squishy circuits 21595 Components Explained V2
What is an LED?
- LEDs have polarity. The longer terminal connects to the dough with the red battery pack wire, and the shorter terminal connects to the dough with the black battery wire.
- When used with Squishy Circuits LEDs will break and need to be replaced over time. Expect a few hours of use
- Standard LEDs from other sellers will work but may not be as large, bright, etc.
- Classrooms or clubs may be interested in our long-LEDs wires.
Buzzers
- A buzzer emits a noise when electricity flows through it.
- Buzzers have polarity.
- Tape placed over the top reduces their volume.
Motors
- A motor creates motion when electricity flows through it.
- Motors spin clockwise or counterclockwise based on the wire orientation. They don’t have polarity.
Switch
A switch is placed within a circuit and either break or completes the circuit.
for additional ideas, recipes, and more, go to: squishycircuits.com
Documents / Resources
 |
squishy circuits 21595 Components Explained V2 [pdf] Instructions 21595 Components Explained V2, 21595, Components Explained, V2 |
