Kasco 2400D025

Упутство за употребу одлеђивача за језера и баре Kasco 2400D025 1/2 HP

Модел: 2400Д025

1. Увод

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Kasco 2400D025 1/2 HP Lake & Pond De-icer. Please read all instructions carefully before use.

Производ је завршенview

The Kasco 2400D025 De-icer is designed to prevent ice formation in water bodies, protecting docks, boats, and aquatic life. It operates by circulating warmer bottom water to the surface, creating an ice-free area. This unit features a 1/2 HP motor, 120V operation, and includes a 25 ft electric power cord.

Шта је укључено

The Kasco 2400D025 package typically includes:

  • Kasco 2400D025 De-icer Unit
  • 25 Ft. Electric Power Cord
  • 2 Mooring Ropes (20 ft each)
Kasco 2400D025 De-icer unit, 25 ft cord, and two mooring ropes
Image 1: Contents of the Kasco 2400D025 De-icer package, showing the de-icer unit, power cord, and mooring ropes. The unit measures approximately 11 inches in height and 9.5 inches in width.

2. Безбедносне информације

Adherence to these safety guidelines is crucial for preventing injury and ensuring proper operation of the de-icer.

  • електрична безбедност: Always disconnect power before handling, installing, or performing maintenance on the unit. Ensure the power outlet is a grounded 120V GFCI (Ground Fault Circuit Interrupter) protected receptacle.
  • Безбедност воде: Never enter the water when the de-icer is operating. Maintain a safe distance from the open water area created by the de-icer.
  • Инсталација: Follow all installation instructions carefully. Ensure the unit is securely mounted or suspended to prevent accidental dislodgement.
  • Интегритет кабла: Regularly inspect the power cord for any damage. Do not use the unit if the cord is frayed, cut, or otherwise compromised.
  • Деца и кућни љубимци: Keep children and pets away from the de-icer and the open water area it creates.
  • Стручна помоћ: If you are unsure about any installation or maintenance procedures, consult a qualified electrician or marine professional.

3. Спецификације

Detailed technical specifications for the Kasco 2400D025 De-icer.

ФеатуреСпецификација
Број модела2400Д025
коњске снаге (ХП)КСНУМКС / КСНУМКС КС
Волtage120В
ФазаСингле Пхасе
Дужина кабла за напајање25 Фт.
РПМ1750 рпм
Димензије производа10 к 10 к 21 инча
Тежина артикла20 фунти
ПроизвођачКасцо Марине
ЦертификатиETL approved to CSA and UL standards

De-icer Sizing Guide

The effective open water diameter created by the de-icer varies based on air temperature and mounting orientation. Refer to the tables below for guidance.

De-icer sizing guide for air temperatures 0 to 34 degrees Fahrenheit
Image 2: De-icer sizing guide showing open water diameter for various HP models at air temperatures from 0°F to 34°F (-17.7°C to 1°C) for both angled and vertical orientations.
De-icer sizing guide for air temperatures below -20 degrees Fahrenheit
Image 3: De-icer sizing guide showing open water diameter for various HP models at air temperatures below -20°F (below -29°C) and -20°F to -1°F (-29°C to -18.3°C) for both angled and vertical orientations.

4. Подешавање и инсталација

Proper installation ensures optimal performance and safety of your de-icer.

Опције монтаже

The Kasco De-icer can be installed using two primary methods: vertical rope suspension (included) or an optional universal mount.

Vertical Rope Suspension (Included)

  • Warmer water is pulled up, creating an ice-free opening.
  • Place 4-6 ft. below the surface and 1 ft. off the bottom for best results.
  • Creates the largest ice-free area of protection.
Diagram showing a de-icer suspended vertically under a dock with ropes
Image 4: Diagram illustrating vertical rope suspension of the de-icer, showing water circulation patterns.

Universal Mount (Optional, PN: 243485)

  • Best in areas with waves, tides, or currents.
  • Place 4-6 ft. below the surface and 1 ft. off the bottom.
  • Simple Swivel allows easy rotation to direct water flow.
Diagram showing a de-icer mounted with a universal mount under a dock
Image 5: Diagram illustrating universal mount installation of the de-icer, showing angled water circulation patterns.

Општи кораци инсталације

  1. Позиционирање: Determine the optimal location for the de-icer to protect your desired area. Consider water depth and proximity to the dock or boat.
  2. суспензија: Attach the provided mooring ropes to the de-icer unit. Securely fasten the other ends of the ropes to a stable structure, such as a dock or pier. Adjust rope lengths to position the de-icer 4-6 feet below the surface and at least 1 foot off the bottom.
  3. Прикључак за напајање: Route the power cord safely, avoiding pinch points or areas where it could be damaged. Plug the 25 ft electric power cord into a 120V GFCI-protected outlet.
  4. Иницијална провера: Once plugged in, the de-icer should begin operating, creating a noticeable water flow.
Illustration of de-icers installed with both vertical rope suspension and universal mount
Image 6: Visual representation of de-icers installed using both vertical rope suspension and a universal mount, demonstrating their respective water flow patterns.

5. Упутство за употребу

The Kasco De-icer is designed for continuous duty and simple operation.

  • Активација: Once properly installed and connected to a 120V GFCI outlet, the de-icer will activate automatically.
  • Континуирани рад: The unit is built for continuous operation throughout the winter season to maintain an ice-free area.
  • Проток воде: The de-icer's high-efficiency motor and propeller create a directional flow of water, pushing warmer bottom water to the surface. This action prevents ice formation and helps oxygenate the water, benefiting aquatic life.
  • Надгледање: Periodically observe the de-icer's performance to ensure it is creating the desired open water area. Adjust positioning if necessary to optimize coverage.

6. Одржавање

Regular maintenance helps ensure the longevity and efficient operation of your Kasco De-icer.

  • Сезонски преглед: Before and after each winter season, thoroughly inspect the de-icer unit, power cord, and mooring ropes for any signs of wear, damage, or corrosion.
  • Чишћење: Disconnect power and remove the unit from the water. Clean any debris, algae, or mineral buildup from the propeller and housing. A soft brush and mild detergent can be used. Rinse thoroughly with fresh water.
  • Провера пропелера: Ensure the propeller spins freely and is not obstructed.
  • Складиштење: When not in use, clean the de-icer and store it in a dry, protected area away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your Kasco De-icer.

  • De-icer Not Running:
    • Check if the power cord is securely plugged into a functional 120V GFCI outlet.
    • Verify that the GFCI outlet has not tripped. Reset if necessary.
    • Проверите кабл за напајање да ли има видљивих оштећења. Ако је оштећен, прекините употребу и контактирајте корисничку подршку.
  • Reduced Open Water Area:
    • Ensure the de-icer is positioned at the correct depth (4-6 ft below surface, 1 ft off bottom).
    • Check for debris around the propeller that might be impeding water flow. Disconnect power before inspecting.
    • Consider extreme cold temperatures. Refer to the sizing guide in Section 3 for expected performance at various temperatures.
  • Необична бука или вибрација:
    • Disconnect power and inspect the propeller for any foreign objects or damage.
    • Ensure the unit is securely mounted or suspended and not vibrating against any structures.

If troubleshooting steps do not resolve the issue, please contact Kasco Marine customer support.

8. Гаранција и подршка

Kasco Marine products are built for reliable, long-lasting performance. For specific warranty details, please refer to the documentation included with your product or visit the official Kasco Marine webсајту.

Корисничка подршка

For technical assistance, parts, or warranty claims, please contact Kasco Marine directly. Contact information can typically be found on their official webсајту или у паковању производа.

Произвођач: Касцо Марине

Повезани документи - 2400Д025

Преview Упутства за замену спојнице кабла Kasco RGB за моделе 347033 и 347034
Детаљна упутства за замену и поновно повезивање Kasco RGB кабловских спојева за системе осветљења језерца, укључујући листе делова, безбедносне информације и водиче корак по корак за моделе 347033 и 347034.
Преview Упутство за инсталацију и употребу система за дифузну аерацију великог ормарића Kasco Robust-Aire
Свеобухватно упутство за инсталацију и употребу система за дифузну аерацију великих ормарића Kasco Robust-Aire™, које обухвата безбедност, спецификације, инсталацију, покретање, одржавање, решавање проблема и гаранцију. Укључује бројеве модела RA7-RA12 и RAH7-RAH12.
Преview Упутство за употребу и одржавање аератора великих површина Kasco 8400EA, 2.3EHA, 3.1EA, 3.3EHA
Званично упутство за употребу и одржавање Kasco аератора великих површина, укључујући моделе 8400EA, 2.3EHA, 3.1EA и 3.3EHA. Обухвата безбедност, спецификације, делове, монтажу, инсталацију, одржавање, решавање проблема и гаранцију.
Преview Kasco C-10 контролна табла: Упутство за инсталацију и употребу
Свеобухватно упутство за инсталацију и употребу контролне табле Kasco C-10, дизајниране за управљање системима за одлеђивање. Сазнајте више о мерама предострожности, подешавању, одржавању и информацијама о гаранцији.
Преview Kasco LED Cord Splice Replacement Instructions for Models 345037, 345065, 345066
Step-by-step instructions for replacing the LED cord splice on Kasco light kits, including safety information and parts list for models 345037, 345065, and 345066.
Преview Упутство за употребу и одржавање фонтане Kasco J серије 3400, 4400
Свеобухватни приручник за употребу и одржавање фонтана Kasco J серије (модели 3400 и 4400), који обухвата безбедност, спецификације, делове, уградњу млазница, монтажу, одржавање, решавање проблема и информације о гаранцији.