1. Увод
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Rittal 3304.500 Blue e Wallmount Cooling Unit. Please read this manual thoroughly before attempting to install or operate the unit. Retain this document for future reference.
2. Безбедносне информације
Важна безбедносна упутства:
- Only qualified and authorized personnel should install, operate, or service this equipment.
- Disconnect all power to the unit before performing any maintenance or service. Failure to do so can result in serious injury or death.
- Ensure proper grounding of the unit in accordance with local and national electrical codes.
- Do not block air inlets or outlets. Maintain adequate clearance for proper airflow.
- Never operate the unit with damaged power cords or if it has been dropped or damaged.
- This unit contains refrigerants under pressure. Servicing should only be performed by certified technicians.
3. Производ је готовview
The Rittal 3304.500 Blue e Wallmount Cooling Unit is designed for efficient thermal management within industrial enclosures. It provides 3753 BTU/h of cooling capacity, operating on a 230V, 1-phase, 50/60 Hz power supply. Constructed from carbon steel, this unit is built for durability and reliable performance in demanding environments. Its wall-mount design allows for space-saving installation.

Слика 3.1: Предња страна view of the Rittal 3304.500 Blue e Wallmount Cooling Unit, showing its compact design and air vents.
4. Подешавање и инсталација
4.1 Распакивање и преглед
- Пажљиво извадите јединицу из амбалаже.
- Прегледајте уређај да ли има знакова оштећења приликом транспорта. Одмах пријавите сваку штету превознику.
- Проверите да ли су присутне све компоненте наведене у паковању.
4.2 Монтажа јединице
- Select a suitable location on the enclosure wall, ensuring sufficient space for airflow and maintenance.
- Use the provided mounting template (if applicable) to mark drilling points.
- Drill holes and securely fasten the unit to the enclosure using appropriate hardware. Ensure the mounting surface can support the unit's weight (approximately 86 lbs).
- Ensure a tight seal between the cooling unit and the enclosure to prevent dust and moisture ingress.
4.3 Електрични прикључак
- All electrical connections must be performed by a licensed electrician in accordance with local and national electrical codes.
- Connect the unit to a dedicated 230V, 1-phase, 50/60 Hz power supply.
- Уверите се да је на месту одговарајућа заштита од прекомерне струје.
- Verify correct grounding of the unit.
5. Упутство за употребу
5.1 Прво покретање
- After installation and electrical connection are complete and verified, switch on the power supply to the unit.
- The unit will typically perform a self-test upon startup.
5.2 Подешавање температуре
- The unit features an integrated controller for temperature management. Refer to the specific controller's manual for detailed programming instructions.
- Set the desired internal enclosure temperature. The unit will automatically cycle to maintain this setpoint.
5.3 Operation Indicators
- Observe the display and indicator lights (if present) for operational status and any fault messages.
- A steady green light typically indicates normal operation.
6. Одржавање
Regular maintenance ensures optimal performance and extends the lifespan of your cooling unit. Always disconnect power before performing maintenance.
6.1 Filter Mat Replacement/Cleaning
- Check filter mats regularly (e.g., monthly or as environmental conditions dictate).
- Replace or clean dirty filter mats to ensure adequate airflow and cooling efficiency. Refer to the unit's specific design for filter access.
6.2 Condensate Management
- Periodically inspect the condensate drain for blockages.
- Ensure the condensate drain is clear and functioning correctly to prevent water accumulation.
6.3 Општи преглед
- Inspect the unit for any loose connections, unusual noises, or vibrations.
- Ensure all mounting hardware remains secure.
КСНУМКС. Решавање проблема
Пре него што контактирате сервис, поновоview следећи уобичајени проблеми и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Јединица се не хлади | No power; Dirty filter; Blocked airflow; Refrigerant leak | Check power supply; Clean/replace filter; Clear obstructions; Contact service |
| Прекомерна бука/вибрације | Loose components; Fan imbalance; Compressor issue | Inspect for loose parts; Contact service |
| Цурење воде | Blocked condensate drain; Improper installation | Clear drain; Verify proper installation and sealing |
| Приказан је код грешке | Specific fault detected by controller | Refer to the controller's manual for error code interpretation and resolution. |
If the problem persists after attempting these solutions, contact Rittal technical support.
8. Спецификације
- Модел: Rittal 3304.500 Blue e Wallmount Cooling Unit
- Капацитет хлађења: 3753 БТУ/х
- Волtage: 230В
- фаза: 1 Фаза
- учесталост: 50/60 Хз
- Материјал: угљенични челик
- Димензије (В к Ш к Д): 37.4" x 15.7" x 10.2" (94.99 цм x 39.88 цм x 25.91 цм)
- Димензије производа (упаковано): 15.75 к 10.24 к 37.4 инча
- Тежина артикла: 86 фунти (39 кг)
- Произвођач: Ритал ДОО
- Број модела ставке: 3304500
9. Гаранција и подршка
For warranty information, technical support, or service inquiries, please contact Rittal LLC directly. Details regarding specific warranty terms and conditions are typically provided with the product documentation or can be found on the official Rittal website. When contacting support, please have your model number (3304500) and serial number readily available.





