Упутство за употребу јединице за филтер за песак у базену GAME SandPRO 50D серије

Увод

This manual provides essential information for the safe and efficient operation and maintenance of your GAME SandPRO 50D Series Pool Sand Filter Unit. This high-performance filtration system is designed for above-ground pools, offering energy-efficient water circulation and superior filtration. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your unit.

Image: The GAME SandPRO 50D Series Pool Sand Filter Unit, showcasing its compact design and main components including the sand tank, pump, and multi-port valve.

Безбедносне информације

УПОЗОРЕЊЕ: Овај производ садржи хемикалије за које је држава Калифорнија утврдила да изазивају рак и урођене мане или друге репродуктивне штете. За више информација посетите ввв.П65Варнингс.ца.гов.

Always follow basic safety precautions when installing and operating this electrical equipment. Refer to the official Safety Information PDF document for comprehensive safety guidelines.

• Ensure the unit is installed on a solid, level surface.
• Do not operate the pump if the ground is wet or if you are standing in water.
• Увек искључите напајање пре него што извршите било какво одржавање или сервисирање.
• Keep children and unauthorized persons away from the unit during operation.
• Ensure all electrical connections are properly grounded and protected by a Ground-Fault Circuit Interrupter (GFCI).

Подешавање и инсталација

Proper setup is crucial for the optimal performance of your SandPRO 50D filter unit. Follow these steps carefully:

1. Пласман: Position the filter unit on a stable, level surface near your above-ground pool. Ensure adequate drainage and protection from direct weather exposure if possible.
2. Пуњење песком: The SandPRO 50D requires 50 pounds of medium-grade pool filtering sand, also known as #20 silica sand. Do not use regular sand or other filtering media unless specified by the manufacturer. Carefully pour the sand into the filter tank, ensuring the standpipe is centered.

Image: A person adding 50 pounds of #20 silica sand into the filter tank, illustrating the sand filling process.
3. Multi-Port Valve Installation: Securely attach the multi-port valve to the top of the sand tank. Ensure the O-ring is properly seated and the clamp is tightened evenly.
4. Прикључци црева: Connect the hoses from your pool to the appropriate ports on the multi-port valve and pump. The unit includes adapters for Intex pools (32 mm, 40 mm, 1-1/4-in, & 1-1/2-in hose fittings). Ensure all hose clamps are tightened securely to prevent leaks, but avoid over-tightening which can damage fittings.


Image: The SandPRO 50D filter unit connected to an above-ground pool, demonstrating the typical setup with hoses.

5. Електрични прикључак: Connect the pump to a properly grounded electrical outlet protected by a GFCI.

For detailed diagrams and step-by-step instructions, please refer to the comprehensive User Guide (PDF) provided by the manufacturer.

Упутство за употребу

The SandPRO 50D features an easy-to-operate 4-position rotary valve for various functions:

Слика: Детаљна view of the multi-port valve with its 4-way handle, the integrated pressure gauge, and the transparent lid of the strainer basket.

• ФИЛТЕР: Ово је стандардни режим рада за дневну филтрацију. Вода се пумпа кроз песковити слој, хватајући отпад и враћајући се у базен.
• БАЦКВАСХ: Used to clean the sand filter. Water flow is reversed, flushing trapped debris out through the waste port. Perform backwash when the pressure gauge reading increases by 5-10 PSI above its clean operating pressure.
• ИСПИРАЊЕ: After backwashing, this mode settles the sand bed and flushes any remaining dirty water to waste before returning to FILTER mode.
• ЗИМИТИ: Prepares the filter for off-season storage. Consult the user guide for specific winterization procedures.

The integrated pressure gauge allows you to monitor the filter's performance. A rising pressure indicates that the filter media is becoming clogged and requires backwashing.

Одржавање

Regular maintenance ensures the longevity and efficiency of your SandPRO 50D filter unit:

• Корпа за цеђење: Periodically check and clean the large-capacity easy-to-clean hair & debris strainer basket. The see-through lid allows for easy inspection. Turn off the pump before opening the basket.
• Backwashing & Rinsing: Perform backwashing and rinsing as needed, typically when the pressure gauge indicates a 5-10 PSI increase from its clean operating pressure.
• Замена песка: The #20 silica sand typically needs replacement every 3-5 years, depending on usage and water quality. Refer to the user guide for instructions on replacing the sand.

Решавање проблема

If you encounter issues with your SandPRO 50D, consider the following common troubleshooting tips:

For more complex issues or if troubleshooting steps do not resolve the problem, refer to the detailed troubleshooting section in the official User Guide (PDF).

Спецификације

• Модел: 4710-ББ
• Pump Horsepower: 0.5 ХП
• Maximum Pool Capacity: До 10,000 галона
• Брзина протока: 40 ГПМ (галона у минути)
• Sand Requirement: 50 lbs of #20 Silica Sand (not included)
• Димензије производа: 17.64 к 17.77 к 24.82 инча
• Тежина артикла: 21 фунти
• Произвођач: ГАМЕ

Гаранција и подршка

For warranty information, technical support, or to inquire about replacement parts, please contact GAME customer service. Replacement parts for SandPRO filters are exclusively available through GAME.

You can also refer to the official User Guide (PDF) for additional information: Упутство за употребу (ПДФ)