Intermec PB22 Direct Thermal Portable Printer User Manual

1. Увод

The Intermec PB22 Direct Thermal Portable Printer is a rugged, compact mobile device designed for on-the-go label and receipt printing. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB22 printer, ensuring optimal performance and longevity.

This image displays the Intermec PB22 Direct Thermal Portable Printer, a compact and rugged mobile device. A thermal label with a barcode and text is shown exiting the printer's front slot, indicating its primary function for label and receipt printing. The printer features a dark gray and black casing with a blue indicator light on the side.

2. Безбедносне информације

Please read all safety instructions before using the printer to prevent injury or damage to the device.

• Do not expose the printer to extreme temperatures, direct sunlight, or high humidity.
• Use only Intermec-approved power adapters and batteries.
• Keep the printer away from liquids. If liquid enters the device, disconnect power immediately.
• Не покушавајте да растављате или модификујете штампач. Сва сервисирања препустите квалификованом особљу.
• Обезбедите одговарајућу вентилацију током рада и пуњења.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• Intermec PB22 Portable Printer Unit
• Пуњива батерија
• АЦ адаптер
• УСБ кабл
• Кратки водич или документација
• Sample Roll of Thermal Media (may vary by region)

4. Подешавање

4.1. Распакивање

Carefully remove the printer and all accessories from the packaging. Retain the packaging for future storage or shipping.

4.2. Пуњење батерије

1. Insert the rechargeable battery pack into the battery compartment on the printer, ensuring it clicks into place.
2. Connect the AC power adapter to the printer's power port.
3. Plug the power adapter into a wall outlet. The charging indicator light will illuminate.
4. Оставите батерију да се потпуно напуни пре прве употребе (отприлике 2-4 сати).

4.3. Loading Thermal Media

1. Open the media cover latch and lift the cover.
2. Place the thermal media roll into the media compartment, ensuring the print side faces the print head.
3. Pull a small amount of media out past the print head and align it with the media guides.
4. Чврсто затворите поклопац медија док се не закључа.

4.4. Повезивање

The PB22 printer supports USB and Bluetooth connectivity.

УСБ веза:

• Connect one end of the USB cable to the printer's USB port.
• Connect the other end to your host device (e.g., computer, smartphone with appropriate adapter).
• Install the necessary drivers or applications as prompted by your operating system or device.

Блуетоотх веза:

• Ensure Bluetooth is enabled on your host device (e.g., smartphone, tablet).
• Turn on the PB22 printer.
• On your host device, search for available Bluetooth devices. The PB22 should appear in the list.
• Select the PB22 and follow the pairing instructions. You may be prompted for a PIN (default is usually 0000 or 1234).

4.5. App Installation (for Android Devices)

For control via an Android device, download and install the appropriate Intermec printing application from your device's app store or Intermec's official support website. This app will facilitate printing and configuration.

5. Руковање штампачем

5.1. Укључивање/искључивање

• Да бисте укључили: Притисните и држите дугме за напајање док се индикаторска лампица не упали.
• Да бисте искључили напајање: Притисните и држите дугме за напајање док се индикаторска лампица не угаси.

5.2. Основно штампање

1. Ensure the printer is powered on and connected to your host device (via USB or Bluetooth).
2. Open the document or application from which you wish to print (e.g., a label design software, a mobile app).
3. Select the print option within the application.
4. Choose the Intermec PB22 as your printer.
5. Confirm print settings (e.g., number of copies, label format) and initiate the print job.

5.3. Индикатори статуса

The printer features indicator lights that provide information about its status:

• Стално зелено: Printer is on and ready.
• Трепери зелено: Data is being received or processed.
• Пуно црвено: Error condition (e.g., out of paper, print head open).
• Трепери црвено: Ниска батерија.
• Пуна плава: Блуетоотх повезан.

6. Одржавање

6.1. Чишћење главе за штампање

Regular cleaning of the print head ensures optimal print quality. Use a lint-free cloth dampнапуњен изопропил алкохолом.

1. Turn off the printer and disconnect the power adapter.
2. Отворите поклопац медија.
3. Gently wipe the print head surface from center to edge.
4. Allow the print head to dry completely before closing the cover and powering on.

6.2. Чишћење екстеријера

Обришите спољашњост штампача меком,amp тканина. Немојте користити јаке хемикалије или абразивна средства за чишћење.

6.3. Брига о батерији

• Избегавајте често потпуно пражњење батерије.
• Store the printer with a partially charged battery if not used for extended periods.
• Replace the battery if its capacity significantly diminishes.

6.4. Складиштење

Store the printer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for a long period, remove the battery.

КСНУМКС. Решавање проблема

8. Спецификације

9. Гаранција и подршка

For information regarding warranty coverage, technical support, and service options for your Intermec PB22 printer, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) support website. You can typically find drivers, firmware updates, and detailed user guides there.

For direct assistance, contact Intermec/Honeywell customer support through their official channels.