Упутство за употребу цевасте браве Codelocks CL310K

Увод

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Codelocks CL310K Tubular Deadbolt. The CL310K is a robust mechanical keyless lock designed for access control, featuring a 13-button keypad offering over 8,000 possible combinations. It is designed to retrofit over a 2 1/8" door preparation and includes a key override function with a 6-pin cylinder.

Please read these instructions carefully before installation and use to ensure proper function and longevity of your lock.

Производ је завршенview

Слика: Фронт view of the Codelocks CL310K Tubular Deadbolt, showcasing the numerical keypad and the key override cylinder at the bottom. The lock features a brushed steel finish.

The Codelocks CL310K is a mechanical push-button lock that does not require batteries or external power. It is designed for ease of use and security. Key features include:

• Улаз без кључа: Access is gained by entering a user-defined code on the 13-button keypad.
• Замена кључа: Equipped with a 6-pin cylinder and two keys for traditional key access.
• Издржљива конструкција: Made from alloy steel with a brushed finish for longevity.
• Easy Code Change: The factory-set code can be easily changed by the user as often as required.
• Разноврсна инсталација: Designed to retrofit over standard 2 1/8" door preparations.

Подешавање и инсталација

Proper installation is crucial for the optimal performance of your CL310K deadbolt. It is recommended to have basic DIY skills or consult a professional for installation.

Контролна листа пре инсталације:

• Ensure your door has a standard 2 1/8" (54mm) bore hole for the lock body.
• Verify door thickness is compatible (typically 35mm-60mm).
• Gather necessary tools: Phillips head screwdriver, tape measure, pencil.
• Распакујте све компоненте и проверите их у односу на листу паковања.

Кораци инсталације:

1. Припремите врата: If not already present, drill a 2 1/8" (54mm) bore hole through the door and a 1" (25mm) bore hole into the door edge for the latch mechanism.
2. Инсталирајте Латцхболт: Insert the dual-backset latchbolt into the door edge. Ensure the correct backset (60mm or 70mm) is selected and the latch faceplate is flush with the door edge. Secure with screws.
3. Install Spindles: Insert the appropriate spindles through the latchbolt mechanism.
4. Mount Outer Body: Position the outer lock body (with keypad) onto the door, aligning the spindle and through-bolts with the latch and inner mounting plate.
5. Mount Inner Body: Attach the inner lock body to the outer body using the provided screws, ensuring the lock is plumb and level. Do not overtighten.
6. Пробни рад: Before closing the door, test the deadbolt's operation with both the keypad code and the key override. Ensure the deadbolt extends and retracts smoothly without binding.

For detailed diagrams and specific measurements, refer to the included installation template.

Упутство за употребу

Unlocking with Code:

1. Enter your code by pressing the buttons in the correct sequence. The CL310K allows code entry in any sequence (non-sequential).
2. Once the correct buttons are pressed, turn the handle/knob to retract the deadbolt.
3. Release the handle/knob to allow the deadbolt to extend and secure the door.

Закључавање врата:

To lock the door, simply close it. The deadbolt will automatically extend. For enhanced security, ensure the deadbolt is fully extended into the strike plate.

Changing the Code:

The CL310K comes with a random factory-set code. It is highly recommended to change this code immediately after installation.

1. Remove the lock from the door (or access the code change plate on the back of the outer body).
2. Locate the code change pins/tumblers on the back of the keypad unit.
3. Using a small tool (e.g., tweezers or a small screwdriver), rotate the pins corresponding to your desired new code. Pins should be set to 'ON' for numbers in the code and 'OFF' for numbers not in the code.
4. Reassemble the lock onto the door.
5. Test the new code multiple times with the door open before closing and locking.

Важно: Always record your new code in a secure location. Do not share your code with unauthorized individuals.

Одржавање

Regular maintenance ensures the smooth and reliable operation of your Codelocks CL310K.

• Чишћење: Wipe the exterior of the lock with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish or internal components.
• подмазивање: Periodically (e.g., every 6-12 months), apply a small amount of graphite powder or a silicone-based lubricant to the keyway and the latchbolt mechanism. Do not use oil-based lubricants as they can attract dirt.
• Затегнутост завртња: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
• Поравнање врата: Ensure your door remains properly aligned and does not sag, as this can cause the deadbolt to bind or operate stiffly.

Решавање проблема

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Codelocks customer support.

Спецификације

• Модел: ЦЛ310К
• Тип браве: Mechanical Push-Button Deadbolt with Key Override
• Материјал: легирани челик
• завршити: Брушени челик
• Комбинације: Over 8,000 possible (13 buttons, non-sequential)
• Припрема врата: Designed for 2 1/8" (54mm) bore holes
• Бацксет: Dual-backset (60mm/70mm) latchbolt included
• Key Cylinder: 6-pin cylinder
• Кључеви: 2 укључено
• Тип контролера: Ханд Цонтрол
• Ставка Количина паковања: 1

Гаранција и подршка

Codelocks products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Codelocks webсајту.

For technical assistance, replacement parts, or further inquiries, please contact Codelocks customer support:

• Webсајт: ввв.цоделоцкс.ус
• Телефон: Refer to Codelocks official webсајт за регионалне контакт бројеве.

When contacting support, please have your product model (CL310K) and purchase information ready.