Hager WITTY станица за пуњење електричних возила (модел XEV103) упутство за употребу

1. Увод

1.1. Готовоview

The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.

1.2. Безбедносна упутства

• Installation must be performed by a qualified electrician in accordance with local and national electrical codes.
• Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
• Уверите се да је станица за пуњење правилно уземљена.
• Do not use the charging station if it is damaged or shows signs of malfunction.
• Keep children and unauthorized persons away from the charging station during operation.
• Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.

2. Опис производа

2.1. Карактеристике

• Compatible with Mode 3 (Type 3) and Mode 2 charging.
• Free access operation.
• Power output: 4 kW to 22 kW.
• Input: 3-phase + Neutral, 32A.
• Integrated status indicator light.

2.2. Компоненте

The Hager WITTY charging station typically includes:

• Charging station unit
• Монтажни хардвер (шрафови, анкери)
• Упутство за употребу (овај документ)

Слика 1: Фронт view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.

Слика 2: Сиде view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.

Слика 3: Детаљан предњи део view of the Hager WITTY charging station, emphasizing the integrated green status light.

3. Подешавање

3.1. Локација инсталације

Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.

3.2. Монтажа

1. Mark the drilling points on the wall using the provided template (if applicable) or by measuring the mounting holes on the unit.
2. Избушите рупе и уметните одговарајуће зидне анкере.
3. Secure the charging station to the wall using the provided screws.

3.3. Електрични прикључак

УПОЗОРЕЊЕ: Електричну инсталацију мора извршити квалификовани електричар.

1. Ensure the main power supply is disconnected before beginning any electrical work.
2. Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
3. Ensure proper grounding is established.
4. Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
5. Close the charging station cover securely.

4. Оперативни

4.1. Starting a Charge

1. Ensure the charging station is powered on and the status indicator light is green (ready).
2. Connect the charging cable to your electric vehicle's charging port.
3. Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
4. The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.

4.2. Stopping a Charge

1. Disconnect the charging cable from your electric vehicle first.
2. Disconnect the charging cable from the charging station.
3. The charging station will return to a ready state (green indicator light).

4.3. Индикатори статуса

• зелено светло: Ready for charging.
• Blue Light (or flashing green): Пуњење је у току.
• Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
• Без светла: Power off or system fault.

5. Одржавање

5.1. Чишћење

Очистите спољашњост станице за пуњење меком,amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.

5.2. Инспекција

Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.

КСНУМКС. Решавање проблема

7. Спецификације

8. Гаранција и подршка

For warranty information and technical support, please refer to the official Hager website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.

Spare parts availability: Information not available.