Увод
This manual provides comprehensive instructions for the safe operation, maintenance, and parts identification of the JET JWS-18HO Wood Shaper. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage. Keep this manual accessible for future reference.
This image displays the front cover of the JET JWS-18HO Wood Shaper Operator's Manual. It features the JET logo at the top, followed by 'EQUIPMENT & TOOLS' and 'OPERATOR'S MANUAL'. Below this, the model 'JWS-18HO WOOD SHAPER' is clearly visible. A black and white illustration of the JWS-18HO wood shaper machine is centrally placed, showing its main body and stand. The manual number 'M-708319' is located at the bottom right corner.
Безбедносне информације
Увек се придржавајте основних мера предострожности како бисте смањили ризик од пожара, струјног удара и телесних повреда. То укључује, али није ограничено на:
- Носите одговарајућу личну заштитну опрему (ЛЗО), укључујући заштиту за очи, заштиту за слух и маске за прашину.
- Уверите се да је радни простор чист, добро осветљен и без препрека.
- Do not operate the shaper in damp или влажне локације.
- Држите децу и посматраче даље од машине у раду.
- Disconnect power before making adjustments, changing cutters, or performing maintenance.
- Use push sticks or push blocks when feeding small workpieces.
- Never reach into the cutter area while the machine is running.
- Ensure all guards are in place and functioning correctly before operation.
Подешавање и монтажа
Before operating your JET JWS-18HO Wood Shaper, ensure it is properly assembled and installed. Refer to the exploded view diagrams in the parts section for component identification.
- Распакивање: Пажљиво извадите све компоненте из паковања. Проверите да ли има оштећења приликом транспорта.
- Склоп базе: Assemble the stand or base according to the provided hardware and instructions. Ensure all fasteners are securely tightened.
- Mounting the Shaper: Securely mount the shaper unit to the assembled stand or a sturdy workbench using appropriate bolts and washers.
- Електрични прикључак: Connect the machine to a grounded power outlet of the correct voltage as specified in the electrical requirements section (refer to wiring diagram).
- Прве провере: Verify that all moving parts operate freely and that no components are loose.
Упутство за употребу
Familiarize yourself with the controls and functions of the JWS-18HO Wood Shaper before beginning any work.
Цонтролс Оверview:
- Прекидач: ON/OFF switch for the motor.
- Закључавање вретена: Engages to hold the spindle for cutter changes.
- Spindle Height Adjustment: Wheel or lever to raise and lower the spindle.
- Подешавање ограде: Knobs or levers to position the fence for desired cut depth.
Основна операција:
- Cutter Installation: Ensure the machine is unplugged. Select the appropriate cutter for your task. Install it securely on the spindle, ensuring proper orientation and tightening.
- Fence and Spindle Adjustment: Adjust the fence to control the depth of cut and the spindle height to expose the correct amount of the cutter. Perform test cuts on scrap material.
- Workpiece Feeding: Always feed the workpiece against the direction of cutter rotation. Use push sticks for safety. Maintain a firm grip and consistent feed rate.
- Сакупљање прашине: Connect a dust collection system to the shaper for a cleaner and safer work environment.
Одржавање и подмазивање
Regular maintenance ensures the longevity and optimal performance of your JWS-18HO Wood Shaper. Always disconnect power before performing any maintenance.
- Чишћење: After each use, clean the machine thoroughly, removing sawdust and debris from the table, fence, and motor housing.
- подмазивање: Periodically lubricate moving parts such as spindle height adjustment mechanisms and fence slides. Refer to the lubrication points diagram (if available in the full manual) for specific locations and recommended lubricants.
- Cutter Inspection: Inspect cutters for sharpness and damage. Replace dull or damaged cutters promptly.
- Затегнутост појаса: Check drive belt tension periodically and adjust as necessary to prevent slippage.
- Електроинспекција: Regularly inspect the power cord and plug for damage.
Листа делова и експлозија View Дијаграми
This section contains detailed exploded view diagrams and a corresponding parts list to assist with identification and ordering of replacement parts. Each diagram illustrates specific assemblies of the JWS-18HO Wood Shaper, with numbered components corresponding to the parts list.
(Note: Actual diagrams and lists would be included here in a complete manual. For example, a diagram of the spindle assembly with numbered parts, followed by a table listing part numbers and descriptions.)
| Ставка бр. | Парт Нумбер | Опис | Количина |
|---|---|---|---|
| 1 | JWS18HO-001 | Склоп вретена | 1 |
| 2 | JWS18HO-002 | Table Insert Ring | 3 |
| 3 | JWS18HO-003 | Монтажа ограде | 1 |
Решавање проблема
This section provides solutions to common operational issues. If you encounter a problem not listed here, or if the suggested solutions do not resolve the issue, contact qualified service personnel.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Машина се не покреће | Нема струје, неисправан прекидач, искључен осигурач | Check power connection, inspect switch, reset breaker |
| Прекомерне вибрације | Unbalanced cutter, loose mounting, worn bearings | Ensure cutter is balanced and tight, check mounting bolts, inspect bearings |
| Лош квалитет сечења | Dull cutter, incorrect feed rate, improper fence setting | Replace or sharpen cutter, adjust feed rate, verify fence alignment |
Спецификације
Technical specifications for the JET JWS-18HO Wood Shaper are provided below. These specifications are subject to change without notice for product improvement.
- Модел: JWS-18HO
- Мотор: Example: 1.5 HP, 120V, 60Hz, 1 Phase
- Брзина вретена: Example: 7,000 / 10,000 RPM
- Пречник вретена: Example: 1/2", 3/4"
- Величина табеле: Example: 20" x 24"
- Висина стола: Example: 34"
- Тежина: Example: 250 lbs
Корисничка подршка
For technical assistance, replacement parts, or service inquiries, please refer to the product packaging or the official JET website. Have your model number (JWS-18HO) and serial number ready when contacting support.
