AMS F5962

AMS F5962 Radio-Controlled Wall Clock User Manual

Модел: Ф5962

1. Увод

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Производ је готовview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Слика 1: Предња страна view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Садржај пакета

Молимо вас да проверите садржај пакета приликом распакивања. Уверите се да су сви предмети присутни и да су неоштећени.

4. Подешавање

4.1 Инсталација батерије

  1. Пронађите одељак за батерије на полеђини сата.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Добро затворите поклопац одељка за батерије.

Важно: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Напомена: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Монтирање сата

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Упутство за употребу

Once set up, the AMS F5962 operates automatically.

6. Одржавање

6.1 Чишћење

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 Замена батерије

Када казаљке на сату престану да се померају или време постане нетачно, вероватно је време да замените батерију.

  1. Уклоните стару батерију из одељка.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Напомена о животној средини: Please dispose of used batteries responsibly according to local regulations.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Clock hands do not move or stop.Испражњена батерија.Замените батерију новом.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Сметње од друге електронике.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Ensure the battery is fresh.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Спецификације

БрандАМС
Број моделаФ5962
Дисплаи ТипеАналогно
Посебна карактеристикаRadio-Controlled Time Synchronization
МатеријалПаинтед Метал
БојаBeige (dial), Brown (housing)
СтилеАнтикуе
Димензије производа35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Тежина артикла1.22 кг
Извор напајањаБаттери Поверед
Унутрашња/спољна употребаИндоор

9. Гаранција и подршка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS webсајт за даљу помоћ.

Повезани документи - Ф5962

Преview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Преview Упутство за употребу зидног сата AMS
Упутство за употребу AMS зидних сатова, које покрива инсталацију батерија, замену и општу употребу на више језика.
Преview Упутство за евалуацију комплета за адаптерску плочу ams AS5600L
Овај приручник пружа свеобухватне информације за адаптерску плочу ams AS5600L-WL_EK_AB, укључујући садржај комплета, опис плоче, упутства за монтажу, детаље распореда пинова, рад у I2C режиму, хардверске шеме, распоред штампане плоче и информације за наручивање.
Преview Упутство за употребу 14-битног ротационог сензора положаја ams AS5048
Ово корисничко упутство пружа детаљне информације о ams AS5048, 14-битном ротационом сензору положаја са дигиталним углом и PWM излазом. Покрива адаптерску плочу AS5048, монтажу, распоред пинова, сценарије рада (SPI, Daisy Chain), кодирање фирмвера и т.д.ampдатотеке и хардверске шеме. Неопходно за инжењере који интегришу овај сензор у своје системе.
Преview ams AS5048 Adapter Board Evaluation Kit Manual
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Преview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.