
