ABB PM/a1.5.1.1 Mini Presence Detector User Manual

1. Важне информације о безбедности

Упозорење: Electrical engineering work must only be carried out by qualified electricians or under their direct supervision. Always adhere to country-specific standards and regulations for electrical installations. Consult a local electrical installer if you are unsure.

• Devices with a connection value greater than 380 V/400 V require a high current connection and must only be connected by an approved electrician.
• For devices with a rated power exceeding 12 kW, approval from your network operator may be required (this applies to Germany; other countries may have different regulations).

This manual provides instructions for the safe and efficient use of the ABB PM/a1.5.1.1 Mini Presence Detector.

2. Производ је готовview

The ABB PM/a1.5.1.1 Mini Presence Detector is a KNX-compatible device designed for intelligent room automation. It functions as both a presence and motion detector, enabling efficient control of lighting based on occupancy and ambient brightness.

Image showing the compact design of the ABB PM/a1.5.1.1 Mini Presence Detector.

3. Подешавање и инсталација

The ABB PM/a1.5.1.1 Mini Presence Detector is designed for surface mounting and is suitable for installation in suspended ceilings.

3.1 Смернице за монтажу

• Тип монтаже: Surface-mounted.
• Оптимална висина монтаже: 3 meters (9.84 feet) for best detection coverage.
• Висина инсталације: The device has an installation height of 16 mm.
• Detection Field: The detection field diameter on the floor is 8 meters.

3.2 Електрични прикључак

• The detector features an integrated KNX bus coupler for seamless integration into KNX systems.
• Ensure all wiring is performed by a qualified electrician in accordance with local electrical codes and safety standards.

4. Упутство за употребу

The presence detector offers versatile control options for lighting and other functions within a room.

4.1 Detection Capabilities

• Функција: Operates as a presence detector, motion detector, or a combination of both.
• Detection Range (at 2.5m mounting height):
  • Seated persons: max. 5 meters
  • Walking persons: max. 6.5 meters
• Detection Range (at 3m mounting height):
  • Seated persons: max. 6.5 meters
  • Walking persons: max. 8 meters
• Detection Range (at 4m mounting height):
  • Seated persons: max. 9 meters
  • Walking persons: max. 10.5 meters
• Anti-creep protection/field monitoring: Ensures comprehensive coverage and prevents blind spots.

4.2 Контрола осветљења

• Канали: The device features 2 independent channels for controlling different light strips or zones.
• Подешавање осветљености: Adjustable response brightness and a teach function for setting optimal brightness levels.
• Constant Light Switch: Functions as a constant light switch with up to 2 independent channels, allowing brightness-dependent switching of two light strips.
• Логика управљања: Lighting can be controlled based on both room brightness and detected movement.

4.3 Оперативни параметри

• Minimum Duty Cycle: 10 секунди.
• Максимално време рада: 1092 минута.

5. Одржавање

The ABB PM/a1.5.1.1 Mini Presence Detector is designed for long-term, maintenance-free operation. To ensure optimal performance:

• Keep the detector lens clean and free from dust or obstructions. Use a soft, dry cloth for cleaning.
• Do not use abrasive cleaners or solvents, as these may damage the device.
• There are no user-serviceable parts inside the device. Do not attempt to open or repair the detector yourself.

КСНУМКС. Решавање проблема

If you experience issues with your ABB PM/a1.5.1.1 Mini Presence Detector, consider the following common troubleshooting steps:

• Без детекције:
  • Verify that the detector lens is clean and unobstructed.
  • Check the mounting height and ensure it is within the optimal range (3 meters) for the desired detection area.
  • Confirm that the KNX bus connection is secure and powered.
  • Review the configured detection parameters in your KNX system to ensure they match your requirements.
• Incorrect Lighting Behavior:
  • Check the configured brightness thresholds and teach function settings.
  • Ensure the correct channels are assigned to the respective light strips in the KNX programming.
  • Verify that there are no external light sources interfering with the detector's ambient light sensor.
• Уређај не реагује:
  • Ensure the power supply to the KNX bus is active.
  • If the issue persists, consult a qualified electrician or ABB technical support.

For complex issues, always contact a qualified electrician or ABB customer support.

7. Техничке спецификације

8. Гаранција и подршка

For warranty information, please refer to the documentation provided with your purchase or visit the official ABB website. ABB products are typically covered by a manufacturer's warranty against defects in materials and workmanship.

If you require technical assistance, have questions about installation, or need to report a fault, please contact ABB customer support:

• Visit the official ABB webсајт за ресурсе подршке и контакт информације.
• Погледајте контакт информације које се налазе на паковању вашег производа.

Always provide your product model number (6132-0-0342) and part number (6131/20-24-500) when contacting support for faster service.